1 /* -*- c-file-style: "linux" -*-
3 Copyright (C) 1996-2001 by Andrew Tridgell <tridge@samba.org>
4 Copyright (C) Paul Mackerras 1996
5 Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
32 extern int am_generator;
34 extern int blocking_io;
35 extern int remove_sent_files;
36 extern int daemon_over_rsh;
37 extern int need_messages_from_generator;
38 extern int kluge_around_eof;
40 extern int log_got_error;
42 extern int orig_umask;
43 extern int copy_links;
44 extern int keep_dirlinks;
45 extern int preserve_hard_links;
46 extern int protocol_version;
48 extern int fuzzy_basis;
49 extern int relative_paths;
50 extern int rsync_port;
52 extern int make_backups;
53 extern int whole_file;
54 extern int read_batch;
55 extern int write_batch;
57 extern int batch_gen_fd;
58 extern int filesfrom_fd;
59 extern pid_t cleanup_child_pid;
60 extern struct stats stats;
61 extern char *files_from;
62 extern char *remote_filesfrom_file;
63 extern char *partial_dir;
64 extern char *basis_dir[];
65 extern char *rsync_path;
66 extern char *shell_cmd;
67 extern char *batch_name;
71 /* There's probably never more than at most 2 outstanding child processes,
72 * but set it higher, just in case. */
73 #define MAXCHILDPROCS 5
78 } pid_stat_table[MAXCHILDPROCS];
80 static void show_malloc_stats(void);
82 /****************************************************************************
83 wait for a process to exit, calling io_flush while waiting
84 ****************************************************************************/
85 void wait_process(pid_t pid, int *status)
90 while ((waited_pid = waitpid(pid, status, WNOHANG)) == 0) {
95 if (waited_pid == -1 && errno == ECHILD) {
96 /* status of requested child no longer available.
97 * check to see if it was processed by the sigchld_handler.
99 for (cnt = 0; cnt < MAXCHILDPROCS; cnt++) {
100 if (pid == pid_stat_table[cnt].pid) {
101 *status = pid_stat_table[cnt].status;
102 pid_stat_table[cnt].pid = 0;
108 /* TODO: If the child exited on a signal, then log an
109 * appropriate error message. Perhaps we should also accept a
110 * message describing the purpose of the child. Also indicate
111 * this to the caller so that thhey know something went
113 *status = WEXITSTATUS(*status);
116 /* This function gets called from all 3 processes. We want the client side
117 * to actually output the text, but the sender is the only process that has
118 * all the stats we need. So, if we're a client sender, we do the report.
119 * If we're a server sender, we write the stats on the supplied fd. If
120 * we're the client receiver we read the stats from the supplied fd and do
121 * the report. All processes might also generate a set of debug stats, if
122 * the verbose level is high enough (this is the only thing that the
123 * generator process and the server receiver ever do here). */
124 static void report(int f)
126 /* Cache two stats because the read/write code can change it. */
127 int64 total_read = stats.total_read;
128 int64 total_written = stats.total_written;
129 time_t t = time(NULL);
131 if (do_stats && verbose > 1) {
132 /* These come out from every process */
141 log_exit(0, __FILE__, __LINE__);
142 if (f == -1 || !am_sender)
148 write_longint(f, total_read);
149 write_longint(f, total_written);
150 write_longint(f, stats.total_size);
151 if (protocol_version >= 29) {
152 write_longint(f, stats.flist_buildtime);
153 write_longint(f, stats.flist_xfertime);
159 /* this is the client */
162 /* Read the first two in opposite order because the meaning of
163 * read/write swaps when switching from sender to receiver. */
164 total_written = read_longint(f);
165 total_read = read_longint(f);
166 stats.total_size = read_longint(f);
167 if (protocol_version >= 29) {
168 stats.flist_buildtime = read_longint(f);
169 stats.flist_xfertime = read_longint(f);
171 } else if (write_batch) {
172 /* The --read-batch process is going to be a client
173 * receiver, so we need to give it the stats. */
174 write_longint(batch_fd, total_read);
175 write_longint(batch_fd, total_written);
176 write_longint(batch_fd, stats.total_size);
177 if (protocol_version >= 29) {
178 write_longint(batch_fd, stats.flist_buildtime);
179 write_longint(batch_fd, stats.flist_xfertime);
184 rprintf(FINFO,"\nNumber of files: %d\n", stats.num_files);
185 rprintf(FINFO,"Number of files transferred: %d\n",
186 stats.num_transferred_files);
187 rprintf(FINFO,"Total file size: %.0f bytes\n",
188 (double)stats.total_size);
189 rprintf(FINFO,"Total transferred file size: %.0f bytes\n",
190 (double)stats.total_transferred_size);
191 rprintf(FINFO,"Literal data: %.0f bytes\n",
192 (double)stats.literal_data);
193 rprintf(FINFO,"Matched data: %.0f bytes\n",
194 (double)stats.matched_data);
195 rprintf(FINFO,"File list size: %d\n", stats.flist_size);
196 if (stats.flist_buildtime) {
198 "File list generation time: %.3f seconds\n",
199 (double)stats.flist_buildtime / 1000);
201 "File list transfer time: %.3f seconds\n",
202 (double)stats.flist_xfertime / 1000);
204 rprintf(FINFO,"Total bytes sent: %.0f\n",
205 (double)total_written);
206 rprintf(FINFO,"Total bytes received: %.0f\n",
210 if (verbose || do_stats) {
212 "\nsent %.0f bytes received %.0f bytes %.2f bytes/sec\n",
213 (double)total_written, (double)total_read,
214 (total_written + total_read)/(0.5 + (t - starttime)));
215 rprintf(FINFO, "total size is %.0f speedup is %.2f\n",
216 (double)stats.total_size,
217 (double)stats.total_size / (total_written+total_read));
226 * If our C library can get malloc statistics, then show them to FINFO
228 static void show_malloc_stats(void)
235 rprintf(FINFO, "\n" RSYNC_NAME "[%d] (%s%s%s) heap statistics:\n",
236 getpid(), am_server ? "server " : "",
237 am_daemon ? "daemon " : "", who_am_i());
238 rprintf(FINFO, " arena: %10ld (bytes from sbrk)\n",
240 rprintf(FINFO, " ordblks: %10ld (chunks not in use)\n",
242 rprintf(FINFO, " smblks: %10ld\n",
244 rprintf(FINFO, " hblks: %10ld (chunks from mmap)\n",
246 rprintf(FINFO, " hblkhd: %10ld (bytes from mmap)\n",
248 rprintf(FINFO, " allmem: %10ld (bytes from sbrk + mmap)\n",
249 (long)mi.arena + mi.hblkhd);
250 rprintf(FINFO, " usmblks: %10ld\n",
252 rprintf(FINFO, " fsmblks: %10ld\n",
254 rprintf(FINFO, " uordblks: %10ld (bytes used)\n",
256 rprintf(FINFO, " fordblks: %10ld (bytes free)\n",
258 rprintf(FINFO, " keepcost: %10ld (bytes in releasable chunk)\n",
260 #endif /* HAVE_MALLINFO */
264 /* Start the remote shell. cmd may be NULL to use the default. */
265 static pid_t do_cmd(char *cmd, char *machine, char *user, char *path,
266 int *f_in, int *f_out)
269 char *args[MAX_ARGS];
271 char *tok, *dir = NULL;
274 if (!read_batch && !local_server) {
275 char *rsh_env = getenv(RSYNC_RSH_ENV);
284 for (tok = strtok(cmd, " "); tok; tok = strtok(NULL, " ")) {
285 /* Comparison leaves rooms for server_options(). */
286 if (argc >= MAX_ARGS - 100) {
287 rprintf(FERROR, "internal: args[] overflowed in do_cmd()\n");
288 exit_cleanup(RERR_SYNTAX);
293 /* check to see if we've already been given '-l user' in
294 * the remote-shell command */
295 for (i = 0; i < argc-1; i++) {
296 if (!strcmp(args[i], "-l") && args[i+1][0] != '-')
301 /* remsh (on HPUX) takes the arguments the other way around */
302 args[argc++] = machine;
303 if (user && !(daemon_over_rsh && dash_l_set)) {
308 if (user && !(daemon_over_rsh && dash_l_set)) {
312 args[argc++] = machine;
315 args[argc++] = rsync_path;
317 if (blocking_io < 0) {
319 if ((cp = strrchr(cmd, '/')) != NULL)
323 if (strcmp(cp, "rsh") == 0 || strcmp(cp, "remsh") == 0)
327 server_options(args,&argc);
329 if (argc >= MAX_ARGS - 2) {
330 rprintf(FERROR, "internal: args[] overflowed in do_cmd()\n");
331 exit_cleanup(RERR_SYNTAX);
337 if (!daemon_over_rsh && path && *path)
343 rprintf(FINFO,"cmd=");
344 for (i = 0; i < argc; i++)
345 rprintf(FINFO, "%s ", safe_fname(args[i]));
350 int from_gen_pipe[2];
351 if (fd_pair(from_gen_pipe) < 0) {
352 rsyserr(FERROR, errno, "pipe");
353 exit_cleanup(RERR_IPC);
355 batch_gen_fd = from_gen_pipe[0];
356 *f_out = from_gen_pipe[1];
358 ret = -1; /* no child pid */
359 } else if (local_server) {
360 /* If the user didn't request --[no-]whole-file, force
361 * it on, but only if we're not batch processing. */
362 if (whole_file < 0 && !write_batch)
364 ret = local_child(argc, args, f_in, f_out, child_main);
366 ret = piped_child(args,f_in,f_out);
374 out_of_memory("do_cmd");
375 return 0; /* not reached */
379 static char *get_local_name(struct file_list *flist,char *name)
385 rprintf(FINFO,"get_local_name count=%d %s\n",
386 flist->count, NS(name));
391 if (do_stat(name,&st) == 0) {
392 if (S_ISDIR(st.st_mode)) {
393 if (!push_dir(name)) {
394 rsyserr(FERROR, errno, "push_dir#1 %s failed",
396 exit_cleanup(RERR_FILESELECT);
400 if (flist->count > 1) {
401 rprintf(FERROR,"ERROR: destination must be a directory when copying more than 1 file\n");
402 exit_cleanup(RERR_FILESELECT);
407 if (flist->count <= 1 && ((e = strlen(name)) <= 1 || name[e-1] != '/'))
410 if (do_mkdir(name,0777 & ~orig_umask) != 0) {
411 rsyserr(FERROR, errno, "mkdir %s failed", full_fname(name));
412 exit_cleanup(RERR_FILEIO);
415 rprintf(FINFO, "created directory %s\n", safe_fname(name));
422 if (!push_dir(name)) {
423 rsyserr(FERROR, errno, "push_dir#2 %s failed",
425 exit_cleanup(RERR_FILESELECT);
432 static void read_final_goodbye(int f_in, int f_out, int flist_count)
434 if (protocol_version < 29) {
439 /* Handle any keep-alive messages from --delete-after processing. */
440 while (read_int(f_in) == flist_count) {
441 if (read_shortint(f_in) != ITEM_IS_NEW)
442 return; /* Complain? */
443 write_int(f_out, flist_count);
444 write_shortint(f_out, ITEM_IS_NEW);
449 static void do_server_sender(int f_in, int f_out, int argc,char *argv[])
452 struct file_list *flist;
456 rprintf(FINFO, "server_sender starting pid=%ld\n",
460 if (am_daemon && lp_write_only(module_id)) {
461 rprintf(FERROR, "ERROR: module is write only\n");
462 exit_cleanup(RERR_SYNTAX);
465 if (am_daemon && lp_read_only(module_id) && remove_sent_files) {
467 "ERROR: --remove-sent-files cannot be used with a read-only module\n");
468 exit_cleanup(RERR_SYNTAX);
472 if (!relative_paths && !push_dir(dir)) {
473 rsyserr(FERROR, errno, "push_dir#3 %s failed",
475 exit_cleanup(RERR_FILESELECT);
480 if (strcmp(dir,".")) {
482 if (strcmp(dir,"/") == 0)
484 for (i = 0; i < argc; i++)
488 if (argc == 0 && (recurse || list_only)) {
494 flist = send_file_list(f_out,argc,argv);
495 if (!flist || flist->count == 0) {
499 io_start_buffering_in();
500 io_start_buffering_out();
502 send_files(flist,f_out,f_in);
503 io_flush(FULL_FLUSH);
505 if (protocol_version >= 24)
506 read_final_goodbye(f_in, f_out, flist->count);
507 io_flush(FULL_FLUSH);
512 static int do_recv(int f_in,int f_out,struct file_list *flist,char *local_name)
516 int error_pipe[2], name_pipe[2];
517 BOOL need_name_pipe = (basis_dir[0] || partial_dir || fuzzy_basis
518 || (inplace && make_backups)) && !dry_run;
520 /* The receiving side mustn't obey this, or an existing symlink that
521 * points to an identical file won't be replaced by the referent. */
524 if (preserve_hard_links)
525 init_hard_links(flist);
527 if (fd_pair(error_pipe) < 0
528 || (need_name_pipe && fd_pair(name_pipe) < 0)) {
529 rsyserr(FERROR, errno, "pipe failed in do_recv");
530 exit_cleanup(RERR_IPC);
533 io_flush(NORMAL_FLUSH);
535 if ((pid = do_fork()) == -1) {
536 rsyserr(FERROR, errno, "fork failed in do_recv");
537 exit_cleanup(RERR_IPC);
541 close(error_pipe[0]);
542 if (need_name_pipe) {
544 set_blocking(name_pipe[0]);
550 /* we can't let two processes write to the socket at one time */
551 close_multiplexing_out();
553 /* set place to send errors */
554 set_msg_fd_out(error_pipe[1]);
556 recv_files(f_in, flist, local_name, name_pipe[0]);
557 io_flush(FULL_FLUSH);
560 send_msg(MSG_DONE, "", 0);
561 io_flush(FULL_FLUSH);
563 /* Finally, we hang around until our parent kills us with a
564 * USR2 signal. If --delete-after was specified, we might get
565 * a keep-alive message over the socket, so handle that too. */
566 if (protocol_version >= 29) {
567 kluge_around_eof = -1;
568 while (read_int(f_in) == flist->count) {
569 if (read_shortint(f_in) != ITEM_IS_NEW)
570 break; /* Complain? */
579 close_multiplexing_in();
583 close(error_pipe[1]);
584 if (need_name_pipe) {
586 set_nonblocking(name_pipe[1]);
592 io_start_buffering_out();
594 set_msg_fd_in(error_pipe[0]);
596 generate_files(f_out, flist, local_name, name_pipe[1]);
599 io_flush(FULL_FLUSH);
600 if (protocol_version >= 24) {
601 /* send a final goodbye message */
602 write_int(f_out, -1);
604 io_flush(FULL_FLUSH);
608 wait_process(pid, &status);
613 static void do_server_recv(int f_in, int f_out, int argc,char *argv[])
616 struct file_list *flist;
617 char *local_name = NULL;
619 int save_verbose = verbose;
621 if (filesfrom_fd >= 0) {
622 /* We can't mix messages with files-from data on the socket,
623 * so temporarily turn off verbose messages. */
628 rprintf(FINFO, "server_recv(%d) starting pid=%ld\n",
629 argc, (long)getpid());
632 if (am_daemon && lp_read_only(module_id)) {
633 rprintf(FERROR,"ERROR: module is read only\n");
634 exit_cleanup(RERR_SYNTAX);
643 if (!am_daemon && !push_dir(dir)) {
644 rsyserr(FERROR, errno, "push_dir#4 %s failed",
646 exit_cleanup(RERR_FILESELECT);
650 io_start_buffering_in();
651 recv_filter_list(f_in);
653 if (filesfrom_fd >= 0) {
654 /* We need to send the files-from names to the sender at the
655 * same time that we receive the file-list from them, so we
656 * need the IO routines to automatically write out the names
657 * onto our f_out socket as we read the file-list. This
658 * avoids both deadlock and extra delays/buffers. */
659 io_set_filesfrom_fds(filesfrom_fd, f_out);
663 flist = recv_file_list(f_in);
664 verbose = save_verbose;
666 rprintf(FERROR,"server_recv: recv_file_list error\n");
667 exit_cleanup(RERR_FILESELECT);
671 if (strcmp(dir,".")) {
672 argv[0] += strlen(dir);
673 if (argv[0][0] == '/')
676 local_name = get_local_name(flist,argv[0]);
679 status = do_recv(f_in,f_out,flist,local_name);
680 exit_cleanup(status);
684 int child_main(int argc, char *argv[])
686 start_server(STDIN_FILENO, STDOUT_FILENO, argc, argv);
691 void start_server(int f_in, int f_out, int argc, char *argv[])
693 set_nonblocking(f_in);
694 set_nonblocking(f_out);
696 io_set_sock_fds(f_in, f_out);
697 setup_protocol(f_out, f_in);
699 if (protocol_version >= 23)
700 io_start_multiplex_out();
703 keep_dirlinks = 0; /* Must be disabled on the sender. */
704 if (need_messages_from_generator)
705 io_start_multiplex_in();
707 recv_filter_list(f_in);
708 do_server_sender(f_in, f_out, argc, argv);
710 do_server_recv(f_in, f_out, argc, argv);
717 * This is called once the connection has been negotiated. It is used
718 * for rsyncd, remote-shell, and local connections.
720 int client_run(int f_in, int f_out, pid_t pid, int argc, char *argv[])
722 struct file_list *flist = NULL;
723 int status = 0, status2 = 0;
724 char *local_name = NULL;
726 cleanup_child_pid = pid;
728 set_nonblocking(f_in);
729 set_nonblocking(f_out);
732 io_set_sock_fds(f_in, f_out);
733 setup_protocol(f_out,f_in);
735 if (protocol_version >= 23 && !read_batch)
736 io_start_multiplex_in();
738 /* We set our stderr file handle to blocking because ssh might have
739 * set it to non-blocking. This can be particularly troublesome if
740 * stderr is a clone of stdout, because ssh would have set our stdout
741 * to non-blocking at the same time (which can easily cause us to lose
742 * output from our print statements). This kluge shouldn't cause ssh
743 * any problems for how we use it. Note also that we delayed setting
744 * this until after the above protocol setup so that we know for sure
745 * that ssh is done twiddling its file descriptors. */
746 set_blocking(STDERR_FILENO);
749 keep_dirlinks = 0; /* Must be disabled on the sender. */
750 io_start_buffering_out();
751 if (!remote_filesfrom_file)
753 send_filter_list(f_out);
754 if (remote_filesfrom_file)
758 start_write_batch(f_out);
759 if (!read_batch) /* don't write to pipe */
760 flist = send_file_list(f_out,argc,argv);
763 rprintf(FINFO,"file list sent\n");
765 io_flush(NORMAL_FLUSH);
766 send_files(flist,f_out,f_in);
767 io_flush(FULL_FLUSH);
768 if (protocol_version >= 24)
769 read_final_goodbye(f_in, f_out, flist->count);
772 rprintf(FINFO,"client_run waiting on %d\n", (int) pid);
773 io_flush(FULL_FLUSH);
774 wait_process(pid, &status);
777 io_flush(FULL_FLUSH);
778 exit_cleanup(status);
781 if (need_messages_from_generator && !read_batch)
782 io_start_multiplex_out();
787 send_filter_list(read_batch ? -1 : f_out);
789 if (filesfrom_fd >= 0) {
790 io_set_filesfrom_fds(filesfrom_fd, f_out);
795 start_write_batch(f_in);
796 flist = recv_file_list(f_in);
797 if (!flist || flist->count == 0) {
798 rprintf(FINFO, "client: nothing to do: "
799 "perhaps you need to specify some filenames or "
800 "the --recursive option?\n");
804 local_name = get_local_name(flist,argv[0]);
806 status2 = do_recv(f_in,f_out,flist,local_name);
810 rprintf(FINFO,"client_run2 waiting on %d\n", (int) pid);
811 io_flush(FULL_FLUSH);
812 wait_process(pid, &status);
815 return MAX(status, status2);
818 static int copy_argv (char *argv[])
822 for (i = 0; argv[i]; i++) {
823 if (!(argv[i] = strdup(argv[i]))) {
824 rprintf (FERROR, "out of memory at %s(%d)\n",
835 * Start a client for either type of remote connection. Work out
836 * whether the arguments request a remote shell or rsyncd connection,
837 * and call the appropriate connection function, then run_client.
839 * Calls either start_socket_client (for sockets) or do_cmd and
840 * client_run (for ssh).
842 static int start_client(int argc, char *argv[])
845 char *shell_machine = NULL;
846 char *shell_path = NULL;
847 char *shell_user = NULL;
853 /* Don't clobber argv[] so that ps(1) can still show the right
855 if ((rc = copy_argv(argv)))
858 /* rsync:// always uses rsync server over direct socket connection */
859 if (strncasecmp(URL_PREFIX, argv[0], strlen(URL_PREFIX)) == 0
863 host = argv[0] + strlen(URL_PREFIX);
864 p = strchr(host,'/');
870 if (*host == '[' && (p = strchr(host, ']')) != NULL) {
876 p = strchr(host, ':');
878 rsync_port = atoi(p+1);
881 return start_socket_client(host, path, argc-1, argv+1);
884 if (!read_batch) { /* for read_batch, NO source is specified */
885 p = find_colon(argv[0]);
886 if (p) { /* source is remote */
887 if (remote_filesfrom_file
888 && remote_filesfrom_file != files_from + 1
889 && strncmp(files_from, argv[0], p-argv[0]+1) != 0) {
891 "--files-from hostname is not the same as the transfer hostname\n");
892 exit_cleanup(RERR_SYNTAX);
894 if (p[1] == ':') { /* double colon */
897 return start_socket_client(argv[0], p+2,
904 if (argc < 1) { /* destination required */
906 exit_cleanup(RERR_SYNTAX);
911 shell_machine = argv[0];
914 } else { /* source is local */
917 /* rsync:// destination uses rsync server over direct socket */
918 if (strncasecmp(URL_PREFIX, argv[argc-1], strlen(URL_PREFIX)) == 0) {
921 host = argv[argc-1] + strlen(URL_PREFIX);
922 p = strchr(host,'/');
928 if (*host == '[' && (p = strchr(host, ']')) != NULL) {
934 p = strchr(host, ':');
936 rsync_port = atoi(p+1);
939 return start_socket_client(host, path, argc-1, argv);
942 p = find_colon(argv[argc-1]); /* look in dest arg */
943 if (p && remote_filesfrom_file
944 && remote_filesfrom_file != files_from + 1
945 && strncmp(files_from, argv[argc-1], p-argv[argc-1]+1) != 0) {
947 "--files-from hostname is not the same as the transfer hostname\n");
948 exit_cleanup(RERR_SYNTAX);
950 if (!p) { /* no colon found, so src & dest are local */
952 if (remote_filesfrom_file) {
954 "--files-from cannot be remote when the transfer is local\n");
955 exit_cleanup(RERR_SYNTAX);
957 } else if (p[1] == ':') { /* double colon */
960 return start_socket_client(argv[argc-1], p+2,
969 exit_cleanup(RERR_SYNTAX);
973 shell_machine = NULL;
974 shell_path = argv[argc-1];
977 shell_machine = argv[argc-1];
982 } else { /* read_batch */
984 shell_path = argv[argc-1];
985 if (find_colon(shell_path)) {
986 rprintf(FERROR, "remote destination is not allowed with --read-batch\n");
987 exit_cleanup(RERR_SYNTAX);
992 p = strrchr(shell_machine,'@');
995 shell_user = shell_machine;
1001 rprintf(FINFO,"cmd=%s machine=%s user=%s path=%s\n",
1002 shell_cmd ? safe_fname(shell_cmd) : "",
1003 shell_machine ? safe_fname(shell_machine) : "",
1004 shell_user ? safe_fname(shell_user) : "",
1005 shell_path ? safe_fname(shell_path) : "");
1008 /* for remote source, only single dest arg can remain ... */
1009 if (!am_sender && argc > 1) {
1011 exit_cleanup(RERR_SYNTAX);
1014 /* ... or no dest at all */
1015 if (!am_sender && argc == 0)
1018 pid = do_cmd(shell_cmd,shell_machine,shell_user,shell_path,
1021 /* if we're running an rsync server on the remote host over a
1022 * remote shell command, we need to do the RSYNCD protocol first */
1023 if (daemon_over_rsh) {
1025 tmpret = start_inband_exchange(shell_user, shell_path,
1031 ret = client_run(f_in, f_out, pid, argc, argv);
1040 static RETSIGTYPE sigusr1_handler(UNUSED(int val))
1042 exit_cleanup(RERR_SIGNAL);
1045 static RETSIGTYPE sigusr2_handler(UNUSED(int val))
1047 if (log_got_error) _exit(RERR_PARTIAL);
1051 static RETSIGTYPE sigchld_handler(UNUSED(int val))
1056 /* An empty waitpid() loop was put here by Tridge and we could never
1057 * get him to explain why he put it in, so rather than taking it
1058 * out we're instead saving the child exit statuses for later use.
1059 * The waitpid() loop presumably eliminates all possibility of leaving
1060 * zombie children, maybe that's why he did it.
1062 while ((pid = waitpid(-1, &status, WNOHANG)) > 0) {
1063 /* save the child's exit status */
1064 for (cnt = 0; cnt < MAXCHILDPROCS; cnt++) {
1065 if (pid_stat_table[cnt].pid == 0) {
1066 pid_stat_table[cnt].pid = pid;
1067 pid_stat_table[cnt].status = status;
1077 * This routine catches signals and tries to send them to gdb.
1079 * Because it's called from inside a signal handler it ought not to
1080 * use too many library routines.
1082 * @todo Perhaps use "screen -X" instead/as well, to help people
1083 * debugging without easy access to X. Perhaps use an environment
1084 * variable, or just call a script?
1086 * @todo The /proc/ magic probably only works on Linux (and
1087 * Solaris?) Can we be more portable?
1089 #ifdef MAINTAINER_MODE
1090 const char *get_panic_action(void)
1092 const char *cmd_fmt = getenv("RSYNC_PANIC_ACTION");
1097 return "xterm -display :0 -T Panic -n Panic "
1098 "-e gdb /proc/%d/exe %d";
1103 * Handle a fatal signal by launching a debugger, controlled by $RSYNC_PANIC_ACTION.
1105 * This signal handler is only installed if we were configured with
1106 * --enable-maintainer-mode. Perhaps it should always be on and we
1107 * should just look at the environment variable, but I'm a bit leery
1108 * of a signal sending us into a busy loop.
1110 static RETSIGTYPE rsync_panic_handler(UNUSED(int whatsig))
1115 sprintf(cmd_buf, get_panic_action(),
1116 getpid(), getpid());
1118 /* Unless we failed to execute gdb, we allow the process to
1119 * continue. I'm not sure if that's right. */
1120 ret = system(cmd_buf);
1127 int main(int argc,char *argv[])
1130 int orig_argc = argc;
1131 char **orig_argv = argv;
1133 signal(SIGUSR1, sigusr1_handler);
1134 signal(SIGUSR2, sigusr2_handler);
1135 signal(SIGCHLD, sigchld_handler);
1136 #ifdef MAINTAINER_MODE
1137 signal(SIGSEGV, rsync_panic_handler);
1138 signal(SIGFPE, rsync_panic_handler);
1139 signal(SIGABRT, rsync_panic_handler);
1140 signal(SIGBUS, rsync_panic_handler);
1141 #endif /* def MAINTAINER_MODE */
1143 starttime = time(NULL);
1144 am_root = (MY_UID() == 0);
1146 memset(&stats, 0, sizeof(stats));
1150 exit_cleanup(RERR_SYNTAX);
1153 /* we set a 0 umask so that correct file permissions can be
1155 orig_umask = (int)umask(0);
1157 if (!parse_arguments(&argc, (const char ***) &argv, 1)) {
1158 /* FIXME: We ought to call the same error-handling
1159 * code here, rather than relying on getopt. */
1161 exit_cleanup(RERR_SYNTAX);
1164 signal(SIGINT,SIGNAL_CAST sig_int);
1165 signal(SIGHUP,SIGNAL_CAST sig_int);
1166 signal(SIGTERM,SIGNAL_CAST sig_int);
1168 /* Ignore SIGPIPE; we consistently check error codes and will
1170 signal(SIGPIPE, SIG_IGN);
1172 /* Initialize push_dir here because on some old systems getcwd
1173 * (implemented by forking "pwd" and reading its output) doesn't
1174 * work when there are other child processes. Also, on all systems
1175 * that implement getcwd that way "pwd" can't be found after chroot. */
1180 if (write_batch || read_batch) {
1182 write_batch_shell_file(orig_argc, orig_argv, argc);
1184 if (read_batch && strcmp(batch_name, "-") == 0)
1185 batch_fd = STDIN_FILENO;
1187 batch_fd = do_open(batch_name,
1188 write_batch ? O_WRONLY | O_CREAT | O_TRUNC
1189 : O_RDONLY, S_IRUSR | S_IWUSR);
1192 rsyserr(FERROR, errno, "Batch file %s open error",
1193 full_fname(batch_name));
1194 exit_cleanup(RERR_FILEIO);
1197 read_stream_flags(batch_fd);
1200 if (am_daemon && !am_server)
1201 return daemon_main();
1205 exit_cleanup(RERR_SYNTAX);
1209 set_nonblocking(STDIN_FILENO);
1210 set_nonblocking(STDOUT_FILENO);
1212 return start_daemon(STDIN_FILENO, STDOUT_FILENO);
1213 start_server(STDIN_FILENO, STDOUT_FILENO, argc, argv);
1216 ret = start_client(argc, argv);
1218 exit_cleanup(RERR_STARTCLIENT);