1 NEWS for rsync 2.6.7 (11 Mar 2006)
2 Protocol: 29 (unchanged)
7 - The letter 'D' in the itemized output was being used for both devices
8 (character or block) as well as other special files (such as fifos and
9 named sockets). This has changed to separate non-device special files
10 under the 'S' designation (e.g. "cS+++++++ path/fifo"). See also the
11 "--specials" option, below.
13 - The way rsync escapes unreadable characters has changed. First, rsync
14 now has support for recognizing valid multibyte character sequences in
15 your current locale, allowing it to escape fewer characters than before
16 for a locale such as UTF-8. Second, it now uses an escape idiom of
17 "\#123", which is the literal string "\#" followed by exactly 3 octal
18 digits. Rsync no longer doubles a backslash character in a filename
19 (e.g. it used to output "foo\\bar" when copying "foo\bar") -- now it only
20 escapes a backslash that is followed by a hash-sign and 3 digits (0-9)
21 (e.g. it will output "foo\#134#789" when copying "foo\#789"). See also
22 the --8-bit-output (-8) option, mentioned below.
24 Script writers: the local rsync is the one that outputs escaped names,
25 so if you need to support unescaping of filenames for older rsyncs, I'd
26 suggest that you parse the output of "rsync --version" and only use the
27 old unescaping rules for 2.6.5 and 2.6.6.
31 - Fixed a really old bug that caused --checksum (-c) to checksum all the
32 files encountered during the delete scan (ouch).
34 - Fixed a potential hang in a remote generator: when the receiver gets a
35 read-error on the socket, it now signals the generator about this so that
36 the generator does not try to send any of the terminating error messages
37 to the client (avoiding a potential hang in some setups).
39 - Made hard-links work with symlinks and devices again.
41 - If the sender gets an early EOF reading a source file, we propagate this
42 error to the receiver so that it can discard the file and try requesting
43 it again (which is the existing behavior for other kinds of read errors).
45 - If a device-file/special-file changes permissions, rsync now updates the
46 permissions without recreating the file.
48 - If the user specifies a remote-host for both the source and destination,
49 we now output a syntax error rather than trying to open the destination
50 hostspec as a filename.
52 - When --inplace creates a new destination file, rsync now creates it with
53 permissions 0600 instead of 0000 -- this makes restarting possible when
54 the transfer gets interrupted in the middle of sending a new file.
56 - Reject the combination of --inplace and --sparse since the sparse-output
57 algorithm doesn't work when overwriting existing data.
59 - Fixed the directory name in the error that is output when pop_dir()
62 - Really fixed the parsing of a "!" entry in .cvsignore files this time.
64 - If the generator gets a stat() error on a file, output it (this used to
65 require at least -vv for the error to be seen).
67 - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
68 the exit status properly and generate a better error.
70 - Fixed some glitches in the double-verbose output when using --copy-dest,
71 --link-dest, or --compare-dest. Also improved how the verbose output
72 handles hard-links (within the transfer) that had an up-to-date alternate
73 "dest" file, and copied files (via --copy-dest).
75 - Fixed the matching of the dont-compress items (e.g. *.gz) against files
76 that have a path component containing a slash.
78 - If code reading a filter/exclude file an EINTR error, rsync now clears
79 the error flag on the file handle so it can keep on reading.
81 - If --relative is active, the sending side cleans up trailing "/" or "/."
82 suffixes to avoid triggering a bug in older rsync versions. Also, we now
83 reject a ".." dir if it would be sent as a relative dir.
85 - If a non-directory is in the way of a directory and rsync is run with
86 --dry-run and --delete, rsync no longer complains about not being able
87 to opendir() the not-yet present directory.
89 - When --list-only is used and a non-existent local destination dir was
90 also specified as a destination, rsync no longer generates a warning
91 about being unable to create the missing directory.
93 - Fixed some problems with --relative --no-implied-dirs when the
94 destination directory did not yet exist: we can now create a symlink or
95 device when it is the first thing in the missing dir, and --fuzzy no
96 longer complains about being unable to open the missing dir.
98 - Fixed a bug where the --copy-links option would not affect implied
99 directories without --copy-unsafe-links (see --relative).
101 - Got rid of the need for --force to be used in some circumstances with
102 --delete-after (making it consistent with --delete-before/-during).
104 - Rsync now ignores the SIGXFSZ signal, just in case your OS sends this
105 when a file is too large (rsync handles the write error).
107 - Fixed a bug in the Proxy-Authorization header's base64-encoded value: it
108 was not properly padded with trailing '=' chars. This only affects a
109 user that need to use a password-authenticated proxy for an outgoing
110 daemon-rsync connection.
112 - If we're transferring an empty directory to a new name, rsync no longer
113 forces S_IWUSR if it wasn't already set, nor does it accidentally leave
116 - Fixed a bug in the debug output (-vvvvv) that could mention the wrong
117 checksum for the current file offset.
119 - Rsync no longer allows a single directory to be copied over a non-
120 directory destination arg.
124 - Added the --append option that makes rsync append data onto files that
125 are longer on the source than the destination (this includes new files).
127 - Added the --min-size=SIZE option to exclude small files from the
130 - Added the --compress-level option to allow you to set how aggressive
131 rsync's compression should be (this option implies --compress).
133 - Enhanced the parsing of the SIZE value for --min-size and --max-size to
134 allow easy entry of multiples of 1000 (instead of just multiples of 1024)
135 and off-by-one values too (e.g. --max-size=8mb-1).
137 - Added the --8-bit-output (-8) option, which tells rsync to avoid escaping
138 high-bit characters that it thinks are unreadable in the current locale.
140 - The new option --human-readable (-h) changes the output of --progress,
141 --stats, and the end-of-run summary to be easier to read. If repeated,
142 the units become powers of 1024 instead of powers of 1000. (The old
143 meaning of -h, as a shorthand for --help, still works as long as you
144 just use it on its own, as in "rsync -h".)
146 - If lutimes() and/or lchmod() are around, use them to allow the
147 preservation of attributes on symlinks.
149 - The --link-dest option now affects symlinks and devices (when possible).
151 - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" and
152 "post-xfer exec". These allow a command to be specified on a per-module
153 basis that will be run before and/or after a daemon-mode transfer. (See
154 the man page for a list of the environment variables that are set with
155 information about the transfer.)
157 - When using the --relative option, you can now insert a dot dir in
158 the source path to indicate where the replication of the source dirs
159 should start. For example, if you specify a source path of
160 rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
161 replicate the "baz/dir" part of the source path (note: a trailing
162 dot dir is unaffected unless it also has a trailing slash).
164 - Added some new --no-FOO options that make it easier to override unwanted
165 implied or default options. For example, "-a --no-o" (aka "--archive
166 --no-owner") can be used to turn off the preservation of file ownership
167 that is implied by -a.
169 - Added the --chmod=MODE option that allows the destination permissions to
170 be changed from the source permissions. E.g. --chmod=g+w,o-rwx
172 - Added the "incoming chmod" and "outgoing chmod" daemon options that allow
173 a module to specify what permissions changes should be applied to all
174 files copied to and from the daemon.
176 - Allow the --temp-dir option to be specified when starting a daemon, which
177 sets the default temporary directory for incoming files.
179 - If --delete is combined with --dirs without --recursive, rsync will now
180 delete in any directory whose content is being synchronized.
182 - If --backup is combined with --delete without --backup-dir (and without
183 --delete-excluded), we add a "protect" filter-rule to ensure that files
184 with the backup suffix are not deleted.
186 - The file-count stats that are output by --progress were improved to
187 better indicate what the numbers mean. For instance, the output:
188 "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
189 to be transferred, and we still need to check 8383 more files out of
192 - The include/exclude code now allows a dir/*** directive (with 3 trailing
193 stars) to match both the dir itself as well as all the content below the
194 dir (dir/** would not match the dir).
196 - Added the --prune-empty-dirs (-m) option that makes the receiving rsync
197 discard empty chains of directories from the file-list. This makes it
198 easier to selectively copy files from a source hierarchy and end up with
199 just the directories needed to hold the resulting files.
201 - If the --itemize-changes (-i) option is repeated, rsync now includes
202 unchanged files in the itemized output (similar to -vv, but without all
203 the other verbose messages that can get in the way). Of course, the
204 client must be version 2.6.7 for this to work, but the remote rsync only
205 needs to be 2.6.7 if you're pushing files.
207 - Added the --specials option to tell rsync to copy non-device special
208 files (which rsync now attempts even as a normal user). The --devices
209 option now requests the copying of just devices (character and block).
210 The -D option still requests both (e.g. --devices and --specials), -a
211 still implies -D, and non-root users still get a silent downgrade that
212 omits device copying.
214 - Added the --super option to make the receiver always attempt super-user
215 activities. This is useful for systems that allow things such as devices
216 to be created or ownership to be set without being UID 0, and is also
217 useful for someone who wants to ensure that errors will be output if the
218 receiving rsync isn't being run as root.
220 - Added the --sockopts option for those few who want to customize the TCP
221 options used to contact a daemon rsync.
223 - Added a way for the --temp-dir option to be combined with a partial-dir
224 setting that lets rsync avoid non-atomic updates (for those times when
225 --temp-dir is not being used because space is tight).
227 - A new support script, files-to-excludes, will transform a list of files
228 into a set of include/exclude directives that will copy those files.
230 - A new option, --executability (-E) can be used to preserve just the
231 execute bit on files, for those times when using the --perms option is
234 - The daemon now logs each connection and also each module-list request
237 - New log-format options: %M (modtime), %U (uid), %G (gid), and %B
238 (permission bits, e.g. "rwxr-xrwt").
240 - The --dry-run option no longer forces the enabling of --verbose.
242 - The --remove-sent-files option now does a better job of incrementally
243 removing the sent files on the sending side (older versions tended to
244 clump up all the removals at the end).
246 - A daemon now supersedes its minimal SIGCHLD handler with the standard
247 PID-remembering version after forking. This ensures that the generator
248 can get the child-exit status from the receiver.
250 - Use of the --bwlimit option no longer interferes with the remote rsync
251 sending error messages about invalid/refused options.
253 - Rsync no longer returns a usage error when used with one local source arg
254 and no destination: this now implies the --list-only option, just like
255 the comparable situation with a remote source arg.
257 - Added the --copy-dirlinks option, a more limited version of --copy-links.
259 - Various documentation improvements, including: a better synopsis, some
260 improved examples, a better discussion of the presence and absence of
261 --perms (including how it interacts with the new --executability and
262 --chmod options), an extended discussion of --temp-dir, an improved
263 discussion of --partial-dir, a better description of rsync's pattern
264 matching characters, an improved --no-implied-dirs section, and the
265 documenting of what the --stats option outputs.
267 - Various new and updated diffs in the patches dir, including: acls.diff,
268 xattrs.diff, atimes.diff, detect-renamed.diff, and slp.diff.
272 - We now use sigaction() and sigprocmask() if possible, and fall back on
273 signal() if not. Using sigprocmask() ensures that rsync enables all the
274 signals that it needs, just in case it was started in a masked state.
276 - Some buffer sizes were expanded a bit, particularly on systems where
277 MAXPATHLEN is overly small (e.g. cygwin).
279 - If io_printf() tries to format more data than fits in the buffer, exit
280 with an error instead of transmitting a truncated buffer.
282 - If a va_copy macro is defined, lib/snprintf.c will use it when defining
285 - Reduced the amount of stack memory needed for each level of directory
286 recursion by nearly MAXPATHLEN bytes.
288 - The wildmatch function was extended to allow an array of strings to be
289 supplied as the string to match. This allows the exclude code to do less
292 - Got rid of the safe_fname() function (and all the myriad calls) and
293 replaced it with a new function in the log.c code that filters all the
294 output going to the terminal.
296 - Unified the f_name() and the f_name_to() functions.
298 - Improved the hash-table code the sender uses to handle checksums to make
299 it use slightly less memory and run just a little faster.
303 - The diffs in the patches dir now require "patch -p1 <DIFF" instead of
304 the previous -p0. Also, the version included in the release tar now
305 affect generated files (e.g. configure, rsync.1, proto.h, etc.), so
306 it is no longer necessary to run autoconf and/or yodl unless you're
307 applying a patch that was checked out from CVS.
309 - Several diffs in the patches dir now use the proper --enable-FOO
310 configure option instead of --with-FOO to turn on the inclusion of
311 the newly patched feature.
313 - There is a new script, "prepare-source" than can be used to update the
314 various generated files (proto.h, configure, etc.) even before configure
315 has created the Makefile (this is mainly useful when patching the source
316 with a patch that doesn't affect generated files).
318 - The testsuite now sets HOME so that it won't be affected by a file such
322 NEWS for rsync 2.6.6 (28 Jul 2005)
323 Protocol: 29 (unchanged)
328 - The zlib code was upgraded to version 1.2.3 in order to make it more
329 secure. While the widely-publicized security problem in zlib 1.2.2 did
330 not affect rsync, another security problem surfaced that affects rsync's
335 - The setting of flist->high in clean_flist() was wrong for an empty list.
336 This could cause flist_find() to crash in certain rare circumstances
337 (e.g. if just the right directory setup was around when --fuzzy was
338 combined with --link-dest).
340 - The outputting of hard-linked files when verbosity was > 1 was not right:
341 (1) Without -i it would output the name of each hard-linked file as
342 though it had been changed; it now outputs a "is hard linked" message for
343 the file. (2) With -i it would output all dots for the unchanged
344 attributes of a hard-link; it now changes those dots to spaces, as is
345 done for other totally unchanged items.
347 - When backing up a changed symlink or device, get rid of any old backup
348 item so that we don't get an "already exists" error.
350 - A couple places that were comparing a local and a remote modification-
351 time were not honoring the --modify-window option.
353 - Fixed a bug where the 'p' (permissions) itemized-changes flag might get
354 set too often (if some non-significant mode bits differed).
356 - Fixed a really old, minor bug that could cause rsync to warn about being
357 unable to mkdir() a path that ends in "/." because it just created the
358 directory (required --relative, --no-implied-dirs, a source path that
359 ended in either a trailing slash or a trailing "/.", and a non-existing
360 destination dir to tickle the bug in a recent version).
364 - Made the "max verbosity" setting in the rsyncd.conf file settable on a
365 per-module basis (which now matches the documentation).
367 - The support/rrsync script has been upgraded to verify the args of options
368 that take args (instead of rejecting any such options). The script was
369 also changed to try to be more secure and to fix a problem in the parsing
370 of a pull operation that has multiple sources.
372 - Improved the documentation that explains the difference between a
373 normal daemon transfer and a daemon-over remote-shell transfer.
375 - Some of the diffs supplied in the patches dir were fixed and/or
380 - Made configure define NOBODY_USER (currently hard-wired to "nobody") and
381 NOBODY_GROUP (set to either "nobody" or "nogroup" depending on what we
382 find in the /etc/group file).
384 - Added a test to the test suite, itemized.test, that tests the output of
385 -i (log-format w/%i) and some double-verbose messages.
388 NEWS for rsync 2.6.5 (1 Jun 2005)
389 Protocol: 29 (unchanged)
394 - Non-printable chars in filenames are now output using backslash-
395 escaped characters rather than '?'s. Any non-printable character is
396 output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash
397 is now output as "\\". Rsync also uses your locale setting, which
398 can make it treat fewer high-bit characters as non-printable.
400 - If rsync received an empty file-list when pulling files, it would
401 output a "nothing to do" message and exit with a 0 (success) exit
402 status, even if the remote rsync returned an error (it did not do
403 this under the same conditions when pushing files). This was changed
404 to make the pulling behavior the same as the pushing behavior: we
405 now do the normal end-of-run outputting (depending on options) and
406 exit with the appropriate exit status.
410 - A crash bug was fixed when a daemon had its "path" set to "/", did
411 not have chroot enabled, and used some anchored excludes in the
414 - Fixed a bug in the transfer of a single file when -H is specified
415 (rsync would either infinite loop or perhaps crash).
417 - Fixed a case where the generator might try (and fail) to tweak the
418 write-permissions of a read-only directory in list-only mode (this
419 only caused an annoying warning message).
421 - If --compare-dest or --link-dest uses a locally-copied file as the
422 basis for an updated version, log this better when --verbose or -i
425 - Fixed the accidental disabling of --backup during the --delete-after
428 - Restored the ability to use the --address option in client mode (in
429 addition to its use in daemon mode).
431 - Make sure that some temporary progress information from the delete
432 processing does not get left on the screen when it is followed by a
435 - When --existing skips a directory with extra verbosity, refer to it
436 as a "directory", not a "file".
438 - When transferring a single file to a different-named file, any
439 generator messages that are source-file related no longer refer to
440 the file by the destination filename.
442 - Fixed a bug where hard-linking a group of files might fail if the
443 generator hasn't created a needed destination directory yet.
445 - Fixed a bug where a hard-linked group of files that is newly-linked
446 to a file in a --link-dest dir doesn't link the files from the rest
449 - When deleting files with the --one-file-system (-x) option set, rsync
450 no longer tries to remove files from inside a mount-point on the
451 receiving side. Also, we don't complain about being unable to remove
454 - Fixed a compatibility problem when using --cvs-ignore (-C) and
455 sending files to an older rsync without using --delete.
457 - Make sure that a "- !" or "+ !" include/exclude pattern does not
458 trigger the list-clearing action that is reserved for "!".
460 - Avoid a timeout in the generator when the sender/receiver aren't
461 handling the generator's checksum output quickly enough.
463 - Fixed the omission of some directories in the delete processing when
464 --relative (-R) was combined with a source path that had a trailing
467 - Fixed a case where rsync would erroneously delete some files and then
468 re-transfer them when the options --relative (-R) and --recursive
469 (-r) were both enabled (along with --delete) and a source path had a
472 - Make sure that --max-size doesn't affect a device or a symlink.
474 - Make sure that a system with a really small MAXPATHLEN does not cause
475 the buffers in readfd_unbuffered() to be too small to receive normal
476 messages. (This mainly affected Cygwin.)
478 - If a source pathname ends with a filename of "..", treat it as if
479 "../" had been specified (so that we don't copy files to the parent
480 dir of the destination).
482 - If --delete is combined with a file-listing rsync command (i.e. no
483 transfer is happening), avoid outputting a warning that we couldn't
486 - If --stats is specified with --delete-after, ensure that all the
487 "deleting" messages are output before the statistics.
489 - Improved one "if" in the deletion code that was only checking errno
490 for ENOTEMPTY when it should have also been checking for EEXIST (for
491 compatibility with OS variations).
495 - Added the --only-write-batch=FILE option that may be used (instead
496 of --write-batch=FILE) to create a batch file without doing any
497 actual updating of the destination. This allows you to divert all
498 the file-updating data away from a slow data link (as long as you
499 are pushing the data to the remote server when creating the batch).
501 - When the generator is taking a long time to fill up its output buffer
502 (e.g. if the transferred files are few, small, or missing), it now
503 periodically flushes the output buffer so that the sender/receiver
504 can get started on the files sooner rather than later.
506 - Improved the keep-alive code to handle a long silence between the
507 sender and the receiver that can occur when the sender is receiving
508 the checksum data for a large file.
510 - Improved the auth-errors that are logged by the daemon to include
511 some information on why the authorization failed: wrong user,
512 password mismatch, etc. (The client-visible message is unchanged!)
514 - Improved the client's handling of an "@ERROR" from a daemon so that
515 it does not complain about an unexpectedly closed socket (since we
516 really did expect the socket to close).
518 - If the daemon can't open the log-file specified in rsyncd.conf, fall
519 back to using syslog and log an appropriate warning. This is better
520 than what was typically a totally silent (and fatal) failure (since a
521 daemon is not usually run with the --no-detach option that was
522 necessary to see the error on stderr).
524 - The man pages now consistently refer to an rsync daemon as a "daemon"
525 instead of a "server" (to distinguish it from the server process in a
526 non-daemon transfer).
528 - Made a small change to the rrsync script (restricted rsync -- in the
529 support dir) to make a read-only server reject all --remove-* options
530 when sending files (to future-proof it against the possibility of
531 other similar options being added at some point).
535 - Rsync now calls setlocale(LC_CTYPE, ""). This enables isprint() to
536 better discern which filename characters need to be escaped in
537 messages (which should result in fewer escaped characters in some
540 - Improved the naming of the log-file open/reopen/close functions.
542 - Removed some protocol-compatibility code that was only needed to help
543 someone running a pre-release of 2.6.4.
547 - Added configure option "--disable-locale" to disable any use of
548 setlocale() in the binary.
550 - Fixed a bug in the SUPPORT{,_HARD}_LINKS #defines which prevented
551 rsync from being built without symlink or hard-link support.
553 - Only #define HAVE_REMSH if it is going to be set to 1.
555 - Configure now disables the use of mkstemp() under HP-UX (since they
556 refuse to fix its broken handling of large files).
558 - Configure now explicitly checks for the lseek64() function so that
559 the code can use HAVE_LSEEK64 instead of inferring lseek64()'s
560 presence based on the presence of the off64_t type.
562 - Configure no longer mentions the change in the default remote-shell
563 (from rsh to ssh) that occurred for the 2.6.0 release.
565 - Some minor enhancements to the test scripts.
567 - Added a few new *.diff files to the patches dir, including a patch
568 that enables the optional copying of extended attributes.
571 NEWS for rsync 2.6.4 (30 March 2005)
572 Protocol: 29 (changed)
577 - When rsync deletes a directory and outputs a verbose message about
578 it, it now appends a trailing slash to the name instead of (only
579 sometimes) outputting a preceding "directory " string.
581 - The --stats output will contain file-list time-statistics if both
582 sides are 2.6.4, or if the local side is 2.6.4 and the files are
583 being pushed (since the stats come from the sending side).
584 (Requires protocol 29 for a pull.)
586 - The "%o" (operation) log-format escape now has a third value (besides
587 "send" and "recv"): "del." (with trailing dot to make it 4 chars).
588 This changes the way deletions are logged in the daemon's log file.
590 - When the --log-format option is combined with --verbose, rsync now
591 avoids outputting the name of the file twice in most circumstances.
592 As long as the --log-format item does not refer to any post-transfer
593 items (such as %b or %c), the --log-format message is output prior to
594 the transfer, so --verbose is now the equivalent of a --log-format of
595 '%n%L' (which outputs the name and any link info). If the log output
596 must occur after the transfer to be complete, the only time the name
597 is also output prior to the transfer is when --progress was specified
598 (so that the name will precede the progress stats, and the full
599 --log-format output will come after).
601 - Non-printable characters in filenames are replaced with a '?' to
602 avoid corrupting the screen or generating empty lines in the output.
606 - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
607 was only treating it as a special token in an rsync include/exclude
610 - The combination of --verbose and --dry-run now mentions the full list
611 of changes that would be output without --dry-run.
613 - Avoid a mkdir warning when removing a directory in the destination
614 that already exists in the --backup-dir.
616 - An OS that has a binary mode for its files (such as cygwin) needed
617 setmode(fd, O_BINARY) called on the temp-file we opened with
618 mkstemp(). (Fix derived from cygwin's 2.6.3 rsync package.)
620 - Fixed a potential hang when verbosity is high, the client side is
621 the sender, and the file-list is large.
623 - Fixed a potential protocol-corrupting bug where the generator could
624 merge a message from the receiver into the middle of a multiplexed
625 packet of data if only part of that data had been written out to the
626 socket when the message from the generator arrived.
628 - We now check if the OS doesn't support using mknod() for creating
629 FIFOs and sockets, and compile-in some compatibility code using
630 mkfifo() and socket() when necessary.
632 - Fixed an off-by-one error in the handling of --max-delete=N. Also,
633 if the --max-delete limit is exceeded during a run, we now output a
634 warning about this at the end of the run and exit with a new error
637 - One place in the code wasn't checking if fork() failed.
639 - The "ignore nonreadable" daemon parameter used to erroneously affect
640 readable symlinks that pointed to a non-existent file.
642 - If the OS does not have lchown() and a chown() of a symlink will
643 affect the referent of a symlink (as it should), we no longer try
644 to set the user and group of a symlink.
646 - The generator now properly runs the hard-link loop and the dir-time
647 rewriting loop after we're sure that the redo phase is complete.
649 - When --backup was specified with --partial-dir=DIR, where DIR is a
650 relative path, the backup code was erroneously trying to backup a
651 file that was put into the partial-dir.
653 - If a file gets resent in a single transfer and the --backup option is
654 enabled along with --inplace, rsync no longer performs a duplicate
655 backup (it used to overwrite the first backup with the failed file).
657 - One call to flush_write_file() was not being checked for an error.
659 - The --no-relative option was not being sent from the client to a
662 - If an rsync daemon specified "dont compress = ..." for a file and the
663 client tried to specify --compress, the libz code was not handling a
664 compression level of 0 properly. This could cause a transfer failure
665 if the block-size for a file was large enough (e.g. rsync might have
666 exited with an error for large files).
668 - Fixed a bug that would sometimes surface when using --compress and
669 sending a file with a block-size larger than 64K (either manually
670 specified, or computed due to the file being really large). Prior
671 versions of rsync would sometimes fail to decompress the data
672 properly, and thus the transferred file would fail its verification.
674 - If a daemon can't open the specified log file (i.e. syslog is not
675 being used), die without crashing. We also output an error about
676 the failure on stderr (which will only be seen if --no-detach was
677 specified) and exit with a new error code (6).
679 - A local transfer no longer duplicates all its include/exclude options
680 (since the forked process already has a copy of the exclude list,
681 there's no need to send them a set of duplicates).
683 - The output of the items that are being updated by the generator (dirs,
684 symlinks, devices) is now intermingled in the proper order with the
685 output from the items that the receiver is updating (regular files)
686 when pulling. This misordering was particularly bad when --progress
687 was specified. (Requires protocol 29.)
689 - When --timeout is specified, lulls that occur in the transfer while
690 the generator is doing work that does not generate socket traffic
691 (looking for changed files, deleting files, doing directory-time
692 touch-ups, etc.) will cause a new keep-alive packet to be sent that
693 should keep the transfer going as long as the generator continues to
694 make progress. (Requires protocol 29.)
696 - The stat size of a device is not added to the total file size of the
697 items in the transfer (the size might be undefined on some OSes).
699 - Fixed a problem with refused-option messages sometimes not making it
700 back to the client side when a remote --files-from was in effect and
701 the daemon was the receiver.
703 - The --compare-dest option was not updating a file that differed in
704 (the preserved) attributes from the version in the compare-dest DIR.
706 - When rsync is copying files into a write-protected directory, fixed
707 the change-report output for the directory so that we don't report
708 an identical directory as changed.
712 - Rsync now supports popt's option aliases, which means that you can
713 use /etc/popt and/or ~/.popt to create your own option aliases.
715 - Added the --delete-during (--del) option which will delete files
716 from the receiving side incrementally as each directory in the
717 transfer is being processed. This makes it more efficient than the
718 default, before-the-transfer behavior, which is now also available as
719 --delete-before (and is still the default --delete-WHEN option that
720 will be chosen if --delete or --delete-excluded is specified without
721 a --delete-WHEN choice). All the --del* options infer --delete, so
722 an rsync daemon that refuses "delete" will still refuse to allow any
723 file-deleting options (including the new --remove-sent-files option).
725 - All the --delete-WHEN options are now more memory efficient:
726 Previously an duplicate set of file-list objects was created on the
727 receiving side for the entire destination hierarchy. The new
728 algorithm only creates one directory of objects at a time (for files
729 inside the transfer).
731 - Added the --copy-dest option, which works like --link-dest except
732 that it locally copies identical files instead of hard-linking them.
734 - Added support for specifying multiple --compare-dest, --copy-dest, or
735 --link-dest options, but only of a single type. (Promoted from the
736 patches dir and enhanced.) (Requires protocol 29.)
738 - Added the --max-size option. (Promoted from the patches dir.)
740 - The daemon-mode options are now separated from the normal rsync
741 options so that they can't be mixed together. This makes it
742 impossible to start a daemon that has improper default option values
743 (which could cause problems when a client connects, such as hanging
746 - The --bwlimit option may now be used in combination with --daemon
747 to specify both a default value for the daemon side and a value
748 that cannot be exceeded by a user-specified --bwlimit option.
750 - Added the "port" parameter to the rsyncd.conf file. (Promoted from
751 the patches dir.) Also added "address". The command-line options
752 take precedence over a config-file option, as expected.
754 - In _exit_cleanup(): when we are exiting with a partially-received
755 file, we now flush any data in the write-cache before closing the
758 - The --inplace support was enhanced to work with --compare-dest,
759 --link-dest, and (the new) --copy-dest options. (Requires protocol
762 - Added the --dirs (-d) option for an easier way to copy directories
763 without recursion. Any directories that are encountered are created
764 on the destination. Specifying a directory with a trailing slash
765 copies its immediate contents to the destination.
767 - The --files-from option now implies --dirs (-d).
769 - Added the --list-only option, which is mainly a way for the client to
770 put the server into listing mode without needing to resort to any
771 internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
772 for a non-recursive listing). This option is used automatically
773 (behind the scenes) when a modern rsync speaks to a modern daemon,
774 but may also be specified manually if you want to force the use of
775 the --list-only option over a remote-shell connection.
777 - Added the --omit-dir-times (-O) option, which will avoid updating
778 the modified time for directories when --times was specified. This
779 option will avoid an extra pass through the file-list at the end of
780 the transfer (to tweak all the directory times), which may provide
781 an appreciable speedup for a really large transfer. (Promoted from
784 - Added the --filter (-f) option and its helper option, -F. Filter
785 rules are an extension to the existing include/exclude handling
786 that also supports nested filter files as well as per-directory
787 filter files (like .cvsignore, but with full filter-rule parsing).
788 This new option was chosen in order to ensure that all existing
789 include/exclude processing remained 100% compatible with older
790 versions. Protocol 29 is needed for full filter-rule support, but
791 backward-compatible rules work with earlier protocol versions.
792 (Promoted from the patches dir and enhanced.)
794 - Added the --delay-updates option that puts all updated files into
795 a temporary directory (by default ".~tmp~", but settable via the
796 --partial-dir=DIR option) until the end of the transfer. This
797 makes the updates a little more atomic for a large transfer.
799 - If rsync is put into the background, any output from --progress is
802 - Documented the "max verbosity" setting for rsyncd.conf. (This
803 setting was added a couple releases ago, but left undocumented.)
805 - The sender and the generator now double-check the file-list index
806 they are given, and refuse to try to do a file transfer on a
807 non-file index (since that would indicate that something had gone
810 - Added the --itemize-changes (-i) option, which is a way to output a
811 more detailed list of what files changed and in what way. The effect
812 is the same as specifying a --log-format of "%i %n%L" (see both the
813 rsync and rsyncd.conf manpages). Works with --dry-run too.
815 - Added the --fuzzy (-y) option, which attempts to find a basis file
816 for a file that is being created from scratch. The current algorithm
817 only looks in the destination directory for the created file, but it
818 does attempt to find a match based on size/mod-time (in case the file
819 was renamed with no other changes) as well as based on a fuzzy
820 name-matching algorithm. This option requires protocol 29 because it
821 needs the new file-sorting order. (Promoted from patches dir and
822 enhanced.) (Requires protocol 29.)
824 - Added the --remove-sent-files option, which lets you move files
827 - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
828 enclosed in '[' and ']' (e.g. "[::1]"). (We already allowed IPv6
829 literals in the rsync://HOST:PORT/PATH format.)
831 - When rsync recurses to build the file list, it no longer keeps open
832 one or more directory handles from the dir's parent dirs.
834 - When building under windows, the default for --daemon is now to
835 avoid detaching, requiring the new --detach option to force rsync
838 - The --dry-run option can now be combined with either --write-batch or
839 --read-batch, allowing you to run a do-nothing test command to see
840 what would happen without --dry-run.
842 - The daemon's "read only" config item now sets an internal read_only
843 variable that makes extra sure that no write/delete calls on the
844 read-only side can succeed.
846 - The log-format % escapes can now have a numeric field width in
847 between the % and the escape letter (e.g. "%-40n %08p").
849 - Improved the option descriptions in the --help text.
853 - Added atomic-rsync to the support dir: a perl script that will
854 transfer some files using rsync, and then move the updated files into
855 place all at once at the end of the transfer. Only works when
856 pulling, and uses --link-dest and a parallel hierarchy of files to
859 - Added mnt-excl to the support dir: a perl script that takes the
860 /proc/mounts file and translates it into a set of excludes that will
861 exclude all mount points (even mapped mounts to the same disk). The
862 excludes are made relative to the specified source dir and properly
865 - Added savetransfer.c to the support dir: a C program that can make
866 a copy of all the data that flows over the wire. This lets you test
867 for data corruption (by saving the data on both the sending side and
868 the receiving side) and provides one way to debug a protocol error.
870 - Added rrsync to the support dir: this is an updated version of Joe
871 Smith's restricted rsync perl script. This helps to ensure that only
872 certain rsync commands can be run by an ssh invocation.
876 - Added better checking of the checksum-header values that come over
879 - Merged a variety of file-deleting functions into a single function so
880 that it is easier to maintain.
882 - Improved the type of some variables (particularly blocksize vars) for
883 consistency and proper size.
885 - Got rid of the uint64 type (which we didn't need).
887 - Use a slightly more compatible set of core #include directives.
889 - Defined int32 in a way that ensures that the build dies if we can't
890 find a variable with at least 32 bits.
892 PROTOCOL DIFFERENCES FOR VERSION 29:
894 - A 16-bit flag-word is transmitted after every file-list index. This
895 indicates what is changing between the sender and the receiver. The
896 generator now transmits an index and a flag-word to indicate when
897 dirs and symlinks have changed (instead of producing a message),
898 which makes the outputting of the information more consistent and
899 less prone to screen corruption (because the local receiver/sender is
900 now outputting all the file-change info messages).
902 - If a file is being hard-linked, the ITEM_XNAME_FOLLOWS bit is enabled
903 in the flag-word and the name of the file that was linked immediately
904 follows in vstring format (see below).
906 - If a file is being transferred with an alternate-basis file, the
907 ITEM_BASIS_TYPE_FOLLOWS bit is enabled in the flag-word and a single
908 byte follows, indicating what type of basis file was chosen. If that
909 indicates that a fuzzy-match was selected, the ITEM_XNAME_FOLLOWS bit
910 is set in the flag-word and the name of the match in vstring format
911 follows the basis byte. A vstring is a variable length string that
912 has its size written prior to the string, and no terminating null.
913 If the string is from 1-127 bytes, the length is a single byte. If
914 it is from 128-32767 bytes, the length is written as ((len >> 8) |
915 0x80) followed by (len % 0x100).
917 - The sending of exclude names is done using filter-rule syntax. This
918 means that all names have a prefixed rule indicator, even excludes
919 (which used to be sent as a bare pattern, when possible). The -C
920 option will include the per-dir .cvsignore merge file in the list of
921 filter rules so it is positioned correctly (unlike in some older
924 - Rsync sorts the filename list in a different way: it sorts the subdir
925 names after the non-subdir names for each dir's contents, and it
926 always puts a dir's contents immediately after the dir's name in the
927 list. (Previously an item named "foo.txt" would sort in between
928 directory "foo/" and "foo/bar".)
930 - When talking to a protocol 29 rsync daemon, a list-only request
931 is able to note this before the options are sent over the wire and
932 the new --list-only option is included in the options.
934 - When the --stats bytes are sent over the wire (or stored in a batch),
935 they now include two elapsed-time values: one for how long it took to
936 build the file-list, and one for how long it took to send it over the
937 wire (each expressed in thousandths of a second).
939 - When --delete-excluded is specified with some filter rules (AKA
940 excludes), a client sender will now initiate a send of the rules to
941 the receiver (older protocols used to omit the sending of excludes in
942 this situation since there were no receiver-specific rules that
943 survived --delete-excluded back then). Note that, as with all the
944 filter-list sending, only items that are significant to the other
945 side will actually be sent over the wire, so the filter-rule list
946 that is sent in this scenario is often empty.
948 - An index equal to the file-list count is sent as a keep-alive packet
949 from the generator to the sender, which then forwards it on to the
950 receiver. This normally invalid index is only a valid keep-alive
951 packet if the 16-bit flag-word that follows it contains a single bit
952 (ITEM_IS_NEW, which is normally an illegal flag to appear alone).
954 - A protocol-29 batch file includes a bit for the setting of the --dirs
955 option and for the setting of the --compress option. Also, the shell
956 script created by --write-batch will use the --filter option instead
957 of --exclude-from to capture any filter rules.
961 - Handle an operating system that use mkdev() in place of makedev().
963 - Improved configure to better handle cross-compiling.
966 NEWS for rsync 2.6.3 (30 Sep 2004)
967 Protocol: 28 (unchanged)
972 - A bug in the sanitize_path routine (which affects a non-chrooted
973 rsync daemon) could allow a user to craft a pathname that would get
974 transformed into an absolute path for certain options (but not for
975 file-transfer names). If you're running an rsync daemon with chroot
976 disabled, *please upgrade*, ESPECIALLY if the user privs you run
977 rsync under is anything above "nobody".
979 OUTPUT CHANGES (ATTN: those using a script to parse the verbose output):
981 - Please note that the 2-line footer (output when verbose) now uses the
982 term "sent" instead of "wrote" and "received" instead of "read". If
983 you are not parsing the numeric values out of this footer, a script
984 would be better off using the empty line prior to the footer as the
985 indicator that the verbose output is over.
987 - The output from the --stats option was similarly affected to change
988 "written" to "sent" and "read" to "received".
990 - Rsync ensures that a filename that contains a newline gets mentioned
991 with each newline transformed into a question mark (which prevents a
992 filename from causing an empty line to be output).
994 - The "backed up ..." message that is output when at least 2 --verbose
995 options are specified is now the same both with and without the
1000 - Fixed a crash bug that might appear when --delete was used and
1001 multiple source directories were specified.
1003 - Fixed a 32-bit truncation of the file length when generating the
1006 - The --backup code no longer attempts to create some directories
1007 over and over again (generating warnings along the way).
1009 - Fixed a bug in the reading of the secrets file (by the daemon) and
1010 the password file (by the client): the files no longer need to be
1011 terminated by a newline for their content to be read in.
1013 - If a file has a read error on the sending side or the reconstructed
1014 data doesn't match the expected checksum (perhaps due to the basis
1015 file changing during the transfer), the receiver will no longer
1016 retain the resulting file unless the --partial option was specified.
1017 (Note: for the read-error detection to work, neither side can be
1018 older than 2.6.3 -- older receivers will always retain the file, and
1019 older senders don't tell the receiver that the file had a read
1022 - If a file gets resent in a single transfer and the --backup option
1023 is enabled, rsync no longer performs a duplicate backup (it used to
1024 overwrite the original file in the backup area).
1026 - Files specified in the daemon's "exclude" or "exclude from" config
1027 items are now excluded from being uploaded (assuming that the module
1028 allows uploading at all) in addition to the old download exclusion.
1030 - Got rid of a potential hang in the receiver when near the end of a
1033 - When using --backup without a --backup-dir, rsync no longer preserves
1034 the modify time on directories. This avoids confusing NFS.
1036 - When --copy-links (-L) is specified, we now output a separate error
1037 for a symlink that has no referent instead of claiming that a file
1040 - The --copy-links (-L) option no longer has the side-effect of telling
1041 the receiving side to follow symlinks. See the --keep-dirlinks
1042 option (mentioned below) for a way to specify that behavior.
1044 - Error messages from the daemon server's option-parsing (such as
1045 refused options) are now successfully transferred back to the client
1046 (the server used to fail to send the message because the socket
1047 wasn't in the right state for the message to get through).
1049 - Most transfer errors that occur during a daemon transfer are now
1050 returned to the user in addition to being logged (some messages are
1051 intended to be daemon-only and are not affected by this).
1053 - Fixed a bug in the daemon authentication code when using one of the
1054 batch-processing options.
1056 - We try to work around some buggy IPv6 implementations that fail to
1057 implement IPV6_V6ONLY. This should fix the "address in use" error
1058 that some daemons get when running on an OS with a buggy IPv6
1059 implementation. Also, if the new code gets this error, we might
1060 suggest that the user specify --ipv4 or --ipv6 (if we think it will
1063 - When the remote rsync dies, make a better effort to recover any error
1064 messages it may have sent before dying (the local rsync used to just
1065 die with a socket-write error).
1067 - When using --delete and a --backup-dir that contains files that are
1068 hard-linked to their destination equivalents, rsync now makes sure
1069 that removed files really get removed (avoids a really weird rename()
1072 - Avoid a bogus run-time complaint about a lack of 64-bit integers when
1073 the int64 type is defined as an off_t and it actually has 64-bits.
1075 - Added a configure check for open64() without mkstemp64() so that we
1076 can avoid using mkstemp() when such a combination is encountered.
1077 This bypasses a problem writing out large temp files on OSes such as
1080 - Fixed an age-old crash problem with --read-batch on a local copy
1081 (rsync was improperly assuming --whole-file for the local copy).
1083 - When --dry-run (-n) is used and the destination directory does not
1084 exist, rsync now produces a correct report of files that would be
1085 sent instead of dying with a chdir() error.
1087 - Fixed a bug that could cause a slow-to-connect rsync daemon to die
1088 with an error instead of waiting for the connection to finish.
1090 - Fixed an ssh interaction that could cause output to be lost when the
1091 user chose to combine the output of rsync's stdout and stderr (e.g.
1096 - Added the --partial-dir=DIR option that lets you specify where to
1097 (temporarily) put a partially transferred file (instead of over-
1098 writing the destination file). E.g. --partial-dir=.rsync-partial
1099 Also added support for the RSYNC_PARTIAL_DIR environment variable
1100 that, when found, transforms a regular --partial option (such as
1101 the convenient -P option) into one that also specifies a directory.
1103 - Added --keep-dirlinks (-K), which allows you to symlink a directory
1104 onto another partition on the receiving side and have rsync treat it
1105 as matching a normal directory from the sender.
1107 - Added the --inplace option that tells rsync to write each destination
1108 file without using a temporary file. The matching of existing data
1109 in the destination file can be severely limited by this, but there
1110 are also cases where this is more efficient (such as appending data).
1111 Use only when needed (see the man page for more details).
1113 - Added the "write only" option for the daemon's config file.
1115 - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
1116 and documented all these options in the man page.
1118 - Improved the handling of the --bwlimit option so that it's less
1119 bursty, more accurate, and works properly over a larger range of
1122 - The rsync daemon-over-ssh code now looks for SSH_CONNECTION and
1123 SSH2_CLIENT in addition to SSH_CLIENT to figure out the IP address.
1125 - Added the --checksum-seed=N option for advanced users.
1127 - Batch writing/reading has a brand-new implementation that is simpler,
1128 fixes a few weird problems with the old code (such as no longer
1129 sprinkling the batch files into different dirs or even onto different
1130 systems), and is much less intrusive into the code (making it easier
1131 to maintain for the future). The new code generates just one data
1132 file instead of three, which makes it possible to read the batch on
1133 stdin via a remote shell. Also, the old requirement of forcing the
1134 same fixed checksum-seed for all batch processing has been removed.
1136 - If an rsync daemon has a module set with "list = no" (which hides its
1137 presence in the list of available modules), a user that fails to
1138 authenticate gets the same "unknown module" error that they would get
1139 if the module were actually unknown (while still logging the real
1140 error to the daemon's log file). This prevents fishing for module
1143 - The daemon's "refuse options" config item now allows you to match
1144 option names using wildcards and/or the single-letter option names.
1146 - Each transferred file now gets its permissions and modified-time
1147 updated before the temp-file gets moved into place. Previously, the
1148 finished file would have a very brief window where its permissions
1149 disallowed all group and world access.
1151 - Added the ability to parse a literal IPv6 address in an "rsync:" URL
1152 (e.g. rsync://[2001:638:500:101::21]:873/module/dir).
1154 - The daemon's wildcard expanding code can now handle more than 1000
1155 filenames (it's now limited by memory instead of having a hard-wired
1160 - Some cleanup in the exclude code has saved some per-exclude memory
1161 and made the code easier to maintain.
1163 - Improved the argv-overflow checking for a remote command that has a
1166 - Use rsyserr() in the various places that were still calling rprintf()
1167 with strerror() as an arg.
1169 - If an rsync daemon is listening on multiple sockets (to handle both
1170 IPv4 and IPv6 to a single port), we now close all the unneeded file
1171 handles after we accept a connection (we used to close just one of
1174 - Optimized the handling of larger block sizes (rsync used to slow to a
1175 crawl if the block size got too large).
1177 - Optimized away a loop in hash_search().
1179 - Some improvements to the sanitize_path() and clean_fname() functions
1180 makes them more efficient and produce better results (while still
1181 being compatible with the file-name cleaning that gets done on both
1182 sides when sending the file-list).
1184 - Got rid of alloc_sanitize_path() after adding a destination-buffer
1185 arg to sanitize_path() made it possible to put all the former's
1186 functionality into the latter.
1188 - The file-list that is output when at least 4 verbose options are
1189 specified reports the uid value on the sender even when rsync is
1190 not running as root (since we might be sending to a root receiver).
1194 - Added a "gen" target to rebuild most of the generated files,
1195 including configure, config.h.in, the man pages, and proto.h.
1197 - If "make proto" doesn't find some changes in the prototypes, the
1198 proto.h file is left untouched (its time-stamp used to always be
1201 - The variable $STRIP (that is optionally set by the install-strip
1202 target's rule) was changed to $INSTALL_STRIP because some systems
1203 have $STRIP already set in the environment.
1205 - Fixed a build problem when SUPPORT_HARD_LINKS isn't defined.
1207 - When cross-compiling, the gettimeofday() function is now assumed to
1208 be a modern version that takes two-args (since we can't test it).
1212 - The scripts in the testsuite dir were cleaned up a bit and a few
1215 - Some new diffs were added to the patches dir, and some accepted
1219 NEWS for rsync 2.6.2 (30 Apr 2004)
1220 Protocol: 28 (unchanged)
1221 Changes since 2.6.1:
1225 - Fixed a major bug in the sorting of the filenames when --relative
1226 is used for some sources (just sources such as "/" and "/*" were
1227 affected). This fix ensures that we ask for the right file-list
1228 item when requesting changes from the sender.
1230 - Rsync now checks the return value of the close() function to
1231 better report disk-full problems on an NFS file system.
1233 - Restored the old daemon-server behavior of logging error messages
1234 rather than returning them to the user. (A better long-term fix
1235 will be sought in the future.)
1237 - An obscure uninitialized-variable bug was fixed in the uid/gid
1238 code. (This bug probably had no ill effects.)
1242 - Got rid of the configure check for sys/sysctl.h (it wasn't used
1243 and was causing a problem on some systems). Also improved the
1244 broken-largefile-locking test to try to avoid failure due to an
1247 - Fixed a compile problem on systems that don't define
1250 - Fixed a compile problem in the popt source for compilers that
1251 don't support __attribute__.
1255 - Improved the testsuite's "merge" test to work on OSF1.
1257 - Two new diffs were added to the patches dir.
1260 NEWS for rsync 2.6.1 (26 Apr 2004)
1261 Protocol: 28 (changed)
1262 Changes since 2.6.0:
1266 - Paths sent to an rsync daemon are more thoroughly sanitized when
1267 chroot is not used. If you're running a non-read-only rsync
1268 daemon with chroot disabled, *please upgrade*, ESPECIALLY if the
1269 user privs you run rsync under is anything above "nobody".
1273 - Lower memory use, more optimal transfer of data over the socket,
1274 and lower CPU usage (see the INTERNAL section for details).
1276 - The RSYNC_PROXY environment variable can now contain a
1277 "USER:PASS@" prefix before the "HOST:PORT" information.
1280 - The --progress output now mentions how far along in the transfer
1281 we are, including both a count of files transferred and a
1282 percentage of the total file-count that we've processed. It also
1283 shows better current-rate-of-transfer and remaining-transfer-time
1286 - Documentation changes now attempt to describe some often mis-
1287 understood features more clearly.
1291 - When -x (--one-file-system) is combined with -L (--copy-links) or
1292 --copy-unsafe-links, no symlinked files are skipped, even if the
1293 referent file is on a different filesystem.
1295 - The --link-dest code now works properly for a non-root user when
1296 (1) the UIDs of the source and destination differ and -o was
1297 specified, or (2) when the group of the source can't be used on
1298 the destination and -g was specified.
1300 - Fixed a bug in the handling of -H (hard-links) that might cause
1301 the expanded PATH/NAME value of the current item to get
1302 overwritten (due to an expanded-name caching bug).
1304 - We now reset the "new data has been sent" flag at the start of
1305 each file we send. This makes sure that an interrupted transfer
1306 with the --partial option set doesn't keep a shorter temp file
1307 than the current basis file when no new data has been transferred
1308 over the wire for that file.
1310 - Fixed a byte-order problem in --batch-mode on big-endian machines.
1313 - When using --cvs-exclude, the exclude items we get from a
1314 per-directory's .cvsignore file once again only affect that one
1315 directory (not all following directories too). The items are also
1316 now properly word-split and parsed without any +/- prefix parsing.
1318 - When specifying the USER@HOST: prefix for a file, the USER part
1319 can now contain an '@', if needed (i.e. the last '@' is used to
1320 find the HOST, not the first).
1322 - Fixed some bugs in the handling of group IDs for non-root users:
1323 (1) It properly handles a group that the sender didn't have a name
1324 for (it would previously skip changing the group on any files in
1325 that group). (2) If --numeric-ids is used, rsync no longer
1326 attempts to set groups that the user doesn't have the permission
1329 - Fixed the "refuse options" setting in the rsyncd.conf file.
1331 - Improved the -x (--one-file-system) flag's handling of any mount-
1332 point directories we encounter. It is both more optimal (in that
1333 it no longer does a useless scan of the contents of the mount-
1334 point dirs) and also fixes a bug where a remapped mount of the
1335 original filesystem could get discovered in a subdir we should be
1338 - Rsync no longer discards a double-slash at the start of a filename
1339 when trying to open the file. It also no longer constructs names
1340 that start with a double slash (unless the user supplied them).
1342 - Path-specifying options to a daemon should now work the same with
1343 or without chroot turned on. Previously, such a option (such as
1344 --link-dest) would get its absolute path munged into a relative
1345 one if chroot was not on, making that setting fairly useless.
1346 Rsync now transforms the path into one that is based on the
1347 module's base dir when chroot is not enabled.
1349 - Fixed a compatibility problem interacting with older rsync
1350 versions that might send us an empty --suffix value without
1351 telling us that --backup-dir was specified.
1353 - The "hosts allow" option for a daemon-over-remote-shell process
1354 now has improved support for IPv6 addresses and a fix for systems
1355 that have a length field in their socket structs.
1357 - Fixed the ability to request an empty backup --suffix when sending
1358 files to an rsync daemon.
1362 - Most of the I/O is now buffered, which results in a pretty large
1363 speedup when running under MS Windows. (Craig Barratt)
1365 - Optimizations to the name-handling/comparing code have made some
1366 significant reductions in user-CPU time for large file sets.
1368 - Some cleanup of the variable types make the code more consistent.
1370 - Reduced memory requirements of hard link preservation.
1373 - Implemented a new algorithm for hard-link handling that speeds up
1374 the code significantly. (J.W. Schultz and Wayne Davison)
1376 - The --hard-link option now uses the first existing file in the
1377 group of linked files as the basis for the transfer. This
1378 prevents the sub-optimal transfer of a file's data when a new
1379 hardlink is added on the sending side and it sorts alphabetically
1380 earlier in the list than the files that are already present on the
1383 - Dropped support for protocol versions less than 20 (2.3.0 released
1384 15 Mar 1999) and activated warnings for protocols less than 25
1385 (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
1388 - More optimal data transmission for --hard-links (protocol 28).
1390 - More optimal data transmission for --checksum (protocol 28).
1392 - Less memory is used when --checksum is specified.
1394 - Less memory is used in the file list (a per-file savings).
1396 - The generator is now better about not modifying the file list
1397 during the transfer in order to avoid a copy-on-write memory
1398 bifurcation (on systems where fork() uses shared memory).
1399 Previously, rsync's shared memory would slowly become unshared,
1400 resulting in real memory usage nearly doubling on the receiving
1401 side by the end of the transfer. Now, as long as permissions
1402 are being preserved, the shared memory should remain that way
1403 for the entire transfer.
1405 - Changed hardlink info and file_struct + strings to use allocation
1406 pools. This reduces memory use for large file-sets and permits
1407 freeing memory to the OS. (J.W. Schultz)
1409 - The 2 pipes used between the receiver and generator processes
1410 (which are forked on the same machine) were reduced to 1 pipe and
1411 the protocol improved so that (1) it is now impossible to have the
1412 "redo" pipe fill up and hang rsync, and (2) trailing messages from
1413 the receiver don't get lost on their way through the generator
1414 over to the sender (which mainly affected hard-link messages and
1415 verbose --stats output).
1417 - Improved the internal uid/gid code to be more portable and a
1418 little more optimized.
1420 - The device numbers sent when using --devices are now sent as
1421 separate major/minor values with 32-bit accuracy (protocol 28).
1422 Previously, the copied devices were sent as a single 32-bit
1423 number. This will make inter-operation of 64-bit binaries more
1424 compatible with their 32-bit brethren (with both ends of the
1425 connection are using protocol 28). Note that optimizations in the
1426 binary protocol for sending the device numbers often results in
1427 fewer bytes being used than before, even though more precision is
1430 - Some cleanup of the exclude/include structures and its code made
1431 things clearer (internally), simpler, and more efficient.
1433 - The reading & writing of the file-list in batch-mode is now
1434 handled by the same code that sends & receives the list over the
1435 wire. This makes it much easier to maintain. (Note that the
1436 batch code is still considered to be experimental.)
1440 - The configure script now accepts --with-rsyncd-conf=PATH to
1441 override the default value of the /etc/rsyncd.conf file.
1443 - Fixed configure bug when running "./configure --disable-ipv6".
1445 - Fixed compilation problem on Tru64 Unix (having to do with
1446 sockaddr.sa_len and sockaddr.sin_len).
1450 - Fixed "make test" bug when build dir is not the source dir.
1452 - Added a couple extra diffs in the "patches" dir, removed the ones
1453 that got applied, and rebuilt the rest.
1456 NEWS for rsync 2.6.0 (1 Jan 2004)
1457 Protocol: 27 (changed)
1458 Changes since 2.5.7:
1462 * "ssh" is now the default remote shell for rsync. If you want to
1463 change this, configure like this: "./configure --with-rsh=rsh".
1465 * Added --files-from, --no-relative, --no-implied-dirs, and --from0.
1466 Note that --from0 affects the line-ending character for all the
1467 files read by the --*-from options. (Wayne Davison)
1469 * Length of csum2 is now per-file starting with protocol version
1472 * Per-file dynamic block size is now sqrt(file length). The
1473 per-file checksum size is determined according to an algorithm
1474 provided by Donovan Baarda which reduces the probability of rsync
1475 algorithm corrupting data and falling back using the whole md4
1476 checksums. (J.W. Schultz, Donovan Baarda)
1478 * The --stats option no longer includes the (debug) malloc summary
1479 unless the verbose option was specified at least twice.
1481 * Added a new error/warning code for when files vanish from the
1482 sending side. Made vanished source files not interfere with the
1483 file-deletion pass when --delete-after was specified.
1485 * Various trailing-info sections are now preceded by a newline.
1489 * Fixed several exclude/include matching bugs when using wild-cards.
1490 This has a several user-visible effects, all of which make the
1491 matching more consistent and intuitive. This should hopefully not
1492 cause anyone problems since it makes the matching work more like
1493 what people are expecting. (Wayne Davison)
1495 - A pattern with a "**" no longer causes a "*" to match slashes.
1496 For example, with "/*/foo/**", "foo" must be 2 levels deep.
1497 [If your string has BOTH "*" and "**" wildcards, changing the
1498 "*" wildcards to "**" will provide the old behavior in all
1501 - "**/foo" now matches at the base of the transfer (like /foo
1502 does). [Use "/**/foo" to get the old behavior in all versions.]
1504 - A non-anchored wildcard term floats to match beyond the base of
1505 the transfer. E.g. "CVS/R*" matches at the end of the path,
1506 just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*"
1507 to get the old behavior in all versions.]
1509 - Including a "**" in the match term causes it to be matched
1510 against the entire path, not just the name portion, even if
1511 there aren't any interior slashes in the term. E.g. "foo**bar"
1512 would exclude "/path/foo-bar" (just like before) as well as
1513 "/foo-path/baz-bar" (unlike before). [Use "foo*bar" to get the
1514 old behavior in all versions.]
1516 * The exclude list specified in the daemon's config file is now
1517 properly applied to the pulled items no matter how deep the
1518 user's file-args are in the source tree. (Wayne Davison)
1520 * For protocol version >= 27, mdfour_tail() is called when the
1521 block size (including checksum_seed) is a multiple of 64.
1522 Previously it was not called, giving the wrong MD4 checksum.
1525 * For protocol version >= 27, a 64 bit bit counter is used in
1526 mdfour.c as required by the RFC. Previously only a 32 bit bit
1527 counter was used, causing incorrect MD4 file checksums for
1528 file sizes >= 512MB - 4. (Craig Barratt)
1530 * Fixed a crash bug when interacting with older rsync versions and
1531 multiple files of the same name are destined for the same dir.
1534 * Keep tmp names from overflowing MAXPATHLEN.
1536 * Make --link-dest honor the absence of -p, -o, and -g.
1538 * Made rsync treat a trailing slash in the destination in a more
1541 * Fixed file I/O error detection. (John Van Essen)
1543 * Fixed bogus "malformed address {hostname}" message in rsyncd log
1544 when checking IP address against hostnames from "hosts allow"
1545 and "hosts deny" parameters in config file.
1547 * Print heap statistics when verbose >= 2 instead of when >= 1.
1549 * Fixed a compression (-z) bug when syncing a mostly-matching file
1550 that contains already-compressed data. (Yasuoka Masahiko and
1553 * Fixed a bug in the --backup code that could cause deleted files
1554 to not get backed up.
1556 * When the backup code makes new directories, create them with mode
1557 0700 instead of 0755 (since the directory permissions in the
1558 backup tree are not yet copied from the main tree).
1560 * Call setgroups() in a more portable manner.
1562 * Improved file-related error messages to better indicate exactly
1563 what pathname failed. (Wayne Davison)
1565 * Fixed some bugs in the handling of --delete and --exclude when
1566 using the --relative (-R) option. (Wayne Davison)
1568 * Fixed bug that prevented regular files from replacing
1569 special files and caused a directory in --link-dest or
1570 --compare-dest to block the creation of a file with the
1571 same path. A directory still cannot be replaced by a
1572 regular file unless --delete specified. (J.W. Schultz)
1574 * Detect and report when open or opendir succeed but read and
1575 readdir fail caused by network filesystem issues and truncated
1576 files. (David Norwood, Michael Brown, J.W. Schultz)
1578 * Added a fix that should give ssh time to restore the tty settings
1579 if the user presses Ctrl-C at an ssh password prompt.
1583 * Eliminated vestigial support for old versions that we stopped
1584 supporting. (J.W. Schultz)
1586 * Simplified some of the option-parsing code. (Wayne Davison)
1588 * Some cleanup made to the exclude code, as well as some new
1589 defines added to enhance readability. (Wayne Davison)
1591 * Changed the protocol-version code so that it can interact at a
1592 lower protocol level than the maximum supported by both sides.
1593 Added an undocumented option, --protocol=N, to force the value
1594 we advertise to the other side (primarily for testing purposes).
1598 NEWS for rsync 2.5.7 (4 Dec 2003)
1599 Protocol: 26 (unchanged)
1600 Changes since 2.5.6:
1604 * Fix buffer handling bugs. (Andrew Tridgell, Martin Pool, Paul
1605 Russell, Andrea Barisani)
1608 NEWS for rsync 2.5.6, aka "the dwd-between-jobs release" (26 Jan 2003)
1609 Protocol: 26 (unchanged)
1610 Changes since 2.5.5:
1614 * The --delete-after option now implies --delete. (Wayne Davison)
1616 * The --suffix option can now be used with --backup-dir. (Michael
1619 * Combining "::" syntax with the -rsh/-e option now uses the
1620 specified remote-shell as a transport to talk to a (newly-spawned)
1621 server-daemon. This allows someone to use daemon features, such
1622 as modules, over a secure protocol, such as ssh. (JD Paul)
1624 * The rsync:// syntax for daemon connections is now accepted in the
1627 * If the file name given to --include-from or --exclude-from is "-",
1628 rsync will read from standard input. (J.W. Schultz)
1630 * New option --link-dest which is like --compare-dest except that
1631 unchanged files are hard-linked in to the destination directory.
1634 * Don't report an error if an excluded file disappears during an
1635 rsync run. (Eugene Chupriyanov and Bo Kersey)
1637 * Added .svn to --cvs-exclude list to support subversion. (Jon
1640 * Properly support IPv6 addresses in the rsyncd.conf "hosts allow"
1641 and "hosts deny" fields. (Hideaki Yoshifuji)
1643 * Changed exclude file handling to permit DOS or MAC style line
1644 terminations. (J.W. Schultz)
1646 * Ignore errors from chmod when -p/-a/--preserve-perms is not set.
1651 * Fix "forward name lookup failed" errors on AIX 4.3.3. (John
1652 L. Allen, Martin Pool)
1654 * Generate each file's rolling-checksum data as we send it, not
1655 in a separate (memory-eating) pass before hand. This prevents
1656 timeout errors on really large files. (Stefan Nehlsen)
1658 * Fix compilation on Tru64. (Albert Chin, Zoong Pham)
1660 * Better handling of some client-server errors. (Martin Pool)
1662 * Fixed a crash that would occur when sending a list of files that
1663 contains a duplicate name (if it sorts to the end of the file
1664 list) and using --delete. (Wayne Davison)
1666 * Fixed the file-name duplicate-removal code when dealing with multiple
1667 dups in a row. (Wayne Davison)
1669 * Fixed a bug that caused rsync to lose the exit status of its child
1670 processes and sometimes return an exit code of 0 instead of showing
1671 an error. (David R. Staples, Dave Dykstra)
1673 * Fixed bug in --copy-unsafe-links that caused it to be completely
1674 broken. (Dave Dykstra)
1676 * Prevent infinite recursion in cleanup code under certain circumstances.
1677 (Sviatoslav Sviridov and Marc Espie)
1679 * Fixed a bug that prevented rsync from creating intervening directories
1680 when --relative-paths/-R is set. (Craig Barratt)
1682 * Prevent "Connection reset by peer" messages from Cygwin. (Randy O'Meara)
1686 * Many code cleanups and improved internal documentation. (Martin
1689 * Portability fixes. (Dave Dykstra and Wayne Davison)
1691 * More test cases. (Martin Pool)
1693 * Some test-case fixes. (Brian Poole, Wayne Davison)
1695 * Updated included popt to the latest vendor drop, version 1.6.4.
1698 * Updated config.guess and config.sub to latest versions; this
1699 means rsync should build on more platforms. (Paul Green)
1702 NEWS for rsync 2.5.5, aka Snowy River (2 Apr 2002)
1703 Protocol: 26 (unchanged)
1704 Changes since 2.5.4:
1708 * With --progress, when a transfer is complete show the time taken;
1709 otherwise show expected time to complete. (Cameron Simpson)
1711 * Make "make install-strip" works properly, and "make install"
1712 accepts a DESTDIR variable for help in building binary packages.
1713 (Peter Breitenlohner, Greg Louis)
1715 * If configured with --enable-maintainer-mode, then on receipt of
1716 a fatal signal rsync will try to open an xterm running gdb,
1717 similarly to Samba's "panic action" or GNOME's bug-buddy.
1723 * Fix situation where failure to fork (e.g. because out of process
1724 slots) would cause rsync to kill all processes owned by the
1725 current user. Yes, really! (Paul Haas, Martin Pool)
1727 * Fix test suite on Solaris. (Jos Backus, Martin Pool)
1729 * Fix minor memory leak in socket code. (Dave Dykstra, Martin
1732 * Fix --whole-file problem that caused it to be the default even
1733 for remote connections. (Martin Pool, Frank Schulz)
1735 * Work around bug in Mac OS X mkdir(2), which cannot handle
1737 <http://www.opensource.apple.com/bugs/X/BSD%20Kernel/2734739.html>
1740 * Improved network error handling. (Greg A. Woods)
1743 NEWS for rsync 2.5.4, aka "Imitation lizard skin" (13 Mar 2002)
1744 Protocol: 26 (unchanged)
1745 Changes since 2.5.3:
1749 * Additional fix for zlib double-free bug. (Martin Pool, Andrew
1750 Tridgell) (CVE CAN-2002-0059)
1754 * Merge in changes from zlib 1.1.3 to zlib 1.1.4. (Jos Backus)
1755 (Note that rsync still uses a custom version of zlib; you can
1756 not just link against a system library. See zlib/README.rsync)
1758 * Additional test cases for --compress. (Martin Pool)
1761 NEWS for rsync 2.5.3, aka "Happy 26" (11 Mar 2002)
1762 Protocol: 26 (unchanged)
1763 Changes since 2.5.2:
1767 * Make sure that supplementary groups are removed from a server
1768 process after changing uid and gid. (Ethan Benson) (Debian bug
1769 #132272, CVE CAN-2002-0080)
1773 * Fix zlib double-free bug. (Owen Taylor, Mark J Cox) (CVE
1776 * Fixed problem that in many cases caused the error message
1777 unexpected read size of 0 in map_ptr
1778 and resulted in the wrong data being copied.
1780 * Fixed compilation errors on some systems caused by the use of
1781 "unsigned int64" in rsync.h.
1783 * Fixed problem on systems such as Sunos4 that do not support realloc
1784 on a NULL pointer; error was "out of memory in flist_expand".
1786 * Fix for rsync server processes hanging around after the client
1787 unexpectedly disconnects. (Colin Walters) (Debian bug #128632)
1789 * Cope with BSD systems on which mkdir() will not accept a trailing
1794 * Merge in changes from zlib 1.1.2 to zlib 1.1.3. (Note that
1795 rsync still uses a custom version of zlib; you can not just link
1796 against a system library. See zlib/README.rsync)
1798 * Command to initiate connections is only shown with -vv, rather
1799 than -v as in 2.5.2. Output from plain -v is more similar to
1800 what was historically used so as not to break scripts that try
1801 to parse the output.
1803 * Added --no-whole-file and --no-blocking-io options (Dave Dykstra)
1805 * Made the --write-batch and --read-batch options actually work
1806 and added documentation in the man page (Jos Backus)
1808 * If the daemon is unable to fork a child to accept a connection,
1809 print an error message. (Colin Walters)
1812 NEWS for rsync 2.5.2 (26 Jan 2002)
1813 Protocol: 26 (changed)
1814 Changes since 2.5.1:
1818 * Signedness security patch from Sebastian Krahmer
1819 <krahmer@suse.de> -- in some cases we were not sufficiently
1820 careful about reading integers from the network.
1824 * Fix possible string mangling in log files.
1826 * Fix for setting local address of outgoing sockets.
1828 * Better handling of hardlinks and devices on platforms with
1829 64-bit dev_t or ino_t.
1831 * Name resolution on machines supporting IPv6 is improved.
1833 * Fix for device nodes. (dann frazier) (Debian #129135)
1837 * With -v, rsync now shows the command used to initiate an ssh/rsh
1840 * --statistics now shows memory heap usage on platforms that
1843 * "The Ted T'so school of program optimization": make progress
1844 visible and people will think it's faster. (With --progress,
1845 rsync will show you how many files it has seen as it builds the
1846 file_list, giving some indication that it has not hung.)
1848 * Improvements to batch mode support. This is still experimental
1849 but testing would be welcome. (Jos Backus)
1851 * New --ignore-existing option, patch previously distributed with
1852 Vipul's Razor. (Debian #124286)
1855 NEWS for rsync 2.5.1 (3 Jan 2002)
1856 Protocol: 25 (unchanged)
1857 Changes since 2.5.0:
1861 * Fix for segfault in --daemon mode configuration parser. (Paul
1864 * Correct string<->address parsing for both IPv4 and 6.
1865 (YOSHIFUJI Hideaki, SUMIKAWA Munechika and Jun-ichiro "itojun"
1868 * Various fixes for IPv6 support. (Dave Dykstra)
1870 * rsync.1 typo fix. (Matt Kraai)
1872 * Test suite typo fixes. (Tom Schmidt)
1874 * rsync.1 grammar and clarity improvements. (Edward
1877 * Correction to ./configure tests for inet_ntop. (Jeff Garzik)
1881 * --progress and -P now show estimated data transfer rate (in a
1882 multiple of bytes/s) and estimated time to completion. (Rik
1885 * --no-detach option, required to run as a W32 service and also
1886 useful when running on Unix under daemontools, AIX's SRC, or a
1887 debugger. (Max Bowsher, Jos Backus)
1889 * Clearer error messages for some conditions.
1892 NEWS for rsync 2.5.0 (30 Nov 2001)
1893 Protocol: 25 (changed)
1894 Changes since 2.4.6:
1898 * Martin Pool <mbp@samba.org> is now a co-maintainer.
1902 * Support for LSB-compliant packaging <http://www.linuxbase.org/>
1904 * Shell wildcards are allowed in "auth users" lines.
1906 * Merged UNC rsync+ patch to support creation of standalone patch
1907 sets. By Bert J. Dempsey and Debra Weiss, updated by Jos
1908 Backus. <http://www.ils.unc.edu/i2dsi/unc_rsync+.html>
1910 * IPv6 support based on a patch from KAME.net, on systems
1911 including modern versions of Linux, Solaris, and HP-UX. Also
1912 includes IPv6 compatibility functions for old OSs by the
1913 Internet Software Consortium, Paul Vixie, the OpenSSH
1914 portability project, and OpenBSD.
1918 * Include/exclude cluestick: with -vv, print out whether files are
1919 included or excluded and why.
1921 * Many error messages have more friendly explanations and more
1924 * Manual page improvements plus scanty protocol documentation.
1926 * When running as --daemon in the background and using a "log
1927 file" rsyncd.conf directive, close the log file every time it is
1928 open when going to sleep on the socket. This allows the log
1929 file to get cleaned out by another process.
1931 * Change to using libpopt rather than getopt for processing
1932 options. This makes the code cleaner and the behaviour more
1933 consistent across platforms. popt is included and built if not
1934 installed on the platform.
1936 * More details in --version, including note about whether 64-bit
1937 files, symlinks and hardlinks are supported.
1939 * MD4 code may use less CPU cycles.
1941 * Use mkstemp on systems where it is secure. If we use mktemp,
1942 explain that we do it in a secure way.
1944 * --whole-file is the default when source and target are on the
1949 * Fix for various bugs causing rsync to hang.
1951 * Attempt to fix Large File Summit support on AIX.
1953 * Attempt to fix error handling lockup bug.
1955 * Give a non-0 exit code if *any* of the files we have been asked
1956 to transfer fail to transfer.
1958 * For log messages containing ridiculously long strings that might
1959 overflow a buffer rsync no longer aborts, but rather prints an
1960 ellipsis at the end of the string. (Patch from Ed Santiago.)
1964 * Improved support for UNICOS (tested on Cray T3E and Cray SV1)
1966 * autoconf2.52 (or later) is now required to rebuild the autoconf
1967 scripts. It is not required to simply build rsync.
1969 * Platforms thought to work in this release:
1971 Cray SV1 UNICOS 10.0.0.8 cc
1972 Debian Linux 2.2 UltraSparc gcc
1973 Debian Linux testing/unstable ARM gcc
1974 FreeBSD 3.3-RELEASE i386 cc
1975 FreeBSD 4.1.1-RELEASE i386 cc
1976 FreeBSD 4.3-STABLE i386 cc
1977 HP PA-RISC HP-UX 10.20 gcc
1978 HP PA-RISC HP-UX 11.11 cc
1981 Mac OS X PPC (--disable-ipv6) cc
1983 NetBSD Current i386 cc
1984 OpenBSD 2.5 Sparc gcc
1986 OpenBSD Current i386 cc
1988 RedHat 6.2 i386 insure++
1990 RedHat 7.1 i386 (Kernel 2.4.10) gcc
1991 Slackware 8.0 i686 (Kernel 2.4.10)
1992 Solaris 8 UltraSparc cc
1993 Solaris 8 UltraSparc gcc
1995 SuSE 7.1 i386 gcc2.95.2
1996 SuSE 7.1 ppc gcc2.95.2
1997 i386-pc-sco3.2v5.0.5 cc
1998 i386-pc-sco3.2v5.0.5 gcc
1999 powerpc-ibm-aix4.3.3.0 cc
2000 i686-unknown-sysv5UnixWare7.1.0 gcc
2001 i686-unknown-sysv5UnixWare7.1.0 cc
2005 * The existing test.sh script by Phil Hands has been merged into a
2006 test framework that works from both "make check" and the Samba
2009 Partial Protocol History
2010 RELEASE DATE VER. DATE OF COMMIT* PROTOCOL
2011 11 Mar 2006 2.6.7 29
2012 28 Jul 2005 2.6.6 29
2013 01 Jun 2005 2.6.5 29
2014 30 Mar 2005 2.6.4 17 Jan 2005 29
2015 30 Sep 2004 2.6.3 28
2016 30 Apr 2004 2.6.2 28
2017 26 Apr 2004 2.6.1 08 Jan 2004 28
2018 01 Jan 2004 2.6.0 10 Apr 2003 27 (MAX=40)
2019 04 Dec 2003 2.5.7 26
2020 26 Jan 2003 2.5.6 26
2021 02 Apr 2002 2.5.5 26
2022 13 Mar 2002 2.5.4 26
2023 11 Mar 2002 2.5.3 26
2024 26 Jan 2002 2.5.2 11 Jan 2002 26
2025 03 Jan 2002 2.5.1 25
2026 30 Nov 2001 2.5.0 23 Aug 2001 25
2027 06 Sep 2000 2.4.6 24
2028 19 Aug 2000 2.4.5 24
2029 29 Jul 2000 2.4.4 24
2030 09 Apr 2000 2.4.3 24
2031 30 Mar 2000 2.4.2 24
2032 30 Jan 2000 2.4.1 29 Jan 2000 24
2033 29 Jan 2000 2.4.0 28 Jan 2000 23
2034 25 Jan 2000 2.3.3 23 Jan 2000 22
2035 08 Nov 1999 2.3.2 26 Jun 1999 21
2036 06 Apr 1999 2.3.1 20
2037 15 Mar 1999 2.3.0 15 Mar 1999 20
2038 25 Nov 1998 2.2.1 19
2039 03 Nov 1998 2.2.0 19
2040 09 Sep 1998 2.1.1 19
2041 20 Jul 1998 2.1.0 19
2042 17 Jul 1998 2.0.19 19
2043 18 Jun 1998 2.0.17 19
2044 01 Jun 1998 2.0.16 19
2045 27 May 1998 2.0.13 27 May 1998 19
2046 26 May 1998 2.0.12 18
2047 22 May 1998 2.0.11 18
2048 18 May 1998 2.0.9 18 May 1998 18
2049 17 May 1998 2.0.8 17
2050 15 May 1998 2.0.1 17
2051 14 May 1998 2.0.0 17
2052 17 Apr 1998 1.7.4 17
2053 13 Apr 1998 1.7.3 17
2054 05 Apr 1998 1.7.2 17
2055 26 Mar 1998 1.7.1 17
2056 26 Mar 1998 1.7.0 26 Mar 1998 17 (MAX=30)
2057 13 Jan 1998 1.6.9 13 Jan 1998 15 (MAX=20)
2059 * DATE OF COMMIT is the date the protocol change was committed to CVS.
Matt McCutchen's Web Site / rsync / rsync.git / blob