Properly punctuate "etc." and changed all occurrences of "IO" to "I/O".

diff --git a/rsync.yo b/rsync.yo
index 6aaaecd..1c3ddef 100644 (file)
--- a/rsync.yo
+++ b/rsync.yo
@@ -126,7 +126,7 @@ quote(rsync -avz foo:src/bar /data/tmp)
 This would recursively transfer all files from the directory src/bar on the
 machine foo into the /data/tmp/bar directory on the local machine. The
 files are transferred in "archive" mode, which ensures that symbolic
 This would recursively transfer all files from the directory src/bar on the
 machine foo into the /data/tmp/bar directory on the local machine. The
 files are transferred in "archive" mode, which ensures that symbolic

-links, devices, attributes, permissions, ownerships etc are preserved
+links, devices, attributes, permissions, ownerships, etc. are preserved

 in the transfer.  Additionally, compression will be used to reduce the
 size of data portions of the transfer.
 
 in the transfer.  Additionally, compression will be used to reduce the
 size of data portions of the transfer.
 


@@ -312,12 +312,12 @@ verb(
      --delete                delete files that don't exist on sender
      --delete-excluded       also delete excluded files on receiver
      --delete-after          receiver deletes after transfer, not before
      --delete                delete files that don't exist on sender
      --delete-excluded       also delete excluded files on receiver
      --delete-after          receiver deletes after transfer, not before

-     --ignore-errors         delete even if there are IO errors
+     --ignore-errors         delete even if there are I/O errors

      --max-delete=NUM        don't delete more than NUM files
      --partial               keep partially transferred files
      --force                 force deletion of dirs even if not empty
      --numeric-ids           don't map uid/gid values by user/group name
      --max-delete=NUM        don't delete more than NUM files
      --partial               keep partially transferred files
      --force                 force deletion of dirs even if not empty
      --numeric-ids           don't map uid/gid values by user/group name

-     --timeout=TIME          set IO timeout in seconds
+     --timeout=TIME          set I/O timeout in seconds

  -I, --ignore-times          turn off mod time & file size quick check
      --size-only             ignore mod time for quick check (use size)
      --modify-window=NUM     compare mod times with reduced accuracy
  -I, --ignore-times          turn off mod time & file size quick check
      --size-only             ignore mod time for quick check (use size)
      --modify-window=NUM     compare mod times with reduced accuracy


@@ -339,7 +339,7 @@ verb(
      --address=ADDRESS       bind to the specified address
      --config=FILE           specify alternate rsyncd.conf file
      --port=PORT             specify alternate rsyncd port number
      --address=ADDRESS       bind to the specified address
      --config=FILE           specify alternate rsyncd.conf file
      --port=PORT             specify alternate rsyncd port number

-     --blocking-io           use blocking IO for the remote shell
+     --blocking-io           use blocking I/O for the remote shell

      --no-blocking-io        turn off --blocking-io
      --stats                 give some file transfer stats
      --progress              show progress during transfer
      --no-blocking-io        turn off --blocking-io
      --stats                 give some file transfer stats
      --progress              show progress during transfer


@@ -569,7 +569,7 @@ This option can be dangerous if used incorrectly!  It is a very good idea
 to run first using the dry run option (-n) to see what files would be
 deleted to make sure important files aren't listed.
 
 to run first using the dry run option (-n) to see what files would be
 deleted to make sure important files aren't listed.
 

-If the sending side detects any IO errors then the deletion of any
+If the sending side detects any I/O errors then the deletion of any

 files at the destination will be automatically disabled. This is to
 prevent temporary filesystem failures (such as NFS errors) on the
 sending side causing a massive deletion of files on the
 files at the destination will be automatically disabled. This is to
 prevent temporary filesystem failures (such as NFS errors) on the
 sending side causing a massive deletion of files on the


@@ -586,7 +586,7 @@ sufficient space on the receiving filesystem. If you want to delete
 after transferring, use the --delete-after switch. Implies --delete.
 
 dit(bf(--ignore-errors)) Tells --delete to go ahead and delete files
 after transferring, use the --delete-after switch. Implies --delete.
 
 dit(bf(--ignore-errors)) Tells --delete to go ahead and delete files

-even when there are IO errors.
+even when there are I/O errors.

 
 dit(bf(--force)) This options tells rsync to delete directories even if
 they are not empty when they are to be replaced by non-directories.  This
 
 dit(bf(--force)) This options tells rsync to delete directories even if
 they are not empty when they are to be replaced by non-directories.  This


@@ -760,7 +760,7 @@ If the source system is a daemon using chroot, or if a user or group
 name does not exist on the destination system, then the numeric ID
 from the source system is used instead.
 
 name does not exist on the destination system, then the numeric ID
 from the source system is used instead.
 

-dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum IO
+dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum I/O

 timeout in seconds. If no data is transferred for the specified time
 then rsync will exit. The default is 0, which means no timeout.
 
 timeout in seconds. If no data is transferred for the specified time
 then rsync will exit. The default is 0, which means no timeout.
 


@@ -799,11 +799,11 @@ the default is rsyncd.conf in the current directory (typically $HOME).
 dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
 rather than the default port 873.
 
 dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
 rather than the default port 873.
 

-dit(bf(--blocking-io)) This tells rsync to use blocking IO when launching
+dit(bf(--blocking-io)) This tells rsync to use blocking I/O when launching

 a remote shell transport.  If the remote shell is either rsh or remsh,
 rsync defaults to using
 a remote shell transport.  If the remote shell is either rsh or remsh,
 rsync defaults to using

-blocking IO, otherwise it defaults to using non-blocking IO.  (Note that
-ssh prefers non-blocking IO.)
+blocking I/O, otherwise it defaults to using non-blocking I/O.  (Note that
+ssh prefers non-blocking I/O.)

 
 dit(bf(--no-blocking-io)) Turn off --blocking-io, for use when it is the
 default.
 
 dit(bf(--no-blocking-io)) Turn off --blocking-io, for use when it is the
 default.


@@ -1130,8 +1130,8 @@ was made to manipulate 64-bit files on a platform that cannot support
 them; or an option was specifed that is supported by the client and
 not by the server.
 dit(bf(5)) Error starting client-server protocol
 them; or an option was specifed that is supported by the client and
 not by the server.
 dit(bf(5)) Error starting client-server protocol

-dit(bf(10)) Error in socket IO 
-dit(bf(11)) Error in file IO 
+dit(bf(10)) Error in socket I/O 
+dit(bf(11)) Error in file I/O 

 dit(bf(12)) Error in rsync protocol data stream 
 dit(bf(13)) Errors with program diagnostics 
 dit(bf(14)) Error in IPC code 
 dit(bf(12)) Error in rsync protocol data stream 
 dit(bf(13)) Errors with program diagnostics 
 dit(bf(14)) Error in IPC code 


@@ -1190,7 +1190,7 @@ When transferring to FAT filesystems rsync may resync
 unmodified files.
 See the comments on the --modify-window option.
 
 unmodified files.
 See the comments on the --modify-window option.
 

-file permissions, devices etc are transferred as native numerical
+file permissions, devices, etc. are transferred as native numerical

 values
 
 see also the comments on the --delete option
 values
 
 see also the comments on the --delete option