-NEWS for rsync 2.6.1 (UNRELEASED)
-Protocol: 28 (changed)
-Changes since 2.6.0:
-
- ENHANCEMENTS:
-
- * Lower memory use and more optimal transfer of data over
- the socket (see the INTERNAL section for details).
-
- * The RSYNC_PROXY environment variable can now contain a
- "USER:PASS@" prefix before the "HOST:PORT" information.
- (Bardur Arantsson)
-
- * The --progress output now mentions how far along in the
- transfer we are, including both a count of files transferred
- and a percentage of the total file-count that we're processed.
- It was also improved to better show the current rate of
- transfer (which is used to estimate the remaining transfer
- time).
-
- * The configure script now accepts --with-rsyncd-conf=PATH
- to override the default value of the /etc/rsyncd.conf file.
-
- * Added a couple extra diffs in the "patches" dir, removed the
- ones that got applied, and rebuilt the rest.
+NEWS for rsync 2.6.4 (UNRELEASED)
+Protocol: 29 (changed)
+Changes since 2.6.3:
BUG FIXES:
- * When -x (--one-file-system) is combined with -L (--copy-links)
- or --copy-unsafe-links, no symlinked files are skipped, even
- if the referant file is on a different filesystem.
+ - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
+ was only treating it as a special token in an rsync include/exclude
+ file).
- * The --link-dest code now works properly for a non-root user
- when (1) the UIDs of the source and destination differ and -o
- was specified, or (2) when the group of the source can't be
- used on the destination and -g was specified.
+ - Avoid a mkdir warning when removing a directory in the destination
+ that already exists in the --backup-dir.
- * Fixed a bug in the handling of -H (hard-links) that might
- cause the expanded PATH/NAME value of the current item to
- get overwritten (due to an expanded-name caching bug).
-
- * We now reset the "new data has been sent" flag at the start
- of each file we send. This makes sure that an interrupted
- transfer with the --partial option set doesn't keep a shorter
- temp file than the current basis file when no new data has been
- transfered over the wire for that file.
+ - An OS that has a binary mode for its files (such as cygwin0 needed
+ setmode(fd, O_BINARY) called on the temp-file we opened with
+ mkstemp(). (Fix picked up from the cygwin package.)
- * Fixed a byte-order problem in --batch-mode on big-endian
- machines. (Jay Fenlason)
+ - Fixed a potential hang when verbosity is high, the client side is
+ the sender, and the file-list is large.
- * Fixed configure bug when running "./configure --disable-ipv6".
+ - We now check if the OS doesn't support using mknod() for creating
+ FIFOs and sockets, and compile-in using mkfifo() and socket() when
+ necessary.
- * Fixed "make test" bug when build dir is not the source dir.
+ - Fixed an off-by-one error in the handling of --max-delete=N.
- * When using --cvs-exclude, the exclude items we get from a
- directory's .cvsignore file once again only affect that one
- directory (and not all following directories too).
+ - One place in the code wasn't checking if fork() failed.
- * When transferring a file that has group 0 with -g specified
- (typically via -a) and not enough privs to retain the group,
- rsync no longer complains about "chown" failing.
+ - The "ignore nonreadable" daemon parameter no longer affects symlinks
+ that are being copied, even if they point nowhere.
- * When specifying the USER@HOST: prefix for a file, the USER
- part can now contain an '@', if needed (i.e. the last '@'
- is used to find the HOST, not the first).
+ - If the OS does not have lchown() and its chown() tries to set the
+ referent of a symlink (as it should), we no longer try to set the
+ user and group of a symlink.
- * Fixed some bugs in the handling of group IDs for non-root
- users: (1) It properly handles a group that the sender didn't
- have a name for (it would previously skip changing the group
- on any files in that group). (2) If --numeric-ids is used,
- rsync no longer attempts to set groups that the user doesn't
- have the permission to set.
+ - The generator now properly runs the hard-link loop and the dir-time
+ rewriting loop after we're sure that the redo phase is complete.
- * Fixed the "refuse options" setting in the rsyncd.conf file.
+ - When --backup was specified with --partial-dir=DIR, don't try to
+ backup a file in DIR when DIR is relative.
- * Improved the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter. It is both more optimal
- (in that it no longer does a useless scan of the contents of
- the mount-point dirs) and also fixes a bug where a remaped
- mount of the original filesystem could get discovered on a
- disk we should be ignoring.
-
- * Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied them).
-
- * Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
-
- INTERNAL:
+ ENHANCEMENTS:
- * Most of the I/O is now buffered, which results in a pretty
- large speedup when running under MS Windows. (Craig Barratt)
+ - Rsync now supports popt's option aliases, which means that you can
+ use /etc/popt and/or ~/.popt to create your own option aliases.
- * Optimizations to the name-handling/comparing code have made
- some significant reductions in user-CPU time for large file
- sets.
+ - Added the --copy-dest option, which works like --link-dest except
+ that it includes copies of identical files.
- * Some variable-type cleanup that makes the code more consistent.
+ - Added support for specifying multiple --compare-dest, --copy-dest, or
+ --link-dest options, but only of a single type. (Promoted from the
+ patches dir and enhanced.)
- * Reduced memory requirements of hard link preservation.
- (J.W. Schultz)
+ - Added the --max-size option. (Promoted from the patches dir.)
- * Implemented a new algorithm for hard-link handling that speeds
- up the code significantly. (J.W. Schultz and Wayne Davison)
+ - The daemon-mode options were separated from the normal rsync options
+ so that they can't be mixed together. This makes it impossible to
+ start a daemon that had improper default option values that could
+ cause problems (such as a hang or an abort) when a client connects.
- * The --hard-link option now uses the first existing file in the
- group of linked files as the basis for the transfer. This
- prevents the sub-optimal transfer of a file's data when a new
- hardlink is added on the sending side and it sorts alphabetically
- earlier in the list than the files that are already present on the
- receiving side.
+ - The --bwlimit option may now be used in combination with --daemon
+ to specify a default value for the daemon side and also a value
+ that cannot be exceeded by a user-specified --bwlimit option.
- * Dropped support for protocol versions less than 20
- (2.3.0 released 15 Mar 1999) and activated warnings for
- protocols less than 25 (2.5.0 released 23 Aug 2001)
- (Wayne Davison and J.W. Schultz, severally)
+ - Added the "port" parameter to the rsyncd.conf file. (Promoted from
+ the patches dir.)
- * More optimal data transmission for --hard-links (protocol 28).
+ - In _exit_cleanup(): when we are exiting with a partially-received
+ file, we now flush any data in the write-cache before closing the
+ partial file.
- * More optimal data transmission for --checksum (protocol 28).
+ - The --inplace support was enhanced to work with --compare-dest,
+ --link-dest, and (the new) --copy-dest options.
- * Less memory is used when --checksum is specified.
+ - Added support/atomic-rsync -- a perl script that will transfer some
+ files using rsync, and then move the updated files into place all at
+ once at the end of the transfer. Only works when pulling, and uses
+ --link-dest.
- * Less memory is used in the file list (a per-file savings).
+ INTERNAL:
- * Changed hardlink info and file_struct + strings to use
- allocation pools. This reduces memory use for large
- filesets and permits freeing memory to the OS. (J.W. Schultz)
+ - Added better checking of the checksum header values that come over
+ the socket.
- * The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe
- and the protocol improved so that (1) it is now impossible to
- have the "redo" pipe fill up and hang rsync, and (2) trailing
- messages from the receiver don't get lost on their way through
- the generator over to the sender (the latter mainly affected
- hard-link messages and verbose --stats output).
+ - Improved the type of some variables for consistency and proper size.
- * The reading & writing of the file list in batch-mode is now
- handled by the same code that sends & receives the list over
- the wire. This makes it much easier to maintain.
+ BUILD CHANGES:
- * Improved the internal uid/gid code to be more portable and
- a little more optimized.
+ - Handle an operating system that use mkdev() in place of makedev().