mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(1 Jan 2004)()()
+manpage(rsync)(1)(24 Mar 2004)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
it() for copying from a remote rsync server to the local
machine. This is invoked when the source path contains a ::
- separator or a rsync:// URL.
+ separator or an rsync:// URL.
it() for copying from the local machine to a remote rsync
server. This is invoked when the destination path contains a ::
- separator or a rsync:// URL.
+ separator or an rsync:// URL.
it() for copying from a remote machine using a remote shell
program as the transport, using rsync server on the remote
itemize(
it() you use a double colon :: instead of a single colon to
- separate the hostname from the path or a rsync:// URL.
+ separate the hostname from the path or an rsync:// URL.
it() the remote server may print a message of the day when you
connect.
--suffix=SUFFIX backup suffix (default ~ w/o --backup-dir)
-u, --update update only (don't overwrite newer files)
-l, --links copy symlinks as symlinks
- -L, --copy-links copy the referent of symlinks
- --copy-unsafe-links copy links outside the source tree
- --safe-links ignore links outside the destination tree
+ -L, --copy-links copy the referent of all symlinks
+ --copy-unsafe-links copy the referent of "unsafe" symlinks
+ --safe-links ignore "unsafe" symlinks
-H, --hard-links preserve hard links
-p, --perms preserve permissions
-o, --owner preserve owner (root only)
--files-from=FILE read FILE for list of source-file names
-0 --from0 all file lists are delimited by nulls
--version print version number
- --daemon run as a rsync daemon
+ --daemon run as an rsync daemon
--no-detach do not detach from the parent
--address=ADDRESS bind to the specified address
--config=FILE specify alternate rsyncd.conf file
specify a backup suffix using the --suffix option
(otherwise the files backed up in the specified directory
will keep their original filenames).
+If DIR is a relative path, it is relative to the destination directory
+(which changes in a recursive transfer).
dit(bf(--suffix=SUFFIX)) This option allows you to override the default
backup suffix used with the --backup (-b) option. The default suffix is a ~
symlink on the destination.
dit(bf(-L, --copy-links)) When symlinks are encountered, the file that
-they point to is copied, rather than the symlink.
+they point to (the referent) is copied, rather than the symlink.
dit(bf(--copy-unsafe-links)) This tells rsync to copy the referent of
-symbolic links that point outside the source tree. Absolute symlinks
+symbolic links that point outside the copied tree. Absolute symlinks
are also treated like ordinary files, and so are any symlinks in the
source path itself when --relative is used.
dit(bf(--safe-links)) This tells rsync to ignore any symbolic links
-which point outside the destination tree. All absolute symlinks are
+which point outside the copied tree. All absolute symlinks are
also ignored. Using this option in conjunction with --relative may
give unexpected results.
dit(bf(-o, --owner)) This option causes rsync to set the owner of the
destination file to be the same as the source file. On most systems,
-only the super-user can set file ownership. The preservation is done
-primarily by name, but falls back to using the ID number if the ID has
-no name on the sending side or has no match on the receiving side.
-See also the --numeric-ids option and the "use chroot" setting in the
-rsyncd.conf manpage.
+only the super-user can set file ownership. By default, the preservation
+is done by name, but may fall back to using the ID number in some
+circumstances. See the --numeric-ids option for a full discussion.
dit(bf(-g, --group)) This option causes rsync to set the group of the
destination file to be the same as the source file. If the receiving
program is not running as the super-user, only groups that the
-receiver is a member of will be preserved. The preservation is done
-primarily by name, but falls back to using the ID number if the ID has
-no name on the sending side or has no match on the receiving side.
-See also the --numeric-ids option and the "use chroot" setting in the
-rsyncd.conf manpage.
+receiver is a member of will be preserved. By default, the preservation
+is done by name, but may fall back to using the ID number in some
+circumstances. See the --numeric-ids option for a full discussion.
dit(bf(-D, --devices)) This option causes rsync to transfer character and
block device information to the remote system to recreate these
You may use as many --exclude options on the command line as you like
to build up the list of files to exclude.
-See the EXCLUDE PATTERNS section for information on the syntax of
-this option.
+See the EXCLUDE PATTERNS section for detailed information on this option.
dit(bf(--exclude-from=FILE)) This option is similar to the --exclude
option, but instead it adds all exclude patterns listed in the file
specified pattern of filenames. This is useful as it allows you to
build up quite complex exclude/include rules.
-See the EXCLUDE PATTERNS section for information on the syntax of
-this option.
+See the EXCLUDE PATTERNS section for detailed information on this option.
dit(bf(--include-from=FILE)) This specifies a list of include patterns
from a file.
This option increases the usefulness of --partial because partially
transferred files will remain in the new temporary destination until they
have a chance to be completed. If DIR is a relative path, it is relative
-to the destination directory.
+to the destination directory (which changes in a recursive transfer).
dit(bf(--link-dest=DIR)) This option behaves like bf(--compare-dest) but
also will create hard links from em(DIR) to the destination directory for
unchanged files. Files with changed ownership or permissions will not be
linked.
Like bf(--compare-dest) if DIR is a relative path, it is relative
-to the destination directory.
+to the destination directory (which changes in a recursive transfer).
dit(bf(-z, --compress)) With this option, rsync compresses any data from
the files that it sends to the destination machine. This
If a user or group has no name on the source system or it has no match
on the destination system, then the numeric ID
from the source system is used instead. See also the comments on the
-"use chroot" setting in the rsyncd.conf manpage.
+"use chroot" setting in the rsyncd.conf manpage for information on how
+the chroot setting affects rsync's ability to look up the names of the
+users and groups and what you can do about it.
dit(bf(--timeout=TIMEOUT)) This option allows you to set a maximum I/O
timeout in seconds. If no data is transferred for the specified time
dit(bf(--password-file)) This option allows you to provide a password
in a file for accessing a remote rsync server. Note that this option
-is only useful when accessing a rsync server using the built in
+is only useful when accessing an rsync server using the built in
transport, not when using a remote shell as the transport. The file
must not be world readable. It should contain just the password as a
single line.
The exclude and include patterns specified to rsync allow for flexible
selection of which files to transfer and which files to skip.
-rsync builds an ordered list of include/exclude options as specified on
+Rsync builds an ordered list of include/exclude options as specified on
the command line. Rsync checks each file and directory
name against each exclude/include pattern in turn. The first matching
pattern is acted on. If it is an exclude pattern, then that file is
skipped. If no matching include/exclude pattern is found then the
filename is not skipped.
-The filenames matched against the exclude/include patterns
-are relative to the destination directory, or "top
-directory", so patterns should not include the path elements
-of the source or destination directories. The only way in
-which a pattern will match the absolute path of a file or
-directory is if the source path is the root directory.
+The filenames matched against the exclude/include patterns are relative
+to the "root of the transfer". If you think of the transfer as a
+subtree of names that are being sent from sender to receiver, the root
+is where the tree starts to be duplicated in the destination directory.
+This root governs where patterns that start with a / match (see below).
-Note that when used with -r (which is implied by -a), every subcomponent of
-every path is visited from top down, so include/exclude patterns get
+Because the matching is relative to the transfer-root, changing the
+trailing slash on the source path or changing your use of the --relative
+option affects the path you need to use in your matching (in addition to
+changing how much of the file tree is duplicated on the destination
+system). The following examples demonstrate this.
+
+Let's say that we want to match two source files, one with an absolute
+path of "/home/me/foo/bar", and one with a path of "/home/you/bar/baz".
+Here is how the various command choices differ for a 2-source transfer:
+
+verb(
+ Example cmd: rsync -a /home/me /home/you /dest
+ Source root: /home (me & you are part of transfer)
+ +/- pattern: /me/foo/bar
+ +/- pattern: /you/bar/baz
+ Target file: /dest/me/foo/bar
+ Target file: /dest/you/bar/baz
+
+ Example cmd: rsync -a /home/me/ /home/you/ /dest
+ Source root: /home/me (due to trailing /)
+ Source root: /home/you (ditto)
+ +/- pattern: /foo/bar (note missing "me")
+ +/- pattern: /bar/baz (note missing "you")
+ Target file: /dest/foo/bar
+ Target file: /dest/bar/baz
+
+ Example cmd: rsync -a --relative /home/me/ /home/you /dest
+ Source root: /
+ +/- pattern: /home/me/foo/bar (note full path)
+ +/- pattern: /home/you/bar/baz (ditto)
+ Target file: /dest/home/me/foo/bar
+ Target file: /dest/home/you/bar/baz
+
+ Example cmd: cd /home; rsync -a --relative me/foo you/ /dest
+ Source root: /home
+ +/- pattern: /me/foo/bar (starts at specified path)
+ +/- pattern: /you/bar/baz (ditto)
+ Target file: /dest/me/foo/bar
+ Target file: /dest/you/bar/baz
+)
+
+The easiest way to see what name you should include/exclude is to just
+look at the output when using --verbose and put a / in front of the name
+(use the --dry-run option if you're not yet ready to copy any files).
+
+Note that, when using the --recursive (-r) option (which is implied by -a),
+every subcomponent of
+every path is visited from the top down, so include/exclude patterns get
applied recursively to each subcomponent.
Note also that the --include and --exclude options take one pattern
start of the filename, otherwise it is matched against the end of
the filename.
This is the equivalent of a leading ^ in regular expressions.
- Thus "/foo" would match a file called "foo" at the top of the
- transferred tree.
+ Thus "/foo" would match a file called "foo" at the transfer-root
+ (see above for how this is different from the filesystem-root).
On the other hand, "foo" would match any file called "foo"
anywhere in the tree because the algorithm is applied recursively from
top down; it behaves as if each path component gets a turn at being the
end of the file name.
- The leading / does not make the pattern an absolute pathname.
it() if the pattern ends with a / then it will only match a
- directory, not a file, link or device.
+ directory, not a file, link, or device.
it() if the pattern contains a wildcard character from the set
*?[ then expression matching is applied using the shell filename
itemize(
it() --exclude "*.o" would exclude all filenames matching *.o
- it() --exclude "/foo" would exclude a file called foo in the top directory
+ it() --exclude "/foo" would exclude a file called foo in the transfer-root directory
it() --exclude "foo/" would exclude any directory called foo
it() --exclude "/foo/*/bar" would exclude any file called bar two
- levels below a directory called foo in the top directory
+ levels below a directory called foo in the transfer-root directory
it() --exclude "/foo/**/bar" would exclude any file called bar two
- or more levels below a directory called foo in the top directory
+ or more levels below a directory called foo in the transfer-root directory
it() --include "*/" --include "*.c" --exclude "*" would include all
directories and C source files
it() --include "foo/" --include "foo/bar.c" --exclude "*" would include
Example:
verb(
-$ rsync --write-batch=pfx -a /source/dir/ /adest/dir/
-$ rcp pfx.rsync_* remote:
-$ ssh remote rsync --read-batch=pfx -a /bdest/dir/
-# or alternatively
-$ ssh remote ./pfx.rsync_argvs /bdest/dir/
+ $ rsync --write-batch=pfx -a /source/dir/ /adest/dir/
+ $ rcp pfx.rsync_* remote:
+ $ ssh remote rsync --read-batch=pfx -a /bdest/dir/
+ # or alternatively
+ $ ssh remote ./pfx.rsync_argvs /bdest/dir/
)
In this example, rsync is used to update /adest/dir/ with /source/dir/
rsync daemon. You should set RSYNC_PROXY to a hostname:port pair.
dit(bf(RSYNC_PASSWORD)) Setting RSYNC_PASSWORD to the required
-password allows you to run authenticated rsync connections to a rsync
+password allows you to run authenticated rsync connections to an rsync
daemon without user intervention. Note that this does not supply a
password to a shell transport such as ssh.
dit(bf(USER) or bf(LOGNAME)) The USER or LOGNAME environment variables
-are used to determine the default username sent to a rsync server.
+are used to determine the default username sent to an rsync server.
+If neither is set, the username defaults to "nobody".
dit(bf(HOME)) The HOME environment variable is used to find the user's
default .cvsignore file.
and David Bell for helpful suggestions, patches and testing of rsync.
I've probably missed some people, my apologies if I have.
-Especial thanks also to: David Dykstra, Jos Backus, Sebastian Krahmer.
-
+Especial thanks also to: David Dykstra, Jos Backus, Sebastian Krahmer,
+Martin Pool, Wayne Davison.
manpageauthor()
-rsync was written by Andrew Tridgell <tridge@samba.org> and Paul
-Mackerras.
-
-rsync is now maintained by Martin Pool <mbp@samba.org>.
+rsync was originally written by Andrew Tridgell and Paul Mackerras.
+Many people have later contributed to it.
Mailing lists for support and development are available at
url(http://lists.samba.org)(lists.samba.org)
-
-If you suspect you have found a security vulnerability in rsync,
-please send it directly to Martin Pool and Andrew Tridgell. For other
-enquiries, please use the mailing list.