- - Rsync now supports popt's option aliases, which means that you can
- use /etc/popt and/or ~/.popt to create your own option aliases.
-
- - Added the --delete-during (--del) option which will delete files
- from on the receiving side incrementally as each directory in the
- transfer is being processed. This makes it more efficient than the
- default, before-the-transfer behavior, which is now available as
- --delete-before (that is still the default --delete-WHEN option that
- will be chosen if --delete or --delete-excluded is specified without
- a --delete-WHEN choice). All the --del* options infer --delete, so
- an rsync daemon that refuses "delete" will still refuse to allow any
- file-deleting options.
-
- - All the --delete-WHEN options are now more memory efficient:
- Previously an entire duplicate set of file-list objects was created
- on the receiving side for the entire destination hierarchy. The new
- algorithm only creates one directory of objects at a time.
-
- - Added support for specifying multiple --compare-dest or --link-dest
- options, but only of a single type. (Promoted from the patches dir
- and enhanced.)
-
- - Added the --max-size option. (Promoted from the patches dir.)
-
- - The daemon-mode options were separated from the normal rsync options
- so that they can't be mixed together. This makes it impossible to
- start a daemon that had improper default option values that could
- cause problems when a client connects (e.g. a hang or an abort).
-
- - The --bwlimit option may now be used in combination with --daemon
- to specify both a default value for the daemon side and a value
- that cannot be exceeded by a user-specified --bwlimit option.
-
- - Added the "port" parameter to the rsyncd.conf file. (Promoted from
- the patches dir.) Also added "address". A command-line option
- will take precedence over a config-file option, as expected.
-
- - In _exit_cleanup(): when we are exiting with a partially-received
- file, we now flush any data in the write-cache before closing the
- partial file.
-
- - The --inplace support was enhanced to work with --compare-dest and
- --link-dest. (Requires protocol 29.)
-
- - Added the --dirs (-d) option for an easier way to copy directories
- without recursion.
-
- - Added the --list-only option which is mainly a way for the client to
- put the server into listing mode without needing to resort to any
- internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
- for a non-recursive listing). This option is used automatically
- (behind the scenes) when a modern rsync speaks to a modern daemon,
- but may also be specified manually if you want to force the use of
- the --list-only option over a remote-shell connection.
-
- - Added the --omit-dir-times (-O) option, which will avoid updating
- the modified time for directories when --times was specified. This
- option will avoid an extra pass through the file-list at the end of
- the transfer (to tweak all the directory times), which can result in
- an appreciable speedup for a really large transfer. (Promoted from
- the patches dir.)
-
- - Added the --filter (-f) option and its helper option, -F. Filter
- rules are an extension to the existing include/exclude handling
- that also supports nested filter files as well as per-directory
- filter files (like .cvsignore, but with full filter-rule parsing).
- This new option was chosen in order to ensure that all existing
- include/exclude processing remained 100% compatible with older
- versions. Protocol 29 is needed for full filter-rule support, but
- backward-compatible rules work with earlier protocol versions.
- (Promoted from the patches dir and enhanced.)
-
- - Added the --delay-updates option that puts all updated files into
- a temporary directory (by default ".~tmp~", but settable via the
- --partial-dir=DIR option) until the end of the transfer. This
- makes the updates a little more atomic for a large transfer.
-
- - If rsync is put into the background, any output from --progress is
- reduced.
-
- - Documented the "max verbosity" setting for rsyncd.conf. (This
- setting was added a couple releases ago, but left undocumented.)
-
- - The sender and the generator now double-check the file-list index
- they are given, and refuse to try to do a file transfer on a
- non-file index (since that would indicate that something had gone
- very wrong).
-
- - Added the --itemize-changes (-i) option, which is a way to output a
- more detailed list of what files changed in any way and how they
- changed. The effect is the same as specifying a --log-format of
- "%i %n%L" (see the rsyncd.conf manpage). Works with --dry-run too.
-
- - Added the --fuzzy option, which attempts to find a basis file for a
- file that is being created from scratch. The current algorithm
- only looks in the destination directory for the created file, but
- it does attempt to find a match based on size/mod-time (in case the
- file was renamed with no other changes) as well as based on a fuzzy
- name-matching algorithm. This option requires protocol 29 because
- it needs the new file-sorting order. (Promoted from patches dir
- and enhanced.)
-
- - Added the --remove-sent-files option, which lets you move files
- between systems.
-
- - When building under windows, the default for --daemon is now to
- avoid detaching, requiring the new --detach option to force rsync
- to detach.
-
- - Improved the option descriptions in the --help text.
-
- SUPPORT FILES:
-
- - Added atomic-rsync to the support dir: a perl script that will
- transfer some files using rsync, and then move the updated files into
- place all at once at the end of the transfer. Only works when
- pulling, and uses --link-dest and a parallel hierarchy of files to
- effect its update.
-
- - Added mnt-excl to the support dir: a perl script that takes the
- /proc/mounts file and translates it into a set of excludes that will
- exclude all mount points (even mapped mounts to the same disk). The
- excludes are made relative to the specified source dir and properly
- anchored.
-
- - Added savetransfer.c to the support dir: a C program that can make
- a copy of all the data that flows over the wire. This lets you test
- for data corruption (by saving the data on both the sending side and
- the receiving side) or provides a way to help debug a protocol error.
-
- - Added rrsync to the support dir: this is my version of Joe Smith's
- restricted rsync perl script. This helps to ensure that only certain
- rsync commands can be run by an ssh invocation.
-
- INTERNAL:
-
- - Added better checking of the checksum-header values that come over
- the socket.
-
- - Merged a variety of file-deleting functions into a single function so
- that it is easier to maintain.
-
- - Improved the type of some variables (particularly blocksize vars) for
- consistency and proper size.
-
- - Got rid of the uint64 type (which we didn't need).
-
- - Use a slightly more compatible set of core #include directives.
-
- - Defined int32 in a way that ensures that the build dies if we can't
- find a variable with at least 32 bits.
-
- - The daemon's "read only" config item now sets an internal read_only
- variable that makes extra sure that no write/delete calls on the
- read-only side can succeed.
-
- PROTOCOL DIFFERENCES FOR VERSION 29:
-
- - A 16-bit flag-word is transmitted after every file-list index. This
- indicates what is changing between the sender and the receiver. The
- generator now transmits an index and a flag-word to indicate when
- dirs and symlinks have changed, which makes the outputting of the
- information more consistent and less prone to screen corruption (it
- resorts to the old-style outputting of generator-created change-
- messages for older protocol versions).
-
- - If --inplace is specified, the generator flags any transfer that is
- using an alternate basis file so that the sender can use the entire
- file in the rsync algorithm (unlike a normal --inplace update).
-
- - The sending of exclude names is done using filter-rule syntax. This
- means that all names have a prefixed rule indicator, even excludes
- (which used to be sent as a bare pattern, when possible). The -C
- option will include the per-dir .cvsignore merge file in the list of
- filter rules so it is positioned correctly (unlike in some older
- transfer scenarios).
-
- - Rsync sorts the filename list in a different way: it sorts the subdir
- names after the non-subdir names for each dir's contents, and it
- always puts a dir's contents immediately after the dir's name in the
- list. (Previously an item named "foo.txt" would sort in between
- directory "foo/" and "foo/bar".)
-
- - When talking to a protocol 29 rsync daemon, a list-only request
- is able to note this before the options are sent over the wire and
- the new --list-only option is included in the options.