-NEWS for rsync 2.6.4 (UNRELEASED)
-Protocol: 29 (changed)
-Changes since 2.6.3:
+NEWS for rsync 2.6.8 (UNRELEASED)
+Protocol: 29 (unchanged)
+Changes since 2.6.7:
- OUTPUT CHANGES:
-
- - When rsync deletes a directory and outputs a verbose message about
- it, it now appends a trailing slash to the name instead of (only
- sometimes) outputting a preceding "directory " string.
-
- - The --stats output will contain file-list time statistics if both
- sides are 2.6.4, or if the local side is 2.6.4 and the files are
- being pushed (since the stats come from the sending side).
-
BUG FIXES:
- - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
- was only treating it as a special token in an rsync include/exclude
- file).
-
- - The --dry-run option (-n) now mentions changes in directories (w/-v).
- It also now includes the normal uptodate output information for -vv.
-
- - Avoid a mkdir warning when removing a directory in the destination
- that already exists in the --backup-dir.
-
- - An OS that has a binary mode for its files (such as cygwin0 needed
- setmode(fd, O_BINARY) called on the temp-file we opened with
- mkstemp(). (Fix derived from the cygwin's rsync package.)
-
- - Fixed a potential hang when verbosity is high, the client side is
- the sender, and the file-list is large.
-
- - We now check if the OS doesn't support using mknod() for creating
- FIFOs and sockets, and compile-in using mkfifo() and socket() when
- necessary.
-
- - Fixed an off-by-one error in the handling of --max-delete=N.
+ - Fixed a bug in the exclude code where an anchored exclude without any
+ wildcards fails to match an absolute source arg, but only when --relative
+ is in effect.
- - One place in the code wasn't checking if fork() failed.
+ - Improved the I/O code for the generator to fix a potential hang when the
+ receiver gets an EOF on the socket but the generator's select() call
+ never indicates that the socket is writable for it to be notified about
+ the EOF. (This can happen when using stunnel).
- - The "ignore nonreadable" daemon parameter no longer affects symlinks
- that are being copied, even if they point nowhere.
+ - Fixed a problem with the file-reading code where a failed read (such as
+ that caused by a bad sector) would not advance the file's read-position
+ beyond the failed read's data.
- - If the OS does not have lchown() and its chown() tries to set the
- referent of a symlink (as it should), we no longer try to set the
- user and group of a symlink.
+ - Fixed a logging bug where the "log file" directive was not being honored
+ in a single-use daemon (one spawned by a remote-shell connection or by
+ init).
- - The generator now properly runs the hard-link loop and the dir-time
- rewriting loop after we're sure that the redo phase is complete.
+ - If rsync cannot honor the --delete option, we output an error and exit
+ instead of silently ignoring the option.
- - When --backup was specified with --partial-dir=DIR (where DIR is a
- relative path), the backup code was erroneously trying to backup a
- file that was put into the partial-dir.
+ - Fixed a bug in the --link-dest code that prevented special files (such as
+ fifos) from being linked.
- - One call to flush_write_file() was not being checked for an error.
-
- - The --no-relative option was not being sent from the client to a
- server sender.
-
- - If an rsync daemon specified "dont compress = ..." for a file and the
- client tried to specify --compress, the libz code was not handling a
- compression level of 0 properly. This could cause a transfer failure
- if the block-size for a file was large enough (i.e. rsync might have
- exited with an error for large files).
+ - The ability to hard-link symlinks and special files is now determined at
+ configure time instead of at runtime. This fixes a bug with --link-dest
+ creating a hard-link to a symlink's referent on a BSD system.
ENHANCEMENTS:
- - Rsync now supports popt's option aliases, which means that you can
- use /etc/popt and/or ~/.popt to create your own option aliases.
-
- - Added the --delete-during (--del) option which will delete files
- from on the receiving side incrementally as each directory in the
- transfer is being processed (which makes it more efficient than the
- default, before-the-transfer behavior of --delete). Note that the
- --del option is implemented as an internally-defined popt alias, so
- an rsync daemon that refuses "delete" (which, for safety's sake,
- really matches "delete*") will still refuse all delete options.
-
- - Added the --copy-dest option, which works like --link-dest except
- that it includes copies of identical files.
-
- - Added support for specifying multiple --compare-dest, --copy-dest, or
- --link-dest options, but only of a single type. (Promoted from the
- patches dir and enhanced.)
-
- - Added the --max-size option. (Promoted from the patches dir.)
-
- - The daemon-mode options were separated from the normal rsync options
- so that they can't be mixed together. This makes it impossible to
- start a daemon that had improper default option values that could
- cause problems (such as a hang or an abort) when a client connects.
-
- - The --bwlimit option may now be used in combination with --daemon
- to specify both a default value for the daemon side and a value
- that cannot be exceeded by a user-specified --bwlimit option.
-
- - Added the "port" parameter to the rsyncd.conf file. (Promoted from
- the patches dir.) Also added "address".
-
- - In _exit_cleanup(): when we are exiting with a partially-received
- file, we now flush any data in the write-cache before closing the
- partial file.
-
- - The --inplace support was enhanced to work with --compare-dest,
- --link-dest, and (the new) --copy-dest options.
-
- - Added the --dirs (-d) option for an easier way to copy directories
- without recursion.
-
- - Added the --list-only option which is mainly a way for the client to
- put the server into listing mode without needing to resort to any
- option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a
- non-recursive listing). This option is used automatically when a
- modern rsync speaks to a modern daemon, but may also be specified
- manually if you want to force the use of the --list-only option over
- a remote-shell connection.
-
- - Added the --omit-dir-times (-O) option which will avoid updating the
- modified time for directories when --times was specified. This
- option will avoid an extra pass through the file-list at the end of
- the transfer (to tweak all the directory times), which can result in
- an appreciable speedup for a really large transfer.
-
- - Added the --filter (-f) option and its helper option, -F. Filter
- rules are an extension to the existing include/exclude handling
- that also supports nested filter files as well as per-directory
- filter files (like .cvsignore, but with full filter-rule parsing).
- This new option was chosen in order to ensure that all existing
- include/exclude processing remained 100% compatible with older
- versions.
-
- - Added the --delay-updates option that puts all updated files into
- a temporary directory (by default ".~tmp~", but settable via the
- --partial-dir=DIR option) until the end of the transfer. This
- makes the updates a little more atomic for a large transfer.
-
- - If rsync is put into the background, any output from --progress is
- reduced.
-
- SUPPORT FILES:
-
- - Added support/atomic-rsync -- a perl script that will transfer some
- files using rsync, and then move the updated files into place all at
- once at the end of the transfer. Only works when pulling, and uses
- --link-dest and a parallel hierarchy of files to effect its update.
-
- - Added support/mnt-excl that takes the /proc/mounts file and
- translates it into a set of excludes that will exclude all mount
- points (even mapped mounts to the same disk). The excludes are made
- relative to the specified source dir and properly anchored.
-
- - Added support/savetransfer.c -- a C program that can make a copy of
- all the data that flows over the wire. This lets you test for data
- corruption (by saving the data on both the sending side and the
- receiving side) or provides a way to help debug a protocol error.
-
- - Added support/rrsync -- my version of Joe Smith's restricted rsync
- perl script. This helps to ensure that only certain rsync commands
- can be run by an ssh invocation.
-
- INTERNAL:
+ - In daemon mode, if rsync fails to bind to the requested port, the
+ error(s) returned by socket() and/or bind() are now logged.
- - Added better checking of the checksum-header values that come over
- the socket.
+ - When we output a fatal error, we now output the version of rsync in the
+ message.
- - Merged the various delete-file functions into a single function so
- that it is easier to maintain.
+ - The rsyncstats script in "support" has an improved line-parsing regex
+ that is easier to read and also makes it to parse syslog-generated lines.
- - Improved the type of some variables (particularly blocksize vars) for
- consistency and proper size.
+ - A new script in "support": file-attr-restore, can be used to restore the
+ attributes of a file-set (the permissions, ownership, and group info)
+ taken from the cached output of a "find ARG... -ls" command.
- - Got rid of the uint64 type (which we didn't need).
+ DEVELOPER RELATED:
- BUILD CHANGES:
+ - Removd two unused configure checks and two related (also unused)
+ compatibility functions.
- - Handle an operating system that use mkdev() in place of makedev().
+ - The acls.diff patch has been improved quite a bit, with more to come.
- - Improved configure to better handle cross-compiling.
+ - A new patch was added: log-file.diff. This contains an early version of
+ a future option, --log-file=FILE, that will allow any rsync to log its
+ actions to a file (something that only a daemon supports at present).
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff