- * When -x (--one-file-system) is combined with -L (--copy-links)
- or --copy-unsafe-links, no symlinked files are skipped, even
- if the referent file is on a different filesystem.
-
- * The --link-dest code now works properly for a non-root user
- when (1) the UIDs of the source and destination differ and -o
- was specified, or (2) when the group of the source can't be
- used on the destination and -g was specified.
-
- * Fixed a bug in the handling of -H (hard-links) that might
- cause the expanded PATH/NAME value of the current item to
- get overwritten (due to an expanded-name caching bug).
-
- * We now reset the "new data has been sent" flag at the start
- of each file we send. This makes sure that an interrupted
- transfer with the --partial option set doesn't keep a shorter
- temp file than the current basis file when no new data has been
- transfered over the wire for that file.
-
- * Fixed a byte-order problem in --batch-mode on big-endian
- machines. (Jay Fenlason)
-
- * Fixed configure bug when running "./configure --disable-ipv6".
-
- * Fixed "make test" bug when build dir is not the source dir.
-
- * When using --cvs-exclude, the exclude items we get from a
- directory's .cvsignore file once again only affect that one
- directory (and not all following directories too). The
- items are also now properly word-split and parsed without
- any +/- prefix munging.
-
- * When specifying the USER@HOST: prefix for a file, the USER
- part can now contain an '@', if needed (i.e. the last '@'
- is used to find the HOST, not the first).
-
- * Fixed some bugs in the handling of group IDs for non-root
- users: (1) It properly handles a group that the sender didn't
- have a name for (it would previously skip changing the group
- on any files in that group). (2) If --numeric-ids is used,
- rsync no longer attempts to set groups that the user doesn't
- have the permission to set.
-
- * Fixed the "refuse options" setting in the rsyncd.conf file.
-
- * Improved the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter. It is both more optimal
- (in that it no longer does a useless scan of the contents of
- the mount-point dirs) and also fixes a bug where a remapped
- mount of the original filesystem could get discovered in a
- subdir we should be ignoring.
-
- * Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied them).
-
- * Path-specifying options to a daemon should now work the same with
- or without chroot turned on. Previously, such a option (such as
- --link-dest) would get its absolute path munged into a relative
- one if chroot was not on, making that setting fairly useless.
- Rsync now transforms the path into one that is based on the
- module's base dir when chroot is not enabled.
-
- * Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
-
- * Fixed a compatibility problem interacting with older rsync
- versions that might send us an empty --suffix value without
- telling us that --backup-dir was specified.
-
- * The "hosts allow" option for a daemon-over-remote-shell
- process now has improved support for IPv6 addresses and a fix
- for systems that have a length field in their socket structs.
-
- * Fixed the ability to request an empty backup --suffix when
- sending files to an rsync daemon.
+ - Fixed a bug that would sometimes surface when using --compress and
+ sending a file with a block-size larger than 64K (either manually
+ specified, or computed due to the file being really large). Prior
+ versions of rsync would sometimes fail to decompress the data
+ properly, and thus the transferred file would fail its verification.
+
+ - If a daemon can't open the specified log file (i.e. syslog is not
+ being used), die without crashing. We also output an error about
+ the failure on stderr (which will only be seen if --no-detach was
+ specified).
+
+ - A local transfer no longer duplicates all its include/exclude options
+ (since the forked process already has a copy of the exclude list,
+ there's no need to send them a set of duplicates).
+
+ - When --progress is specified, the output of items that the generator
+ is creating (e.g. dirs, symlinks) is now integrated into the progress
+ output without overlapping it. (Requires protocol 29.)
+
+ - When --timeout is specified, lulls that occur in the transfer while
+ the generator is doing work that does not generate socket traffic
+ (looking for changed files, deleting files, doing directory-time
+ touch-ups, etc.) will cause a new keep-alive packet to be sent that
+ should keep the transfer going as long as the generator continues to
+ make progress. (Requires protocol 29.)
+
+ - The stat size of a device is not added to the total file size of the
+ items in the transfer since the size might be undefined on some OSes.
+
+ - Fixed a problem with refused-option messages sometimes not making it
+ back to the client side when a remote --files-from was in effect and
+ the daemon was the receiver.
+
+ ENHANCEMENTS:
+
+ - Rsync now supports popt's option aliases, which means that you can
+ use /etc/popt and/or ~/.popt to create your own option aliases.
+
+ - Added the --delete-during (--del) option which will delete files
+ from the receiving side incrementally as each directory in the
+ transfer is being processed. This makes it more efficient than the
+ default, before-the-transfer behavior, which is now available as
+ --delete-before (and is still the default --delete-WHEN option that
+ will be chosen if --delete or --delete-excluded is specified without
+ a --delete-WHEN choice). All the --del* options infer --delete, so
+ an rsync daemon that refuses "delete" will still refuse to allow any
+ file-deleting options.
+
+ - All the --delete-WHEN options are now more memory efficient:
+ Previously an entire duplicate set of file-list objects was created
+ on the receiving side for the entire destination hierarchy. The new
+ algorithm only creates one directory of objects at a time (for files
+ inside the transfer).
+
+ - Added support for specifying multiple --compare-dest or --link-dest
+ options, but only of a single type. (Promoted from the patches dir
+ and enhanced.)
+
+ - Added the --max-size option. (Promoted from the patches dir.)
+
+ - The daemon-mode options were separated from the normal rsync options
+ so that they can't be mixed together. This makes it impossible to
+ start a daemon that had improper default option values that could
+ cause problems when a client connects (e.g. a hang or an abort).
+
+ - The --bwlimit option may now be used in combination with --daemon
+ to specify both a default value for the daemon side and a value
+ that cannot be exceeded by a user-specified --bwlimit option.
+
+ - Added the "port" parameter to the rsyncd.conf file. (Promoted from
+ the patches dir.) Also added "address". A command-line option
+ will take precedence over a config-file option, as expected.
+
+ - In _exit_cleanup(): when we are exiting with a partially-received
+ file, we now flush any data in the write-cache before closing the
+ partial file.
+
+ - The --inplace support was enhanced to work with --compare-dest and
+ --link-dest. (Requires protocol 29.)
+
+ - Added the --dirs (-d) option for an easier way to copy directories
+ without recursion.
+
+ - Added the --list-only option, which is mainly a way for the client to
+ put the server into listing mode without needing to resort to any
+ internal option kluges (e.g. the age-old use of "-r --exclude="/*/*"
+ for a non-recursive listing). This option is used automatically
+ (behind the scenes) when a modern rsync speaks to a modern daemon,
+ but may also be specified manually if you want to force the use of
+ the --list-only option over a remote-shell connection.
+
+ - Added the --omit-dir-times (-O) option, which will avoid updating
+ the modified time for directories when --times was specified. This
+ option will avoid an extra pass through the file-list at the end of
+ the transfer (to tweak all the directory times), which can result in
+ an appreciable speedup for a really large transfer. (Promoted from
+ the patches dir.)
+
+ - Added the --filter (-f) option and its helper option, -F. Filter
+ rules are an extension to the existing include/exclude handling
+ that also supports nested filter files as well as per-directory
+ filter files (like .cvsignore, but with full filter-rule parsing).
+ This new option was chosen in order to ensure that all existing
+ include/exclude processing remained 100% compatible with older
+ versions. Protocol 29 is needed for full filter-rule support, but
+ backward-compatible rules work with earlier protocol versions.
+ (Promoted from the patches dir and enhanced.)
+
+ - Added the --delay-updates option that puts all updated files into
+ a temporary directory (by default ".~tmp~", but settable via the
+ --partial-dir=DIR option) until the end of the transfer. This
+ makes the updates a little more atomic for a large transfer.
+
+ - If rsync is put into the background, any output from --progress is
+ reduced.
+
+ - Documented the "max verbosity" setting for rsyncd.conf. (This
+ setting was added a couple releases ago, but left undocumented.)
+
+ - The sender and the generator now double-check the file-list index
+ they are given, and refuse to try to do a file transfer on a
+ non-file index (since that would indicate that something had gone
+ very wrong).
+
+ - Added the --itemize-changes (-i) option, which is a way to output a
+ more detailed list of what files changed in any way and how they
+ changed. The effect is the same as specifying a --log-format of
+ "%i %n%L" (see the rsyncd.conf manpage). Works with --dry-run too.
+
+ - Added the --fuzzy option, which attempts to find a basis file for a
+ file that is being created from scratch. The current algorithm
+ only looks in the destination directory for the created file, but
+ it does attempt to find a match based on size/mod-time (in case the
+ file was renamed with no other changes) as well as based on a fuzzy
+ name-matching algorithm. This option requires protocol 29 because
+ it needs the new file-sorting order. (Promoted from patches dir
+ and enhanced.)
+
+ - Added the --remove-sent-files option, which lets you move files
+ between systems.
+
+ - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal
+ enclosed in '[' and ']' (e.g. "[::1]"). (We already allowed IPv6
+ literals in the rsync://HOST:PORT/PATH format.)
+
+ - When building under windows, the default for --daemon is now to
+ avoid detaching, requiring the new --detach option to force rsync
+ to detach.
+
+ - Improved the option descriptions in the --help text.
+
+ SUPPORT FILES:
+
+ - Added atomic-rsync to the support dir: a perl script that will
+ transfer some files using rsync, and then move the updated files into
+ place all at once at the end of the transfer. Only works when
+ pulling, and uses --link-dest and a parallel hierarchy of files to
+ effect its update.
+
+ - Added mnt-excl to the support dir: a perl script that takes the
+ /proc/mounts file and translates it into a set of excludes that will
+ exclude all mount points (even mapped mounts to the same disk). The
+ excludes are made relative to the specified source dir and properly
+ anchored.
+
+ - Added savetransfer.c to the support dir: a C program that can make
+ a copy of all the data that flows over the wire. This lets you test
+ for data corruption (by saving the data on both the sending side and
+ the receiving side) or provides a way to help debug a protocol error.
+
+ - Added rrsync to the support dir: this is my version of Joe Smith's
+ restricted rsync perl script. This helps to ensure that only certain
+ rsync commands can be run by an ssh invocation.