Don't set the umask to 0 any more: it's ugly and pointless.
[rsync/rsync.git] / OLDNEWS
diff --git a/OLDNEWS b/OLDNEWS
index af1e59e..335511c 100644 (file)
--- a/OLDNEWS
+++ b/OLDNEWS
@@ -1,3 +1,347 @@
+NEWS for rsync 3.0.7 (31 Dec 2009)
+Protocol: 30 (unchanged)
+Changes since 3.0.6:
+
+  BUG FIXES:
+
+    - Fixed a bogus free when using --xattrs with --backup.
+
+    - Avoid an error when --dry-run  was trying to stat a prior hard-link file
+      that hasn't really been created.
+
+    - Fixed a problem with --compress (-z) where the receiving side could
+      return the error "inflate (token) returned -5".
+
+    - Fixed a bug where --delete-during could delete in a directory before it
+      noticed that the sending side sent an I/O error for that directory (both
+      sides of the transfer must be at least 3.0.7).
+
+    - Improved --skip-compress's error handling of bad character-sets and got
+      rid of a lingering debug fprintf().
+
+    - Fixed the daemon's conveyance of io_error value from the sender.
+
+    - An rsync daemon use seteuid() (when available) if it used setuid().
+
+    - Get the permissions right on a --fake-super transferred directory that
+      needs more owner permissions to emulate root behavior.
+
+    - An absolute-path filter rule (i.e. with a '/' modifier) no longer loses
+      its modifier when sending the filter rules to the remote rsync.
+
+    - Improved the "--delete does not work without -r or -d" message.
+
+    - Improved rsync's handling of --timeout to avoid a weird timeout case
+      where the sender could timeout even though it has recently written data
+      to the socket (but hasn't read data recently, due to the writing).
+
+    - Some misc manpage improvements.
+
+    - Fixed the chmod-temp-dir testsuite on a system without /var/tmp.
+
+    - Make sure that a timeout specified in the daemon's config is used as a
+      maximum timeout value when the user also specifies a timeout.
+
+    - Improved the error-exit reporting when rsync gets an error trying to
+      cleanup after an error:  the initial error is reported.
+
+    - Improved configure's detection of IPv6 for solaris and cygwin.
+
+    - The AIX sysacls routines will now return ENOSYS if ENOTSUP is missing.
+
+    - Made our (only used if missing) getaddrinfo() routine use inet_pton()
+      (which we also provide) instead of inet_aton().
+
+    - The exit-related debug messages now mention the program's role so it is
+      clear who output what message.
+
+  DEVELOPER RELATED:
+
+    - Got rid of type-punned compiler warnings output by newer gcc versions.
+
+    - The Makefile now ensures that proto.h will be rebuilt if config.h changes.
+
+    - The testsuite no longer uses "id -u", so it works better on solaris.
+
+\f
+NEWS for rsync 3.0.6 (8 May 2009)
+Protocol: 30 (unchanged)
+Changes since 3.0.5:
+
+  BUG FIXES:
+
+    - Fixed a --read-batch hang when rsync is reading a batch file that was
+      created from an incremental-recursion transfer.
+
+    - Fixed the daemon's socket code to handle the simultaneous arrival of
+      multiple connections.
+
+    - Fix --safe-links/--copy-unsafe-links to properly handle symlinks that
+      have consecutive slashes in the value.
+
+    - Fixed the parsing of an [IPv6_LITERAL_ADDR] when a USER@ is prefixed.
+
+    - The sender now skips a (bogus) symlink that has a 0-length value, which
+      avoids a transfer error in the receiver.
+
+    - Fixed a case where the sender could die with a tag-0 error if there was
+      an I/O during the sending of the file list.
+
+    - Fixed the rrsync script to avoid a server-side problem when -e is at the
+      start of the short options.
+
+    - Fixed a problem where a vanished directory could turn into an exit code
+      23 instead of the proper exit code 24.
+
+    - Fixed the --iconv conversion of symlinks when doing a local copy.
+
+    - Fixed a problem where --one-file-system was not stopping deletions on the
+      receiving side when a mount-point directory did not match a directory in
+      the transfer.
+
+    - Fixed the dropping of an ACL mask when no named ACL values were present.
+
+    - Fixed an ACL/xattr corruption issue where the --backup option could cause
+      rsync to associate the wrong ACL/xattr information with received files.
+
+    - Fixed the use of --xattrs with --only-write-batch.
+
+    - Fixed the use of --dry-run with --read-batch.
+
+    - Fixed configure's erroneous use of target.
+
+    - Fixed configure's --disable-debug option.
+
+    - Fixed a run-time issue for systems that can't find iconv_open() by adding
+      the --disable-iconv-open configure option.
+
+    - Complain and die if the user tries to combine --remove-source-files (or
+      the deprecated --remove-sent-files) with --read-batch.
+
+    - Fixed an failure transferring special files from Solaris to Linux.
+
+\f
+NEWS for rsync 3.0.5 (28 Dec 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.4:
+
+  BUG FIXES:
+
+    - Initialize xattr data in a couple spots in the hlink code, which avoids a
+      crash when the xattr pointer's memory happens to start out non-zero.
+      Also fixed the itemizing of an alt-dest file's xattrs when hard-linking.
+
+    - Don't send a bogus "-" option to an older server if there were no short
+      options specified.
+
+    - Fixed skipping of unneeded updates in a batch file when incremental
+      recursion is active.  Added a test for this.  Made batch-mode handle
+      "redo" files properly (and without hanging).
+
+    - Fix the %P logfile escape when the daemon logs from inside a chroot.
+
+    - Fixed the use of -s (--protect-args) when used with a remote source or
+      destination that had an empty path (e.g. "host:").  Also fixed a problem
+      when -s was used when accessing a daemon via a remote-shell.
+
+    - Fixed the use of a dot-dir path (e.g. foo/./bar) inside a --files-from
+      file when the root of the transfer isn't the current directory.
+
+    - Fixed a bug with "-K --delete" removing symlinks to directories when
+      incremental recursion is active.
+
+    - Fixed a hard to trigger hang when using --remove-source-files.
+
+    - Got rid of an annoying delay when accessing a daemon via a remote-shell.
+
+    - Properly ignore (superfluous) source args on a --read-batch command.
+
+    - Improved the manpage's description of the '*' wildcard to remove the
+      confusing "non-empty" qualifier.
+
+    - Fixed reverse lookups in the compatibility-library version of
+      getnameinfo().
+
+    - Fixed a bug when using --sparse on a sparse file that has over 2GB of
+      consecutive sparse data.
+
+    - Avoid a hang when using at least 3 --verbose options on a transfer with a
+      client sender (which includes local copying).
+
+    - Fixed a problem with --delete-delay reporting an error when it was ready
+      to remove a directory that was now gone.
+
+    - Got rid of a bunch of "warn_unused_result" compiler warnings.
+
+    - If an ftruncate() on a received file fails, it now causes a partial-
+      transfer warning.
+
+    - Allow a path with a leading "//" to be preserved (CYGWIN only).
+
+  ENHANCEMENTS:
+
+    - Made the support/atomic-rsync script able to perform a fully atomic
+      update of the copied hierarchy when the destination is setup using a
+      particular symlink idiom.
+
+\f
+NEWS for rsync 3.0.4 (6 Sep 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.3:
+
+  BUG FIXES:
+
+    - Fixed a bug in the hard-linking code where it would sometimes try to
+      allocate 0 bytes of memory (which fails on some OSes, such as AIX).
+
+    - Fixed the hard-linking of files from a device that has a device number
+      of 0 (which seems to be a common device number on NetBSD).
+
+    - Fixed the handling of a --partial-dir that cannot be created.  This
+      particularly impacts the --delay-updates option (since the files cannot
+      be delayed without a partial-dir), and was potentially destructive if
+      the --remove-source-files was also specified.
+
+    - Fixed a couple issues in the --fake-super handling of xattrs when the
+      destination files have root-level attributes (e.g. selinux values) that
+      a non-root copy can't affect.
+
+    - Improved the keep-alive check in the generator to fire consistently in
+      incremental-recursion mode when --timeout is enabled.
+
+    - The --iconv option now converts the content of a symlink too, instead
+      of leaving it in the wrong character-set (requires 3.0.4 on both sides
+      of the transfer).
+
+    - When using --iconv, if a filename fails to convert on the receiving side,
+      this no longer makes deletions in the root-dir of the transfer fail
+      silently (the user now gets a warning about deletions being disabled
+      due to IO error as long as --ignore-errors was not specified).
+
+    - When using --iconv, if a server-side receiver can't convert a filename,
+      the error message sent back to the client no longer mangles the name
+      with the wrong charset conversion.
+
+    - Fixed a potential alignment issue in the IRIX ACL code when allocating
+      the initial "struct acl" object.  Also, cast mallocs to avoid warnings.
+
+    - Changed some errors that were going to stdout to go to stderr.
+
+    - Made human_num() and human_dnum() able to output a negative number
+      (rather than outputting a cryptic string of punctuation).
+
+  ENHANCEMENTS:
+
+    - Rsync will avoid sending an -e option to the server if an older protocol
+      is requested (and thus the option would not be useful).  This lets the
+      user specify the --protocol=29 option to access an overly-restrictive
+      server that is rejecting the protocol-30 use of -e to the server.
+
+    - Improved the message output for an RERR_PARTIAL exit.
+
+  DEVELOPER RELATED:
+
+    - The Makefile will not halt for just a timestamp change on the Makefile
+      or the configure files, only for actual changes in content.
+
+    - Changed some commands in the testsuite's xattrs.test that called "rsync"
+      instead of "$RSYNC".
+
+    - Enhanced the release scripts to be able to handle a branch release and
+      to do even more consistency checks on the files.
+
+\f
+NEWS for rsync 3.0.3 (29 Jun 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.2:
+
+  BUG FIXES:
+
+    - Fixed a wildcard matching problem in the daemon when a module has
+      "use chroot" enabled.
+
+    - Fixed a crash bug in the hard-link code.
+
+    - Fixed the sending of xattr directory information when the code finds a
+      --link-dest or --copy-dest directory with unchanged xattrs -- the
+      destination directory now gets these unchanged xattrs properly applied.
+
+    - Fixed an xattr-sending glitch that could cause an "Internal abbrev"
+      error.
+
+    - Fixed the combination of --xattrs and --backup.
+
+    - The generator no longer allows a '.' dir to be excluded by a daemon-
+      exclude rule.
+
+    - Fixed deletion handling when copying a single, empty directory (with no
+      files) to a differently named, non-existent directory.
+
+    - Fixed the conversion of spaces into dashes in the %M log escape.
+
+    - Fixed several places in the code that were not returning the right
+      errno when a function failed.
+
+    - Fixed the backing up of a device or special file into a backup dir.
+
+    - Moved the setting of the socket options prior to the connect().
+
+    - If rsync exits in the middle of a --progress output, it now outputs a
+      newline to help prevent the progress line from being overwritten.
+
+    - Fixed a problem with how a destination path with a trailing slash or
+      a trailing dot-dir was compared against the daemon excludes.
+
+    - Fixed the sending of large (size > 16GB) files when talking to an older
+      rsync (protocols < 30):  we now use a compatible block size limit.
+
+    - If a file's length is so huge that we overflow a checksum buffer count
+      (i.e. several hundred TB), warn the user and avoid sending an invalid
+      checksum struct over the wire.
+
+    - If a source arg is excluded, --relative no longer adds the excluded
+      arg's implied dirs to the transfer.  This fix also made the exclude
+      check happen in the better place in the sending code.
+
+    - Use the overflow_exit() function for overflows, not out_of_memory().
+
+    - Improved the code to better handle a system that has only 32-bit file
+      offsets.
+
+  ENHANCEMENTS:
+
+    - The rsyncd.conf manpage now consistently refers to the parameters in
+      the daemon config file as "parameters".
+
+    - The description of the --inplace option was improved.
+
+  EXTRAS:
+
+    - Added a new script in the support directory, deny-rsync, which allows
+      an admin to (temporarily) replace the rsync command with a script that
+      sends an error message to the remote client via the rsync protocol.
+
+  DEVELOPER RELATED:
+
+    - Fixed a testcase failure if the tests are run as root and made some
+      compatibility improvements.
+
+    - Improved the daemon tests, including checking module comments, the
+      listing of files, and the ensuring that daemon excludes can't affect
+      a dot-dir arg.
+
+    - Improved some build rules for those that build in a separate directory
+      from the source, including better install rules for the man pages, and
+      the fixing of a proto.h-tstamp rule that could make the binaries get
+      rebuild without cause.
+
+    - Improved the testsuite to work around a problem with some utilities
+      (e.g. cp -p & touch -r) rounding sub-second timestamps.
+
+    - Ensure that the early patches don't cause any generated-file hunks to
+      bleed-over into patches that follow.
+
+\f
 NEWS for rsync 3.0.2 (8 Apr 2008)
 Protocol: 30 (unchanged)
 Changes since 3.0.1:
 NEWS for rsync 3.0.2 (8 Apr 2008)
 Protocol: 30 (unchanged)
 Changes since 3.0.1:
@@ -290,6 +634,11 @@ Changes since 2.6.9:
     - Fixed rsync's ability to remove files that are not writable by the file's
       owner when rsync is running as the same user.
 
     - Fixed rsync's ability to remove files that are not writable by the file's
       owner when rsync is running as the same user.
 
+    - When transferring large files, the sender's hashtable of checksums is
+      kept at a more reasonable state of fullness (no more than 80% full) so
+      that the scanning of the hashtable will not bog down as the number of
+      blocks increases.
+
   ENHANCEMENTS:
 
     - A new incremental-recursion algorithm is now used when rsync is talking
   ENHANCEMENTS:
 
     - A new incremental-recursion algorithm is now used when rsync is talking
@@ -2745,6 +3094,11 @@ Changes since 2.4.6:
 \f
 Partial Protocol History
        RELEASE DATE    VER.    DATE OF COMMIT* PROTOCOL
 \f
 Partial Protocol History
        RELEASE DATE    VER.    DATE OF COMMIT* PROTOCOL
+       ?? ??? 2010     3.1.0   31 Aug 2008     31
+       31 Dec 2009     3.0.7                   30
+       08 May 2009     3.0.6                   30
+       28 Dec 2008     3.0.5                   30
+       06 Sep 2008     3.0.4                   30
        29 Jun 2008     3.0.3                   30
        08 Apr 2008     3.0.2                   30
        03 Apr 2008     3.0.1                   30
        29 Jun 2008     3.0.3                   30
        08 Apr 2008     3.0.2                   30
        03 Apr 2008     3.0.1                   30