-NEWS for rsync 2.6.4 (UNRELEASED)
-Protocol: 29 (changed)
-Changes since 2.6.3:
+NEWS for rsync 2.6.7 (UNRELEASED)
+Protocol: 29 (unchanged)
+Changes since 2.6.6:
- OUTPUT CHANGES:
+ BUG FIXES:
- - When rsync deletes a directory and outputs a verbose message about
- it, it now appends a trailing slash to the name instead of (only
- sometimes) outputting a preceding "directory " string.
+ - Made hard-links work with symlinks and devices again.
- - The --stats output will contain time file-list time statistics if
- both sides are 2.6.4, or if the local side is 2.6.4 and the files
- are being pushed (since the stats come from the sending side).
-
- BUG FIXES:
+ - If a device-file/special-file changes permissions, rsync now updates the
+ permissions without recreating the file.
- - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
- was only treating it as a special token in an rsync include/exclude
- file).
+ - If the user specifies a remote-host for both the source and destination,
+ we now output a syntax error rather than trying to open the destination
+ hostspec as a filename.
- - Avoid a mkdir warning when removing a directory in the destination
- that already exists in the --backup-dir.
+ - When --inplace creates a new destination file, rsync now creates it with
+ permissions 0600 instead of 0000 -- this makes restarting possible when
+ the transfer gets interrupted in the middle of sending a new file.
- - An OS that has a binary mode for its files (such as cygwin0 needed
- setmode(fd, O_BINARY) called on the temp-file we opened with
- mkstemp(). (Fix derived from the cygwin's rsync package.)
+ - Reject the combination of --inplace and --sparse since the sparse-output
+ algorithm doesn't work when overwriting existing data.
- - Fixed a potential hang when verbosity is high, the client side is
- the sender, and the file-list is large.
+ - Fixed the directory name in the error that is output when pop_dir()
+ fails.
- - We now check if the OS doesn't support using mknod() for creating
- FIFOs and sockets, and compile-in using mkfifo() and socket() when
- necessary.
+ - Really fixed the parsing of a "!" entry in .cvsignore files this time.
- - Fixed an off-by-one error in the handling of --max-delete=N.
+ - If the generator gets a stat() error on a file, output it (this used to
+ require at least -vv for the error to be seen).
- - One place in the code wasn't checking if fork() failed.
+ - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
+ the exit status properly and generate a better error.
- - The "ignore nonreadable" daemon parameter no longer affects symlinks
- that are being copied, even if they point nowhere.
+ ENHANCEMENTS:
- - If the OS does not have lchown() and its chown() tries to set the
- referent of a symlink (as it should), we no longer try to set the
- user and group of a symlink.
+ - Added the --append option that makes rsync append data onto files
+ that are longer on the source than the destination (this includes new
+ files).
- - The generator now properly runs the hard-link loop and the dir-time
- rewriting loop after we're sure that the redo phase is complete.
+ - Added the --min-size=SIZE option to exclude small files from the
+ transfer.
- - When --backup was specified with --partial-dir=DIR (where DIR is a
- relative path), the backup code was erroneously trying to backup a
- file that was put into the partial-dir.
+ - Added the --compress-level option to allow you to set how aggressive
+ rsync's compression should be (the option implies --compress).
- ENHANCEMENTS:
+ - Enhanced the parsing of the SIZE value for --min-size and --max-size.
+
+ - If lutimes() and/or lchmod() are around, use them to allow the
+ preservation of attributes on symlinks.
+
+ - Added two config items to the rsyncd.conf parsing: "pre-xfer exec"
+ and "post-xfer exec". These allow a command to be specified on a
+ per-module basis that will be run before and/or after a daemon-mode
+ transfer.
+
+ - When using the --relative option, you can now insert a dot dir in
+ the source path to indicate where the replication of the source dirs
+ should start. For example, if you specify a source path of
+ rsync://host/module/foo/bar/./baz/dir with -R, rsync would only
+ replicate the "baz/dir" part of the source path (note: a trailing
+ dot dir is unaffected unless it also has a trailing slash).
- - Rsync now supports popt's option aliases, which means that you can
- use /etc/popt and/or ~/.popt to create your own option aliases.
-
- - Added the --delete-during (--del) option which will delete files
- from on the receiving side incrementally as each directory in the
- transfer is being processed (which makes it more efficient than the
- default, before-the-transfer behavior of --delete). Note that the
- --del option is implemented as an internally-defined popt alias, so
- an rsync daemon that refuses "delete" (which, for safety's sake,
- really matches "delete*") will still refuse all delete options.
-
- - Added the --copy-dest option, which works like --link-dest except
- that it includes copies of identical files.
-
- - Added support for specifying multiple --compare-dest, --copy-dest, or
- --link-dest options, but only of a single type. (Promoted from the
- patches dir and enhanced.)
-
- - Added the --max-size option. (Promoted from the patches dir.)
-
- - The daemon-mode options were separated from the normal rsync options
- so that they can't be mixed together. This makes it impossible to
- start a daemon that had improper default option values that could
- cause problems (such as a hang or an abort) when a client connects.
-
- - The --bwlimit option may now be used in combination with --daemon
- to specify a default value for the daemon side and also a value
- that cannot be exceeded by a user-specified --bwlimit option.
-
- - Added the "port" parameter to the rsyncd.conf file. (Promoted from
- the patches dir.)
-
- - In _exit_cleanup(): when we are exiting with a partially-received
- file, we now flush any data in the write-cache before closing the
- partial file.
-
- - The --inplace support was enhanced to work with --compare-dest,
- --link-dest, and (the new) --copy-dest options.
-
- - Added the --dirs (-d) option for an easier way to copy directories
- without recursion.
-
- - Added the --list-only option which is mainly a way for the client to
- put the server into listing mode without needing to resort to any
- option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a
- non-recursive listing).
-
- - Added the --omit-dir-times (-O) option which will avoid updating the
- modified time for directories when --times was specified. For a
- really large transfer, this option will avoid an extra pass through
- the file-list at the end of the transfer to tweak all the directory
- times.
-
- - Added the --filter (-f) option and its helper option, -F. Filter
- rules are an extension to the existing include/exclude handling
- that also supports nested filter files as well as per-directory
- filter files (like .cvsignore, but with full filter-rule parsing).
- This new option was chosen in order to ensure that all existing
- include/exclude processing remained 100% compatible with older
- versions.
-
- - Added the --delay-updates option that puts all updated files into
- a temporary directory (by default ".~tmp~", but settable via the
- --partial-dir=DIR option) until the end of the transfer. This
- makes the updates a little more atomic for a large transfer.
-
- SUPPORT FILES:
-
- - Added support/atomic-rsync -- a perl script that will transfer some
- files using rsync, and then move the updated files into place all at
- once at the end of the transfer. Only works when pulling, and uses
- --link-dest and a parallel hierarchy of files to effect its update.
-
- - Added support/mnt-excl that takes the /proc/mounts file and
- translates it into a set of excludes that will exclude all mount
- points (even mapped mounts to the same disk). The excludes are made
- relative to the specified source dir and properly anchored.
-
- - Added support/savetransfer.c -- a C program that can make a copy of
- all the data that flows over the wire. This lets you test for data
- corruption (by saving the data on both the sending side and the
- receiving side) or provides a way to help debug a protocol error.
-
- - Added support/rrsync -- my version of Joe Smith's restricted rsync
- perl script. This helps to ensure that only certain rsync commands
- can be run by an ssh invocation.
+ - Added some new --no-FOO options that make it easier to override
+ unwanted implied or default options. For example, "-a --no-o" (aka
+ "--archive --no-owner") can be used to turn off the preservation of
+ file ownership that is implied by -a.
+
+ - Allow the --temp-dir option to be specified when starting a daemon,
+ which sets the default temporary directory for incoming files.
+
+ - If --delete is combined with --dirs without --recursive, rsync will
+ now delete in any directory whose content is being synchronized.
+
+ - Some minor documentation improvements.
+
+ - Updated some diffs in the patches dir.
INTERNAL:
- - Added better checking of the checksum header values that come over
- the socket.
+ - Some buffer sizes were expanded a bit, particularly on systems where
+ MAXPATHLEN is overly small (e.g. cygwin).
+
+ - If io_printf() tries to format more data than fits in the buffer, exit
+ with an error instead of transmitting a truncated buffer.
+
+ - If a va_copy macro is defined, lib/snprintf.c will use it when defining
+ the VA_COPY macro.
- - Improved the type of some variables for consistency and proper size.
+ DEVELOPER RELATED:
- BUILD CHANGES:
+ - Several diffs in the patches dir now use the proper --enable-FOO
+ configure option instead of --with-FOO to turn on the inclusion of
+ the newly patched feature.
- - Handle an operating system that use mkdev() in place of makedev().
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff