extern int verbose;
+
+/****************************************************************************
+Set a fd into nonblocking mode
+****************************************************************************/
+void set_nonblocking(int fd)
+{
+ int val;
+
+ if((val = fcntl(fd, F_GETFL, 0)) == -1)
+ return;
+ if (!(val & NONBLOCK_FLAG)) {
+ val |= NONBLOCK_FLAG;
+ fcntl(fd, F_SETFL, val);
+ }
+}
+
/****************************************************************************
-Set a fd into nonblocking mode. Uses POSIX O_NONBLOCK if available,
-else
-if SYSV use O_NDELAY
-if BSD use FNDELAY
+Set a fd into blocking mode
****************************************************************************/
-int set_nonblocking(int fd)
+void set_blocking(int fd)
{
int val;
-#ifdef O_NONBLOCK
-#define FLAG_TO_SET O_NONBLOCK
+
+ if((val = fcntl(fd, F_GETFL, 0)) == -1)
+ return;
+ if (val & NONBLOCK_FLAG) {
+ val &= ~NONBLOCK_FLAG;
+ fcntl(fd, F_SETFL, val);
+ }
+}
+
+
+/* create a file descriptor pair - like pipe() but use socketpair if
+ possible (because of blocking issues on pipes)
+
+ always set non-blocking
+ */
+int fd_pair(int fd[2])
+{
+ int ret;
+
+#if HAVE_SOCKETPAIR
+ ret = socketpair(AF_UNIX, SOCK_STREAM, 0, fd);
#else
-#ifdef SYSV
-#define FLAG_TO_SET O_NDELAY
-#else /* BSD */
-#define FLAG_TO_SET FNDELAY
-#endif
+ ret = pipe(fd);
#endif
+
+ if (ret == 0) {
+ set_nonblocking(fd[0]);
+ set_nonblocking(fd[1]);
+ }
- if((val = fcntl(fd, F_GETFL, 0)) == -1)
- return -1;
- val |= FLAG_TO_SET;
- return fcntl( fd, F_SETFL, val);
-#undef FLAG_TO_SET
+ return ret;
}
-/* this is taken from CVS */
+/* this is derived from CVS code
+
+ note that in the child STDIN is set to blocking and STDOUT
+ is set to non-blocking. This is necessary as rsh relies on stdin being blocking
+ and ssh relies on stdout being non-blocking
+
+ if blocking_io is set then use blocking io on both fds. That can be
+ used to cope with badly broken rsh implementations like the one on
+ solaris.
+ */
int piped_child(char **command,int *f_in,int *f_out)
{
int pid;
int to_child_pipe[2];
int from_child_pipe[2];
+ extern int blocking_io;
- if (pipe(to_child_pipe) < 0 ||
- pipe(from_child_pipe) < 0) {
+ if (fd_pair(to_child_pipe) < 0 ||
+ fd_pair(from_child_pipe) < 0) {
rprintf(FERROR,"pipe: %s\n",strerror(errno));
exit_cleanup(RERR_IPC);
}
if (to_child_pipe[0] != STDIN_FILENO) close(to_child_pipe[0]);
if (from_child_pipe[1] != STDOUT_FILENO) close(from_child_pipe[1]);
umask(orig_umask);
+ set_blocking(STDIN_FILENO);
+ if (blocking_io) {
+ set_blocking(STDOUT_FILENO);
+ }
execvp(command[0], command);
rprintf(FERROR,"Failed to exec %s : %s\n",
command[0],strerror(errno));
*f_in = from_child_pipe[0];
*f_out = to_child_pipe[1];
- set_nonblocking(*f_in);
- set_nonblocking(*f_out);
-
return pid;
}
int to_child_pipe[2];
int from_child_pipe[2];
- if (pipe(to_child_pipe) < 0 ||
- pipe(from_child_pipe) < 0) {
+ if (fd_pair(to_child_pipe) < 0 ||
+ fd_pair(from_child_pipe) < 0) {
rprintf(FERROR,"pipe: %s\n",strerror(errno));
exit_cleanup(RERR_IPC);
}
char buf[1024 * 8];
int len; /* Number of bytes read into `buf'. */
- ifd = open(source, O_RDONLY);
+ ifd = do_open(source, O_RDONLY, 0);
if (ifd == -1) {
rprintf(FERROR,"open %s: %s\n",
source,strerror(errno));
return -1;
return do_rename(from, to);
#endif
- }
-
-
-/* sleep for a while via select */
-void u_sleep(int usec)
-{
- struct timeval tv;
-
- tv.tv_sec = 0;
- tv.tv_usec = usec;
- select(0, NULL, NULL, NULL, &tv);
}
}
-static void glob_expand_one(char *s, char **argv, int *argc, int maxargs, int sanitize_paths)
+static void glob_expand_one(char *s, char **argv, int *argc, int maxargs)
{
#if !(defined(HAVE_GLOB) && defined(HAVE_GLOB_H))
if (!*s) s = ".";
(*argc)++;
return;
#else
+ extern int sanitize_paths;
glob_t globbuf;
int i;
if (!*s) s = ".";
- s = strdup(s);
- sanitize_path(s);
- argv[*argc] = s;
+ argv[*argc] = strdup(s);
+ if (sanitize_paths) {
+ sanitize_path(argv[*argc], NULL);
+ }
memset(&globbuf, 0, sizeof(globbuf));
glob(argv[*argc], 0, NULL, &globbuf);
#endif
}
-void glob_expand(char *base1, char **argv, int *argc, int maxargs, int sanitize_paths)
+void glob_expand(char *base1, char **argv, int *argc, int maxargs)
{
char *s = argv[*argc];
char *p, *q;
while ((p = strstr(q,base)) && ((*argc) < maxargs)) {
/* split it at this point */
*p = 0;
- glob_expand_one(q, argv, argc, maxargs, sanitize_paths);
+ glob_expand_one(q, argv, argc, maxargs);
q = p+strlen(base);
}
- if (*q && (*argc < maxargs)) glob_expand_one(q, argv, argc, maxargs, sanitize_paths);
+ if (*q && (*argc < maxargs)) glob_expand_one(q, argv, argc, maxargs);
free(s);
free(base);
/*
* Make path appear as if a chroot had occurred:
* 1. remove leading "/" (or replace with "." if at end)
- * 2. remove leading ".." components
+ * 2. remove leading ".." components (except those allowed by "reldir")
* 3. delete any other "<dir>/.." (recursively)
+ * Can only shrink paths, so sanitizes in place.
* While we're at it, remove double slashes and "." components like
* clean_fname does(), but DON'T remove a trailing slash because that
* is sometimes significant on command line arguments.
- * Can only shrink paths, so sanitizes in place.
+ * If "reldir" is non-null, it is a sanitized directory that the path will be
+ * relative to, so allow as many ".." at the beginning of the path as
+ * there are components in reldir. This is used for symbolic link targets.
+ * If reldir is non-null and the path began with "/", to be completely like
+ * a chroot we should add in depth levels of ".." at the beginning of the
+ * path, but that would blow the assumption that the path doesn't grow and
+ * it is not likely to end up being a valid symlink anyway, so just do
+ * the normal removal of the leading "/" instead.
* Contributed by Dave Dykstra <dwd@bell-labs.com>
*/
-void sanitize_path(char *p)
+void sanitize_path(char *p, char *reldir)
{
char *start, *sanp;
+ int depth = 0;
+ int allowdotdot = 0;
+ if (reldir) {
+ depth++;
+ while (*reldir) {
+ if (*reldir++ == '/') {
+ depth++;
+ }
+ }
+ }
start = p;
sanp = p;
while (*p == '/') {
/* skip following slashes */
;
}
- } else if ((*p == '.') && (*(p+1) == '.') &&
+ continue;
+ }
+ allowdotdot = 0;
+ if ((*p == '.') && (*(p+1) == '.') &&
((*(p+2) == '/') || (*(p+2) == '\0'))) {
- /* skip ".." component followed by slash or end */
- p += 2;
- if (*p == '/')
- p++;
- if (sanp != start) {
- /* back up sanp one level */
- --sanp; /* now pointing at slash */
- while ((sanp > start) && (*(sanp - 1) != '/')) {
- /* skip back up to slash */
- sanp--;
+ /* ".." component followed by slash or end */
+ if ((depth > 0) && (sanp == start)) {
+ /* allow depth levels of .. at the beginning */
+ --depth;
+ allowdotdot = 1;
+ } else {
+ p += 2;
+ if (*p == '/')
+ p++;
+ if (sanp != start) {
+ /* back up sanp one level */
+ --sanp; /* now pointing at slash */
+ while ((sanp > start) && (*(sanp - 1) != '/')) {
+ /* skip back up to slash */
+ sanp--;
+ }
}
+ continue;
}
- } else {
- while (1) {
- /* copy one component through next slash */
- *sanp++ = *p++;
- if ((*p == '\0') || (*(p-1) == '/')) {
- while (*p == '/') {
- /* skip multiple slashes */
- p++;
- }
- break;
+ }
+ while (1) {
+ /* copy one component through next slash */
+ *sanp++ = *p++;
+ if ((*p == '\0') || (*(p-1) == '/')) {
+ while (*p == '/') {
+ /* skip multiple slashes */
+ p++;
}
+ break;
}
}
+ if (allowdotdot) {
+ /* move the virtual beginning to leave the .. alone */
+ start = sanp;
+ }
}
- if (sanp == start) {
+ if ((sanp == start) && !allowdotdot) {
/* ended up with nothing, so put in "." component */
+ /*
+ * note that the !allowdotdot doesn't prevent this from
+ * happening in all allowed ".." situations, but I didn't
+ * think it was worth putting in an extra variable to ensure
+ * it since an extra "." won't hurt in those situations.
+ */
*sanp++ = '.';
}
*sanp = '\0';
static OFF_T last_ofs;
-void end_progress(void)
+void end_progress(OFF_T size)
{
extern int do_progress, am_server;
if (do_progress && !am_server) {
- rprintf(FINFO,"\n");
+ rprintf(FINFO,"%.0f (100%%)\n", (double)size);
}
last_ofs = 0;
}
return(TimeBuf);
}
+
+/*******************************************************************
+sleep for a specified number of milliseconds
+********************************************************************/
+void msleep(int t)
+{
+ int tdiff=0;
+ struct timeval tval,t1,t2;
+
+ gettimeofday(&t1, NULL);
+ gettimeofday(&t2, NULL);
+
+ while (tdiff < t) {
+ tval.tv_sec = (t-tdiff)/1000;
+ tval.tv_usec = 1000*((t-tdiff)%1000);
+
+ errno = 0;
+ select(0,NULL,NULL, NULL, &tval);
+
+ gettimeofday(&t2, NULL);
+ tdiff = (t2.tv_sec - t1.tv_sec)*1000 +
+ (t2.tv_usec - t1.tv_usec)/1000;
+ }
+}
+
+
+#ifdef __INSURE__
+#include <dlfcn.h>
+
+/*******************************************************************
+This routine is a trick to immediately catch errors when debugging
+with insure. A xterm with a gdb is popped up when insure catches
+a error. It is Linux specific.
+********************************************************************/
+int _Insure_trap_error(int a1, int a2, int a3, int a4, int a5, int a6)
+{
+ static int (*fn)();
+ int ret;
+ char cmd[1024];
+
+ sprintf(cmd, "/usr/X11R6/bin/xterm -display :0 -T Panic -n Panic -e /bin/sh -c 'cat /tmp/ierrs.*.%d ; gdb /proc/%d/exe %d'",
+ getpid(), getpid(), getpid());
+
+ if (!fn) {
+ static void *h;
+ h = dlopen("/usr/local/parasoft/insure++lite/lib.linux2/libinsure.so", RTLD_LAZY);
+ fn = dlsym(h, "_Insure_trap_error");
+ }
+
+ ret = fn(a1, a2, a3, a4, a5, a6);
+
+ system(cmd);
+
+ return ret;
+}
+#endif
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff