--modify-window=NUM compare mod times with reduced accuracy
-T --temp-dir=DIR create temporary files in directory DIR
--compare-dest=DIR also compare received files relative to DIR
- --link-dest=DIR create hardlinks to DIR for unchanged files
+ --copy-dest=DIR ... and include copies of unchanged files
+ --link-dest=DIR hardlink to files in DIR when unchanged
-P equivalent to --partial --progress
-z, --compress compress file data
-C, --cvs-exclude auto ignore files in the same way CVS does
verb(
--daemon run as an rsync daemon
--address=ADDRESS bind to the specified address
+ --bwlimit=KBPS limit I/O bandwidth, KBytes per second
--config=FILE specify alternate rsyncd.conf file
--no-detach do not detach from the parent
--port=PORT specify alternate rsyncd port number
you want to send several different directories at the same time. For
example, if you used the command
-verb(rsync foo/bar/foo.c remote:/tmp/)
+verb(rsync /foo/bar/foo.c remote:/tmp/)
then this would create a file called foo.c in /tmp/ on the remote
machine. If instead you used
-verb(rsync -R foo/bar/foo.c remote:/tmp/)
+verb(rsync -R /foo/bar/foo.c remote:/tmp/)
then a file called /tmp/foo/bar/foo.c would be created on the remote
-machine -- the full path name is preserved.
+machine -- the full path name is preserved. To limit the amount of
+path information that is sent, do something like this:
+
+verb(cd /foo
+rsync -R bar/foo.c remote:/tmp/)
+
+That would create /tmp/bar/foo.c on the remote machine.
dit(bf(--no-relative)) Turn off the --relative option. This is only
needed if you want to use --files-from without its implied --relative
backup suffix used with the --backup (-b) option. The default suffix is a ~
if no --backup-dir was specified, otherwise it is an empty string.
-dit(bf(-u, --update)) This forces rsync to skip any files for which the
-destination file already exists and has a date later than the source
-file.
+dit(bf(-u, --update)) This forces rsync to skip any files which exist on
+the destination and have a modified time that is newer than the source
+file. (If an existing destination file has a modify time equal to the
+source file's, it will be updated if the sizes are different.)
-In the currently implementation, a difference of file format is always
+In the current implementation of --update, a difference of file format
+between the sender and receiver is always
considered to be important enough for an update, no matter what date
is on the objects. In other words, if the source has a directory or a
symlink where the destination has a file, the transfer would occur
bound.
The option implies --partial (since an interrupted transfer does not delete
-the file), but conflicts with --partial-dir, --compare-dest, and
+the file), but conflicts with --partial-dir, --compare-dest, --copy-dest, and
--link-dest (a future rsync version will hopefully update the protocol to
-remove these restrictions).
+remove some of these restrictions).
WARNING: The file's data will be in an inconsistent state during the
transfer (and possibly afterward if the transfer gets interrupted), so you
transferred on the receiving side. The default behavior is to create
the temporary files in the receiving directory.
-dit(bf(--compare-dest=DIR)) This option instructs rsync to use DIR on
-the destination machine as an additional directory to compare destination
-files against when doing transfers if the files are missing in the
-destination directory. This is useful for doing transfers to a new
-destination while leaving existing files intact, and then doing a
-flash-cutover when all files have been successfully transferred (for
-example by moving directories around and removing the old directory,
-although this skips files that haven't changed; see also --link-dest).
-This option increases the usefulness of --partial because partially
-transferred files will remain in the new temporary destination until they
-have a chance to be completed. If DIR is a relative path, it is relative
-to the destination directory.
-
-dit(bf(--link-dest=DIR)) This option behaves like bf(--compare-dest) but
-also will create hard links from em(DIR) to the destination directory for
-unchanged files. Files with changed ownership or permissions will not be
-linked.
+dit(bf(--compare-dest=DIR)) This option instructs rsync to use em(DIR) on
+the destination machine as an additional hierarchy to compare destination
+files against doing transfers (if the files are missing in the destination
+directory). If a file is found in em(DIR) that is identical to the
+sender's file, the file will NOT be transferred to the destination
+directory. This is useful for creating a sparse backup of just files that
+have changed from an earlier backup.
+
+Beginning in version 2.6.4, multiple --compare-dest directories may be
+provided and rsync will search the list in the order specified until it
+finds an existing file. That first discovery is used as the basis file,
+and also determines if the transfer needs to happen.
+
+If em(DIR) is a relative path, it is relative to the destination directory.
+See also --copy-dest and --link-dest.
+
+dit(bf(--copy-dest=DIR)) This option behaves like bf(--compare-dest), but
+rsync will also copy unchanged files found in em(DIR) to the destination
+directory (using the data in the em(DIR) for an efficient copy). This is
+useful for doing transfers to a new destination while leaving existing
+files intact, and then doing a flash-cutover when all files have been
+successfully transferred.
+
+If em(DIR) is a relative path, it is relative to the destination directory.
+See also --compare-dest and --link-dest.
+
+dit(bf(--link-dest=DIR)) This option behaves like bf(--copy-dest), but
+unchanged files are hard linked from em(DIR) to the destination directory.
+The files must be identical in all preserved attributes (e.g. permissions,
+possibly ownership) in order for the files to be linked together.
An example:
verb(
rsync -av --link-dest=$PWD/prior_dir host:src_dir/ new_dir/
)
-Like bf(--compare-dest) if DIR is a relative path, it is relative to the
-destination directory.
+Beginning with version 2.6.4, if more than one --link-dest option is
+specified, rsync will try to find an exact match to link with (searching
+the list in the order specified), and if not found, a basis file from one
+of the em(DIR)s will be selected to try to speed up the transfer.
+
+If em(DIR) is a relative path, it is relative to the destination directory.
+See also --compare-dest and --copy-dest.
+
Note that rsync versions prior to 2.6.1 had a bug that could prevent
--link-dest from working properly for a non-root user when -o was specified
(or implied by -a). If the receiving rsync is not new enough, you can work
make a subsequent transfer of the rest of the file much faster.
dit(bf(--partial-dir=DIR)) Turns on --partial mode, but tells rsync to
-put a partially transferred file into DIR instead of writing out the
+put a partially transferred file into em(DIR) instead of writing out the
file to the destination dir. Rsync will also use a file found in this
dir as data to speed up the transfer (i.e. when you redo the send after
rsync creates a partial file) and delete such a file after it has served
Rsync will create the dir if it is missing (just the last dir -- not the
whole path). This makes it easy to use a relative path (such as
"--partial-dir=.rsync-partial") to have rsync create the partial-directory
-in the destination file's directory (rsync will also try to remove the DIR
+in the destination file's directory (rsync will also try to remove the em(DIR)
if a partial file was found to exist at the start of the transfer and the
DIR was specified as a relative path).
data over the wire and data being matched locally), and the estimated time
remaining in this transfer.
-After the a file is complete, it the data looks like this:
+After a file is complete, the data looks like this:
verb(
1238099 100% 146.38kB/s 0:00:08 (5, 57.1% of 396)
when run as a daemon with the --daemon option or when connecting to a
rsync server. The --address option allows you to specify a specific IP
address (or hostname) to bind to. This makes virtual hosting possible
-in conjunction with the --config option.
+in conjunction with the --config option. See also the "address" global
+option in the rsyncd.conf manpage.
+
+dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum
+transfer rate in kilobytes per second for the data the daemon sends.
+The client can still specify a smaller --bwlimit value, but their
+requested value will be rounded down if they try to exceed it. See the
+client version of this option (above) for some extra details.
dit(bf(--config=FILE)) This specifies an alternate config file than
the default. This is only relevant when --daemon is specified.
sshd.
dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
-rather than the default port 873.
+rather than the default port 873. See also the "port" global option in
+the rsyncd.conf manpage.
dit(bf(-4, --ipv4) or bf(-6, --ipv6)) Tells rsync to prefer IPv4/IPv6
when creating the incoming sockets that the rsync daemon will use to
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff