# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
-# This program is distributable under the terms of the GNU GPL see
+# This program is distributable under the terms of the GNU GPL (see
# COPYING).
# Test the output of various copy commands to ensure itemized output
. "$suitedir/rsync.fns"
-set -x
+case "$RSYNC" in
+*protocol=29*)
+ sed_cmd='/_P30_/d; s/_P29_//'
+ ;;
+*)
+ sed_cmd='/_P29_/d; s/_P30_//'
+ ;;
+esac
-itemregex='^[.<>ch][dfDL][c .+][s .+][tT .+][p .+][o .+][g .+][a .+] '
-
-lddir="$tmpdir/ld"
+to2dir="$tmpdir/to2"
+chkfile="$scratchdir/rsync.chk"
outfile="$scratchdir/rsync.out"
makepath "$fromdir/foo"
makepath "$fromdir/bar/baz"
-cp -p "$srcdir/config.h" "$fromdir/foo/config1"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config1"
cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
cp -p "$srcdir/rsync.h" "$fromdir/bar/baz/rsync"
chmod 600 "$fromdir"/foo/config? "$fromdir/bar/baz/rsync"
+umask 0
ln -s ../bar/baz/rsync "$fromdir/foo/sym"
+umask 022
ln "$fromdir/foo/config1" "$fromdir/foo/extra"
+# Check if the OS can hard-link symlinks or not
+ln -s no-such-dir "$to2dir"
+if ln "$to2dir" "$to2dir.test" 2>/dev/null; then
+ L=hL
+else
+ L=cL
+fi
+rm -f "$to2dir" "$to2dir.test"
+
$RSYNC -iplr "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 1 failed"
-cd+++++++ bar/
-cd+++++++ bar/baz/
->f+++++++ bar/baz/rsync
-cd+++++++ foo/
->f+++++++ foo/config1
->f+++++++ foo/config2
->f+++++++ foo/extra
-cL+++++++ foo/sym -> ../bar/baz/rsync
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+cd+++++++++ ./
+cd+++++++++ bar/
+cd+++++++++ foo/_P30_
+cd+++++++++ bar/baz/
+>f+++++++++ bar/baz/rsync
+cd+++++++++ foo/_P29_
+>f+++++++++ foo/config1
+>f+++++++++ foo/config2
+>f+++++++++ foo/extra
+cL+++++++++ foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 1 failed"
# Ensure there are no accidental directory-time problems.
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
-cp -p "$srcdir/config.h" "$fromdir/foo/config2"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
chmod 601 "$fromdir/foo/config2"
$RSYNC -iplrH "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 2 failed"
->f..T.... bar/baz/rsync
->f..T.... foo/config1
->f.sTp... foo/config2
-hf..T.... foo/extra => foo/config1
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+>f..T...... bar/baz/rsync
+>f..T...... foo/config1
+>f.sTp..... foo/config2
+hf..T...... foo/extra => foo/config1
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 2 failed"
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
sleep 1 # For directory mod below to ensure time difference
rm "$todir/foo/sym"
+umask 0
ln -s ../bar/baz "$todir/foo/sym"
+umask 022
cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
chmod 600 "$fromdir/foo/config2"
chmod 777 "$todir/bar/baz/rsync"
$RSYNC -iplrtc "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 3 failed"
-.f..tp... bar/baz/rsync
-.d..t.... foo/
-.f..t.... foo/config1
->fcstp... foo/config2
-cL..T.... foo/sym -> ../bar/baz/rsync
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+.d..t...... foo/_P30_
+.f..tp..... bar/baz/rsync
+.d..t...... foo/_P29_
+.f..t...... foo/config1
+>fcstp..... foo/config2
+cL..T...... foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 3 failed"
-cp -p "$srcdir/config.h" "$fromdir/foo/config2"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
chmod 600 "$fromdir/foo/config2"
# Lack of -t is for unchanged hard-link stress-test!
$RSYNC -vvplrH "$fromdir/" "$todir/" \
- | sed -e '1,/done$/d' -e '/--whole-file/d' -e '/total:/d' -e '/^$/,$d' \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 4 failed"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
bar/baz/rsync is uptodate
foo/config1 is uptodate
foo/config2
-"foo/extra" is a hard link
+foo/extra is uptodate
foo/sym is uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 4 failed"
chmod 747 "$todir/bar/baz/rsync"
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
$RSYNC -ivvplrtH "$fromdir/" "$todir/" \
- | grep "$itemregex" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 5 failed"
-.d ./
-.d bar/
-.d bar/baz/
-.f...p... bar/baz/rsync
-.d foo/
-.f foo/config1
->f..t.... foo/config2
-hf foo/extra
-.L foo/sym -> ../bar/baz/rsync
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+.d ./
+.d bar/
+.d bar/baz/
+.f...p..... bar/baz/rsync
+.d foo/
+.f foo/config1
+>f..t...... foo/config2
+hf foo/extra
+.L foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 5 failed"
chmod 757 "$todir/foo/config1"
touch "$todir/foo/config2"
$RSYNC -vplrtH "$fromdir/" "$todir/" \
- | sed -e '/done$/d' -e '/^$/,$d' \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 6 failed"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
foo/config2
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 6 failed"
chmod 757 "$todir/foo/config1"
touch "$todir/foo/config2"
$RSYNC -iplrtH "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 7 failed"
-.f...p... foo/config1
->f..t.... foo/config2
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+.f...p..... foo/config1
+>f..t...... foo/config2
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 7 failed"
+
+$RSYNC -ivvplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+cd ./
+cd bar/
+cd bar/baz/
+cf bar/baz/rsync
+cd foo/
+cf foo/config1
+cf foo/config2
+hf foo/extra => foo/config1
+cL foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 8 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+hf foo/extra => foo/config1
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 9 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --copy-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra => foo/config1
+foo/sym is uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 10 failed"
-mv "$todir" "$lddir"
-$RSYNC -ivvplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
- | grep "$itemregex" \
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 8 failed"
-.d..t.... ./
-cd+++++++ bar/
-cd+++++++ bar/baz/
-cf....... bar/baz/rsync
-cd+++++++ foo/
-cf....... foo/config1
-cf....... foo/config2
-hf+++++++ foo/extra => foo/config1
-cL+++++++ foo/sym -> ../bar/baz/rsync
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+cd ./
+cd bar/
+cd bar/baz/
+hf bar/baz/rsync
+cd foo/
+hf foo/config1
+hf foo/config2
+hf foo/extra => foo/config1
+$L foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 11 failed"
-rm -rf "$todir"
-$RSYNC -iplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --dry-run --link-dest=../to "$fromdir/" "$to2dir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 9 failed"
-.d..t.... ./
-cd+++++++ bar/
-cd+++++++ bar/baz/
-cd+++++++ foo/
-hf+++++++ foo/extra => foo/config1
-cL+++++++ foo/sym -> ../bar/baz/rsync
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 12 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --link-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 13 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra is uptodate
+foo/sym is uptodate
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 14 failed"
+
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+cd ./
+cd bar/
+cd bar/baz/
+.f bar/baz/rsync
+cd foo/
+.f foo/config1
+.f foo/config2
+.f foo/extra
+.L foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 15 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 16 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+sed -e "$sed_cmd" <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra is uptodate
+foo/sym is uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 17 failed"
# The script would have aborted on error, so getting here means we've won.
exit 0