# Copyright (C) 2005 by Wayne Davison <wayned@samba.org>
-# This program is distributable under the terms of the GNU GPL see
+# This program is distributable under the terms of the GNU GPL (see
# COPYING).
# Test the output of various copy commands to ensure itemized output
. "$suitedir/rsync.fns"
-set -x
-
-itemregex='^[.<>ch][dfDL][c .+][s .+][tT .+][p .+][o .+][g .+][a .+] '
-
-lddir="$tmpdir/ld"
+to2dir="$tmpdir/to2"
+chkfile="$scratchdir/rsync.chk"
outfile="$scratchdir/rsync.out"
makepath "$fromdir/foo"
makepath "$fromdir/bar/baz"
-cp -p "$srcdir/config.h" "$fromdir/foo/config1"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config1"
cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
cp -p "$srcdir/rsync.h" "$fromdir/bar/baz/rsync"
chmod 600 "$fromdir"/foo/config? "$fromdir/bar/baz/rsync"
+umask 0
ln -s ../bar/baz/rsync "$fromdir/foo/sym"
+umask 022
ln "$fromdir/foo/config1" "$fromdir/foo/extra"
+rm -f "$to2dir"
+
+# Check if rsync is set to hard-link symlinks.
+if egrep '^#define CAN_HARDLINK_SYMLINK 1' config.h >/dev/null; then
+ L=hL
+else
+ L=cL
+fi
+
+# Check if rsync can preserve time on symlinks
+case "$RSYNC" in
+*protocol=2*)
+ T=.T
+ ;;
+*)
+ if $RSYNC --version | grep ", symtimes" >/dev/null; then
+ T=.t
+ else
+ T=.T
+ fi
+ ;;
+esac
$RSYNC -iplr "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 1 failed"
-cd+++++++ bar/
-cd+++++++ bar/baz/
->f+++++++ bar/baz/rsync
-cd+++++++ foo/
->f+++++++ foo/config1
->f+++++++ foo/config2
->f+++++++ foo/extra
-cL+++++++ foo/sym -> ../bar/baz/rsync
+cat <<EOT >"$chkfile"
+cd$all_plus ./
+cd$all_plus bar/
+cd$all_plus bar/baz/
+>f$all_plus bar/baz/rsync
+cd$all_plus foo/
+>f$all_plus foo/config1
+>f$all_plus foo/config2
+>f$all_plus foo/extra
+cL$all_plus foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 1 failed"
# Ensure there are no accidental directory-time problems.
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
-cp -p "$srcdir/config.h" "$fromdir/foo/config2"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
chmod 601 "$fromdir/foo/config2"
$RSYNC -iplrH "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 2 failed"
->f..T.... bar/baz/rsync
->f..T.... foo/config1
->f.sTp... foo/config2
-hf..T.... foo/extra => foo/config1
+cat <<EOT >"$chkfile"
+>f..T.$dots bar/baz/rsync
+>f..T.$dots foo/config1
+>f.sTp$dots foo/config2
+hf..T.$dots foo/extra => foo/config1
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 2 failed"
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
sleep 1 # For directory mod below to ensure time difference
rm "$todir/foo/sym"
+umask 0
ln -s ../bar/baz "$todir/foo/sym"
+umask 022
cp -p "$srcdir/config.h.in" "$fromdir/foo/config2"
chmod 600 "$fromdir/foo/config2"
chmod 777 "$todir/bar/baz/rsync"
$RSYNC -iplrtc "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 3 failed"
-.f..tp... bar/baz/rsync
-.d..t.... foo/
-.f..t.... foo/config1
->fcstp... foo/config2
-cL..T.... foo/sym -> ../bar/baz/rsync
+cat <<EOT >"$chkfile"
+.f..tp$dots bar/baz/rsync
+.d..t.$dots foo/
+.f..t.$dots foo/config1
+>fcstp$dots foo/config2
+cLc$T.$dots foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 3 failed"
-cp -p "$srcdir/config.h" "$fromdir/foo/config2"
+cp -p "$srcdir/configure.in" "$fromdir/foo/config2"
chmod 600 "$fromdir/foo/config2"
# Lack of -t is for unchanged hard-link stress-test!
$RSYNC -vvplrH "$fromdir/" "$todir/" \
- | sed -e '1,/done$/d' -e '/--whole-file/d' -e '/total:/d' -e '/^$/,$d' \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 4 failed"
+filter_outfile
+cat <<EOT >"$chkfile"
bar/baz/rsync is uptodate
foo/config1 is uptodate
foo/config2
-"foo/extra" is a hard link
+foo/extra is uptodate
foo/sym is uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 4 failed"
chmod 747 "$todir/bar/baz/rsync"
$RSYNC -a -f '-! */' "$fromdir/" "$todir"
$RSYNC -ivvplrtH "$fromdir/" "$todir/" \
- | grep "$itemregex" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 5 failed"
-.d ./
-.d bar/
-.d bar/baz/
-.f...p... bar/baz/rsync
-.d foo/
-.f foo/config1
->f..t.... foo/config2
-hf foo/extra
-.L foo/sym -> ../bar/baz/rsync
+filter_outfile
+cat <<EOT >"$chkfile"
+.d$allspace ./
+.d$allspace bar/
+.d$allspace bar/baz/
+.f...p$dots bar/baz/rsync
+.d$allspace foo/
+.f$allspace foo/config1
+>f..t.$dots foo/config2
+hf$allspace foo/extra
+.L$allspace foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 5 failed"
chmod 757 "$todir/foo/config1"
touch "$todir/foo/config2"
$RSYNC -vplrtH "$fromdir/" "$todir/" \
- | sed -e '/done$/d' -e '/^$/,$d' \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 6 failed"
+filter_outfile
+cat <<EOT >"$chkfile"
foo/config2
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 6 failed"
chmod 757 "$todir/foo/config1"
touch "$todir/foo/config2"
$RSYNC -iplrtH "$fromdir/" "$todir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 7 failed"
-.f...p... foo/config1
->f..t.... foo/config2
+cat <<EOT >"$chkfile"
+.f...p$dots foo/config1
+>f..t.$dots foo/config2
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 7 failed"
+
+$RSYNC -ivvplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+case `tail -1 "$outfile"` in
+cLc.t*)
+ sym_dots="c.t.$dots"
+ L_sym_dots="cL$sym_dots"
+ is_uptodate='-> ../bar/baz/rsync'
+ echo "cL$sym_dots foo/sym $is_uptodate" >"$chkfile.extra"
+ L=cL
+ ;;
+*)
+ sym_dots="$allspace"
+ L_sym_dots=".L$allspace"
+ is_uptodate='is uptodate'
+ touch "$chkfile.extra"
+ ;;
+esac
+cat <<EOT >"$chkfile"
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+cf$allspace bar/baz/rsync
+cd$allspace foo/
+cf$allspace foo/config1
+cf$allspace foo/config2
+hf$allspace foo/extra => foo/config1
+cL$sym_dots foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 8 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --copy-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+hf$allspace foo/extra => foo/config1
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 9 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --copy-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra => foo/config1
+foo/sym $is_uptodate
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 10 failed"
+
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+hf$allspace bar/baz/rsync
+cd$allspace foo/
+hf$allspace foo/config1
+hf$allspace foo/config2
+hf$allspace foo/extra => foo/config1
+$L$sym_dots foo/sym -> ../bar/baz/rsync
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 11 failed"
-mv "$todir" "$lddir"
-$RSYNC -ivvplrtH --copy-dest="$lddir" "$fromdir/" "$todir/" \
- | grep "$itemregex" \
+rm -rf "$to2dir"
+$RSYNC -iplrtH --dry-run --link-dest=../to "$fromdir/" "$to2dir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 8 failed"
-.d..t.... ./
-cd+++++++ bar/
-cd+++++++ bar/baz/
-cf....... bar/baz/rsync
-cd+++++++ foo/
-cf....... foo/config1
-cf....... foo/config2
-hf+++++++ foo/extra => foo/config1
-cL+++++++ foo/sym -> ../bar/baz/rsync
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 12 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --link-dest=../to "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 13 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --link-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra is uptodate
+foo/sym $is_uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 14 failed"
-rm -rf "$todir"
-$RSYNC -iplrtH --link-dest="$lddir" "$fromdir/" "$todir/" \
+rm -rf "$to2dir"
+$RSYNC -ivvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
| tee "$outfile"
-cat <<EOT | diff $diffopt - "$outfile" || test_fail "test 9 failed"
-.d..t.... ./
-cd+++++++ bar/
-cd+++++++ bar/baz/
-cd+++++++ foo/
-hf+++++++ foo/extra => foo/config1
-cL+++++++ foo/sym -> ../bar/baz/rsync
+filter_outfile
+cat <<EOT >"$chkfile"
+cd$allspace ./
+cd$allspace bar/
+cd$allspace bar/baz/
+.f$allspace bar/baz/rsync
+cd$allspace foo/
+.f$allspace foo/config1
+.f$allspace foo/config2
+.f$allspace foo/extra
+$L_sym_dots foo/sym -> ../bar/baz/rsync
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 15 failed"
+
+rm -rf "$to2dir"
+$RSYNC -iplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+cat - "$chkfile.extra" <<EOT >"$chkfile"
+EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 16 failed"
+
+rm -rf "$to2dir"
+$RSYNC -vvplrtH --compare-dest="$todir" "$fromdir/" "$to2dir/" \
+ | tee "$outfile"
+filter_outfile
+cat <<EOT >"$chkfile"
+./ is uptodate
+bar/ is uptodate
+bar/baz/ is uptodate
+bar/baz/rsync is uptodate
+foo/ is uptodate
+foo/config1 is uptodate
+foo/config2 is uptodate
+foo/extra is uptodate
+foo/sym $is_uptodate
EOT
+diff $diffopt "$chkfile" "$outfile" || test_fail "test 17 failed"
# The script would have aborted on error, so getting here means we've won.
exit 0