-NEWS for rsync 2.6.1 (UNRELEASED)
-Protocol: 28 (changed)
-Changes since 2.6.0:
+NEWS for rsync 3.0.0 (UNRELEASED)
+Protocol: 30 (changed)
+Changes since 2.6.9:
- ENHANCEMENTS:
+ NOTABLE CHANGE IN BEHAVIOR:
- * Lower memory use and more optimal transfer of data over
- the socket (see the INTERNAL section for details).
+ - The handling of implied directories when using --relative has changed
+ to send them as directories (e.g. no implied dir is ever sent as a
+ symlink). This avoids unexpected behavior and should not adversely
+ affect most people. If you're one of those rare people who relied
+ upon having an implied dir be duplicated as a symlink, either specify
+ --keep-dirlinks or --no-implied-dirs.
- * The RSYNC_PROXY environment variable can now contain a
- "USER:PASS@" prefix before the "HOST:PORT" information.
- (Bardur Arantsson)
+ BUG FIXES:
- * The --progress output now mentions how far along in the
- transfer we are, including both a count of files transferred
- and a percentage of the total file-count that we've processed.
- It also shows better current-rate-of-transfer and remaining-
- transfer-time values.
+ - Fixed the output of -ii when combined with one of the --*-dest options:
+ it now itemizes all the items, not just the changed ones.
- * The configure script now accepts --with-rsyncd-conf=PATH
- to override the default value of the /etc/rsyncd.conf file.
+ - Made the output of all file types consistent when using a --*-dest
+ option. Prior versions used to output too many creation events for
+ matching items.
- * Added a couple extra diffs in the "patches" dir, removed the
- ones that got applied, and rebuilt the rest.
+ - The code that waits for a child pid now handles being interrupted by a
+ signal. This fixes a problem with the pre-xfer exec function not being
+ able to get the exit status from the script.
- BUG FIXES:
+ - A negated filter rule (with a '!' modifier) no longer loses the negation
+ when sending the filter rules to the remote rsync.
+
+ - Fixed a problem with the --out-format (aka --log-format) option %f: it
+ would output superfluous directory information for a non-daemon rsync.
+
+ - Fixed a problem with -vv (double --verbose) and --stats when "pushing"
+ files (which includes local copies). Version 2.6.9 would complete the
+ copy, but exit with an error when the receiver output its memory stats.
+
+ - If --password-file is used on a non-daemon transfer, rsync now complains
+ and exits. This should help users figure out that they can't use this
+ option to control a remote shell's password prompt.
+
+ - Make sure that directory permissions of a newly-created destination
+ directory are handled right when --perms is left off.
+
+ - The itemized output of a newly-created destination directory is now
+ output as a creation event, not a change event.
+
+ - Improved --hard-link so that more corner cases are handled correctly
+ when combined with options such as --link-dest and/or --ignore-existing.
- * When -x (--one-file-system) is combined with -L (--copy-links)
- or --copy-unsafe-links, no symlinked files are skipped, even
- if the referant file is on a different filesystem.
+ - The --append option no longer updates a file that has the same size.
- * The --link-dest code now works properly for a non-root user
- when (1) the UIDs of the source and destination differ and -o
- was specified, or (2) when the group of the source can't be
- used on the destination and -g was specified.
+ - Fixed a bug when combining --backup and --backup-dir with --inplace:
+ any missing backup directories are now created.
- * Fixed a bug in the handling of -H (hard-links) that might
- cause the expanded PATH/NAME value of the current item to
- get overwritten (due to an expanded-name caching bug).
+ - Fixed a bug when using --backup and --inplace with --whole-file or
+ --read-batch: backup files are actually created now.
+
+ - Starting up an extra copy of an rsync daemon does not delete the pidfile
+ for the running daemon -- if the pidfile exists, the extra program will
+ exit with an error.
+
+ - The daemon pidfile is checked and created sooner in the startup sequence.
+
+ ENHANCEMENTS:
+
+ - A new incremental-recursion algorithm is now used when rsync is talking
+ to another 3.x version. This starts the transfer going more quickly
+ (before all the files have been found), and requires much less memory.
+ See the --recursive option in the manpage for some restrictions.
+
+ - Saved memory in the non-incremental-recursion algorithm for typical
+ option values (usually saving from 21-29 bytes per file).
+
+ - The default --delete algorithm is now --delete-during when talking to a
+ 3.x rsync. This is a faster scan than using --delete-before (which is
+ the default when talking to older rsync versions), and is compatible with
+ the new incremental recursion mode.
+
+ - Rsync now allows multiple remote-source args to be specified rather than
+ having to rely on a special space-splitting side-effect of the remote-
+ shell. Additional remote args must specify the same host or have an
+ empty hostname, as seen here: :file1 ::module/file2. This means that
+ local use of brace expansion now works: rsync -av host:path/{f1,f2} .
+
+ - Added the --delete-delay option, which is a more efficient way to delete
+ files at the end of the transfer without needing a separate delete pass.
+
+ - Added the --acls (-A) option to preserve Access Control Lists. This is
+ an improved version of the prior patch that was available, and it even
+ supports OS X ACLs. (If you need to have backward compatibility with
+ old, patched versions of rsync, apply the acls.diff file from the patches
+ dir.)
+
+ - Added the --xattrs (-X) option to preserver extended attributes. This is
+ an improved version of the prior patch that was available. (If you need
+ to have backward compatibility with old, patched versions of rsync, apply
+ the xattrs.diff file from the patches dir.)
+
+ - Added the --fake-super option that allows a non-super user to preserve
+ all attributes of a file by using a special extended-attribute idiom.
+ There is also an analogous "fake super" option for an rsync daemon.
+
+ - Added the --iconv option, which allows rsync to convert filenames from
+ one character-set to another during the transfer. The default is to make
+ this feature available as long as your system has iconv_open(). If
+ compilation fails, specify --disable-iconv to configure, and then
+ rebuild. If you want rsync to perform character-set conversions by
+ default, you can specify --enable-iconv=CONVERT_STRING with the default
+ value for the --iconv option that you wish to use. For example,
+ --enable-iconv=. is a good choice. See the rsync manpage for an
+ explanation of the --iconv option's settings.
+
+ - Added the --skip-compress=LIST option to override of the default list of
+ file suffixes that will not be compressed when using --compress.
- * We now reset the "new data has been sent" flag at the start
- of each file we send. This makes sure that an interrupted
- transfer with the --partial option set doesn't keep a shorter
- temp file than the current basis file when no new data has been
- transfered over the wire for that file.
+ - The daemon's default for "dont compress" was extended to include:
+ *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg
+ The matching routine was also optimized to run more quickly.
+
+ - The --max-delete option now outputs a warning if it skipped any file
+ deletions, including a count of how many deletions were skipped. (Older
+ versions just silently stopped deleting things.)
+
+ - You may specify --max-delete=0 to a 3.0.0 client to request that it warn
+ about extraneous files without deleting anything. If you're not sure
+ what version the client is, you can use the less-obvious --max-delete=-1,
+ as both old and new versions will treat that as the same request (though
+ older versions don't warn).
+
+ - The --hard-link option now uses less memory on both the sending and
+ receiving side for all protocol versions. For protocol 30, the use of a
+ hashtable on the sending side allows us to more efficiently convey to the
+ receiver what files are linked together. This reduces the amount of data
+ sent over the socket by a considerable margin (rather than adding more
+ data), and limits the in-memory storage of the device+inode information
+ to just the sending side for the new protocol 30, or to the receiving
+ side when speaking an older protocol (note that older rsync versions kept
+ the device+inode information on both sides).
- * Fixed a byte-order problem in --batch-mode on big-endian
- machines. (Jay Fenlason)
+ - The filter rules now support a perishable ("p") modifier that marks rules
+ that should not have an effect in a directory that is being deleted. e.g.
+ -f '-p .svn/' would only affect "live" .svn directories.
- * Fixed configure bug when running "./configure --disable-ipv6".
+ - If we get an error setting the time on a symlink, we don't complain about
+ it anymore (since some operating systems don't support that, and it's not
+ that important).
- * Fixed "make test" bug when build dir is not the source dir.
+ - Protocol 30 now uses MD5 checksums instead of MD4.
- * When using --cvs-exclude, the exclude items we get from a
- directory's .cvsignore file once again only affect that one
- directory (and not all following directories too).
+ - If a daemon module's "path" value is not an absolute pathname, the code
+ now makes it absolute internally (making it work properly).
- * When specifying the USER@HOST: prefix for a file, the USER
- part can now contain an '@', if needed (i.e. the last '@'
- is used to find the HOST, not the first).
+ - Changed the --append option to not checksum the existing data in the
+ destination file, which speeds up file appending.
- * Fixed some bugs in the handling of group IDs for non-root
- users: (1) It properly handles a group that the sender didn't
- have a name for (it would previously skip changing the group
- on any files in that group). (2) If --numeric-ids is used,
- rsync no longer attempts to set groups that the user doesn't
- have the permission to set.
+ - Added the --append-verify option, which works like the older --append
+ option (verifying the existing data in the destination file). For
+ compatibility with older rsync versions, any use of --append that is
+ talking protocol 29 or older will revert to the --append-verify method.
- * Fixed the "refuse options" setting in the rsyncd.conf file.
+ - Documented and extended the support for the RSYNC_CONNECT_PROG variable
+ that can be used to enhance the client side of a daemon connection.
- * Improved the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter. It is both more optimal
- (in that it no longer does a useless scan of the contents of
- the mount-point dirs) and also fixes a bug where a remaped
- mount of the original filesystem could get discovered on a
- disk we should be ignoring.
+ - Added the --protect-args (-s) option, that tells rsync to send most of
+ the command-line args at the start of the transfer rather than as args
+ to the remote-shell command. This protects them from space-splitting,
+ and only interprets basic wildcard special shell characters (*?[).
- * Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied them).
+ - Improved the dashes and double-quotes in the nroff manpage output.
- * Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
+ - We now support a lot more --no-OPTION override options.
INTERNAL:
- * Most of the I/O is now buffered, which results in a pretty
- large speedup when running under MS Windows. (Craig Barratt)
+ - The file-list sorting algorithm now uses a sort that keeps any same-
+ named items in the same order as they were specified. This allows
+ rsync to always ensure that the first of the duplicates is the one
+ that will be included in the copy. The new sort was also faster
+ than the glibc version of qsort() and mergesort() in my testing.
- * Optimizations to the name-handling/comparing code have made
- some significant reductions in user-CPU time for large file
- sets.
+ - Rsync now supports the transfer of 64-bit timestamps (time_t values).
- * Some variable-type cleanup that makes the code more consistent.
+ - Fixed a build problem with older (2.x) versions of gcc.
- * Reduced memory requirements of hard link preservation.
- (J.W. Schultz)
+ - Added some isType() functions that make dealing with signed characters
+ easier without forcing variables via casts.
- * Implemented a new algorithm for hard-link handling that speeds
- up the code significantly. (J.W. Schultz and Wayne Davison)
+ - Changed strcat/strcpy/sprintf function calls to use safer versions.
- * The --hard-link option now uses the first existing file in the
- group of linked files as the basis for the transfer. This
- prevents the sub-optimal transfer of a file's data when a new
- hardlink is added on the sending side and it sorts alphabetically
- earlier in the list than the files that are already present on the
- receiving side.
+ - Upgraded the included popt version to 1.10.2 and improved its use of
+ string-handling functions.
- * Dropped support for protocol versions less than 20
- (2.3.0 released 15 Mar 1999) and activated warnings for
- protocols less than 25 (2.5.0 released 23 Aug 2001)
- (Wayne Davison and J.W. Schultz, severally)
+ - Added missing prototypes for compatibility functions from the lib dir.
- * More optimal data transmission for --hard-links (protocol 28).
+ - Configure determines if iconv() has a const arg, allowing us to avoid a
+ compiler warning.
- * More optimal data transmission for --checksum (protocol 28).
+ - Made the sending of some numbers more efficient for protocol 30.
- * Less memory is used when --checksum is specified.
+ - Make sure that a daemon process doesn't mind if the client was weird and
+ omitted the --server option.
- * Less memory is used in the file list (a per-file savings).
+ - Improved the use of "const" on pointers.
- * The generator is now better about not modifying the file list
- during the transfer in order to avoid a copy-on-write memory
- bifurcation (on systems where fork() uses shared memory).
- Previously, rsync's shared memory would slowly become unshared,
- resulting in real memory usage nearly doubling on the receiving
- side by the end of the transfer. Now, as long as permissions
- are being preserved, the shared memory should remain that way
- for the entire transfer.
+ - Improved J.W.'s pool_alloc routines to add a way of freeing older
+ sections of a pool's memory.
- * Changed hardlink info and file_struct + strings to use
- allocation pools. This reduces memory use for large
- filesets and permits freeing memory to the OS. (J.W. Schultz)
+ DEVELOPER RELATED:
- * The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe
- and the protocol improved so that (1) it is now impossible to
- have the "redo" pipe fill up and hang rsync, and (2) trailing
- messages from the receiver don't get lost on their way through
- the generator over to the sender (the latter mainly affected
- hard-link messages and verbose --stats output).
+ - Rsync is now licensed under the GPLv3 or later.
- * The reading & writing of the file-list in batch-mode is now
- handled by the same code that sends & receives the list over
- the wire. This makes it much easier to maintain.
+ - When running the tests, we now put our per-test temp dirs into a sub-
+ directory named testtmp (which is created, if missing). This allows
+ someone to symlink the testtmp directory to another filesystem (which is
+ useful if the build dir's filesystem does not support ACLs and xattrs,
+ and another file system does).
- * Improved the internal uid/gid code to be more portable and
- a little more optimized.
+ - Rsync now has a way of handling protocol-version changes during the
+ development of a new protocol version. This exchange of sub-version
+ info does not interfere with the {MIN,MAX}_PROTOCOL_VERSION checking
+ in older versions (since we'd quickly exceed the MAX_PROTOCOL_VERSION
+ if we incremented the main PROTOCOL_VERSION value for every minor
+ change during development).
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff