-NEWS for rsync 2.6.1 (UNRELEASED)
-Protocol: 28 (changed)
-Changes since 2.6.0:
-
- ENHANCEMENTS:
-
- * Lower memory use and more optimal transfer of data over
- the socket (see the INTERNAL section for details).
-
- * The RSYNC_PROXY environment variable can now contain a
- "USER:PASS@" prefix before the "HOST:PORT" information.
- (Bardur Arantsson)
-
- * The --progress output now mentions how far along in the
- transfer we are, including both a count of files transferred
- and a percentage of the total file-count that we've processed.
- It also shows better current-rate-of-transfer and remaining-
- transfer-time values.
-
- * The configure script now accepts --with-rsyncd-conf=PATH
- to override the default value of the /etc/rsyncd.conf file.
-
- * Added a couple extra diffs in the "patches" dir, removed the
- ones that got applied, and rebuilt the rest.
+NEWS for rsync 2.6.9 (unreleased)
+Protocol: 29 (unchanged)
+Changes since 2.6.8:
BUG FIXES:
- * When -x (--one-file-system) is combined with -L (--copy-links)
- or --copy-unsafe-links, no symlinked files are skipped, even
- if the referant file is on a different filesystem.
+ - If rsync is interrupted via a handled signal (such as SIGINT), it will
+ once again clean-up its temp file from the destination dir.
- * The --link-dest code now works properly for a non-root user
- when (1) the UIDs of the source and destination differ and -o
- was specified, or (2) when the group of the source can't be
- used on the destination and -g was specified.
+ - Fixed an overzealous sanitizing bug in the handling of the --link-dest,
+ --copy-dest, and --compare-dest options to a daemon without chroot: if
+ the copy's destination dir is deeper than the top of the module's path,
+ these options now accept a safe number of parent-dir (../) references
+ (since these options are relative to the destination dir). The old code
+ incorrectly chopped off all "../" prefixes for these options, no matter
+ how deep the destination directory was in the module's hierarchy.
- * Fixed a bug in the handling of -H (hard-links) that might
- cause the expanded PATH/NAME value of the current item to
- get overwritten (due to an expanded-name caching bug).
-
- * We now reset the "new data has been sent" flag at the start
- of each file we send. This makes sure that an interrupted
- transfer with the --partial option set doesn't keep a shorter
- temp file than the current basis file when no new data has been
- transfered over the wire for that file.
+ - Fixed a bug where a deferred info/error/log message could get sent
+ directly to the sender instead of being handled by rwrite() in the
+ generator. This fixes an "unexpected tag 3" fatal error, and should
+ also fix a potential problem where a deferred info/error message from
+ the receiver might bypass the log file and get sent only to the client
+ process. (These problems could only affect an rsync daemon that was
+ receiving files.)
- * Fixed a byte-order problem in --batch-mode on big-endian
- machines. (Jay Fenlason)
+ - Fixed a bug where using --dry-run with a --*-dest option with a path
+ relative to a directory that does not yet exist: the affected option
+ gets its proper path value so that the output of the dry-run is right.
- * Fixed configure bug when running "./configure --disable-ipv6".
+ - Fixed a bug in the %f logfile escape when receiving files: the
+ destination path is now included in the output (e.g. you can now tell
+ when a user specifies a subdir inside a module).
- * Fixed "make test" bug when build dir is not the source dir.
+ - If the receiving side fails to create a directory, it will now skip
+ trying to update everything that is inside that directory.
- * When using --cvs-exclude, the exclude items we get from a
- directory's .cvsignore file once again only affect that one
- directory (and not all following directories too).
+ - If --link-dest is specified with --checksum but without --times, rsync
+ will now allow a hard-link to be created to a matching link-dest file
+ even when the file's modify-time doesn't match the server's file.
- * When specifying the USER@HOST: prefix for a file, the USER
- part can now contain an '@', if needed (i.e. the last '@'
- is used to find the HOST, not the first).
+ - The daemon now calls more timezone-using functions prior to doing a
+ chroot. This should help some C libraries to generate proper timestamps
+ from inside a chrooted daemon (and to not try to access /etc/timezone
+ over and over again).
- * Fixed some bugs in the handling of group IDs for non-root
- users: (1) It properly handles a group that the sender didn't
- have a name for (it would previously skip changing the group
- on any files in that group). (2) If --numeric-ids is used,
- rsync no longer attempts to set groups that the user doesn't
- have the permission to set.
+ - Fixed a bug in the handling of an absolute --partial-dir=ABS_PATH option:
+ it now deletes an alternate basis file from the partial-dir that was used
+ to successfully update a destination file.
- * Fixed the "refuse options" setting in the rsyncd.conf file.
+ - Fixed a bug in the handling of --delete-excluded when using a per-dir
+ merge file: the merge file is now honored on the receiving side, and
+ only its unqualified include/exclude commands are ignored (just as is
+ done for global include/excludes).
- * Improved the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter. It is both more optimal
- (in that it no longer does a useless scan of the contents of
- the mount-point dirs) and also fixes a bug where a remaped
- mount of the original filesystem could get discovered on a
- disk we should be ignoring.
+ - Fixed a recent bug where --delete was not working when transferring from
+ the root (/) of the filesystem with --relative enabled.
- * Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied them).
+ - Fixed a recent bug where an --exclude='*' could affect the root (/) of
+ the filesystem with --relative enabled.
- * Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
+ - When --inplace creates a file, it is now created with owner read/write
+ permissions (0600) instead of no permissions at all. This avoids a
+ problem continuing a transfer that was interrupted (since --inplace
+ will not update a file that has no write permissions).
- INTERNAL:
+ - If either --remove-source-files or --remove-sent-files is enabled and we
+ are unable to remove the source file, rsync now outputs an error.
- * Most of the I/O is now buffered, which results in a pretty
- large speedup when running under MS Windows. (Craig Barratt)
+ - Fixed a bug in the daemon's "incoming chmod" rule: newly-created
+ directories no longer get the 'F' (file) rules applied to them.
- * Optimizations to the name-handling/comparing code have made
- some significant reductions in user-CPU time for large file
- sets.
-
- * Some variable-type cleanup that makes the code more consistent.
-
- * Reduced memory requirements of hard link preservation.
- (J.W. Schultz)
-
- * Implemented a new algorithm for hard-link handling that speeds
- up the code significantly. (J.W. Schultz and Wayne Davison)
-
- * The --hard-link option now uses the first existing file in the
- group of linked files as the basis for the transfer. This
- prevents the sub-optimal transfer of a file's data when a new
- hardlink is added on the sending side and it sorts alphabetically
- earlier in the list than the files that are already present on the
- receiving side.
-
- * Dropped support for protocol versions less than 20
- (2.3.0 released 15 Mar 1999) and activated warnings for
- protocols less than 25 (2.5.0 released 23 Aug 2001)
- (Wayne Davison and J.W. Schultz, severally)
+ ENHANCEMENTS:
- * More optimal data transmission for --hard-links (protocol 28).
+ - Added the --log-file=FILE and --log-file-format=FORMAT options. These
+ can be used to tell any rsync to output what it is doing to a log file.
+ They work with a client rsync, a non-daemon server rsync (see the man
+ page for instructions), and also allows the overriding of rsyncd.conf
+ settings when starting a daemon.
- * More optimal data transmission for --checksum (protocol 28).
+ - The --log-format option was renamed to be --out-format to avoid confusing
+ it with affecting the log-file output. (The old option remains as an
+ alias for the new to preserve backward compatibility.)
- * Less memory is used when --checksum is specified.
+ - Made "log file" and "syslog facility" settable on a per-module basis in
+ the daemon's config file.
- * Less memory is used in the file list (a per-file savings).
+ - Added the --remove-source-files option as a replacement for the (now
+ deprecated) --remove-sent-files option. This new option removes all
+ non-dirs from the source directories, even if the file was already
+ up-to-date. This fixes a problem where interrupting an rsync that
+ was using --remove-sent-files and restarting it could leave behind
+ a file that the earlier rsync synchronized, but didn't get to remove.
+ (The deprecated --remove-sent-files is still understood for now, and
+ still behaves in the same way as before.)
- * The generator is now better about not modifying the file list
- during the transfer in order to avoid a copy-on-write memory
- bifurcation (on systems where fork() uses shared memory).
- Previously, rsync's shared memory would slowly become unshared,
- resulting in real memory usage nearly doubling on the receiving
- side by the end of the transfer. Now, as long as permissions
- are being preserved, the shared memory should remain that way
- for the entire transfer.
+ - Added a new environment variable to the pre-/post-xfer exec commands (in
+ the daemon's config file): RSYNC_PID. This value will be the same in
+ both the pre- and post-xfer commands, so it can be used if the pre-xfer
+ command wants to cache some arg/request info for the post-xfer command.
- * Changed hardlink info and file_struct + strings to use
- allocation pools. This reduces memory use for large
- filesets and permits freeing memory to the OS. (J.W. Schultz)
+ DEVELOPER RELATED:
- * The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe
- and the protocol improved so that (1) it is now impossible to
- have the "redo" pipe fill up and hang rsync, and (2) trailing
- messages from the receiver don't get lost on their way through
- the generator over to the sender (the latter mainly affected
- hard-link messages and verbose --stats output).
+ - The acls.diff and xattrs.diff patches have received a bunch of work to
+ make them much closer to being acceptable in the main distribution.
- * The reading & writing of the file-list in batch-mode is now
- handled by the same code that sends & receives the list over
- the wire. This makes it much easier to maintain.
+ - Updated config.guess and config.sub to their 2006-02-23 version.
- * Improved the internal uid/gid code to be more portable and
- a little more optimized.
+ - Updated various files to include the latest FSF address and to have
+ consistent opening comments.
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff