Merged in the security fixes from 2.5.7.
[rsync/rsync.git] / rsync.h
diff --git a/rsync.h b/rsync.h
index 317c545..3a39f15 100644 (file)
--- a/rsync.h
+++ b/rsync.h
 #define SAME_TIME (1<<7)
 
 /* update this if you make incompatible changes */
-#define PROTOCOL_VERSION 26
+#define PROTOCOL_VERSION 27
 
 /* We refuse to interoperate with versions that are not in this range.
  * Note that we assume we'll work with later versions: the onus is on
  * people writing them to make sure that they don't send us anything
  * we won't understand.
  *
- * There are two possible explanations for the limit at thirty: either
- * to allow new major-rev versions that do not interoperate with us,
- * and (more likely) so that we can detect an attempt to connect rsync
- * to a non-rsync server, which is unlikely to begin by sending a byte
- * between 15 and 30. */
-#define MIN_PROTOCOL_VERSION 15
-#define MAX_PROTOCOL_VERSION 30
+ * Interoperation with old but supported protocol versions
+ * should cause a warning to be printed.  At a future date
+ * the old protocol will become the minimum and
+ * compatibility code removed.
+ *
+ * There are two possible explanations for the limit at
+ * MAX_PROTOCOL_VERSION: either to allow new major-rev versions that
+ * do not interoperate with us, and (more likely) so that we can
+ * detect an attempt to connect rsync to a non-rsync server, which is
+ * unlikely to begin by sending a byte between MIN_PROTOCL_VERSION and
+ * MAX_PROTOCOL_VERSION. */
+
+#define MIN_PROTOCOL_VERSION 17
+#define OLD_PROTOCOL_VERSION 20
+#define MAX_PROTOCOL_VERSION 40
 
 #define RSYNC_PORT 873
 
 
 #define MPLEX_BASE 7
 
+#define NO_EXCLUDES    0
+#define SERVER_EXCLUDES        1
+#define ALL_EXCLUDES   2
+
+#define MISSING_OK    0
+#define MISSING_FATAL 1
+
+#define ADD_INCLUDE 1
+#define ADD_EXCLUDE 0
+
 /* Log values.  I *think* what these mean is: FLOG goes to the server
  * logfile; FERROR and FINFO try to end up on the client, with
  * different levels of filtering. */
@@ -106,6 +124,10 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
 #include <stdlib.h>
 #endif
 
+#if defined(HAVE_MALLOC_H) && (defined(HAVE_MALLINFO) || !defined(HAVE_STDLIB_H))
+#include <malloc.h>
+#endif
+
 #ifdef HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
 #endif
@@ -114,10 +136,6 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
 #include <string.h>
 #endif
 
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
-
 #ifdef TIME_WITH_SYS_TIME
 #include <sys/time.h>
 #include <time.h>
@@ -174,20 +192,10 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
 #endif
 #endif
 
-#ifdef HAVE_FNMATCH
-#include <fnmatch.h>
-#else
-#include "lib/fnmatch.h"
-#endif
-
 #ifdef HAVE_GLOB_H
 #include <glob.h>
 #endif
 
-#ifdef HAVE_MALLOC_H
-#  include <malloc.h>
-#endif
-
 /* these are needed for the uid/gid mapping code */
 #include <pwd.h>
 #include <grp.h>
@@ -273,6 +281,17 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
 #define NO_INT64
 #endif
 
+#if (SIZEOF_LONG == 8) 
+#define uint64 unsigned long
+#elif (SIZEOF_INT == 8) 
+#define uint64 unsigned int
+#elif HAVE_LONGLONG
+#define uint64 unsigned long long
+#else
+/* As long as it gets... */
+#define uint64 unsigned off_t
+#endif
+
 /* Starting from protocol version 26, we always use 64-bit
  * ino_t and dev_t internally, even if this platform does not
  * allow files to have 64-bit inums.  That's because the
@@ -304,8 +323,8 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
  * cope with platforms on which this is an unsigned int or even a
  * struct.  Later.
  */ 
-#define INO64_T int64
-#define DEV64_T int64
+#define INO64_T uint64
+#define DEV64_T uint64
 
 #ifndef MIN
 #define MIN(a,b) ((a)<(b)?(a):(b))
@@ -322,11 +341,17 @@ enum logcode {FNONE=0, FERROR=1, FINFO=2, FLOG=3 };
 /* the length of the md4 checksum */
 #define MD4_SUM_LENGTH 16
 #define SUM_LENGTH 16
+#define SHORT_SUM_LENGTH 2
+#define BLOCKSUM_BIAS 10
 
 #ifndef MAXPATHLEN
 #define MAXPATHLEN 1024
 #endif
 
+#ifndef NAME_MAX
+#define NAME_MAX 255
+#endif
+
 #ifndef INADDR_NONE
 #define INADDR_NONE 0xffffffff
 #endif
@@ -385,23 +410,35 @@ struct sum_struct {
        OFF_T flength;          /**< total file length */
        size_t count;           /**< how many chunks */
        size_t remainder;       /**< flength % block_length */
-       size_t n;               /**< block_length */
+       size_t blength;         /**< block_length */
+       size_t s2length;        /**< sum2_length */
        struct sum_buf *sums;   /**< points to info for each chunk */
 };
 
 struct map_struct {
-       char *p;
-       int fd,p_size,p_len;
-       OFF_T file_size, p_offset, p_fd_offset;
+       char *p;                /* Window pointer                       */
+       int fd;                 /* File Descriptor                      */
+       int p_size;             /* Window size at allocation            */
+       int p_len;              /* Window size after fill               */
+                               /*    p_size and p_len could be
+                                *    consolodated by using a local
+                                *    variable in map_ptr()             */
+       int status;             /* first errno from read errors         */
+       OFF_T file_size;        /* File size (from stat)                */
+       OFF_T p_offset;         /* Window start                         */
+       OFF_T p_fd_offset;      /* offset of cursor in fd ala lseek     */
 };
 
+#define MATCHFLG_WILD          0x0001 /* pattern has '*', '[', and/or '?' */
+#define MATCHFLG_WILD2         0x0002 /* pattern has '**' */
+#define MATCHFLG_WILD2_PREFIX  0x0004 /* pattern starts with '**' */
+#define MATCHFLG_ABS_PATH      0x0008 /* path-match on absolute path */
 struct exclude_struct {
        char *pattern;
-       int regular_exp;
-       int fnmatch_flags;
+       int match_flags;
        int include;
        int directory;
-       int local;
+       int slash_cnt;
 };
 
 struct stats {
@@ -428,6 +465,7 @@ static inline int flist_up(struct file_list *flist, int i)
 
 #include "byteorder.h"
 #include "lib/mdfour.h"
+#include "lib/wildmatch.h"
 #include "lib/permstring.h"
 #include "lib/addrinfo.h"
 
@@ -442,11 +480,13 @@ int asprintf(char **ptr, const char *format, ...);
 int vasprintf(char **ptr, const char *format, va_list ap);
 #endif
 
-#if !defined(HAVE_VSNPRINTF) && !defined(HAVE_C99_VSNPRINTF)
-int vsnprintf (char *str, size_t count, const char *fmt, va_list args);
+#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#define vsnprintf rsync_vsnprintf
+int vsnprintf(char *str, size_t count, const char *fmt, va_list args);
 #endif
 
-#if !defined(HAVE_SNPRINTF) && !defined(HAVE_C99_VSNPRINTF)
+#if !defined(HAVE_SNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#define snprintf rsync_snprintf
 int snprintf(char *str,size_t count,const char *fmt,...);
 #endif
 
@@ -586,6 +626,10 @@ extern int errno;
 
 #endif
 
+/* Convenient wrappers for malloc and realloc.  Use them. */
+#define new(type) ((type *)malloc(sizeof(type)))
+#define new_array(type, num) ((type *)_new_array(sizeof(type), (num)))
+#define realloc_array(ptr, type, num) ((type *)_realloc_array((ptr), sizeof(type), (num)))
 
 /* use magic gcc attributes to catch format errors */
  void rprintf(enum logcode , const char *, ...)
@@ -602,6 +646,10 @@ void rsyserr(enum logcode, int, const char *, ...)
 #define inet_ntoa rep_inet_ntoa
 #endif
 
+/* Make sure that the O_BINARY flag is defined. */
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
 
 #ifndef HAVE_STRLCPY
 size_t strlcpy(char *d, const char *s, size_t bufsize);