-NEWS for rsync 2.6.3 (UNRELEASED)
-Protocol: 28 (unchanged)
-Changes since 2.6.2:
+NEWS for rsync 3.1.0 (UNRELEASED)
+Protocol: 31 (changed)
+Changes since 3.0.4:
+
+ OUTPUT CHANGES:
+
+ - Output numbers in 3-digit groups by default (e.g. 1,234,567). See the
+ --human-readable option for a way to turn it off. See also the daemon's
+ "log format" parameter and related command-line options (including
+ --out-format) for a modifier that can be used to request digit-grouping
+ or human-readable output in log escapes. (Note that log output is
+ unchanged by default.)
+
+ - The output of the --progress option has changed: the string "xfer" was
+ shortened to "xfr", and the string "to-check" was shortened to "to-chk",
+ both designed to make room for the (by default) wider display of file
+ size numbers without making the total line-length longer. Also, when
+ incremental recursion is enabled, the string "ir-chk" will be used
+ instead of "to-chk" up until the incremental-recursion scan is done,
+ letting you know that the value to check and the total value will still
+ be increasing as new files are found.
BUG FIXES:
- - Fixed a crash bug that might appear when --delete was used and
- multiple source directories were specified.
+ - Changed the way --progress overwrites its prior output in order to make
+ it nearly impossible for the progress to get overwritten by an error.
- - The --backup code no longer attempts to create some directories
- over and over again (generating warnings along the way).
-
- - Fixed a bug in the reading of the secrets file (by the daemon) and
- the password file (by the client): the files no longer need to be
- terminated by a newline for their content to be read in.
-
- - If a file has a read error on the sending side, the receiver will
- no longer keep the resulting file unless the --partial option was
- specified.
-
- - Fixed an age-old crash problem with --read-batch on a local copy
- (rsync was improperly assuming --whole-file for the local copy).
-
- - Files specified in the daemon's "exclude" or "exclude from" config
- items are now excluded from being uploaded (if the module is not
- read-only) as well as downloaded.
-
- - When using --backup without a --backup-dir, rsync no longer preserves
- the modify time on directories. This avoids confusing NFS.
-
- - Fixed a bug in the daemon authentication code when using one of the
- batch-processing options.
+ - An absolute-path filter rule (i.e. with a '/' modifier) no longer loses
+ its modifier when sending the filter rules to the remote rsync.
ENHANCEMENTS:
- - Added the "write only" option to the daemon's config file.
-
- - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
- and documented all these options in the man page.
-
- INTERNAL:
+ - Added the --remote-option=OPT (-M OPT) command-line option that is useful
+ for things like sending a remote --log-file=FILE or --fake-super option.
- - Some cleanup in the exclude code has saved some memory and made
- things easier to maintain.
+ - Added the --info=FLAGS and --debug=FLAGS options to allow finer-grained
+ control over what is output. Added an extra type of --progress output
+ using --info=progress2.
- - Use rsyserr() in the various places that were still calling
- rprintf() with strerror() as an arg.
+ - Added the --delete-missing-args and --ignore-missing-args options to
+ either delete or ignore user-specified files on the receiver that are
+ missing on the sender (normally the absence of user-specified files
+ generates an error).
- BUILD CHANGES:
+ - Added a "T" (terabyte) category to the --human-readable size suffixes.
- - Added a "gen" target to rebuild most of the various generated
- files, including configure, config.h.in, the man pages, and
- proto.h.
+ - Enhanced the --stats output: 1) to mention how many files were created
+ (protocol >= 28), 2) to mention how many files were deleted (new for
+ protocol 31), and 3) to follow the file-count, created-count, and
+ deleted-count with a break-out list of each count by type.
- - The timestamp of the proto.h file is unaltered by "make proto"
- if the contents don't change.
+ - Added the --usermap/--groupmap/--chown options for manipulating file
+ ownership during the copy.
- DEVELOPER RELATED:
-
- - The scripts in the testsuite dir were cleaned up a bit.
-
-NEWS for rsync 2.6.2 (30 Apr 2004)
-Protocol: 28 (unchanged)
-Changes since 2.6.1:
-
- BUG FIXES:
-
- - Fixed a major bug in the sorting of the filenames when --relative
- is used for some sources (just sources such as "/" and "/*" were
- affected). This fix ensures that we ask for the right file-list
- item when requesting changes from the sender.
+ - Added the "%C" escape to the log-output handling, which will output the
+ MD5 checksum of any transferred file, or all files if --checksum was
+ specified (when protocol 30 or above is in effect).
- - Rsync now checks the return value of the close() function to
- better report disk-full problems on an NFS file system.
+ - Added the "reverse lookup" parameter to the rsync daemon config file to
+ allow reverse-DNS lookups to be disabled.
- - Restored the old daemon-server behavior of logging error messages
- rather than returning them to the user. (A better long-term fix
- will be sought in the future.)
+ - Added a way for supplementary groups to be specified in the rsyncd.conf
+ file. Also made explicitly-set uid/gid values no longer ignored by a
+ daemon that was not run by a super-user.
- - An obscure uninitialized-variable bug was fixed in the uid/gid
- code. (This bug probably had no ill effects.)
+ - When replacing a non-dir with a symlink/hard-link/device/special-file,
+ the update should now be done in an atomic manner.
- BUILD CHANGES:
+ - When backing up a file, try to hard-link the file into place so that the
+ upcoming replacement of the destination file will be atomic.
- - Got rid of the configure check for sys/sysctl.h (it wasn't used
- and was causing a problem on some systems). Also improved the
- broken-largefile-locking test to try to avoid failure due to an
- NFS build-dir.
+ EXTRAS:
- - Fixed a compile problem on systems that don't define
- AI_NUMERICHOST.
+ - Added an "instant-rsyncd" script to the support directory, which makes
+ it easy to configure a simple rsync daemon in the current directory.
- - Fixed a compile problem in the popt source for compilers that
- don't support __attribute__.
+ - Added the "mapfrom" and "mapto" scripts to the support directory, which
+ makes it easier to do user/group mapping in a local transfer based on
+ passwd/group files from another machine.
DEVELOPER RELATED:
- - Improved the testsuite's "merge" test to work on OSF1.
-
- - Two new diffs were added to the patches dir.
-
-\f
-NEWS for rsync 2.6.1 (26 Apr 2004)
-Protocol: 28 (changed)
-Changes since 2.6.0:
-
- SECURITY FIXES:
-
- - Paths sent to an rsync daemon are more thoroughly sanitized when
- chroot is not used. If you're running a non-read-only rsync
- daemon with chroot disabled, *please upgrade*, ESPECIALLY if the
- user privs you run rsync under is anything above "nobody".
-
- ENHANCEMENTS:
-
- - Lower memory use, more optimal transfer of data over the socket,
- and lower CPU usage (see the INTERNAL section for details).
-
- - The RSYNC_PROXY environment variable can now contain a
- "USER:PASS@" prefix before the "HOST:PORT" information.
- (Bardur Arantsson)
-
- - The --progress output now mentions how far along in the transfer
- we are, including both a count of files transferred and a
- percentage of the total file-count that we've processed. It also
- shows better current-rate-of-transfer and remaining-transfer-time
- values.
-
- - Documentation changes now attempt to describe some often mis-
- understood features more clearly.
-
- BUG FIXES:
-
- - When -x (--one-file-system) is combined with -L (--copy-links) or
- --copy-unsafe-links, no symlinked files are skipped, even if the
- referent file is on a different filesystem.
-
- - The --link-dest code now works properly for a non-root user when
- (1) the UIDs of the source and destination differ and -o was
- specified, or (2) when the group of the source can't be used on
- the destination and -g was specified.
-
- - Fixed a bug in the handling of -H (hard-links) that might cause
- the expanded PATH/NAME value of the current item to get
- overwritten (due to an expanded-name caching bug).
-
- - We now reset the "new data has been sent" flag at the start of
- each file we send. This makes sure that an interrupted transfer
- with the --partial option set doesn't keep a shorter temp file
- than the current basis file when no new data has been transfered
- over the wire for that file.
-
- - Fixed a byte-order problem in --batch-mode on big-endian machines.
- (Jay Fenlason)
-
- - When using --cvs-exclude, the exclude items we get from a
- per-directory's .cvsignore file once again only affect that one
- directory (not all following directories too). The items are also
- now properly word-split and parsed without any +/- prefix parsing.
-
- - When specifying the USER@HOST: prefix for a file, the USER part
- can now contain an '@', if needed (i.e. the last '@' is used to
- find the HOST, not the first).
+ - The filter code received some refactoring to make it more extendable, to
+ read better, and do better sanity checking.
- - Fixed some bugs in the handling of group IDs for non-root users:
- (1) It properly handles a group that the sender didn't have a name
- for (it would previously skip changing the group on any files in
- that group). (2) If --numeric-ids is used, rsync no longer
- attempts to set groups that the user doesn't have the permission
- to set.
-
- - Fixed the "refuse options" setting in the rsyncd.conf file.
-
- - Improved the -x (--one-file-system) flag's handling of any mount-
- point directories we encounter. It is both more optimal (in that
- it no longer does a useless scan of the contents of the mount-
- point dirs) and also fixes a bug where a remapped mount of the
- original filesystem could get discovered in a subdir we should be
- ignoring.
-
- - Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied them).
-
- - Path-specifying options to a daemon should now work the same with
- or without chroot turned on. Previously, such a option (such as
- --link-dest) would get its absolute path munged into a relative
- one if chroot was not on, making that setting fairly useless.
- Rsync now transforms the path into one that is based on the
- module's base dir when chroot is not enabled.
-
- - Fixed a compatibility problem interacting with older rsync
- versions that might send us an empty --suffix value without
- telling us that --backup-dir was specified.
-
- - The "hosts allow" option for a daemon-over-remote-shell process
- now has improved support for IPv6 addresses and a fix for systems
- that have a length field in their socket structs.
-
- - Fixed the ability to request an empty backup --suffix when sending
- files to an rsync daemon.
-
- INTERNAL:
-
- - Most of the I/O is now buffered, which results in a pretty large
- speedup when running under MS Windows. (Craig Barratt)
-
- - Optimizations to the name-handling/comparing code have made some
- significant reductions in user-CPU time for large file sets.
-
- - Some cleanup of the variable types make the code more consistent.
-
- - Reduced memory requirements of hard link preservation.
- (J.W. Schultz)
-
- - Implemented a new algorithm for hard-link handling that speeds up
- the code significantly. (J.W. Schultz and Wayne Davison)
-
- - The --hard-link option now uses the first existing file in the
- group of linked files as the basis for the transfer. This
- prevents the sub-optimal transfer of a file's data when a new
- hardlink is added on the sending side and it sorts alphabetically
- earlier in the list than the files that are already present on the
- receiving side.
-
- - Dropped support for protocol versions less than 20 (2.3.0 released
- 15 Mar 1999) and activated warnings for protocols less than 25
- (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
- severally)
-
- - More optimal data transmission for --hard-links (protocol 28).
-
- - More optimal data transmission for --checksum (protocol 28).
-
- - Less memory is used when --checksum is specified.
-
- - Less memory is used in the file list (a per-file savings).
-
- - The generator is now better about not modifying the file list
- during the transfer in order to avoid a copy-on-write memory
- bifurcation (on systems where fork() uses shared memory).
- Previously, rsync's shared memory would slowly become unshared,
- resulting in real memory usage nearly doubling on the receiving
- side by the end of the transfer. Now, as long as permissions
- are being preserved, the shared memory should remain that way
- for the entire transfer.
-
- - Changed hardlink info and file_struct + strings to use allocation
- pools. This reduces memory use for large file-sets and permits
- freeing memory to the OS. (J.W. Schultz)
-
- - The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe and
- the protocol improved so that (1) it is now impossible to have the
- "redo" pipe fill up and hang rsync, and (2) trailing messages from
- the receiver don't get lost on their way through the generator
- over to the sender (which mainly affected hard-link messages and
- verbose --stats output).
-
- - Improved the internal uid/gid code to be more portable and a
- little more optimized.
-
- - The device numbers sent when using --devices are now sent as
- separate major/minor values with 32-bit accuracy (protocol 28).
- Previously, the copied devices were sent as a single 32-bit
- number. This will make inter-operation of 64-bit binaries more
- compatible with their 32-bit brethren (with both ends of the
- connection are using protocol 28). Note that optimizations in the
- binary protocol for sending the device numbers often results in
- fewer bytes being used than before, even though more precision is
- now available.
-
- - Some cleanup of the exclude/include structures and its code made
- things clearer (internally), simpler, and more efficient.
-
- - The reading & writing of the file-list in batch-mode is now
- handled by the same code that sends & receives the list over the
- wire. This makes it much easier to maintain. (Note that the
- batch code is still considered to be experimental.)
-
- BUILD CHANGES:
-
- - The configure script now accepts --with-rsyncd-conf=PATH to
- override the default value of the /etc/rsyncd.conf file.
-
- - Fixed configure bug when running "./configure --disable-ipv6".
-
- - Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
-
- DEVELOPER RELATED:
+ - Added more conditional debug output.
- - Fixed "make test" bug when build dir is not the source dir.
+ - Really big numbers are now output using our own big-num routine rather
+ than casting them to a double and using a %.0f conversion.
- - Added a couple extra diffs in the "patches" dir, removed the ones
- that got applied, and rebuilt the rest.
+ - The pool_alloc library has received some minor improvements in alignment
+ handling.
+ - Added init_stat_x() function to avoid duplication of acl/xattr init code.