-NEWS for rsync 2.6.4 (UNRELEASED)
-Protocol: 29 (changed)
-Changes since 2.6.3:
+NEWS for rsync 2.6.7 (UNRELEASED)
+Protocol: 29 (unchanged)
+Changes since 2.6.6:
OUTPUT CHANGES:
- - When rsync deletes a directory and outputs a verbose message about
- it, it now appends a trailing slash to the name instead of (only
- sometimes) outputting a preceding "directory " string.
+ - The itemized output now uses 'S' for a special file instead of
+ clumping them together with the 'D' for devices. The number of
+ characters is also different (to remove an unused field).
- - The --stats output will contain file-list time-statistics if both
- sides are 2.6.4, or if the local side is 2.6.4 and the files are
- being pushed (since the stats come from the sending side).
-
BUG FIXES:
- - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
- was only treating it as a special token in an rsync include/exclude
- file).
+ - Fixed a really old bug that caused --checksum (-c) to checksum all the
+ files encountered during the delete scan (ouch).
- - The --dry-run option (-n) now mentions changes in directories (w/-v).
- It also now includes the normal uptodate output information for -vv.
+ - Made hard-links work with symlinks and devices again.
- - Avoid a mkdir warning when removing a directory in the destination
- that already exists in the --backup-dir.
+ - If a device-file/special-file changes permissions, rsync now updates the
+ permissions without recreating the file.
- - An OS that has a binary mode for its files (such as cygwin0 needed
- setmode(fd, O_BINARY) called on the temp-file we opened with
- mkstemp(). (Fix derived from the cygwin's rsync package.)
+ - If the user specifies a remote-host for both the source and destination,
+ we now output a syntax error rather than trying to open the destination
+ hostspec as a filename.
- - Fixed a potential hang when verbosity is high, the client side is
- the sender, and the file-list is large.
+ - When --inplace creates a new destination file, rsync now creates it with
+ permissions 0600 instead of 0000 -- this makes restarting possible when
+ the transfer gets interrupted in the middle of sending a new file.
- - We now check if the OS doesn't support using mknod() for creating
- FIFOs and sockets, and compile-in using mkfifo() and socket() when
- necessary.
+ - Reject the combination of --inplace and --sparse since the sparse-output
+ algorithm doesn't work when overwriting existing data.
- - Fixed an off-by-one error in the handling of --max-delete=N.
+ - Fixed the directory name in the error that is output when pop_dir()
+ fails.
- - One place in the code wasn't checking if fork() failed.
+ - Really fixed the parsing of a "!" entry in .cvsignore files this time.
- - The "ignore nonreadable" daemon parameter no longer affects symlinks
- that are being copied, even if they point nowhere.
+ - If the generator gets a stat() error on a file, output it (this used to
+ require at least -vv for the error to be seen).
- - If the OS does not have lchown() and its chown() tries to set the
- referent of a symlink (as it should), we no longer try to set the
- user and group of a symlink.
+ - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
+ the exit status properly and generate a better error.
- - The generator now properly runs the hard-link loop and the dir-time
- rewriting loop after we're sure that the redo phase is complete.
+ - Fixed some glitches in the double-verbose output when using --copy-dest,
+ --link-dest, or --compare-dest.
- - When --backup was specified with --partial-dir=DIR (where DIR is a
- relative path), the backup code was erroneously trying to backup a
- file that was put into the partial-dir.
+ - Fixed the matching of the dont-compress items (e.g. *.gz) against files
+ that have a path component containing a slash.
- - One call to flush_write_file() was not being checked for an error.
+ - If code reading a filter/exclude file an EINTR error, rsync now clears
+ the error flag on the file handle so it can keep on reading.
- - The --no-relative option was not being sent from the client to a
- server sender.
+ - If --relative is active, the sending side cleans up trailing "/" or "/."
+ suffixes to avoid triggering a bug in older rsync versions. Also, we now
+ reject a ".." dir if it would be sent as a relative dir.
- - If an rsync daemon specified "dont compress = ..." for a file and the
- client tried to specify --compress, the libz code was not handling a
- compression level of 0 properly. This could cause a transfer failure
- if the block-size for a file was large enough (i.e. rsync might have
- exited with an error for large files).
-
- - If a daemon can't open the specified log file (i.e. syslog is not
- being used), die without crashing. We also try to output an error
- about the failure (which will only be seen if --no-detach was
- specified).
+ - If a non-directory is in the way of a directory and rsync is run with
+ --dry-run and --delete, rsync no longer complains about not being
+ able to opendir() the not-yet present directory.
ENHANCEMENTS:
- - Rsync now supports popt's option aliases, which means that you can
- use /etc/popt and/or ~/.popt to create your own option aliases.
-
- - Added the --delete-during (--del) option which will delete files
- from on the receiving side incrementally as each directory in the
- transfer is being processed (which makes it more efficient than the
- default, before-the-transfer behavior of --delete). Note that the
- --del option is implemented as an internally-defined popt alias, so
- an rsync daemon that refuses "delete" (which, for safety's sake,
- really matches "delete*") will still refuse all delete options. The
- default behavior is also explicitly selectable via --delete-before.
-
- - Added the --copy-dest option, which works like --link-dest except
- that it includes copies of identical files.
-
- - Added support for specifying multiple --compare-dest, --copy-dest, or
- --link-dest options, but only of a single type. (Promoted from the
- patches dir and enhanced.)
-
- - Added the --max-size option. (Promoted from the patches dir.)
-
- - The daemon-mode options were separated from the normal rsync options
- so that they can't be mixed together. This makes it impossible to
- start a daemon that had improper default option values that could
- cause problems (such as a hang or an abort) when a client connects.
-
- - The --bwlimit option may now be used in combination with --daemon
- to specify both a default value for the daemon side and a value
- that cannot be exceeded by a user-specified --bwlimit option.
-
- - Added the "port" parameter to the rsyncd.conf file. (Promoted from
- the patches dir.) Also added "address".
-
- - In _exit_cleanup(): when we are exiting with a partially-received
- file, we now flush any data in the write-cache before closing the
- partial file.
-
- - The --inplace support was enhanced to work with --compare-dest,
- --link-dest, and (the new) --copy-dest options.
-
- - Added the --dirs (-d) option for an easier way to copy directories
- without recursion.
-
- - Added the --list-only option which is mainly a way for the client to
- put the server into listing mode without needing to resort to any
- option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a
- non-recursive listing). This option is used automatically when a
- modern rsync speaks to a modern daemon, but may also be specified
- manually if you want to force the use of the --list-only option over
- a remote-shell connection.
-
- - Added the --omit-dir-times (-O) option which will avoid updating the
- modified time for directories when --times was specified. This
- option will avoid an extra pass through the file-list at the end of
- the transfer (to tweak all the directory times), which can result in
- an appreciable speedup for a really large transfer.
-
- - Added the --filter (-f) option and its helper option, -F. Filter
- rules are an extension to the existing include/exclude handling
- that also supports nested filter files as well as per-directory
- filter files (like .cvsignore, but with full filter-rule parsing).
- This new option was chosen in order to ensure that all existing
- include/exclude processing remained 100% compatible with older
- versions.
-
- - Added the --delay-updates option that puts all updated files into
- a temporary directory (by default ".~tmp~", but settable via the
- --partial-dir=DIR option) until the end of the transfer. This
- makes the updates a little more atomic for a large transfer.
-
- - If rsync is put into the background, any output from --progress is
- reduced.
-
- - Documented the "max verbosity" setting for rsyncd.conf. (This
- setting was added a couple releases ago, but left undocumented.)
-
- SUPPORT FILES:
-
- - Added support/atomic-rsync -- a perl script that will transfer some
- files using rsync, and then move the updated files into place all at
- once at the end of the transfer. Only works when pulling, and uses
- --link-dest and a parallel hierarchy of files to effect its update.
-
- - Added support/mnt-excl that takes the /proc/mounts file and
- translates it into a set of excludes that will exclude all mount
- points (even mapped mounts to the same disk). The excludes are made
- relative to the specified source dir and properly anchored.
-
- - Added support/savetransfer.c -- a C program that can make a copy of
- all the data that flows over the wire. This lets you test for data
- corruption (by saving the data on both the sending side and the
- receiving side) or provides a way to help debug a protocol error.
-
- - Added support/rrsync -- my version of Joe Smith's restricted rsync
- perl script. This helps to ensure that only certain rsync commands
- can be run by an ssh invocation.
-
- - Improved the option descriptions in the --help text.
+ - Added the --specials option to tell rsync to copy special files (and does
+ not require root). The --devices option now affects just character and
+ block devices (which now matches the documentation). The -D option still
+ requests both --devices and --specials, and -a still implies -D.
+
+ - Added the --append option that makes rsync append data onto files
+ that are longer on the source than the destination (this includes new
+ files).
+
+ - Added the --min-size=SIZE option to exclude small files from the
+ transfer.
+
+ - Added the --compress-level option to allow you to set how aggressive
+ rsync's compression should be (this option implies --compress).
+
+ - Enhanced the parsing of the SIZE value for --min-size and --max-size
+ to allow easy entry of multiples of 1000 (instead of just multiples
+ of 1024) and off-by-one values too (e.g. --max-size=8mb-1).
+
+ - The options --human-readable (-h) and --si change the output of the
+ --stats and the end-of-run summary to be easier to read.
+
+ - If lutimes() and/or lchmod() are around, use them to allow the
+ preservation of attributes on symlinks.
+
+ - The --link-dest option now affects symlinks and devices (when
+ possible).
+
+ - Improved the output of hard-linked and copied files when using
+ --link-dest, --copy-dest, or --compare-dest.
+
+ - Added two config items to the rsyncd.conf parsing: "pre-xfer exec"
+ and "post-xfer exec". These allow a command to be specified on a
+ per-module basis that will be run before and/or after a daemon-mode
+ transfer. (See the manpage for a list of the environment variables
+ that are set with information about the transfer.)
+
+ - When using the --relative option, you can now insert a dot dir in
+ the source path to indicate where the replication of the source dirs
+ should start. For example, if you specify a source path of
+ rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
+ replicate the "baz/dir" part of the source path (note: a trailing
+ dot dir is unaffected unless it also has a trailing slash).
+
+ - Added some new --no-FOO options that make it easier to override
+ unwanted implied or default options. For example, "-a --no-o" (aka
+ "--archive --no-owner") can be used to turn off the preservation of
+ file ownership that is implied by -a.
+
+ - Added the --chmod=MODE option that allows the destination permissions
+ to be changed from the source permissions. E.g. --chmod=g+w,o-rwx
+
+ - Allow the --temp-dir option to be specified when starting a daemon,
+ which sets the default temporary directory for incoming files.
+
+ - If --delete is combined with --dirs without --recursive, rsync will
+ now delete in any directory whose content is being synchronized.
+
+ - If --backup is combined with --delete without --backup-dir (and
+ without --delete-excluded), we add a "protect" filter-rule to ensure
+ that files with the backup suffix are not deleted.
+
+ - The file-count stats that are output by --progress were improved to
+ better indicate what the numbers mean. For instance, the output:
+ "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
+ to be transferred, and we still need to check 8383 more files out of
+ a total of 9999.
+
+ - The include/exclude code now allows a dir/*** directive (with 3
+ trailing stars) to match both the dir itself as well as all the
+ content below the dir (dir/** would not match the dir).
+
+ - Added the --skip-empty-dirs (-k) option that makes the receiving
+ rsync discard empty chains of directories from the file-list. This
+ makes it much easier to scan a source hierarchy using include,
+ exclude, filter rules, and only end up with the directories needed
+ to hold the resulting files.
+
+ - If the --itemize-changes (-i) option is repeated, rsync now includes
+ unchanged files in the itemized output (similar to -vv, but without
+ all the other verbose messages that can get in the way). Of course,
+ the client must be version 2.6.7 for this to work, but the remote
+ rsync only needs to be 2.6.7 if you're pushing files.
+
+ - Added the --super option to make the receiver always attempt super-
+ user activities. This is useful for systems that allow things such
+ as devices to be created or ownership to be set without being UID 0,
+ and is also useful for someone who wants to ensure that errors will
+ be output if the receiving rsync isn't being run as root.
+
+ - Added the --sockopts option for those few who want to customize the
+ TCP options used to contact a daemon rsync.
+
+ - Some minor documentation improvements.
+
+ - Updated some diffs in the patches dir.
INTERNAL:
- - Added better checking of the checksum-header values that come over
- the socket.
+ - Some buffer sizes were expanded a bit, particularly on systems where
+ MAXPATHLEN is overly small (e.g. cygwin).
+
+ - If io_printf() tries to format more data than fits in the buffer, exit
+ with an error instead of transmitting a truncated buffer.
- - Merged the various delete-file functions into a single function so
- that it is easier to maintain.
+ - If a va_copy macro is defined, lib/snprintf.c will use it when defining
+ the VA_COPY macro.
- - Improved the type of some variables (particularly blocksize vars) for
- consistency and proper size.
+ - Reduced the amount of stack memory needed for each level of directory
+ recursion by nearly MAXPATHLEN bytes.
- - Got rid of the uint64 type (which we didn't need).
+ - The wildmatch function was extended to allow an array of strings to
+ be supplied as the string to match. This allows the exclude code to
+ do less string copying.
- - Use a slightly more compatible set of core #include directives.
+ - Got rid of the safe_fname() function (and all the myriad calls) and
+ replaced it with a new function in the log.c code that filters all
+ the output going to the terminal.
- - Defined int32 in a way that ensures that the build dies if we can't
- find a variable with at least 32 bits.
+ - Unified the f_name() and the f_name_to() functions.
- BUILD CHANGES:
+ DEVELOPER RELATED:
- - Handle an operating system that use mkdev() in place of makedev().
+ - Several diffs in the patches dir now use the proper --enable-FOO
+ configure option instead of --with-FOO to turn on the inclusion of
+ the newly patched feature.
- - Improved configure to better handle cross-compiling.
+ - The testsuite now sets HOME so that it won't be affecting by a file
+ such as ~/.popt.