mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(28 Jul 2005)()()
+manpage(rsync)(1)(22 Apr 2006)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST
+rsync [OPTION]... SRC
+
rsync [OPTION]... [USER@]HOST:SRC [DEST]
rsync [OPTION]... [USER@]HOST::SRC [DEST]
"USING RSYNC-DAEMON FEATURES VIA A REMOTE-SHELL CONNECTION" section for
an exception to this latter rule).
-As a special case, if a remote source is specified without a destination,
-the remote files are listed in an output format similar to "ls -l".
+As a special case, if a single source arg is specified without a
+destination, the files are listed in an output format similar to "ls -l".
As expected, if neither the source or destination path specify a remote
host, the copy occurs locally (see also the bf(--list-only) option).
If you need to specify a different remote-shell user, keep in mind that the
user@ prefix in front of the host is specifying the rsync-user value (for a
module that requires user-based authentication). This means that you must
-give the '-l user' option to ssh when specifying the remote-shell:
+give the '-l user' option to ssh when specifying the remote-shell, as in
+this example that uses the short version of the bf(--rsh) option:
verb( rsync -av -e "ssh -l ssh-user" rsync-user@host::module /dest)
daemon already running (or it needs to have configured something like inetd
to spawn an rsync daemon for incoming connections on a particular port).
For full information on how to start a daemon that will handling incoming
-socket connections, see the rsyncd.conf(5) man page -- that is the config
+socket connections, see the bf(rsyncd.conf)(5) man page -- that is the config
file for the daemon, and it contains the full details for how to run the
daemon (including stand-alone and inetd configurations).
-L, --copy-links transform symlink into referent file/dir
--copy-unsafe-links only "unsafe" symlinks are transformed
--safe-links ignore symlinks that point outside the tree
- -H, --hard-links preserve hard links
+ -k, --copy-dirlinks transform symlink to dir into referent dir
-K, --keep-dirlinks treat symlinked dir on receiver as dir
+ -H, --hard-links preserve hard links
-p, --perms preserve permissions
+ -E, --executability preserve executability
+ --chmod=CHMOD change destination permissions
-o, --owner preserve owner (super-user only)
-g, --group preserve group
--devices preserve device files (super-user only)
-t, --times preserve times
-O, --omit-dir-times omit directories when preserving times
--super receiver attempts super-user activities
- --chmod=CHMOD change destination permissions
-S, --sparse handle sparse files efficiently
-n, --dry-run show what would have been transferred
-W, --whole-file copy files whole (without rsync algorithm)
-B, --block-size=SIZE force a fixed checksum block-size
-e, --rsh=COMMAND specify the remote shell to use
--rsync-path=PROGRAM specify the rsync to run on remote machine
- --existing ignore non-existing files on receiving side
- --ignore-existing ignore files that already exist on receiver
- --remove-sent-files sent files/symlinks are removed from sender
+ --existing skip creating new files on receiver
+ --ignore-existing skip updating files that exist on receiver
+ --remove-sent-files sender removes successfully sent files
--del an alias for --delete-during
- --delete delete files that don't exist on sender
+ --delete delete extraneous files from dest dirs
--delete-before receiver deletes before transfer (default)
--delete-during receiver deletes during xfer, not before
--delete-after receiver deletes after transfer, not before
- --delete-excluded also delete excluded files on receiver
+ --delete-excluded also delete excluded files from dest dirs
--ignore-errors delete even if there are I/O errors
--force force deletion of dirs even if not empty
--max-delete=NUM don't delete more than NUM files
--sockopts=OPTIONS specify custom TCP options
--blocking-io use blocking I/O for the remote shell
--stats give some file-transfer stats
+ -8, --8-bit-output leave high-bit chars unescaped in output
-h, --human-readable output numbers in a human-readable format
- --si like human-readable, but use powers of 1000
--progress show progress during transfer
-P same as --partial --progress
-i, --itemize-changes output a change-summary for all updates
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
--version print version number
- --help show this help screen)
+(-h) --help show this help (see below for -h comment)
+)
Rsync can also be run as a daemon, in which case the following options are
accepted: verb(
-v, --verbose increase verbosity
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
- --help show this help screen)
+ -h, --help show this help (if used after --daemon)
+)
manpageoptions()
startdit()
dit(bf(--help)) Print a short help page describing the options
available in rsync and exit. For backward-compatibility with older
-versions of rsync, the same help output can also be requested by using
-the bf(-h) option without any other args.
+versions of rsync, the help will also be output if you use the bf(-h)
+option without any other args.
dit(bf(--version)) print the rsync version number and exit.
times with a 2-second resolution), bf(--modify-window=1) is useful
(allowing times to differ by up to 1 second).
-dit(bf(-c, --checksum)) This forces the sender to checksum all files using
-a 128-bit MD4 checksum before transfer. The checksum is then
-explicitly checked on the receiver and any files of the same name
-which already exist and have the same checksum and size on the
-receiver are not transferred. This option can be quite slow.
+dit(bf(-c, --checksum)) This forces the sender to checksum em(every)
+regular file using a 128-bit MD4 checksum. It does this during the initial
+file-system scan as it builds the list of all available files. The receiver
+then checksums its version of each file (if it exists and it has the same
+size as its sender-side counterpart) in order to decide which files need to
+be updated: files with either a changed size or a changed checksum are
+selected for transfer. Since this whole-file checksumming of all files on
+both sides of the connection occurs in addition to the automatic checksum
+verifications that occur during a file's transfer, this option can be quite
+slow.
+
+Note that rsync always verifies that each em(transferred) file was correctly
+reconstructed on the receiving side by checking its whole-file checksum, but
+that automatic after-the-transfer verification has nothing to do with this
+option's before-the-transfer "Does this file need to be updated?" check.
dit(bf(-a, --archive)) This is equivalent to bf(-rlptgoD). It is a quick
way of saying you want recursion and want to preserve almost
The order of the options is important: if you specify bf(--no-r -a), the
bf(-r) option would end up being turned on, the opposite of bf(-a --no-r).
Note also that the side-effects of the bf(--files-from) option are NOT
-positional, as it affects the default state of several options and sligntly
+positional, as it affects the default state of several options and slightly
changes the meaning of bf(-a) (see the bf(--files-from) option for more
details).
quote(tt( rsync -av /foo/bar/baz.c remote:/tmp/))
-... this would create a file called baz.c in /tmp/ on the remote
+... this would create a file named baz.c in /tmp/ on the remote
machine. If instead you used
quote(tt( rsync -avR /foo/bar/baz.c remote:/tmp/))
-then a file called /tmp/foo/bar/baz.c would be created on the remote
+then a file named /tmp/foo/bar/baz.c would be created on the remote
machine -- the full path name is preserved. To limit the amount of
path information that is sent, you have a couple options: (1) With
a modern rsync on the sending side (beginning with 2.6.7), you can
-insert a dot dir into the source path, like this:
+insert a dot and a slash into the source path, like this:
quote(tt( rsync -avR /foo/./bar/baz.c remote:/tmp/))
That would create /tmp/bar/baz.c on the remote machine. (Note that the
-dot dir must followed by a slash, so "/foo/." would not be abbreviated.)
+dot must be followed by a slash, so "/foo/." would not be abbreviated.)
(2) For older rsync versions, you would need to use a chdir to limit the
source path. For example, when pushing files:
tt( remote:bar/baz.c /tmp/)
)
-dit(bf(--no-implied-dirs)) When combined with the bf(--relative) option, the
-implied directories in each path are not explicitly duplicated as part
-of the transfer. This makes the transfer more optimal and also allows
-the two sides to have non-matching symlinks in the implied part of the
-path. For instance, if you transfer the file "/path/foo/file" with bf(-R),
-the default is for rsync to ensure that "/path" and "/path/foo" on the
-destination exactly match the directories/symlinks of the source. Using
-the bf(--no-implied-dirs) option would omit both of these implied dirs,
-which means that if "/path" was a real directory on one machine and a
-symlink of the other machine, rsync would not try to change this.
+dit(bf(--no-implied-dirs)) This option affects the default behavior of the
+bf(--relative) option. When it is specified, the attributes of the implied
+directories from the source names are not included in the transfer. This
+means that the corresponding path elements on the destination system are
+left unchanged if they exist, and any missing implied directories are
+created with default attributes. This even allows these implied path
+elements to have big differences, such as being a symlink to a directory on
+one side of the transfer, and a real directory on the other side.
+
+For instance, if a command-line arg or a files-from entry told rsync to
+transfer the file "path/foo/file", the directories "path" and "path/foo"
+are implied when bf(--relative) is used. If "path/foo" is a symlink to
+"bar" on the destination system, the receiving rsync would ordinarily
+delete "path/foo", recreate it as a directory, and receive the file into
+the new directory. With bf(--no-implied-dirs), the receiving rsync updates
+"path/foo/file" using the existing path elements, which means that the file
+ends up being created in "path/bar". Another way to accomplish this link
+preservation is to use the bf(--keep-dirlinks) option (which will also
+affect symlinks to directories in the rest of the transfer).
+
+In a similar but opposite scenario, if the transfer of "path/foo/file" is
+requested and "path/foo" is a symlink on the sending side, running without
+bf(--no-implied-dirs) would cause rsync to transform "path/foo" on the
+receiving side into an identical symlink, and then attempt to transfer
+"path/foo/file", which might fail if the duplicated symlink did not point
+to a directory on the receiving side. Another way to avoid this sending of
+a symlink as an implied directory is to use bf(--copy-unsafe-links), or
+bf(--copy-dirlinks) (both of which also affect symlinks in the rest of the
+transfer -- see their descriptions for full details).
dit(bf(-b, --backup)) With this option, preexisting destination files are
renamed as each file is transferred or deleted. You can control where the
Note that if you don't specify bf(--backup-dir), (1) the
bf(--omit-dir-times) option will be implied, and (2) if bf(--delete) is
-also in effect (without bf(--delete-excluded)), rsync will add a protect
+also in effect (without bf(--delete-excluded)), rsync will add a "protect"
filter-rule for the backup suffix to the end of all your existing excludes
(e.g. -f "P *~"). This will prevent previously backed-up files from being
deleted. Note that if you are supplying your own filter rules, you may
dit(bf(-l, --links)) When symlinks are encountered, recreate the
symlink on the destination.
-dit(bf(-L, --copy-links)) When symlinks are encountered, the file that
+dit(bf(-L, --copy-links)) When symlinks are encountered, the item that
they point to (the referent) is copied, rather than the symlink. In older
versions of rsync, this option also had the side-effect of telling the
receiving side to follow symlinks, such as symlinks to directories. In a
dit(bf(--copy-unsafe-links)) This tells rsync to copy the referent of
symbolic links that point outside the copied tree. Absolute symlinks
are also treated like ordinary files, and so are any symlinks in the
-source path itself when bf(--relative) is used.
+source path itself when bf(--relative) is used. This option has no
+additional effect if bf(--copy-links) was also specified.
dit(bf(--safe-links)) This tells rsync to ignore any symbolic links
which point outside the copied tree. All absolute symlinks are
also ignored. Using this option in conjunction with bf(--relative) may
give unexpected results.
-dit(bf(-H, --hard-links)) This tells rsync to recreate hard links on
-the remote system to be the same as the local system. Without this
-option hard links are treated like regular files.
+dit(bf(-K, --copy-dirlinks)) This option causes the sending side to treat
+a symlink to a directory as though it were a real directory. This is
+useful if you don't want symlinks to non-directories to be affected, as
+they would be using bf(--copy-links).
+
+Without this option, if the sending side has replaced a directory with a
+symlink to a directory, the receiving side will delete anything that is in
+the way of the new symlink, including a directory hierarchy (as long as
+bf(--force) or bf(--delete) is in effect).
+
+See also bf(--keep-dirlinks) for an analogous option for the receiving
+side.
+
+dit(bf(-K, --keep-dirlinks)) This option causes the receiving side to treat
+a symlink to a directory as though it were a real directory, but only if it
+matches a real directory from the sender. Without this option, the
+receiver's symlink would be deleted and replaced with a real directory.
+
+For example, suppose you transfer a directory "foo" that contains a file
+"file", but "foo" is a symlink to directory "bar" on the receiver. Without
+bf(--keep-dirlinks), the receiver deletes symlink "foo", recreates it as a
+directory, and receives the file into the new directory. With
+bf(--keep-dirlinks), the receiver keeps the symlink and "file" ends up in
+"bar".
+
+See also bf(--copy-dirlinks) for an analogous option for the sending side.
+
+dit(bf(-H, --hard-links)) This tells rsync to look for hard-linked files in
+the transfer and link together the corresponding files on the receiving
+side. Without this option, hard-linked files in the transfer are treated
+as though they were separate files.
Note that rsync can only detect hard links if both parts of the link
are in the list of files being sent.
-This option can be quite slow, so only use it if you need it.
+dit(bf(-p, --perms)) This option causes the receiving rsync to set the
+destination permissions to be the same as the source permissions. (See
+also the bf(--chmod) option for a way to modify what rsync considers to
+be the source permissions.)
-dit(bf(-K, --keep-dirlinks)) On the receiving side, if a symlink is
-pointing to a directory, it will be treated as matching a directory
-from the sender.
+When this option is em(off), permissions are set as follows:
-dit(bf(-W, --whole-file)) With this option the incremental rsync algorithm
-is not used and the whole file is sent as-is instead. The transfer may be
-faster if this option is used when the bandwidth between the source and
-destination machines is higher than the bandwidth to disk (especially when the
-"disk" is actually a networked filesystem). This is the default when both
-the source and destination are specified as local paths.
+quote(itemize(
+ it() Existing files (including updated files) retain their existing
+ permissions, though the bf(--executability) option might change just
+ the execute permission for the file.
+ it() New files get their "normal" permission bits set to the source
+ file's permissions masked with the receiving end's umask setting, and
+ their special permission bits disabled except in the case where a new
+ directory inherits a setgid bit from its parent directory.
+))
+
+Thus, when bf(--perms) and bf(--executability) are both disabled,
+rsync's behavior is the same as that of other file-copy utilities,
+such as bf(cp)(1) and bf(tar)(1).
+
+In summary: to give destination files (both old and new) the source
+permissions, use bf(--perms). To give new files the destination-default
+permissions (while leaving existing files unchanged), make sure that the
+bf(--perms) option is off and use bf(--chmod=ugo=rwX) (which ensures that
+all non-masked bits get enabled). If you'd care to make this latter
+behavior easier to type, you could define a popt alias for it, such as
+putting this line in the file ~/.popt (this defines the bf(-s) option,
+and includes --no-g to use the default group of the destination dir):
+
+quote(tt( rsync alias -s --no-p --no-g --chmod=ugo=rwX))
+
+You could then use this new option in a command such as this one:
+
+quote(tt( rsync -asv src/ dest/))
+
+(Caveat: make sure that bf(-a) does not follow bf(-s), or it will re-enable
+the "--no-*" options.)
+
+The preservation of the destination's setgid bit on newly-created
+directories when bf(--perms) is off was added in rsync 2.6.7. Older rsync
+versions erroneously preserved the three special permission bits for
+newly-created files when bf(--perms) was off, while overriding the
+destination's setgid bit setting on a newly-created directory. (Keep in
+mind that it is the version of the receiving rsync that affects this
+behavior.)
+
+dit(bf(-E, --executability)) This option causes rsync to preserve the
+executability (or non-executability) of regular files when bf(--perms) is
+not enabled. A regular file is considered to be executable if at least one
+'x' is turned on in its permissions. When an existing destination file's
+executability differs from that of the corresponding source file, rsync
+modifies the destination file's permissions as follows:
+
+quote(itemize(
+ it() To make a file non-executable, rsync turns off all its 'x'
+ permissions.
+ it() To make a file executable, rsync turns on each 'x' permission that
+ has a corresponding 'r' permission enabled.
+))
+
+If bf(--perms) is enabled, this option is ignored.
-dit(bf(-p, --perms)) This option causes rsync to set the destination
-permissions to be the same as the source permissions.
+dit(bf(--chmod)) This option tells rsync to apply one or more
+comma-separated "chmod" strings to the permission of the files in the
+transfer. The resulting value is treated as though it was the permissions
+that the sending side supplied for the file, which means that this option
+can seem to have no effect on existing files if bf(--perms) is not enabled.
-Without this option, all existing files (including updated files) retain
-their existing permissions, while each new file gets its permissions set
-based on the source file's permissions, but masked by the receiving end's
-umask setting
-(which is the same behavior as other file-copy utilities, such as cp).
+In addition to the normal parsing rules specified in the bf(chmod)(1)
+manpage, you can specify an item that should only apply to a directory by
+prefixing it with a 'D', or specify an item that should only apply to a
+file by prefixing it with a 'F'. For example:
+
+quote(--chmod=Dg+s,ug+w,Fo-w,+X)
+
+It is also legal to specify multiple bf(--chmod) options, as each
+additional option is just appended to the list of changes to make.
+
+See the bf(--perms) and bf(--executability) options for how the resulting
+permission value can be applied to the files in the transfer.
dit(bf(-o, --owner)) This option causes rsync to set the owner of the
-destination file to be the same as the source file. By default, the
-preservation is done by name, but may fall back to using the ID number
-in some circumstances (see the bf(--numeric-ids) option for a full
-discussion).
-This option has no effect if the receiving rsync is not run as the
-super-user and bf(--super) is not specified.
+destination file to be the same as the source file, but only if the
+receiving rsync is being run as the super-user (see also the bf(--super)
+option to force rsync to attempt super-user activities).
+Without this option, the owner is set to the invoking user on the
+receiving side.
+
+The preservation of ownership will associate matching names by default, but
+may fall back to using the ID number in some circumstances (see also the
+bf(--numeric-ids) option for a full discussion).
dit(bf(-g, --group)) This option causes rsync to set the group of the
destination file to be the same as the source file. If the receiving
-program is not running as the super-user (or with the bf(--no-super)
-option), only groups that the
-receiver is a member of will be preserved. By default, the preservation
-is done by name, but may fall back to using the ID number in some
-circumstances. See the bf(--numeric-ids) option for a full discussion.
+program is not running as the super-user (or if bf(--no-super) was
+specified), only groups that the invoking user on the receiving side
+is a member of will be preserved.
+Without this option, the group is set to the default group of the invoking
+user on the receiving side.
+
+The preservation of group information will associate matching names by
+default, but may fall back to using the ID number in some circumstances
+(see also the bf(--numeric-ids) option for a full discussion).
dit(bf(--devices)) This option causes rsync to transfer character and
block device files to the remote system to recreate these devices.
being running as the super-user. To turn off super-user activities, the
super-user can use bf(--no-super).
-dit(bf(--chmod)) This option tells rsync to apply the listed "chmod" pattern
-to the permission of the files on the destination. In addition to the normal
-parsing rules specified in the chmod manpage, you can specify an item that
-should only apply to a directory by prefixing it with a 'D', or specify an
-item that should only apply to a file by prefixing it with a 'F'. For example:
-
-quote(--chmod=Dg+s,ug+w,Fo-w,+X)
-
-It is also legal to specify multiple bf(--chmod) options.
-
-dit(bf(-n, --dry-run)) This tells rsync to not do any file transfers,
-instead it will just report the actions it would have taken.
-
dit(bf(-S, --sparse)) Try to handle sparse files efficiently so they take
up less space on the destination. Conflicts with bf(--inplace) because it's
not possible to overwrite data in a sparse fashion.
filesystem. It doesn't seem to handle seeks over null regions
correctly and ends up corrupting the files.
+dit(bf(-n, --dry-run)) This tells rsync to not do any file transfers,
+instead it will just report the actions it would have taken.
+
+dit(bf(-W, --whole-file)) With this option the incremental rsync algorithm
+is not used and the whole file is sent as-is instead. The transfer may be
+faster if this option is used when the bandwidth between the source and
+destination machines is higher than the bandwidth to disk (especially when the
+"disk" is actually a networked filesystem). This is the default when both
+the source and destination are specified as local paths.
+
dit(bf(-x, --one-file-system)) This tells rsync to avoid crossing a
filesystem boundary when recursing. This does not limit the user's ability
to specify items to copy from multiple filesystems, just rsync's recursion
through the hierarchy of each directory that the user specified, and also
the analogous recursion on the receiving side during deletion. Also keep
in mind that rsync treats a "bind" mount to the same device as being on the
-same filesystem.
+same filesystem.
If this option is repeated, rsync omits all mount-point directories from
the copy. Otherwise, it includes an empty directory at each mount-point it
by this option.
dit(bf(--existing, --ignore-non-existing)) This tells rsync to skip
-updating files that do not exist yet on the destination. If this option is
+creating files (i.e. non-directory items) that do not exist yet on the
+destination. If this option is
combined with the bf(--ignore-existing) option, no files will be updated
(which can be useful if all you want to do is to delete missing files).
-dit(bf(--ignore-existing)) This tells rsync to skip updating files that
-already exist on the destination. See also bf(--ignore-non-existing).
+dit(bf(--ignore-existing)) This tells rsync to skip updating files (i.e.
+non-directory items) that
+already exist on the destination. See also bf(--existing).
dit(bf(--remove-sent-files)) This tells rsync to remove from the sending
side the files and/or symlinks that are newly created or whose content is
dit(bf(--ignore-errors)) Tells bf(--delete) to go ahead and delete files
even when there are I/O errors.
-dit(bf(--force)) This option tells rsync to delete directories even if
-they are not empty when they are to be replaced by non-directories. This
-is only relevant without bf(--delete) because deletions are now done depth-first.
-Requires the bf(--recursive) option (which is implied by bf(-a)) to have any effect.
+dit(bf(--force)) This option tells rsync to delete a non-empty directory
+when it is to be replaced by a non-directory. This is only relevant if
+deletions are not active (see bf(--delete) for details).
+
+Note for older rsync versions: bf(--force) used to still be required when
+using bf(--delete-after), and it used to be non-functional unless the
+bf(--recursive) option was also enabled.
dit(bf(--max-delete=NUM)) This tells rsync not to delete more than NUM
files or directories (NUM must be non-zero).
Finally, any file is ignored if it is in the same directory as a
.cvsignore file and matches one of the patterns listed therein. Unlike
rsync's filter/exclude files, these patterns are split on whitespace.
-See the bf(cvs(1)) manual for more information.
+See the bf(cvs)(1) manual for more information.
If you're combining bf(-C) with your own bf(--filter) rules, you should
note that these CVS excludes are appended at the end of your own rules,
file are split on whitespace).
dit(bf(-T, --temp-dir=DIR)) This option instructs rsync to use DIR as a
-scratch directory when creating temporary copies of the files
-transferred on the receiving side. The default behavior is to create
-the temporary files in the receiving directory.
+scratch directory when creating temporary copies of the files transferred
+on the receiving side. The default behavior is to create each temporary
+file in the same directory as the associated destination file.
This option is most often used when the receiving disk partition does not
have enough free space to hold a copy of the largest file in the transfer.
over the top of the associated destination file, but instead must copy it
into place. Rsync does this by copying the file over the top of the
destination file, which means that the destination file will contain
-truncated data during this copy. If this were not done this way -- for
-instance, if the destination file were first removed, a copy made to a
-temp-file in the destination dir, and that file renamed over the top of the
-destination file -- the old file could still be taking up disk space (if
-someone had it open), and thus the copy could fail due to lack of space.
+truncated data during this copy. If this were not done this way (even if
+the destination file were first removed, the data locally copied to a
+temporary file in the destination directory, and then renamed into place)
+it would be possible for the old file to continue taking up disk space (if
+someone had it open), and thus there might not be enough room to fit the
+new version on the disk at the same time.
If you are using this option for reasons other than a shortage of disk
space, you may wish to combine it with the bf(--delay-updates) option,
-which will ensure that all copied files go into a subdirectory of the
-destination dir, awaiting the end of the transfer.
+which will ensure that all copied files get put into subdirectories in the
+destination hierarchy, awaiting the end of the transfer. If you don't
+have enough room to duplicate all the arriving files on the destination
+partition, another way to tell rsync that you aren't overly concerned
+about disk space is to use the bf(--partial-dir) option with a relative
+path; because this tells rsync that it is OK to stash off a copy of a
+single file in a subdir in the destination hierarchy, rsync will use the
+partial-dir as a staging area to bring over the copied file, and then
+rename it into place from there. (Specifying a bf(--partial-dir) with
+an absolute path does not have this side-effect.)
dit(bf(-y, --fuzzy)) This option tells rsync that it should look for a
basis file for any destination file that is missing. The current algorithm
as it is sent to the destination machine, which reduces the amount of data
being transmitted -- something that is useful over a slow connection.
-Note this this option typically achieves better compression ratios that can
+Note that this option typically achieves better compression ratios than can
be achieved by using a compressing remote shell or a compressing transport
because it takes advantage of the implicit information in the matching data
blocks that are not explicitly sent over the connection.
dit(bf(--sockopts)) This option can provide endless fun for people
who like to tune their systems to the utmost degree. You can set all
sorts of socket options which may make transfers faster (or
-slower!). Read the man page for the setsockopt() system call for
+slower!). Read the man page for the code(setsockopt()) system call for
details on some of the options you may be able to set. By default no
special socket options are set. This only affects direct socket
connections to a remote rsync daemon. This option also exists in the
verbose messages).
The "%i" escape has a cryptic output that is 9 letters long. The general
-format is like the string bf(UXcstpog)), where bf(U) is replaced by the
-kind of update being done, bf(X) is replaced by the file-type, and the
+format is like the string bf(YXcstpogz), where bf(Y) is replaced by the
+type of update being done, bf(X) is replaced by the file-type, and the
other letters represent attributes that may be output if they are being
modified.
-The update types that replace the bf(U) are as follows:
+The update types that replace the bf(Y) are as follows:
quote(itemize(
it() A bf(<) means that a file is being transferred to the remote host
(received).
it() A bf(c) means that a local change/creation is occurring for the item
(such as the creation of a directory or the changing of a symlink, etc.).
- it() A bf(h) means that the item is a hard-link to another item (requires
+ it() A bf(h) means that the item is a hard link to another item (requires
bf(--hard-links)).
it() A bf(.) means that the item is not being updated (though it might
have attributes that are being modified).
sender's value (requires bf(--owner) and super-user privileges).
it() A bf(g) means the group is different and is being updated to the
sender's value (requires bf(--group) and the authority to set the group).
+ it() The bf(z) slot is reserved for future use.
))
One other output is possible: when deleting files, the "%i" will output
Specifying this option will mention each file, dir, etc. that gets updated
in a significant way (a transferred file, a recreated symlink/device, or a
-touched directory) unless the itemized-changes escape (%i) is included in
+touched directory) unless the itemize-changes escape (%i) is included in
the string, in which case the logging of names increases to mention any
item that is changed in any way (as long as the receiving side is at least
2.6.4). See the bf(--itemize-changes) option for a description of the
output of "%i".
The bf(--verbose) option implies a format of "%n%L", but you can use
-bf(--log-format) without bv(--verbose) if you like, or you can override
+bf(--log-format) without bf(--verbose) if you like, or you can override
the format of its per-file output using this option.
Rsync will output the log-format string prior to a file's transfer unless
on the file transfer, allowing you to tell how effective the rsync
algorithm is for your data.
-dit(bf(-h, --human-readable)) Output numbers in a more human-readable format.
-Large numbers may be output in larger units, with a K (1024), M (1024*1024),
-or G (1024*1024*1024) suffix.
+The current statistics are as follows: quote(itemize(
+ it() bf(Number of files) is the count of all "files" (in the generic
+ sense), which includes directories, symlinks, etc.
+ it() bf(Number of files transferred) is the count of normal files that
+ were updated via the rsync algorithm, which does not include created
+ dirs, symlinks, etc.
+ it() bf(Total file size) is the total sum of all file sizes in the transfer.
+ This does not count any size for directories or special files, but does
+ include the size of symlinks.
+ it() bf(Total transferred file size) is the total sum of all files sizes
+ for just the transferred files.
+ it() bf(Literal data) is how much unmatched file-update data we had to
+ send to the receiver for it to recreate the updated files.
+ it() bf(Matched data) is how much data the receiver got locally when
+ recreating the updated files.
+ it() bf(File list size) is how big the file-list data was when the sender
+ sent it to the receiver. This is smaller than the in-memory size for the
+ file list due to some compressing of duplicated data when rsync sends the
+ list.
+ it() bf(File list generation time) is the number of seconds that the
+ sender spent creating the file list. This requires a modern rsync on the
+ sending side for this to be present.
+ it() bf(File list transfer time) is the number of seconds that the sender
+ spent sending the file list to the receiver.
+ it() bf(Total bytes sent) is the count of all the bytes that rsync sent
+ from the client side to the server side.
+ it() bf(Total bytes received) is the count of all non-message bytes that
+ rsync received by the client side from the server side. "Non-message"
+ bytes means that we don't count the bytes for a verbose message that the
+ server sent to us, which makes the stats more consistent.
+))
-dit(bf(--si)) Similar to the bf(--human-readable) option, but using powers
-of 1000 instead of 1024.
+dit(bf(-8, --8-bit-output)) This tells rsync to leave all high-bit characters
+unescaped in the output instead of trying to test them to see if they're
+valid in the current locale and escaping the invalid ones. All control
+characters (but never tabs) are always escaped, regardless of this option's
+setting.
+
+The escape idiom that started in 2.6.7 is to output a literal backslash (\)
+and a hash (#), followed by exactly 3 octal digits. For example, a newline
+would output as "\#012". A literal backslash that is in a filename is not
+escaped unless it is followed by a hash and 3 digits (0-9).
+
+dit(bf(-h, --human-readable)) Output numbers in a more human-readable format.
+This makes big numbers output using larger units, with a K, M, or G suffix. If
+this option was specified once, these units are K (1000), M (1000*1000), and
+G (1000*1000*1000); if the option is repeated, the units are powers of 1024
+instead of 1000.
dit(bf(--partial)) By default, rsync will delete any partially
transferred file if the transfer is interrupted. In some circumstances
partial-directory in the destination file's directory when needed, and then
remove it again when the partial file is deleted.
-If the partial-dir value is not an absolute path, rsync will also add a directory
-bf(--exclude) of this value at the end of all your existing excludes. This
-will prevent partial-dir files from being transferred and also prevent the
-untimely deletion of partial-dir items on the receiving side. An example:
-the above bf(--partial-dir) option would add an "bf(--exclude=.rsync-partial/)"
-rule at the end of any other filter rules. Note that if you are
-supplying your own exclude rules, you may need to manually insert your own
-exclude/protect rule somewhere higher up in the list so that
-it has a high enough priority to be effective (e.g., if your rules specify
-a trailing inclusion/exclusion of '*', the auto-added rule would never be
-reached).
+If the partial-dir value is not an absolute path, rsync will add an exclude
+rule at the end of all your existing excludes. This will prevent the
+sending of any partial-dir files that may exist on the sending side, and
+will also prevent the untimely deletion of partial-dir items on the
+receiving side. An example: the above bf(--partial-dir) option would add
+the equivalent of "bf(--exclude=.rsync-partial/)" at the end of any other
+filter rules.
+
+If you are supplying your own exclude rules, you may need to add your own
+exclude/hide/protect rule for the partial-dir because (1) the auto-added
+rule may be ineffective at the end of your other rules, or (2) you may wish
+to override rsync's exclude choice. For instance, if you want to make
+rsync clean-up any left-over partial-dirs that may be lying around, you
+should specify bf(--delete-after) and add a "risk" filter rule, e.g.
+bf(-f 'R .rsync-partial/'). (Avoid using bf(--delete-before) or
+bf(--delete-during) unless you don't need rsync to use any of the
+left-over partial-dir data during the current run.)
IMPORTANT: the bf(--partial-dir) should not be writable by other users or it
is a security risk. E.g. AVOID "/tmp".
You can also set the partial-dir value the RSYNC_PARTIAL_DIR environment
variable. Setting this in the environment does not force bf(--partial) to be
-enabled, but rather it effects where partial files go when bf(--partial) is
+enabled, but rather it affects where partial files go when bf(--partial) is
specified. For instance, instead of using bf(--partial-dir=.rsync-tmp)
along with bf(--progress), you could set RSYNC_PARTIAL_DIR=.rsync-tmp in your
environment and then just use the bf(-P) option to turn on the use of the
succession. This attempts to make the updating of the files a little more
atomic. By default the files are placed into a directory named ".~tmp~" in
each file's destination directory, but if you've specified the
-bf(--partial-dir) option, that directory will be used instead.
+bf(--partial-dir) option, that directory will be used instead. See the
+comments in the bf(--partial-dir) section for a discussion of how this
+".~tmp~" dir will be excluded from the transfer, and what you can do if
+you wnat rsync to cleanup old ".~tmp~" dirs that might be lying around.
Conflicts with bf(--inplace) and bf(--append).
This option uses more memory on the receiving side (one bit per file
that any superfluous files and directories in the destination are removed
(note the hide filter of non-directories being used instead of an exclude):
-quote( rsync -avm --del --include='*.pdf' -f 'hide! */' src/ dest)
+quote( rsync -avm --del --include='*.pdf' -f 'hide,! */' src/ dest)
If you didn't want to remove superfluous destination files, the more
time-honored options of "--include='*/' --exclude='*'" would work fine
single line.
dit(bf(--list-only)) This option will cause the source files to be listed
-instead of transferred. This option is inferred if there is no destination
-specified, so you don't usually need to use it explicitly. However, it can
-come in handy for a user that wants to avoid the "bf(-r --exclude='/*/*')"
-options that rsync might use as a compatibility kluge when generating a
-non-recursive listing, or to list the files that are involved in a local
-copy (since the destination path is not optional for a local copy, you
-must specify this option explicitly and still include a destination).
+instead of transferred. This option is inferred if there is a single source
+arg and no destination specified, so its main uses are: (1) to turn a copy
+command that includes a
+destination arg into a file-listing command, (2) to be able to specify more
+than one local source arg (note: be sure to include the destination), or
+(3) to avoid the automatically added "bf(-r --exclude='/*/*')" options that
+rsync usually uses as a compatibility kluge when generating a non-recursive
+listing. Caution: keep in mind that a source arg with a wild-card is expanded
+by the shell into multiple args, so it is never safe to try to list such an arg
+without using this option. For example:
+
+verb( rsync -av --list-only foo* dest/)
dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum
transfer rate in kilobytes per second. This option is most effective when
dit(bf(--checksum-seed=NUM)) Set the MD4 checksum seed to the integer
NUM. This 4 byte checksum seed is included in each block and file
MD4 checksum calculation. By default the checksum seed is generated
-by the server and defaults to the current time(). This option
+by the server and defaults to the current code(time()). This option
is used to set a specific checksum seed, which is useful for
applications that want repeatable block and file checksums, or
in the case where the user wants a more random checksum seed.
-Note that setting NUM to 0 causes rsync to use the default of time()
+Note that setting NUM to 0 causes rsync to use the default of code(time())
for checksum seed.
enddit()
run via inetd, otherwise it will detach from the current terminal and
become a background daemon. The daemon will read the config file
(rsyncd.conf) on each connect made by a client and respond to
-requests accordingly. See the rsyncd.conf(5) man page for more
+requests accordingly. See the bf(rsyncd.conf)(5) man page for more
details.
dit(bf(--address)) By default rsync will bind to the wildcard address when
particular spot in the hierarchy of files, otherwise it is matched
against the end of the pathname. This is similar to a leading ^ in
regular expressions.
- Thus "/foo" would match a file called "foo" at either the "root of the
+ Thus "/foo" would match a file named "foo" at either the "root of the
transfer" (for a global rule) or in the merge-file's directory (for a
per-directory rule).
An unqualified "foo" would match any file or directory named "foo"
of the transfer.
it() if the pattern ends with a / then it will only match a
directory, not a file, link, or device.
-
it() rsync chooses between doing a simple string match and wildcard
matching by checking if the pattern contains one of these three wildcard
characters: '*', '?', and '[' .
rule, so rsync never visits any of the files in the "some" or "some/path"
directories. One solution is to ask for all directories in the hierarchy
to be included by using a single rule: "+ */" (put it somewhere before the
-"- *" rule). Another solution is to add specific include rules for all
+"- *" rule), and perhaps use the bf(--prune-empty-dirs) option. Another
+solution is to add specific include rules for all
the parent dirs that need to be visited. For instance, this set of rules
works fine:
itemize(
it() "- *.o" would exclude all filenames matching *.o
- it() "- /foo" would exclude a file called foo in the transfer-root directory
- it() "- foo/" would exclude any directory called foo
- it() "- /foo/*/bar" would exclude any file called bar two
- levels below a directory called foo in the transfer-root directory
- it() "- /foo/**/bar" would exclude any file called bar two
- or more levels below a directory called foo in the transfer-root directory
+ it() "- /foo" would exclude a file (or directory) named foo in the
+ transfer-root directory
+ it() "- foo/" would exclude any directory named foo
+ it() "- /foo/*/bar" would exclude any file named bar which is at two
+ levels below a directory named foo in the transfer-root directory
+ it() "- /foo/**/bar" would exclude any file named bar two
+ or more levels below a directory named foo in the transfer-root directory
it() The combination of "+ */", "+ *.c", and "- *" would include all
- directories and C source files but nothing else.
+ directories and C source files but nothing else (see also the
+ bf(--prune-empty-dirs) option)
it() The combination of "+ foo/", "+ foo/bar.c", and "- *" would include
only the foo directory and foo/bar.c (the foo directory must be
explicitly included or it would be excluded by the "*")
"- foo + bar" is parsed as two rules (assuming that prefix-parsing wasn't
also disabled).
it() You may also specify any of the modifiers for the "+" or "-" rules
- (below) in order to have the rules that are read-in from the file
+ (below) in order to have the rules that are read in from the file
default to having that modifier set. For instance, "merge,-/ .excl" would
treat the contents of .excl as absolute-path excludes,
while "dir-merge,s .filt" and ":sC" would each make all their
This will merge the contents of the /home/user/.global-filter file at the
start of the list and also turns the ".rules" filename into a per-directory
-filter file. All rules read-in prior to the start of the directory scan
+filter file. All rules read in prior to the start of the directory scan
follow the global anchoring rules (i.e. a leading slash matches at the root
of the transfer).
option is used. This file's name is created by appending
".sh" to the batch filename. The .sh file contains
a command-line suitable for updating a destination tree using that
-batch file. It can be executed using a Bourne(-like) shell, optionally
+batch file. It can be executed using a Bourne (or Bourne-like) shell,
+optionally
passing in an alternate destination tree pathname which is then used
instead of the original path. This is useful when the destination tree
path differs from the original destination tree path.
dit(bf(--copy-unsafe-links)) Turn all unsafe symlinks into files, noisily
skip all safe symlinks.
-dit(bf(--links --safe-links)) Duplicate safe symlinks and skip unsafe
+dit(bf(--links --safe-links)) Duplicate safe symlinks and skip unsafe
ones.
dit(bf(--links)) Duplicate all symlinks.
dit(bf(13)) Errors with program diagnostics
dit(bf(14)) Error in IPC code
dit(bf(20)) Received SIGUSR1 or SIGINT
-dit(bf(21)) Some error returned by waitpid()
+dit(bf(21)) Some error returned by code(waitpid())
dit(bf(22)) Error allocating core memory buffers
dit(bf(23)) Partial transfer due to error
dit(bf(24)) Partial transfer due to vanished source files
manpageseealso()
-rsyncd.conf(5)
+bf(rsyncd.conf)(5)
manpagebugs()
-times are transferred as unix time_t values
+times are transferred as *nix time_t values
When transferring to FAT filesystems rsync may re-sync
unmodified files.
manpagesection(VERSION)
-This man page is current for version 2.6.6 of rsync.
+This man page is current for version 2.6.8 of rsync.
manpagesection(CREDITS)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff