-NEWS for rsync 2.6.7 (UNRELEASED)
-Protocol: 29 (unchanged)
-Changes since 2.6.6:
+NEWS for rsync 3.0.0 (UNRELEASED)
+Protocol: 30 (changed)
+Changes since 2.6.9:
BUG FIXES:
- - Fixed a really old bug that caused --checksum (-c) to checksum all the
- files encountered during the delete scan (ouch).
+ - Fixed the output of -ii when combined with one of the --*-dest options:
+ it now itemizes all the items, not just the changed ones.
- - Made hard-links work with symlinks and devices again.
-
- - If a device-file/special-file changes permissions, rsync now updates the
- permissions without recreating the file.
-
- - If the user specifies a remote-host for both the source and destination,
- we now output a syntax error rather than trying to open the destination
- hostspec as a filename.
-
- - When --inplace creates a new destination file, rsync now creates it with
- permissions 0600 instead of 0000 -- this makes restarting possible when
- the transfer gets interrupted in the middle of sending a new file.
-
- - Reject the combination of --inplace and --sparse since the sparse-output
- algorithm doesn't work when overwriting existing data.
-
- - Fixed the directory name in the error that is output when pop_dir()
- fails.
-
- - Really fixed the parsing of a "!" entry in .cvsignore files this time.
-
- - If the generator gets a stat() error on a file, output it (this used to
- require at least -vv for the error to be seen).
-
- - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
- the exit status properly and generate a better error.
-
- - Fixed some glitches in the double-verbose output when using --copy-dest,
- --link-dest, or --compare-dest.
-
- - Fixed the matching of the dont-compress items (e.g. *.gz) against files
- that have a path component containing a slash.
-
- - If code reading a filter/exclude file an EINTR error, rsync now clears
- the error flag on the file handle so it can keep on reading.
-
- - If --relative is active, the sending side cleans up trailing "/" or "/."
- suffixes to avoid triggering a bug in older rsync versions. Also, we now
- reject a ".." dir if it would be sent as a relative dir.
-
- - If a non-directory is in the way of a directory and rsync is run with
- --dry-run and --delete, rsync no longer complains about not being
- able to opendir() the not-yet present directory.
+ - Made the output of all file types consistent when using a --*-dest
+ option. Prior versions used to output too many creation events for
+ matching items.
ENHANCEMENTS:
- - Added the --specials option to tell rsync to copy special files (and does
- not require root). The --devices option now affects just character and
- block devices (which now matches the documentation). The -D option still
- requests both --devices and --specials, and -a still infers -D.
-
- - Added the --append option that makes rsync append data onto files
- that are longer on the source than the destination (this includes new
- files).
-
- - Added the --min-size=SIZE option to exclude small files from the
- transfer.
-
- - Added the --compress-level option to allow you to set how aggressive
- rsync's compression should be (this option implies --compress).
-
- - Enhanced the parsing of the SIZE value for --min-size and --max-size
- to allow easy entry of multiples of 1000 (instead of just multiples
- of 1024) and off-by-one values too (e.g. --max-size=8mb-1).
-
- - The options --human-readable (-h) and --si change the output of the
- --stats and the end-of-run summary to be easier to read.
-
- - If lutimes() and/or lchmod() are around, use them to allow the
- preservation of attributes on symlinks.
-
- - The --link-dest option now affects symlinks and devices (when
- possible).
-
- - Improved the output of hard-linked and copied files when using
- --link-dest, --copy-dest, or --compare-dest.
-
- - Added two config items to the rsyncd.conf parsing: "pre-xfer exec"
- and "post-xfer exec". These allow a command to be specified on a
- per-module basis that will be run before and/or after a daemon-mode
- transfer. (See the manpage for a list of the environment variables
- that are set with information about the transfer.)
-
- - When using the --relative option, you can now insert a dot dir in
- the source path to indicate where the replication of the source dirs
- should start. For example, if you specify a source path of
- rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
- replicate the "baz/dir" part of the source path (note: a trailing
- dot dir is unaffected unless it also has a trailing slash).
-
- - Added some new --no-FOO options that make it easier to override
- unwanted implied or default options. For example, "-a --no-o" (aka
- "--archive --no-owner") can be used to turn off the preservation of
- file ownership that is implied by -a.
-
- - Added the --chmod=MODE option that allows the destination permissions
- to be changed from the source permissions. E.g. --chmod=g+w,o-rwx
-
- - Allow the --temp-dir option to be specified when starting a daemon,
- which sets the default temporary directory for incoming files.
-
- - If --delete is combined with --dirs without --recursive, rsync will
- now delete in any directory whose content is being synchronized.
-
- - If --backup is combined with --delete without --backup-dir (and
- without --delete-excluded), we add a "protect" filter-rule to ensure
- that files with the backup suffix are not deleted.
-
- - The file-count stats that are output by --progress were improved to
- better indicate what the numbers mean. For instance, the output:
- "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
- to be transferred, and we still need to check 8383 more files out of
- a total of 9999.
-
- - The include/exclude code now allows a dir/*** directive (with 3
- trailing stars) to match both the dir itself as well as all the
- content below the dir (dir/** would not match the dir).
-
- - If the --itemize-changes (-i) option is repeated, rsync now includes
- unchanged files in the itemized output (similar to -vv, but without
- all the other verbose messages that can get in the way). Of course,
- the client must be version 2.6.7 for this to work, but the remote
- rsync only needs to be 2.6.7 if you're pushing files.
-
- - Some minor documentation improvements.
-
- - Updated some diffs in the patches dir.
+ - You may specify --max-delete=0 to a 3.0.0 client as long as the
+ receiving side is at least version 3.0.0. This means that you
+ can pull from an older rsync with this option, but pushing to an
+ older rsync will generate an error. *Be careful to never specify
+ a 0 value to older rsync client, or it will be silently ignored.*
INTERNAL:
- - Some buffer sizes were expanded a bit, particularly on systems where
- MAXPATHLEN is overly small (e.g. cygwin).
-
- - If io_printf() tries to format more data than fits in the buffer, exit
- with an error instead of transmitting a truncated buffer.
-
- - If a va_copy macro is defined, lib/snprintf.c will use it when defining
- the VA_COPY macro.
+ - Added some isType() functions that make dealing with signed characters
+ easier without forcing variables via casts.
- - Reduced the amount of stack memory needed for each level of directory
- recursion by nearly MAXPATHLEN bytes.
-
- - The wildmatch function was extended to allow an array of strings to
- be supplied as the string to match. This allows the exclude code to
- do less string copying.
-
- - Got rid of the safe_fname() function (and all the myriad calls) and
- replaced it with a new function in the log.c code that filters all
- the output going to the terminal.
-
- - Unified the f_name() and the f_name_to() functions.
+ - Upgraded the included popt version to 1.10.2 and improved its use of
+ string-handling functions.
DEVELOPER RELATED:
- - Several diffs in the patches dir now use the proper --enable-FOO
- configure option instead of --with-FOO to turn on the inclusion of
- the newly patched feature.
-
+ - ...