-/* -*- c-file-style: "linux" -*-
+/*
+ * Socket and pipe I/O utilities used in rsync.
*
- * Copyright (C) 1996-2001 by Andrew Tridgell
- * Copyright (C) Paul Mackerras 1996
- * Copyright (C) 2001, 2002 by Martin Pool <mbp@samba.org>
+ * Copyright (C) 1996-2001 Andrew Tridgell
+ * Copyright (C) 1996 Paul Mackerras
+ * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
+ * Copyright (C) 2003, 2004, 2005, 2006 Wayne Davison
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
*/
-/**
- * @file io.c
- *
- * Socket and pipe I/O utilities used in rsync.
- *
- * rsync provides its own multiplexing system, which is used to send
- * stderr and stdout over a single socket. We need this because
- * stdout normally carries the binary data stream, and stderr all our
- * error messages.
+/* Rsync provides its own multiplexing system, which is used to send
+ * stderr and stdout over a single socket.
*
* For historical reasons this is off during the start of the
* connection, but it's switched on quite early using
- * io_start_multiplex_out() and io_start_multiplex_in().
- **/
+ * io_start_multiplex_out() and io_start_multiplex_in(). */
#include "rsync.h"
extern int bwlimit;
extern size_t bwlimit_writemax;
-extern int verbose;
extern int io_timeout;
+extern int allowed_lull;
extern int am_server;
extern int am_daemon;
extern int am_sender;
+extern int am_generator;
extern int eol_nulls;
+extern int read_batch;
+extern int csum_length;
extern int checksum_seed;
extern int protocol_version;
-extern char *remote_filesfrom_file;
+extern int remove_source_files;
+extern int preserve_hard_links;
+extern char *filesfrom_host;
extern struct stats stats;
+extern struct file_list *the_file_list;
const char phase_unknown[] = "unknown";
-int select_timeout = SELECT_TIMEOUT;
+int ignore_timeout = 0;
int batch_fd = -1;
int batch_gen_fd = -1;
-/**
- * The connection might be dropped at some point; perhaps because the
- * remote instance crashed. Just giving the offset on the stream is
- * not very helpful. So instead we try to make io_phase_name point to
- * something useful.
- *
- * For buffered/multiplexed I/O these names will be somewhat
- * approximate; perhaps for ease of support we would rather make the
- * buffer always flush when a single application-level I/O finishes.
- *
- * @todo Perhaps we want some simple stack functionality, but there's
- * no need to overdo it.
- **/
-const char *io_write_phase = phase_unknown;
-const char *io_read_phase = phase_unknown;
-
-/** Ignore EOF errors while reading a module listing if the remote
- version is 24 or less. */
-int kludge_around_eof = False;
+/* Ignore an EOF error if non-zero. See whine_about_eof(). */
+int kluge_around_eof = 0;
int msg_fd_in = -1;
int msg_fd_out = -1;
+int sock_f_in = -1;
+int sock_f_out = -1;
static int io_multiplexing_out;
static int io_multiplexing_in;
-static int sock_f_in = -1;
-static int sock_f_out = -1;
-static time_t last_io;
+static time_t last_io_in;
+static time_t last_io_out;
static int no_flush;
static int write_batch_monitor_in = -1;
static char *io_filesfrom_bp;
static char io_filesfrom_lastchar;
static int io_filesfrom_buflen;
+static int defer_forwarding_messages = 0;
+static int select_timeout = SELECT_TIMEOUT;
+static int active_filecnt = 0;
+static OFF_T active_bytecnt = 0;
static void read_loop(int fd, char *buf, size_t len);
-struct redo_list {
- struct redo_list *next;
- int num;
+struct flist_ndx_item {
+ struct flist_ndx_item *next;
+ int ndx;
};
-static struct redo_list *redo_list_head;
-static struct redo_list *redo_list_tail;
+struct flist_ndx_list {
+ struct flist_ndx_item *head, *tail;
+};
-struct msg_list {
- struct msg_list *next;
- char *buf;
+static struct flist_ndx_list redo_list, hlink_list;
+
+struct msg_list_item {
+ struct msg_list_item *next;
int len;
+ char buf[1];
+};
+
+struct msg_list {
+ struct msg_list_item *head, *tail;
};
-static struct msg_list *msg_list_head;
-static struct msg_list *msg_list_tail;
+static struct msg_list msg2genr, msg2sndr;
-static void redo_list_add(int num)
+static void flist_ndx_push(struct flist_ndx_list *lp, int ndx)
{
- struct redo_list *rl;
-
- if (!(rl = new(struct redo_list)))
- exit_cleanup(RERR_MALLOC);
- rl->next = NULL;
- rl->num = num;
- if (redo_list_tail)
- redo_list_tail->next = rl;
+ struct flist_ndx_item *item;
+
+ if (!(item = new(struct flist_ndx_item)))
+ out_of_memory("flist_ndx_push");
+ item->next = NULL;
+ item->ndx = ndx;
+ if (lp->tail)
+ lp->tail->next = item;
else
- redo_list_head = rl;
- redo_list_tail = rl;
+ lp->head = item;
+ lp->tail = item;
+}
+
+static int flist_ndx_pop(struct flist_ndx_list *lp)
+{
+ struct flist_ndx_item *next;
+ int ndx;
+
+ if (!lp->head)
+ return -1;
+
+ ndx = lp->head->ndx;
+ next = lp->head->next;
+ free(lp->head);
+ lp->head = next;
+ if (!next)
+ lp->tail = NULL;
+
+ return ndx;
}
static void check_timeout(void)
{
time_t t;
- if (!io_timeout)
+ if (!io_timeout || ignore_timeout)
return;
- if (!last_io) {
- last_io = time(NULL);
+ if (!last_io_in) {
+ last_io_in = time(NULL);
return;
}
t = time(NULL);
- if (t - last_io >= io_timeout) {
+ if (t - last_io_in >= io_timeout) {
if (!am_server && !am_daemon) {
- rprintf(FERROR, "io timeout after %d seconds - exiting\n",
- (int)(t-last_io));
+ rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
+ (int)(t-last_io_in));
}
exit_cleanup(RERR_TIMEOUT);
}
sock_f_out = f_out;
}
-/** Setup the fd used to receive MSG_* messages. Only needed when
- * we're the generator because the sender and receiver both use the
- * multiplexed I/O setup. */
+void set_io_timeout(int secs)
+{
+ io_timeout = secs;
+
+ if (!io_timeout || io_timeout > SELECT_TIMEOUT)
+ select_timeout = SELECT_TIMEOUT;
+ else
+ select_timeout = io_timeout;
+
+ allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
+}
+
+/* Setup the fd used to receive MSG_* messages. Only needed during the
+ * early stages of being a local sender (up through the sending of the
+ * file list) or when we're the generator (to fetch the messages from
+ * the receiver). */
void set_msg_fd_in(int fd)
{
msg_fd_in = fd;
}
-/** Setup the fd used to send our MSG_* messages. Only needed when
- * we're the receiver because the generator and the sender both use
- * the multiplexed I/O setup. */
+/* Setup the fd used to send our MSG_* messages. Only needed when
+ * we're the receiver (to send our messages to the generator). */
void set_msg_fd_out(int fd)
{
msg_fd_out = fd;
}
/* Add a message to the pending MSG_* list. */
-static void msg_list_add(int code, char *buf, int len)
+static void msg_list_add(struct msg_list *lst, int code, const char *buf, int len)
{
- struct msg_list *ml;
-
- if (!(ml = new(struct msg_list)))
- exit_cleanup(RERR_MALLOC);
- ml->next = NULL;
- if (!(ml->buf = new_array(char, len+4)))
- exit_cleanup(RERR_MALLOC);
- SIVAL(ml->buf, 0, ((code+MPLEX_BASE)<<24) | len);
- memcpy(ml->buf+4, buf, len);
- ml->len = len+4;
- if (msg_list_tail)
- msg_list_tail->next = ml;
+ struct msg_list_item *m;
+ int sz = len + 4 + sizeof m[0] - 1;
+
+ if (!(m = (struct msg_list_item *)new_array(char, sz)))
+ out_of_memory("msg_list_add");
+ m->next = NULL;
+ m->len = len + 4;
+ SIVAL(m->buf, 0, ((code+MPLEX_BASE)<<24) | len);
+ memcpy(m->buf + 4, buf, len);
+ if (lst->tail)
+ lst->tail->next = m;
else
- msg_list_head = ml;
- msg_list_tail = ml;
+ lst->head = m;
+ lst->tail = m;
}
-void send_msg(enum msgcode code, char *buf, int len)
-{
- msg_list_add(code, buf, len);
- msg_list_push(NORMAL_FLUSH);
-}
-
-/** Read a message from the MSG_* fd and dispatch it. This is only
- * called by the generator. */
+/* Read a message from the MSG_* fd and handle it. This is called either
+ * during the early stages of being a local sender (up through the sending
+ * of the file list) or when we're the generator (to fetch the messages
+ * from the receiver). */
static void read_msg_fd(void)
{
char buf[2048];
int tag, len;
/* Temporarily disable msg_fd_in. This is needed to avoid looping back
- * to this routine from read_timeout() and writefd_unbuffered(). */
+ * to this routine from writefd_unbuffered(). */
msg_fd_in = -1;
read_loop(fd, buf, 4);
switch (tag) {
case MSG_DONE:
- if (len != 0) {
+ if (len != 0 || !am_generator) {
rprintf(FERROR, "invalid message %d:%d\n", tag, len);
exit_cleanup(RERR_STREAMIO);
}
- redo_list_add(-1);
+ flist_ndx_push(&redo_list, -1);
break;
case MSG_REDO:
- if (len != 4) {
+ if (len != 4 || !am_generator) {
rprintf(FERROR, "invalid message %d:%d\n", tag, len);
exit_cleanup(RERR_STREAMIO);
}
read_loop(fd, buf, 4);
- redo_list_add(IVAL(buf,0));
+ if (remove_source_files)
+ decrement_active_files(IVAL(buf,0));
+ flist_ndx_push(&redo_list, IVAL(buf,0));
+ break;
+ case MSG_DELETED:
+ if (len >= (int)sizeof buf || !am_generator) {
+ rprintf(FERROR, "invalid message %d:%d\n", tag, len);
+ exit_cleanup(RERR_STREAMIO);
+ }
+ read_loop(fd, buf, len);
+ send_msg(MSG_DELETED, buf, len);
+ break;
+ case MSG_SUCCESS:
+ if (len != 4 || !am_generator) {
+ rprintf(FERROR, "invalid message %d:%d\n", tag, len);
+ exit_cleanup(RERR_STREAMIO);
+ }
+ read_loop(fd, buf, len);
+ if (remove_source_files) {
+ decrement_active_files(IVAL(buf,0));
+ send_msg(MSG_SUCCESS, buf, len);
+ }
+ if (preserve_hard_links)
+ flist_ndx_push(&hlink_list, IVAL(buf,0));
break;
+ case MSG_SOCKERR:
+ if (!am_generator) {
+ rprintf(FERROR, "invalid message %d:%d\n", tag, len);
+ exit_cleanup(RERR_STREAMIO);
+ }
+ close_multiplexing_out();
+ /* FALL THROUGH */
case MSG_INFO:
case MSG_ERROR:
case MSG_LOG:
if (n >= sizeof buf)
n = sizeof buf - 1;
read_loop(fd, buf, n);
- rwrite((enum logcode)tag, buf, n);
+ rwrite(tag, buf, n);
len -= n;
}
break;
default:
- rprintf(FERROR, "unknown message %d:%d\n", tag, len);
+ rprintf(FERROR, "unknown message %d:%d [%s]\n",
+ tag, len, who_am_i());
exit_cleanup(RERR_STREAMIO);
}
msg_fd_in = fd;
}
+/* This is used by the generator to limit how many file transfers can
+ * be active at once when --remove-source-files is specified. Without
+ * this, sender-side deletions were mostly happening at the end. */
+void increment_active_files(int ndx, int itemizing, enum logcode code)
+{
+ /* TODO: tune these limits? */
+ while (active_filecnt >= (active_bytecnt >= 128*1024 ? 10 : 50)) {
+ if (hlink_list.head)
+ check_for_finished_hlinks(itemizing, code);
+ read_msg_fd();
+ }
+
+ active_filecnt++;
+ active_bytecnt += the_file_list->files[ndx]->length;
+}
+
+void decrement_active_files(int ndx)
+{
+ active_filecnt--;
+ active_bytecnt -= the_file_list->files[ndx]->length;
+}
+
/* Try to push messages off the list onto the wire. If we leave with more
* to do, return 0. On error, return -1. If everything flushed, return 1.
* This is only active in the receiver. */
-int msg_list_push(int flush_it_all)
+static int msg2genr_flush(int flush_it_all)
{
static int written = 0;
struct timeval tv;
if (msg_fd_out < 0)
return -1;
- while (msg_list_head) {
- struct msg_list *ml = msg_list_head;
- int n = write(msg_fd_out, ml->buf + written, ml->len - written);
+ while (msg2genr.head) {
+ struct msg_list_item *m = msg2genr.head;
+ int n = write(msg_fd_out, m->buf + written, m->len - written);
if (n < 0) {
if (errno == EINTR)
continue;
tv.tv_usec = 0;
if (!select(msg_fd_out+1, NULL, &fds, NULL, &tv))
check_timeout();
- } else if ((written += n) == ml->len) {
- free(ml->buf);
- msg_list_head = ml->next;
- if (!msg_list_head)
- msg_list_tail = NULL;
- free(ml);
+ } else if ((written += n) == m->len) {
+ msg2genr.head = m->next;
+ if (!msg2genr.head)
+ msg2genr.tail = NULL;
+ free(m);
written = 0;
}
}
return 1;
}
-int get_redo_num(void)
+int send_msg(enum msgcode code, const char *buf, int len)
{
- struct redo_list *next;
- int num;
+ if (msg_fd_out < 0) {
+ if (!defer_forwarding_messages)
+ return io_multiplex_write(code, buf, len);
+ if (!io_multiplexing_out)
+ return 0;
+ msg_list_add(&msg2sndr, code, buf, len);
+ return 1;
+ }
+ msg_list_add(&msg2genr, code, buf, len);
+ msg2genr_flush(NORMAL_FLUSH);
+ return 1;
+}
- while (!redo_list_head)
+int get_redo_num(int itemizing, enum logcode code)
+{
+ while (1) {
+ if (hlink_list.head)
+ check_for_finished_hlinks(itemizing, code);
+ if (redo_list.head)
+ break;
read_msg_fd();
+ }
- num = redo_list_head->num;
- next = redo_list_head->next;
- free(redo_list_head);
- redo_list_head = next;
- if (!next)
- redo_list_tail = NULL;
+ return flist_ndx_pop(&redo_list);
+}
- return num;
+int get_hlink_num(void)
+{
+ return flist_ndx_pop(&hlink_list);
}
/**
io_filesfrom_buflen = 0;
}
-/**
- * It's almost always an error to get an EOF when we're trying to read
- * from the network, because the protocol is self-terminating.
+/* It's almost always an error to get an EOF when we're trying to read from the
+ * network, because the protocol is (for the most part) self-terminating.
*
- * However, there is one unfortunate cases where it is not, which is
- * rsync <2.4.6 sending a list of modules on a server, since the list
- * is terminated by closing the socket. So, for the section of the
- * program where that is a problem (start_socket_client),
- * kludge_around_eof is True and we just exit.
- */
+ * There is one case for the receiver when it is at the end of the transfer
+ * (hanging around reading any keep-alive packets that might come its way): if
+ * the sender dies before the generator's kill-signal comes through, we can end
+ * up here needing to loop until the kill-signal arrives. In this situation,
+ * kluge_around_eof will be < 0.
+ *
+ * There is another case for older protocol versions (< 24) where the module
+ * listing was not terminated, so we must ignore an EOF error in that case and
+ * exit. In this situation, kluge_around_eof will be > 0. */
static void whine_about_eof(int fd)
{
- if (kludge_around_eof && fd == sock_f_in)
- exit_cleanup(0);
+ if (kluge_around_eof && fd == sock_f_in) {
+ int i;
+ if (kluge_around_eof > 0)
+ exit_cleanup(0);
+ /* If we're still here after 10 seconds, exit with an error. */
+ for (i = 10*1000/20; i--; )
+ msleep(20);
+ }
rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
- "(%.0f bytes read so far)\n",
- (double)stats.total_read);
+ "(%.0f bytes received so far) [%s]\n",
+ (double)stats.total_read, who_am_i());
exit_cleanup(RERR_STREAMIO);
}
-
/**
* Read from a socket with I/O timeout. return the number of bytes
* read. If no bytes can be read then exit, never return a number <= 0.
*/
static int read_timeout(int fd, char *buf, size_t len)
{
- int n, ret = 0;
+ int n, cnt = 0;
io_flush(NORMAL_FLUSH);
- while (ret == 0) {
+ while (cnt == 0) {
/* until we manage to read *something* */
fd_set r_fds, w_fds;
struct timeval tv;
FD_ZERO(&r_fds);
FD_ZERO(&w_fds);
FD_SET(fd, &r_fds);
- if (msg_fd_in >= 0) {
- FD_SET(msg_fd_in, &r_fds);
- if (msg_fd_in > maxfd)
- maxfd = msg_fd_in;
- } else if (msg_list_head) {
+ if (msg2genr.head) {
FD_SET(msg_fd_out, &w_fds);
if (msg_fd_out > maxfd)
maxfd = msg_fd_out;
continue;
}
- if (msg_fd_in >= 0 && FD_ISSET(msg_fd_in, &r_fds))
- read_msg_fd();
- else if (msg_list_head && FD_ISSET(msg_fd_out, &w_fds))
- msg_list_push(NORMAL_FLUSH);
+ if (msg2genr.head && FD_ISSET(msg_fd_out, &w_fds))
+ msg2genr_flush(NORMAL_FLUSH);
if (io_filesfrom_f_out >= 0) {
if (io_filesfrom_buflen) {
continue;
/* Don't write errors on a dead socket. */
- if (fd == sock_f_in)
+ if (fd == sock_f_in) {
close_multiplexing_out();
- rsyserr(FERROR, errno, "read error");
+ rsyserr(FSOCKERR, errno, "read error");
+ } else
+ rsyserr(FERROR, errno, "read error");
exit_cleanup(RERR_STREAMIO);
}
buf += n;
len -= n;
- ret += n;
+ cnt += n;
- if (io_timeout && fd == sock_f_in)
- last_io = time(NULL);
+ if (fd == sock_f_in && io_timeout)
+ last_io_in = time(NULL);
}
- return ret;
+ return cnt;
}
/**
{
char ch, *s, *eob = fname + MAXPATHLEN - 1;
int cnt;
- int reading_remotely = remote_filesfrom_file != NULL;
+ int reading_remotely = filesfrom_host != NULL;
int nulls = eol_nulls || reading_remotely;
start:
if (cnt < 0 && (errno == EWOULDBLOCK
|| errno == EINTR || errno == EAGAIN)) {
struct timeval tv;
- fd_set fds;
- FD_ZERO(&fds);
- FD_SET(fd, &fds);
+ fd_set r_fds, e_fds;
+ FD_ZERO(&r_fds);
+ FD_SET(fd, &r_fds);
+ FD_ZERO(&e_fds);
+ FD_SET(fd, &e_fds);
tv.tv_sec = select_timeout;
tv.tv_usec = 0;
- if (!select(fd+1, &fds, NULL, NULL, &tv))
+ if (!select(fd+1, &r_fds, NULL, &e_fds, &tv))
check_timeout();
+ if (FD_ISSET(fd, &e_fds)) {
+ rsyserr(FINFO, errno,
+ "select exception on fd %d", fd);
+ }
continue;
}
if (cnt != 1)
return s - fname;
}
-
static char *iobuf_out;
static int iobuf_out_cnt;
iobuf_out_cnt = 0;
}
-
static char *iobuf_in;
static size_t iobuf_in_siz;
out_of_memory("io_start_buffering_in");
}
-
void io_end_buffering(void)
{
io_flush(NORMAL_FLUSH);
}
}
+void maybe_flush_socket(void)
+{
+ if (iobuf_out && iobuf_out_cnt && time(NULL) - last_io_out >= 5)
+ io_flush(NORMAL_FLUSH);
+}
+
+void maybe_send_keepalive(void)
+{
+ if (time(NULL) - last_io_out >= allowed_lull) {
+ if (!iobuf_out || !iobuf_out_cnt) {
+ if (protocol_version < 29)
+ return; /* there's nothing we can do */
+ write_int(sock_f_out, the_file_list->count);
+ write_shortint(sock_f_out, ITEM_IS_NEW);
+ }
+ if (iobuf_out)
+ io_flush(NORMAL_FLUSH);
+ }
+}
/**
* Continue trying to read len bytes - don't return until len has been
}
}
-
/**
* Read from the file descriptor handling multiplexing - return number
* of bytes read.
{
static size_t remaining;
static size_t iobuf_in_ndx;
- int tag, ret = 0;
- char line[1024];
+ size_t msg_bytes;
+ int tag, cnt = 0;
+ char line[BIGPATHBUFLEN];
if (!iobuf_in || fd != sock_f_in)
return read_timeout(fd, buf, len);
iobuf_in_ndx = 0;
}
- while (ret == 0) {
+ while (cnt == 0) {
if (remaining) {
len = MIN(len, remaining);
memcpy(buf, iobuf_in + iobuf_in_ndx, len);
iobuf_in_ndx += len;
remaining -= len;
- ret = len;
+ cnt = len;
break;
}
read_loop(fd, line, 4);
tag = IVAL(line, 0);
- remaining = tag & 0xFFFFFF;
+ msg_bytes = tag & 0xFFFFFF;
tag = (tag >> 24) - MPLEX_BASE;
switch (tag) {
case MSG_DATA:
- if (remaining > iobuf_in_siz) {
+ if (msg_bytes > iobuf_in_siz) {
if (!(iobuf_in = realloc_array(iobuf_in, char,
- remaining)))
+ msg_bytes)))
out_of_memory("readfd_unbuffered");
- iobuf_in_siz = remaining;
+ iobuf_in_siz = msg_bytes;
}
- read_loop(fd, iobuf_in, remaining);
+ read_loop(fd, iobuf_in, msg_bytes);
+ remaining = msg_bytes;
iobuf_in_ndx = 0;
break;
+ case MSG_DELETED:
+ if (msg_bytes >= sizeof line)
+ goto overflow;
+ read_loop(fd, line, msg_bytes);
+ /* A directory name was sent with the trailing null */
+ if (msg_bytes > 0 && !line[msg_bytes-1])
+ log_delete(line, S_IFDIR);
+ else {
+ line[msg_bytes] = '\0';
+ log_delete(line, S_IFREG);
+ }
+ break;
+ case MSG_SUCCESS:
+ if (msg_bytes != 4) {
+ rprintf(FERROR, "invalid multi-message %d:%ld [%s]\n",
+ tag, (long)msg_bytes, who_am_i());
+ exit_cleanup(RERR_STREAMIO);
+ }
+ read_loop(fd, line, msg_bytes);
+ successful_send(IVAL(line, 0));
+ break;
case MSG_INFO:
case MSG_ERROR:
- if (remaining >= sizeof line) {
- rprintf(FERROR, "multiplexing overflow %d:%ld\n\n",
- tag, (long)remaining);
+ if (msg_bytes >= sizeof line) {
+ overflow:
+ rprintf(FERROR,
+ "multiplexing overflow %d:%ld [%s]\n",
+ tag, (long)msg_bytes, who_am_i());
exit_cleanup(RERR_STREAMIO);
}
- read_loop(fd, line, remaining);
- rwrite((enum logcode)tag, line, remaining);
- remaining = 0;
+ read_loop(fd, line, msg_bytes);
+ rwrite((enum logcode)tag, line, msg_bytes);
break;
default:
- rprintf(FERROR, "unexpected tag %d\n", tag);
+ rprintf(FERROR, "unexpected tag %d [%s]\n",
+ tag, who_am_i());
exit_cleanup(RERR_STREAMIO);
}
}
if (remaining == 0)
io_flush(NORMAL_FLUSH);
- return ret;
+ return cnt;
}
-
-
/**
* Do a buffered read from @p fd. Don't return until all @p n bytes
* have been read. If all @p n can't be read then exit with an
**/
static void readfd(int fd, char *buffer, size_t N)
{
- int ret;
+ int cnt;
size_t total = 0;
while (total < N) {
- ret = readfd_unbuffered(fd, buffer + total, N-total);
- total += ret;
+ cnt = readfd_unbuffered(fd, buffer + total, N-total);
+ total += cnt;
}
if (fd == write_batch_monitor_in) {
stats.total_read += total;
}
+int read_shortint(int f)
+{
+ uchar b[2];
+ readfd(f, (char *)b, 2);
+ return (b[1] << 8) + b[0];
+}
int32 read_int(int f)
{
char b[4];
- int32 ret;
+ int32 num;
readfd(f,b,4);
- ret = IVAL(b,0);
- if (ret == (int32)0xffffffff)
+ num = IVAL(b,0);
+ if (num == (int32)0xffffffff)
return -1;
- return ret;
+ return num;
}
int64 read_longint(int f)
{
- int64 ret;
+ int64 num;
char b[8];
- ret = read_int(f);
+ num = read_int(f);
- if ((int32)ret != (int32)0xffffffff)
- return ret;
+ if ((int32)num != (int32)0xffffffff)
+ return num;
-#ifdef INT64_IS_OFF_T
- if (sizeof (int64) < 8) {
- rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
- exit_cleanup(RERR_UNSUPPORTED);
- }
-#endif
+#if SIZEOF_INT64 < 8
+ rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
+ exit_cleanup(RERR_UNSUPPORTED);
+#else
readfd(f,b,8);
- ret = IVAL(b,0) | (((int64)IVAL(b,4))<<32);
+ num = IVAL(b,0) | (((int64)IVAL(b,4))<<32);
+#endif
- return ret;
+ return num;
}
-void read_buf(int f,char *buf,size_t len)
+void read_buf(int f, char *buf, size_t len)
{
readfd(f,buf,len);
}
-void read_sbuf(int f,char *buf,size_t len)
+void read_sbuf(int f, char *buf, size_t len)
{
readfd(f, buf, len);
- buf[len] = 0;
+ buf[len] = '\0';
}
-unsigned char read_byte(int f)
+uchar read_byte(int f)
{
- unsigned char c;
+ uchar c;
readfd(f, (char *)&c, 1);
return c;
}
+int read_vstring(int f, char *buf, int bufsize)
+{
+ int len = read_byte(f);
+
+ if (len & 0x80)
+ len = (len & ~0x80) * 0x100 + read_byte(f);
+
+ if (len >= bufsize) {
+ rprintf(FERROR, "over-long vstring received (%d > %d)\n",
+ len, bufsize - 1);
+ return -1;
+ }
+
+ if (len)
+ readfd(f, buf, len);
+ buf[len] = '\0';
+ return len;
+}
+
+/* Populate a sum_struct with values from the socket. This is
+ * called by both the sender and the receiver. */
+void read_sum_head(int f, struct sum_struct *sum)
+{
+ sum->count = read_int(f);
+ if (sum->count < 0) {
+ rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
+ (long)sum->count, who_am_i());
+ exit_cleanup(RERR_PROTOCOL);
+ }
+ sum->blength = read_int(f);
+ if (sum->blength < 0 || sum->blength > MAX_BLOCK_SIZE) {
+ rprintf(FERROR, "Invalid block length %ld [%s]\n",
+ (long)sum->blength, who_am_i());
+ exit_cleanup(RERR_PROTOCOL);
+ }
+ sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
+ if (sum->s2length < 0 || sum->s2length > MD4_SUM_LENGTH) {
+ rprintf(FERROR, "Invalid checksum length %d [%s]\n",
+ sum->s2length, who_am_i());
+ exit_cleanup(RERR_PROTOCOL);
+ }
+ sum->remainder = read_int(f);
+ if (sum->remainder < 0 || sum->remainder > sum->blength) {
+ rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
+ (long)sum->remainder, who_am_i());
+ exit_cleanup(RERR_PROTOCOL);
+ }
+}
+
+/* Send the values from a sum_struct over the socket. Set sum to
+ * NULL if there are no checksums to send. This is called by both
+ * the generator and the sender. */
+void write_sum_head(int f, struct sum_struct *sum)
+{
+ static struct sum_struct null_sum;
+
+ if (sum == NULL)
+ sum = &null_sum;
+
+ write_int(f, sum->count);
+ write_int(f, sum->blength);
+ if (protocol_version >= 27)
+ write_int(f, sum->s2length);
+ write_int(f, sum->remainder);
+}
/**
* Sleep after writing to limit I/O bandwidth usage.
static void sleep_for_bwlimit(int bytes_written)
{
static struct timeval prior_tv;
- static long total_written = 0;
+ static long total_written = 0;
struct timeval tv, start_tv;
long elapsed_usec, sleep_usec;
#define ONE_SEC 1000000L /* # of microseconds in a second */
- if (!bwlimit)
+ if (!bwlimit_writemax)
return;
- total_written += bytes_written;
+ total_written += bytes_written;
gettimeofday(&start_tv, NULL);
if (prior_tv.tv_sec) {
total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
}
-
/* Write len bytes to the file descriptor fd, looping as necessary to get
- * the job done and also (in the generator) reading any data on msg_fd_in
- * (to avoid deadlock).
+ * the job done and also (in certain circumstances) reading any data on
+ * msg_fd_in to avoid deadlock.
*
* This function underlies the multiplexing system. The body of the
* application never calls this function directly. */
-static void writefd_unbuffered(int fd,char *buf,size_t len)
+static void writefd_unbuffered(int fd, const char *buf, size_t len)
{
size_t n, total = 0;
- fd_set w_fds, r_fds;
- int maxfd, count, ret;
+ fd_set w_fds, r_fds, e_fds;
+ int maxfd, count, cnt, using_r_fds;
+ int defer_save = defer_forwarding_messages;
struct timeval tv;
no_flush++;
while (total < len) {
FD_ZERO(&w_fds);
- FD_SET(fd,&w_fds);
+ FD_SET(fd, &w_fds);
+ FD_ZERO(&e_fds);
+ FD_SET(fd, &e_fds);
maxfd = fd;
if (msg_fd_in >= 0) {
FD_ZERO(&r_fds);
- FD_SET(msg_fd_in,&r_fds);
+ FD_SET(msg_fd_in, &r_fds);
if (msg_fd_in > maxfd)
maxfd = msg_fd_in;
- }
+ using_r_fds = 1;
+ } else
+ using_r_fds = 0;
tv.tv_sec = select_timeout;
tv.tv_usec = 0;
errno = 0;
- count = select(maxfd + 1, msg_fd_in >= 0 ? &r_fds : NULL,
- &w_fds, NULL, &tv);
+ count = select(maxfd + 1, using_r_fds ? &r_fds : NULL,
+ &w_fds, &e_fds, &tv);
if (count <= 0) {
if (count < 0 && errno == EBADF)
continue;
}
- if (msg_fd_in >= 0 && FD_ISSET(msg_fd_in, &r_fds))
+ if (FD_ISSET(fd, &e_fds)) {
+ rsyserr(FINFO, errno,
+ "select exception on fd %d", fd);
+ }
+
+ if (using_r_fds && FD_ISSET(msg_fd_in, &r_fds))
read_msg_fd();
if (!FD_ISSET(fd, &w_fds))
continue;
n = len - total;
- if (bwlimit && n > bwlimit_writemax)
+ if (bwlimit_writemax && n > bwlimit_writemax)
n = bwlimit_writemax;
- ret = write(fd, buf + total, n);
+ cnt = write(fd, buf + total, n);
- if (ret <= 0) {
- if (ret < 0) {
+ if (cnt <= 0) {
+ if (cnt < 0) {
if (errno == EINTR)
continue;
if (errno == EWOULDBLOCK || errno == EAGAIN) {
if (fd == sock_f_out)
close_multiplexing_out();
rsyserr(FERROR, errno,
- "writefd_unbuffered failed to write %ld bytes: phase \"%s\"",
- (long)len, io_write_phase);
+ "writefd_unbuffered failed to write %ld bytes [%s]",
+ (long)len, who_am_i());
/* If the other side is sending us error messages, try
* to grab any messages they sent before they died. */
while (fd == sock_f_out && io_multiplexing_in) {
- io_timeout = 30;
+ set_io_timeout(30);
+ ignore_timeout = 0;
readfd_unbuffered(sock_f_in, io_filesfrom_buf,
sizeof io_filesfrom_buf);
}
exit_cleanup(RERR_STREAMIO);
}
- total += ret;
+ total += cnt;
+ defer_forwarding_messages = 1;
if (fd == sock_f_out) {
- if (io_timeout)
- last_io = time(NULL);
- sleep_for_bwlimit(ret);
+ if (io_timeout || am_generator)
+ last_io_out = time(NULL);
+ sleep_for_bwlimit(cnt);
}
}
+ defer_forwarding_messages = defer_save;
no_flush--;
}
+static void msg2sndr_flush(void)
+{
+ if (defer_forwarding_messages)
+ return;
+
+ while (msg2sndr.head && io_multiplexing_out) {
+ struct msg_list_item *m = msg2sndr.head;
+ if (!(msg2sndr.head = m->next))
+ msg2sndr.tail = NULL;
+ stats.total_written += m->len;
+ defer_forwarding_messages = 1;
+ writefd_unbuffered(sock_f_out, m->buf, m->len);
+ defer_forwarding_messages = 0;
+ free(m);
+ }
+}
/**
* Write an message to a multiplexed stream. If this fails then rsync
* exits.
**/
-static void mplex_write(enum msgcode code, char *buf, size_t len)
+static void mplex_write(enum msgcode code, const char *buf, size_t len)
{
- char buffer[4096];
+ char buffer[1024];
size_t n = len;
SIVAL(buffer, 0, ((MPLEX_BASE + (int)code)<<24) + len);
if (n > sizeof buffer - 4)
- n = sizeof buffer - 4;
+ n = 0;
+ else
+ memcpy(buffer + 4, buf, n);
- memcpy(&buffer[4], buf, n);
writefd_unbuffered(sock_f_out, buffer, n+4);
len -= n;
buf += n;
- if (len)
+ if (len) {
+ defer_forwarding_messages = 1;
writefd_unbuffered(sock_f_out, buf, len);
+ defer_forwarding_messages = 0;
+ msg2sndr_flush();
+ }
}
-
void io_flush(int flush_it_all)
{
- msg_list_push(flush_it_all);
+ msg2genr_flush(flush_it_all);
+ msg2sndr_flush();
if (!iobuf_out_cnt || no_flush)
return;
iobuf_out_cnt = 0;
}
-
-static void writefd(int fd,char *buf,size_t len)
+static void writefd(int fd, const char *buf, size_t len)
{
if (fd == msg_fd_out) {
rprintf(FERROR, "Internal error: wrong write used in receiver.\n");
}
}
+void write_shortint(int f, int x)
+{
+ uchar b[2];
+ b[0] = x;
+ b[1] = x >> 8;
+ writefd(f, (char *)b, 2);
+}
void write_int(int f,int32 x)
{
writefd(f,b,4);
}
-
-void write_int_named(int f, int32 x, const char *phase)
-{
- io_write_phase = phase;
- write_int(f, x);
- io_write_phase = phase_unknown;
-}
-
-
/*
* Note: int64 may actually be a 32-bit type if ./configure couldn't find any
* 64-bit types on this platform.
return;
}
-#ifdef INT64_IS_OFF_T
- if (sizeof (int64) < 8) {
- rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
- exit_cleanup(RERR_UNSUPPORTED);
- }
-#endif
-
+#if SIZEOF_INT64 < 8
+ rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
+ exit_cleanup(RERR_UNSUPPORTED);
+#else
write_int(f, (int32)0xFFFFFFFF);
SIVAL(b,0,(x&0xFFFFFFFF));
SIVAL(b,4,((x>>32)&0xFFFFFFFF));
writefd(f,b,8);
+#endif
}
-void write_buf(int f,char *buf,size_t len)
+void write_buf(int f, const char *buf, size_t len)
{
writefd(f,buf,len);
}
/** Write a string to the connection */
-void write_sbuf(int f, char *buf)
+void write_sbuf(int f, const char *buf)
{
writefd(f, buf, strlen(buf));
}
-void write_byte(int f,unsigned char c)
+void write_byte(int f, uchar c)
{
writefd(f, (char *)&c, 1);
}
+void write_vstring(int f, const char *str, int len)
+{
+ uchar lenbuf[3], *lb = lenbuf;
+
+ if (len > 0x7F) {
+ if (len > 0x7FFF) {
+ rprintf(FERROR,
+ "attempting to send over-long vstring (%d > %d)\n",
+ len, 0x7FFF);
+ exit_cleanup(RERR_PROTOCOL);
+ }
+ *lb++ = len / 0x100 + 0x80;
+ }
+ *lb = len;
+ writefd(f, (char*)lenbuf, lb - lenbuf + 1);
+ if (len)
+ writefd(f, str, len);
+}
/**
* Read a line of up to @p maxlen characters into @p buf (not counting
return maxlen > 0;
}
-
void io_printf(int fd, const char *format, ...)
{
va_list ap;
- char buf[1024];
+ char buf[BIGPATHBUFLEN];
int len;
va_start(ap, format);
if (len < 0)
exit_cleanup(RERR_STREAMIO);
+ if (len > (int)sizeof buf) {
+ rprintf(FERROR, "io_printf() was too long for the buffer.\n");
+ exit_cleanup(RERR_STREAMIO);
+ }
+
write_sbuf(fd, buf);
}
-
/** Setup for multiplexing a MSG_* stream with the data stream. */
void io_start_multiplex_out(void)
{
}
/** Write an message to the multiplexed data stream. */
-int io_multiplex_write(enum msgcode code, char *buf, size_t len)
+int io_multiplex_write(enum msgcode code, const char *buf, size_t len)
{
if (!io_multiplexing_out)
return 0;
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff