# Makefile
prefix=@prefix@
+datarootdir=@datarootdir@
exec_prefix=@exec_prefix@
-INSTALL_BIN=$(exec_prefix)/bin
-INSTALL_MAN=$(prefix)/man
+bindir=@bindir@
+mandir=@mandir@
LIBS=@LIBS@
CC=@CC@
CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+EXEEXT=@EXEEXT@
+LDFLAGS=@LDFLAGS@
INSTALLCMD=@INSTALL@
+INSTALLMAN=@INSTALL@
-VPATH=@srcdir@
srcdir=@srcdir@
+VPATH=$(srcdir)
SHELL=/bin/sh
+VERSION=@VERSION@
.SUFFIXES:
.SUFFIXES: .c .o
-LIBOBJ=lib/getopt.o lib/fnmatch.o lib/zlib.o lib/compat.o
-OBJS1=rsync.o exclude.o util.o md4.o main.o checksum.o match.o syscall.o log.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o
-DAEMON_OBJ = params.o loadparm.o clientserver.o
-OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ)
+GENFILES=configure.sh config.h.in proto.h proto.h-tstamp rsync.1 rsyncd.conf.5
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h lib/pool_alloc.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
+ lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+ zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
+OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
+ util.o main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
+ fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
+OBJS3=progress.o pipe.o
+DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
+popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
+ popt/popthelp.o popt/poptparse.o
+OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
+
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
+
+# Programs we must have to run the test cases
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
+ trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
+
+CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test
+
+# Objects for CHECK_PROGS to clean
+CHECK_OBJS=tls.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
# note that the -I. is needed to handle config.h when using VPATH
.c.o:
- $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@
+@OBJ_SAVE@
+ $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
+@OBJ_RESTORE@
-all: rsync
+all: conf_stop make_stop rsync$(EXEEXT) @MAKE_MAN@
install: all
- -mkdir -p ${INSTALL_BIN}
- ${INSTALLCMD} -m 755 rsync ${INSTALL_BIN}
- -mkdir -p ${INSTALL_MAN}/man1
- ${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${INSTALL_MAN}/man1
-
-rsync: $(OBJS)
- $(CC) $(CFLAGS) -o rsync $(OBJS) $(LIBS)
-
-proto:
- cat *.c | awk -f mkproto.awk > proto.h
-
-clean:
- rm -f *~ $(OBJS) rsync config.cache config.log config.status
-
-dist:
- tar --exclude-from .ignore -czf dist.tar.gz .
- -mkdir rsync-$(VERSION)
- (cd rsync-$(VERSION) ; tar xzf ../dist.tar.gz)
- tar -czf rsync-$(VERSION).tar.gz rsync-$(VERSION)
- rm -f dist.tar.gz
- echo rsync-$(VERSION) >> .cvsignore
+ -mkdir -p ${DESTDIR}${bindir}
+ ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
+ -mkdir -p ${DESTDIR}${mandir}/man1
+ -mkdir -p ${DESTDIR}${mandir}/man5
+ if test -f $(srcdir)/rsync.1; then ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1; fi
+ if test -f $(srcdir)/rsyncd.conf.5; then ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
+
+install-strip:
+ $(MAKE) INSTALL_STRIP='-s' install
+
+rsync$(EXEEXT): $(OBJS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+$(OBJS): $(HEADERS)
+$(CHECK_OBJS): $(HEADERS)
+
+flist.o: rounding.h
+
+rounding.h: rounding.c rsync.h
+ @for r in 0 1 3; do \
+ if $(CC) $(CFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >/dev/null 2>&1; then \
+ echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
+ if test -f "$$HOME/build_farm/build_test.fns"; then \
+ echo "EXTRA_ROUNDING is $$r" >&2; \
+ fi; \
+ break; \
+ fi; \
+ done
+ @rm -f rounding
+ @if test -f rounding.h; then : ; else \
+ echo "Failed to create rounding.h!"; \
+ exit 1; \
+ fi
+
+tls$(EXEEXT): $(TLS_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
+
+getgroups$(EXEEXT): getgroups.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
+
+getfsdev$(EXEEXT): getfsdev.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
+
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
+
+gen: conf proto.h man
+
+gensend: gen
+ rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
+
+conf:
+ cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
+
+conf_stop: configure.sh config.h.in
+
+configure.sh config.h.in: configure.in aclocal.m4
+ autoconf -o configure.sh
+ autoheader && touch config.h.in
+ @echo 'Configure files changed -- perhaps run:'
+ @echo ' make reconfigure'
+ @exit 1
+
+reconfigure:
+ ./config.status --recheck
+ ./config.status
+
+make_stop: Makefile
+
+Makefile: Makefile.in config.status
+ @./config.status
+ @echo "Makefile updated -- rerun your make command."
+ @exit 1
+
+proto: proto.h-tstamp
+
+proto.h: proto.h-tstamp
+ @echo ' ' >/dev/null
+
+proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c
+ perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
+
+man: rsync.1 rsyncd.conf.5
+
+rsync.1: rsync.yo
+ yodl2man -o rsync.1 $(srcdir)/rsync.yo
+ -$(srcdir)/tweak_manpage rsync.1
+
+rsyncd.conf.5: rsyncd.conf.yo
+ yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+ -$(srcdir)/tweak_manpage rsyncd.conf.5
+
+clean: cleantests
+ rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
+ rounding rounding.h
+
+cleantests:
+ rm -rf ./testtmp*
+
+# We try to delete built files from both the source and build
+# directories, just in case somebody previously configured things in
+# the source directory.
+distclean: clean
+ rm -f Makefile config.h config.status
+ rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
+ rm -f config.cache config.log
+ rm -f $(srcdir)/config.cache $(srcdir)/config.log
+ rm -f shconfig $(srcdir)/shconfig
+ rm -f $(GENFILES)
+
+# this target is really just for my use. It only works on a limited
+# range of machines and is used to produce a list of potentially
+# dead (ie. unused) functions in the code. (tridge)
+finddead:
+ nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
+ nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
+ comm -13 nmused.txt nmfns.txt
+
+# 'check' is the GNU name, 'test' is the name for everybody else :-)
+.PHONY: check test
+
+test: check
+
+# There seems to be no standard way to specify some variables as
+# exported from a Makefile apart from listing them like this.
+
+# This depends on building rsync; if we need any helper programs it
+# should depend on them too.
+
+# We try to run the scripts with POSIX mode on, in the hope that will
+# catch Bash-isms earlier even if we're running on GNU. Of course, we
+# might lose in the future where POSIX diverges from old sh.
+
+check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
+
+check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
+
+testsuite/chown-fake.test:
+ ln -s chown.test $(srcdir)/testsuite/chown-fake.test
+
+testsuite/devices-fake.test:
+ ln -s devices.test $(srcdir)/testsuite/devices-fake.test
+
+# This does *not* depend on building or installing: you can use it to
+# check a version installed from a binary or some other source tree,
+# if you want.
+
+installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+
+# TODO: Add 'dist' target; need to know which files will be included
+
+# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
+.PHONY: splint
+splint:
+ splint +unixlib +gnuextensions -weak rsync.c
+
+
+rsync.dvi: doc/rsync.texinfo
+ texi2dvi -o $@ $<
+
+rsync.ps: rsync.dvi
+ dvips -ta4 -o $@ $<
+
+rsync.pdf: doc/rsync.texinfo
+ texi2dvi -o $@ --pdf $<
+
+
+doxygen:
+ cd $(srcdir) && rm dox/html/* && doxygen
+
+# for maintainers only
+doxygen-upload:
+ rsync -avzv $(srcdir)/dox/html/ --delete \
+ samba.org:/home/httpd/html/rsync/doxygen/head/
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff