- * Dropped support for protocol versions less than 20
- (2.3.0 released 15 Mar 1999) and activated warnings for
- protocols less than 25 (2.5.0 released 23 Aug 2001)
- (Wayne Davison and J.W. Schultz, severally)
-
- * More optimal data transmission for --hard-links (protocol 28).
-
- * More optimal data transmission for --checksum (protocol 28).
-
- * Less memory is used when --checksum is specified.
-
- * Less memory is used in the file list (a per-file savings).
-
- * Changed hardlink info and file_struct + strings to use
- allocation pools. This reduces memory use for large
- filesets and permits freeing memory to the OS. (J.W. Schultz)
-
- * The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe
- and the protocol improved so that (1) it is now impossible to
- have the "redo" pipe fill up and hang rsync, and (2) trailing
- messages from the receiver don't get lost on their way through
- the generator over to the sender (the latter mainly affected
- hard-link messages). (Wayne Davison)
-
- * The reading & writing of the file list in batch-mode is now
- handled by the same code that sends & receives the list over
- the wire. This makes it much easier to maintain.
-
- * Optimized the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter (it no longer scans the
- contents of the mount-point dirs, just to throw away the data).
-
- * Improved the internal uid/gid code to be more portable and
- a little more optimized.
-
-\f
-NEWS for rsync 2.6.0 (1 Jan 2004)
-Protocol: 27 (changed)
-Changes since 2.5.7:
-
- ENHANCEMENTS:
-
- * "ssh" is now the default remote shell for rsync. If you want to
- change this, configure like this: "./configure --with-rsh=rsh".
-
- * Added --files-from, --no-relative, --no-implied-dirs, and --from0.
- Note that --from0 affects the line-ending character for all the
- files read by the --*-from options. (Wayne Davison)
-
- * Length of csum2 is now per-file starting with protocol version
- 27. (J.W. Schultz)
-
- * Per-file dynamic block size is now sqrt(file length). The
- per-file checksum size is determined according to an algorithm
- provided by Donovan Baarda which reduces the probability of rsync
- algorithm corrupting data and falling back using the whole md4
- checksums. (J.W. Schultz, Donovan Baarda)
-
- * The --stats option no longer includes the (debug) malloc summary
- unless the verbose option was specified at least twice.
-
- * Added a new error/warning code for when files vanish from the
- sending side. Made vanished source files not interfere with the
- file-deletion pass when --delete-after was specified.
-
- * Various trailing-info sections are now preceded by a newline.
-
- BUG FIXES:
-
- * Fixed several exclude/include matching bugs when using wild-cards.
- This has a several user-visible effects, all of which make the
- matching more consistent and intuitive. This should hopefully not
- cause anyone problems since it makes the matching work more like
- what people are expecting. (Wayne Davison)
-
- - A pattern with a "**" no longer causes a "*" to match slashes.
- For example, with "/*/foo/**", "foo" must be 2 levels deep.
- [If your string has BOTH "*" and "**" wildcards, changing the
- "*" wildcards to "**" will provide the old behavior in all
- versions.]
-
- - "**/foo" now matches at the base of the transfer (like /foo
- does). [Use "/**/foo" to get the old behavior in all versions.]
-
- - A non-anchored wildcard term floats to match beyond the base of
- the transfer. E.g. "CVS/R*" matches at the end of the path,
- just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*"
- to get the old behavior in all versions.]
-
- - Including a "**" in the match term causes it to be matched
- against the entire path, not just the name portion, even if
- there aren't any interior slashes in the term. E.g. "foo**bar"
- would exclude "/path/foo-bar" (just like before) as well as
- "/foo-path/baz-bar" (unlike before). [Use "foo*bar" to get the
- old behavior in all versions.]
-
- * The exclude list specified in the daemon's config file is now
- properly applied to the pulled items no matter how deep the
- user's file-args are in the source tree. (Wayne Davison)
-
- * For protocol version >= 27, mdfour_tail() is called when the
- block size (including checksum_seed) is a multiple of 64.
- Previously it was not called, giving the wrong MD4 checksum.
- (Craig Barratt)
-
- * For protocol version >= 27, a 64 bit bit counter is used in
- mdfour.c as required by the RFC. Previously only a 32 bit bit
- counter was used, causing incorrect MD4 file checksums for
- file sizes >= 512MB - 4. (Craig Barratt)
-
- * Fixed a crash bug when interacting with older rsync versions and
- multiple files of the same name are destined for the same dir.
- (Wayne Davison)
-
- * Keep tmp names from overflowing MAXPATHLEN.
-
- * Make --link-dest honor the absence of -p, -o, and -g.
-
- * Made rsync treat a trailing slash in the destination in a more
- consistent manner.
-
- * Fixed file I/O error detection. (John Van Essen)
-
- * Fixed bogus "malformed address {hostname}" message in rsyncd log
- when checking IP address against hostnames from "hosts allow"
- and "hosts deny" parameters in config file.
-
- * Print heap statistics when verbose >= 2 instead of when >= 1.
-
- * Fixed a compression (-z) bug when syncing a mostly-matching file
- that contains already-compressed data. (Yasuoka Masahiko and
- Wayne Davison)
-
- * Fixed a bug in the --backup code that could cause deleted files
- to not get backed up.
-
- * When the backup code makes new directories, create them with mode
- 0700 instead of 0755 (since the directory permissions in the
- backup tree are not yet copied from the main tree).
-
- * Call setgroups() in a more portable manner.
-
- * Improved file-related error messages to better indicate exactly
- what pathname failed. (Wayne Davison)
-
- * Fixed some bugs in the handling of --delete and --exclude when
- using the --relative (-R) option. (Wayne Davison)
-
- * Fixed bug that prevented regular files from replacing
- special files and caused a directory in --link-dest or
- --compare-dest to block the creation of a file with the
- same path. A directory still cannot be replaced by a
- regular file unless --delete specified. (J.W. Schultz)
-
- * Detect and report when open or opendir succeed but read and
- readdir fail caused by network filesystem issues and truncated
- files. (David Norwood, Michael Brown, J.W. Schultz)
-
- * Added a fix that should give ssh time to restore the tty settings
- if the user presses Ctrl-C at an ssh password prompt.
-
- INTERNAL:
-
- * Eliminated vestigial support for old versions that we stopped
- supporting. (J.W. Schultz)
-
- * Simplified some of the option-parsing code. (Wayne Davison)
-
- * Some cleanup made to the exclude code, as well as some new
- defines added to enhance readability. (Wayne Davison)
-
- * Changed the protocol-version code so that it can interact at a
- lower protocol level than the maximum supported by both sides.
- Added an undocumented option, --protocol=N, to force the value
- we advertise to the other side (primarily for testing purposes).
- (Wayne Davison)
+ - Dropped support for protocol versions less than 20 (2.3.0 released
+ 15 Mar 1999) and activated warnings for protocols less than 25
+ (2.5.0 released 23 Aug 2001). (Wayne Davison and J.W. Schultz,
+ severally)
+
+ - More optimal data transmission for --hard-links (protocol 28).
+
+ - More optimal data transmission for --checksum (protocol 28).
+
+ - Less memory is used when --checksum is specified.
+
+ - Less memory is used in the file list (a per-file savings).
+
+ - The generator is now better about not modifying the file list
+ during the transfer in order to avoid a copy-on-write memory
+ bifurcation (on systems where fork() uses shared memory).
+ Previously, rsync's shared memory would slowly become unshared,
+ resulting in real memory usage nearly doubling on the receiving
+ side by the end of the transfer. Now, as long as permissions
+ are being preserved, the shared memory should remain that way
+ for the entire transfer.
+
+ - Changed hardlink info and file_struct + strings to use allocation
+ pools. This reduces memory use for large file-sets and permits
+ freeing memory to the OS. (J.W. Schultz)
+
+ - The 2 pipes used between the receiver and generator processes
+ (which are forked on the same machine) were reduced to 1 pipe and
+ the protocol improved so that (1) it is now impossible to have the
+ "redo" pipe fill up and hang rsync, and (2) trailing messages from
+ the receiver don't get lost on their way through the generator
+ over to the sender (which mainly affected hard-link messages and
+ verbose --stats output).
+
+ - Improved the internal uid/gid code to be more portable and a
+ little more optimized.
+
+ - The device numbers sent when using --devices are now sent as
+ separate major/minor values with 32-bit accuracy (protocol 28).
+ Previously, the copied devices were sent as a single 32-bit
+ number. This will make inter-operation of 64-bit binaries more
+ compatible with their 32-bit brethren (with both ends of the
+ connection are using protocol 28). Note that optimizations in the
+ binary protocol for sending the device numbers often results in
+ fewer bytes being used than before, even though more precision is
+ now available.
+
+ - Some cleanup of the exclude/include structures and its code made
+ things clearer (internally), simpler, and more efficient.
+
+ - The reading & writing of the file-list in batch-mode is now
+ handled by the same code that sends & receives the list over the
+ wire. This makes it much easier to maintain. (Note that the
+ batch code is still considered to be experimental.)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff