mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(25 Jan 2002)()()
+manpage(rsync)(1)(26 Jan 2003)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]
+rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST
+
manpagedescription()
rsync is a program that behaves in much the same way that rcp does,
exists.
The rsync remote-update protocol allows rsync to transfer just the
-differences between two sets of files across the network link, using
+differences between two sets of files across the network connection, using
an efficient checksum-search algorithm described in the technical
report that accompanies this package.
manpagesection(GENERAL)
-There are six different ways of using rsync. They are:
+There are eight different ways of using rsync. They are:
itemize(
it() for copying local files. This is invoked when neither
it() for copying from the local machine to a remote rsync
server. This is invoked when the destination path contains a ::
- separator.
+ separator or a rsync:// URL.
+
+ it() for copying from a remote machine using a remote shell
+ program as the transport, using rsync server on the remote
+ machine. This is invoked when the source path contains a ::
+ separator and the --rsh=COMMAND (aka "-e COMMAND") option is
+ also provided.
+
+ it() for copying from the local machine to a remote machine
+ using a remote shell program as the transport, using rsync
+ server on the remote machine. This is invoked when the
+ destination path contains a :: separator and the
+ --rsh=COMMMAND option is also provided.
it() for listing files on a remote machine. This is done the
same way as rsync transfers except that you leave off the
See the file README for installation instructions.
-Once installed you can use rsync to any machine that you can use rsh
-to. rsync uses rsh for its communications, unless both the source and
-destination are local.
+Once installed, you can use rsync to any machine that you can access via
+a remote shell (as well as some that you can access using the rsync
+daemon-mode protocol). For remote transfers, rsync typically uses rsh
+for its communications, but it may have been configured to use a
+different remote shell by default, such as ssh.
-You can also specify an alternative to rsh, either by using the -e
+You can also specify any remote shell you like, either by using the -e
command line option, or by setting the RSYNC_RSH environment variable.
One common substitute is to use ssh, which offers a high degree of
manpagesection(CONNECTING TO AN RSYNC SERVER)
-It is also possible to use rsync without using rsh or ssh as the
+It is also possible to use rsync without a remote shell as the
transport. In this case you will connect to a remote rsync server
running on TCP port 873.
your web proxy. Note that your web proxy's configuration must allow
proxying to port 873.
-Using rsync in this way is the same as using it with rsh or ssh except
+Using rsync in this way is the same as using it with a remote shell except
that:
itemize(
it() you use a double colon :: instead of a single colon to
- separate the hostname from the path.
+ separate the hostname from the path or a rsync:// URL.
it() the remote server may print a message of the day when you
connect.
WARNING: On some systems environment variables are visible to all
users. On those systems using --password-file is recommended.
+manpagesection(CONNECTING TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
+
+It is sometimes useful to be able to set up file transfers using rsync
+server capabilities on the remote machine, while still using rsh or
+ssh for transport. This is especially useful when you want to connect
+to a remote machine via ssh (for encryption or to get through a
+firewall), but you still want to have access to the rsync server
+features (see RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM,
+below).
+
+From the user's perspective, using rsync in this way is the same as
+using it to connect to an rsync server, except that you must
+explicitly set the remote shell program on the command line with
+--rsh=COMMAND. (Setting RSYNC_RSH in the environment will not turn on
+this functionality.)
+
+In order to distinguish between the remote-shell user and the rsync
+server user, you can use '-l user' on your remote-shell command:
+
+quote(rsync -av --rsh="ssh -l ssh-user" rsync-user@host::module[/path] local-path)
+
+The "ssh-user" will be used at the ssh level; the "rsync-user" will be
+used to check against the rsyncd.conf on the remote host.
+
manpagesection(RUNNING AN RSYNC SERVER)
-An rsync server is configured using a config file which by default is
-called /etc/rsyncd.conf. Please see the rsyncd.conf(5) man page for more
-information.
+An rsync server is configured using a config file. Please see the
+rsyncd.conf(5) man page for more information. By default the configuration
+file is called /etc/rsyncd.conf, unless rsync is running over a remote
+shell program and is not running as root; in that case, the default name
+is rsyncd.conf in the current directory on the remote computer
+(typically $HOME).
+
+manpagesection(RUNNING AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM)
+
+See the rsyncd.conf(5) man page for full information on the rsync
+server configuration file.
+
+Several configuration options will not be available unless the remote
+user is root (e.g. chroot, setuid/setgid, etc.). There is no need to
+configure inetd or the services map to include the rsync server port
+if you run an rsync server only via a remote shell program.
+
+To run an rsync server out of a single-use ssh key, use the
+"command=em(COMMAND)" syntax in the remote user's
+authorized_keys entry, where command would be
+
+quote(rsync --server --daemon .)
+
+NOTE: rsync's argument parsing expects the trailing ".", so make sure
+that it's there. If you want to use a rsyncd.conf(5)-style
+configuration file other than the default, you can added a
+--config option to the em(command):
+
+quote(rsync --server --daemon --config=em(file) .)
manpagesection(EXAMPLES)
quote(rsync -Cavz . arvidsjaur:backup)
-each night over a PPP link to a duplicate directory on my machine
+each night over a PPP connection to a duplicate directory on my machine
"arvidsjaur".
To synchronize my samba source trees I use the following Makefile
sync: get put)
this allows me to sync with a CVS directory at the other end of the
-link. I then do cvs operations on the remote machine, which saves a
+connection. I then do cvs operations on the remote machine, which saves a
lot of time as the remote cvs protocol isn't very efficient.
I mirror a directory between my "old" and "new" ftp sites with the
-v, --verbose increase verbosity
-q, --quiet decrease verbosity
-c, --checksum always checksum
- -a, --archive archive mode
+ -a, --archive archive mode, equivalent to -rlptgoD
-r, --recursive recurse into directories
-R, --relative use relative path names
-b, --backup make backups (default ~ suffix)
--backup-dir make backups into this directory
- --suffix=SUFFIX override backup suffix
+ --suffix=SUFFIX define backup suffix
-u, --update update only (don't overwrite newer files)
-l, --links copy symlinks as symlinks
-L, --copy-links copy the referent of symlinks
--no-whole-file turn off --whole-file
-x, --one-file-system don't cross filesystem boundaries
-B, --block-size=SIZE checksum blocking size (default 700)
- -e, --rsh=COMMAND specify rsh replacement
+ -e, --rsh=COMMAND specify the remote shell to use
--rsync-path=PATH specify path to rsync on the remote machine
-C, --cvs-exclude auto ignore files in the same way CVS does
--existing only update files that already exist
--modify-window=NUM Timestamp window (seconds) for file match (default=0)
-T --temp-dir=DIR create temporary files in directory DIR
--compare-dest=DIR also compare destination files relative to DIR
+ --link-dest=DIR create hardlinks to DIR for unchanged files
-P equivalent to --partial --progress
-z, --compress compress file data
--exclude=PATTERN exclude files matching PATTERN
the timestamps as being equal if they are within the value of
modify_window. This is normally zero, but you may find it useful to
set this to a larger value in some situations. In particular, when
-transferring to/from FAT filesystems which cannot represent times with
-a 1 second resolution this option is useful.
+transferring to Windows FAT filesystems which cannot represent times
+with a 1 second resolution --modify-window=1 is useful.
dit(bf(-c, --checksum)) This forces the sender to checksum all files using
a 128-bit MD4 checksum before transfer. The checksum is then
dit(bf(--backup-dir=DIR)) In combination with the --backup option, this
tells rsync to store all backups in the specified directory. This is
-very useful for incremental backups.
+very useful for incremental backups. You can additionally
+specify a backup suffix using the --suffix option
+(otherwise the files backed up in the specified directory
+will keep their original filenames).
dit(bf(--suffix=SUFFIX)) This option allows you to override the default
backup suffix used with the -b option. The default is a ~.
+If --backup-dir and --suffix are both specified,
+the SUFFIX is appended to the filename even in the backup directory.
dit(bf(-u, --update)) This forces rsync to skip any files for which the
destination file already exists and has a date later than the source
dit(bf(-o, --owner)) This option causes rsync to set the owner of the
destination file to be the same as the source file. On most systems,
-only the super-user can set file ownership.
+only the super-user can set file ownership. Note that if the remote system
+is a daemon using chroot, the --numeric-ids option is implied because the
+remote system cannot get access to the usernames from /etc/passwd.
dit(bf(-g, --group)) This option causes rsync to set the group of the
destination file to be the same as the source file. If the receiving
dit(bf(-e, --rsh=COMMAND)) This option allows you to choose an alternative
remote shell program to use for communication between the local and
-remote copies of rsync. By default, rsync will use rsh, but you may
-like to instead use ssh because of its high security.
+remote copies of rsync. Typically, rsync is configured to use rsh by
+default, but you may prefer to use ssh because of its high security.
+
+If this option is used with bf([user@]host::module/path), then the
+remote shell em(COMMMAND) will be used to run an rsync server on the
+remote host, and all data will be transmitted through that remote
+shell connection, rather than through a direct socket connection to a
+running rsync server on the remote host. See the section "CONNECTING
+TO AN RSYNC SERVER OVER A REMOTE SHELL PROGRAM" above.
+
+Command-line arguments are permitted in COMMAND provided that COMMAND is
+presented to rsync as a single argument. For example:
+
+quote(-e "ssh -p 2234")
+
+(Note that ssh users can alternately customize site-specific connect
+options in their .ssh/config file.)
You can also choose the remote shell program using the RSYNC_RSH
-environment variable.
+environment variable, which accepts the same range of values as -e.
See also the --blocking-io option which is affected by this option.
option, but instead it adds all exclude patterns listed in the file
FILE to the exclude list. Blank lines in FILE and lines starting with
';' or '#' are ignored.
+If em(FILE) is bf(-) the list will be read from standard input.
+
dit(bf(--include=PATTERN)) This option tells rsync to not exclude the
specified pattern of filenames. This is useful as it allows you to
dit(bf(--include-from=FILE)) This specifies a list of include patterns
from a file.
+If em(FILE) is bf(-) the list will be read from standard input.
+
dit(bf(-C, --cvs-exclude)) This is a useful shorthand for excluding a
broad range of files that you often don't want to transfer between
The exclude list is initialized to:
-quote(RCS SCCS CVS CVS.adm RCSLOG cvslog.* tags TAGS .make.state
+quote(RCS/ SCCS/ CVS/ .svn/ CVS.adm RCSLOG cvslog.* tags TAGS .make.state
.nse_depinfo *~ #* .#* ,* *.old *.bak *.BAK *.orig *.rej .del-*
*.a *.o *.obj *.so *.Z *.elc *.ln core)
.cvsignore file and matches one of the patterns listed therein. See
the bf(cvs(1)) manual for more information.
-dit(bf(--csum-length=LENGTH)) By default the primary checksum used in
-rsync is a very strong 16 byte MD4 checksum. In most cases you will
-find that a truncated version of this checksum is quite efficient, and
-this will decrease the size of the checksum data sent over the link,
-making things faster.
-
-You can choose the number of bytes in the truncated checksum using the
---csum-length option. Any value less than or equal to 16 is valid.
-
-Note that if you use this option then you run the risk of ending up
-with an incorrect target file. The risk with a value of 16 is
-microscopic and can be safely ignored (the universe will probably end
-before it fails) but with smaller values the risk is higher.
-
-Current versions of rsync actually use an adaptive algorithm for the
-checksum length by default, using a 16 byte file checksum to determine
-if a 2nd pass is required with a longer block checksum. Only use this
-option if you have read the source code and know what you are doing.
-
dit(bf(-T, --temp-dir=DIR)) This option instructs rsync to use DIR as a
scratch directory when creating temporary copies of the files
transferred on the receiving side. The default behavior is to create
dit(bf(--compare-dest=DIR)) This option instructs rsync to use DIR on
the destination machine as an additional directory to compare destination
-files against when doing transfers. This is useful for doing transfers to
-a new destination while leaving existing files intact, and then doing a
+files against when doing transfers if the files are missing in the
+destination directory. This is useful for doing transfers to a new
+destination while leaving existing files intact, and then doing a
flash-cutover when all files have been successfully transferred (for
example by moving directories around and removing the old directory,
-although this requires also doing the transfer with -I to avoid skipping
-files that haven't changed). This option increases the usefulness of
---partial because partially transferred files will remain in the new
-temporary destination until they have a chance to be completed. If DIR is
-a relative path, it is relative to the destination directory.
+although this skips files that haven't changed; see also --link-dest).
+This option increases the usefulness of --partial because partially
+transferred files will remain in the new temporary destination until they
+have a chance to be completed. If DIR is a relative path, it is relative
+to the destination directory.
+
+dit(bf(--link-dest=DIR)) This option behaves like bf(--compare-dest) but
+also will create hard links from em(DIR) to the destination directory for
+unchanged files. Files with changed ownership or permissions will not be
+linked.
dit(bf(-z, --compress)) With this option, rsync compresses any data from
the files that it sends to the destination machine. This
-option is useful on slow links. The compression method used is the
+option is useful on slow connections. The compression method used is the
same method that gzip uses.
Note this this option typically achieves better compression ratios
If standard input is a socket then rsync will assume that it is being
run via inetd, otherwise it will detach from the current terminal and
become a background daemon. The daemon will read the config file
-(/etc/rsyncd.conf) on each connect made by a client and respond to
+(rsyncd.conf) on each connect made by a client and respond to
requests accordingly. See the rsyncd.conf(5) man page for more
details.
in conjunction with the --config option.
dit(bf(--config=FILE)) This specifies an alternate config file than
-the default /etc/rsyncd.conf. This is only relevant when --daemon is
-specified.
+the default. This is only relevant when --daemon is specified.
+The default is /etc/rsyncd.conf unless the daemon is running over
+a remote shell program and the remote user is not root; in that case
+the default is rsyncd.conf in the current directory (typically $HOME).
dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
rather than the default port 873.
a remote shell transport. If -e or --rsh are not specified or are set to
the default "rsh", this defaults to blocking IO, otherwise it defaults to
non-blocking IO. You may find the --blocking-io option is needed for some
-remote shells that can't handle non-blocking IO. Ssh prefers blocking IO.
+remote shells that can't handle non-blocking IO. (Note that ssh prefers
+non-blocking IO.)
dit(bf(--no-blocking-io)) Turn off --blocking-io, for use when it is the
default.
more details.
dit(bf(RSYNC_RSH)) The RSYNC_RSH environment variable allows you to
-override the default shell used as the transport for rsync. This can
-be used instead of the -e option.
+override the default shell used as the transport for rsync. Command line
+options are permitted after the command name, just as in the -e option.
dit(bf(RSYNC_PROXY)) The RSYNC_PROXY environment variable allows you to
redirect your rsync client to use a web proxy when connecting to a
manpagefiles()
-/etc/rsyncd.conf
+/etc/rsyncd.conf or rsyncd.conf
manpageseealso()
times are transferred as unix time_t values
+When transferring to FAT filesystmes rsync may resync
+unmodified files.
+See the comments on the --modify-window option.
+
file permissions, devices etc are transferred as native numerical
values
see also the comments on the --delete option
-Please report bugs! The rsync bug tracking system is online at
-url(http://rsync.samba.org/rsync/)(http://rsync.samba.org/rsync/)
-
-manpagesection(VERSION)
-This man page is current for version 2.0 of rsync
+Please report bugs! See the website at
+url(http://rsync.samba.org/)(http://rsync.samba.org/)
manpagesection(CREDITS)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff