mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(30 Apr 2004)()()
+manpage(rsync)(1)(12 Aug 2004)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
rsync is a program that behaves in much the same way that rcp does,
but has many more options and uses the rsync remote-update protocol to
-greatly speed up file transfers when the destination file already
-exists.
+greatly speed up file transfers when the destination file is being
+updated.
The rsync remote-update protocol allows rsync to transfer just the
differences between two sets of files across the network connection, using
Perhaps the best way to explain the syntax is with some examples:
-quote(rsync *.c foo:src/)
+quote(rsync -t *.c foo:src/)
This would transfer all files matching the pattern *.c from the
current directory to the directory src on the machine foo. If any of
files in the same way, including their setting of the attributes of
/dest/foo:
-quote(rsync -avz /src/foo /dest)
-quote(rsync -avz /src/foo/ /dest/foo)
+quote(rsync -av /src/foo /dest)
+quote(rsync -av /src/foo/ /dest/foo)
You can also use rsync in local-only mode, where both the source and
destination don't have a ':' in the name. In this case it behaves like
somehost.mydomain.com. (See the following section for more details.)
+manpagesection(ADVANCED USAGE)
+
+The syntax for requesting multiple files from a remote host involves using
+quoted spaces in the SRC. Some examples:
+
+quote(rsync host::'modname/dir1/file1 modname/dir2/file2' /dest)
+
+This would copy file1 and file2 into /dest from an rsync daemon. Each
+additional arg must include the same "modname/" prefix as the first one,
+and must be preceded by a single space. All other spaces are assumed
+to be a part of the filenames.
+
+quote(rsync -av host:'dir1/file1 dir2/file2' /dest)
+
+This would copy file1 and file2 into /dest using a remote shell. This
+word-splitting is done by the remote shell, so if it doesn't work it means
+that the remote shell isn't configured to split its args based on
+whitespace (a very rare setting, but not unknown). If you need to transfer
+a filename that contains whitespace, you'll need to either escape the
+whitespace in a way that the remote shell will understand, or use wildcards
+in place of the spaces. Two examples of this are:
+
+quote(rsync -av host:'file\ name\ with\ spaces' /dest)
+quote(rsync -av host:file?name?with?spaces /dest)
+
+This latter example assumes that your shell passes through unmatched
+wildcards. If it complains about "no match", put the name in quotes.
+
+
manpagesection(CONNECTING TO AN RSYNC SERVER)
It is also possible to use rsync without a remote shell as the
-W, --whole-file copy whole files, no incremental checks
--no-whole-file turn off --whole-file
-x, --one-file-system don't cross filesystem boundaries
- -B, --block-size=SIZE checksum blocking size (default 700)
+ -B, --block-size=SIZE force a fixed checksum block-size
-e, --rsh=COMMAND specify the remote shell
--rsync-path=PATH specify path to rsync on the remote machine
--existing only update files that already exist
--ignore-errors delete even if there are I/O errors
--max-delete=NUM don't delete more than NUM files
--partial keep partially transferred files
+ --partial-dir=DIR put a partially transferred file into DIR
--force force deletion of dirs even if not empty
--numeric-ids don't map uid/gid values by user/group name
--timeout=TIME set I/O timeout in seconds
symlink on the destination.
dit(bf(-L, --copy-links)) When symlinks are encountered, the file that
-they point to (the referent) is copied, rather than the symlink.
+they point to (the referent) is copied, rather than the symlink. In older
+versions of rsync, this option also had the side-effect of telling the
+receiving side to follow symlinks, such as symlinks to directories. In a
+modern rsync such as this one, you'll need to specify --keep-dirlinks (-K)
+to get this extra behavior. The only exception is when sending files to
+an rsync that is too old to understand -K -- in that case, the -L option
+will still have the side-effect of -K on that older receiving rsync.
dit(bf(--copy-unsafe-links)) This tells rsync to copy the referent of
symbolic links that point outside the copied tree. Absolute symlinks
with the files and update them on the remote system. Note that if this
option is not used, the optimization that excludes files that have not been
modified cannot be effective; in other words, a missing -t or -a will
-cause the next transfer to behave as if it used -I, and all files will have
-their checksums compared and show up in log messages even if they haven't
-changed.
+cause the next transfer to behave as if it used -I, causing all files to be
+updated (though the rsync algorithm will make the update fairly efficient
+if the files haven't actually changed, you're much better off using -t).
dit(bf(-n, --dry-run)) This tells rsync to not do any file transfers,
instead it will just report the actions it would have taken.
is only relevant without --delete because deletions are now done depth-first.
Requires the --recursive option (which is implied by -a) to have any effect.
-dit(bf(-B, --block-size=BLOCKSIZE)) This controls the block size used in
-the rsync algorithm. See the technical report for details.
+dit(bf(-B, --block-size=BLOCKSIZE)) This forces the block size used in
+the rsync algorithm to a fixed value. It is normally selected based on
+the size of each file being updated. See the technical report for details.
dit(bf(-e, --rsh=COMMAND)) This option allows you to choose an alternative
remote shell program to use for communication between the local and
--partial option tells rsync to keep the partial file which should
make a subsequent transfer of the rest of the file much faster.
+dit(bf(--partial-dir=DIR)) Turns on --partial mode, but tells rsync to
+put a partially transferred file into DIR instead of writing out the
+file to the destination dir. Rsync will also use a file found in this
+dir as data to speed up the transfer (i.e. when you redo the send after
+rsync creates a partial file) and delete such a file after it has served
+its purpose. Note that if --whole-file is specified (or implied) that an
+existing partial-dir file will not be used to speedup the transfer (since
+rsync is sending files without using the incremental rsync algorithm).
+
+Rsync will create the dir if it is missing (just the last dir -- not the
+whole path). This makes it easy to use a relative path (such as
+"--partial-dir=.rsync-partial") to have rsync create the partial-directory
+in the destination file's directory (rsync will also try to remove the DIR
+if a partial file was found to exist at the start of the transfer and the
+DIR was specified as a relative path).
+
+If you are deleting files on the destination and your partial-dir is
+inside the destination hierarchy, make sure you specify an exclude to
+prevent the partial file from being deleted (it could get deleted at the
+end of the transfer when using --delete-after, or at the beginning of the
+transfer when using --delete). E.g. "--exclude=.rsync-partial/".
+
+IMPORTANT: the --partial-dir should not be writable by other users to
+avoid a security risk. E.g. AVOID "/tmp".
+
dit(bf(--progress)) This option tells rsync to print information
showing the progress of the transfer. This gives a bored user
something to watch.
appears to be up-to-date already) or the file-update may be attempted
and then, if the file fails to verify, the update discarded with an
error. This means that it should be safe to re-run a read-batch operation
-if the command got updated. If you wish to force the batched-update to
+if the command got interrupted. If you wish to force the batched-update to
always be attempted regardless of the file's size and date, use the -I
-option. If an error occurs, the destination tree will probably be in a
+option (when reading the batch).
+If an error occurs, the destination tree will probably be in a
partially updated state. In that case, rsync can
be used in its regular (non-batch) mode of operation to fix up the
destination tree.
The rsync version used on all destinations must be at least as new as the
-one used to generate the batch file.
+one used to generate the batch file. Rsync will die with an error if the
+protocol version in the batch file is too new for the batch-reading rsync
+to handle.
The --dry-run (-n) option does not work in batch mode and yields a runtime
error.
user can ignore this detail and just use the shell script as an easy way
to run the appropriate --read-batch command for the batched data.
-See bf(http://www.ils.unc.edu/i2dsi/unc_rsync+.html) for papers and technical
-reports.
+The original batch mode in rsync was based on "rsync+", but the latest
+version uses a new implementation.
manpagesection(SYMBOLIC LINKS)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff