+NEWS for rsync 3.0.3 (29 Jun 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.2:
+
+ BUG FIXES:
+
+ - Fixed a wildcard matching problem in the daemon when a module has
+ "use chroot" enabled.
+
+ - Fixed a crash bug in the hard-link code.
+
+ - Fixed the sending of xattr directory information when the code finds a
+ --link-dest or --copy-dest directory with unchanged xattrs -- the
+ destination directory now gets these unchanged xattrs properly applied.
+
+ - Fixed an xattr-sending glitch that could cause an "Internal abbrev"
+ error.
+
+ - Fixed the combination of --xattrs and --backup.
+
+ - The generator no longer allows a '.' dir to be excluded by a daemon-
+ exclude rule.
+
+ - Fixed deletion handling when copying a single, empty directory (with no
+ files) to a differently named, non-existent directory.
+
+ - Fixed the conversion of spaces into dashes in the %M log escape.
+
+ - Fixed several places in the code that were not returning the right
+ errno when a function failed.
+
+ - Fixed the backing up of a device or special file into a backup dir.
+
+ - Moved the setting of the socket options prior to the connect().
+
+ - If rsync exits in the middle of a --progress output, it now outputs a
+ newline to help prevent the progress line from being overwritten.
+
+ - Fixed a problem with how a destination path with a trailing slash or
+ a trailing dot-dir was compared against the daemon excludes.
+
+ - Fixed the sending of large (size > 16GB) files when talking to an older
+ rsync (protocols < 30): we now use a compatible block size limit.
+
+ - If a file's length is so huge that we overflow a checksum buffer count
+ (i.e. several hundred TB), warn the user and avoid sending an invalid
+ checksum struct over the wire.
+
+ - If a source arg is excluded, --relative no longer adds the excluded
+ arg's implied dirs to the transfer. This fix also made the exclude
+ check happen in the better place in the sending code.
+
+ - Use the overflow_exit() function for overflows, not out_of_memory().
+
+ - Improved the code to better handle a system that has only 32-bit file
+ offsets.
+
+ ENHANCEMENTS:
+
+ - The rsyncd.conf manpage now consistently refers to the parameters in
+ the daemon config file as "parameters".
+
+ - The description of the --inplace option was improved.
+
+ EXTRAS:
+
+ - Added a new script in the support directory, deny-rsync, which allows
+ an admin to (temporarily) replace the rsync command with a script that
+ sends an error message to the remote client via the rsync protocol.
+
+ DEVELOPER RELATED:
+
+ - Fixed a testcase failure if the tests are run as root and made some
+ compatibility improvements.
+
+ - Improved the daemon tests, including checking module comments, the
+ listing of files, and the ensuring that daemon excludes can't affect
+ a dot-dir arg.
+
+ - Improved some build rules for those that build in a separate directory
+ from the source, including better install rules for the man pages, and
+ the fixing of a proto.h-tstamp rule that could make the binaries get
+ rebuild without cause.
+
+ - Improved the testsuite to work around a problem with some utilities
+ (e.g. cp -p & touch -r) rounding sub-second timestamps.
+
+ - Ensure that the early patches don't cause any generated-file hunks to
+ bleed-over into patches that follow.
+
+\f
+NEWS for rsync 3.0.2 (8 Apr 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.1:
+
+ BUG FIXES:
+
+ - Fixed a potential buffer overflow in the xattr code.
+
+ ENHANCEMENTS:
+
+ - None.
+
+ DEVELOPER RELATED:
+
+ - The RPM spec file was improved to install more useful files.
+
+ - A few developer-oriented scripts were moved from the support dir
+ to the packaging dir.
+
+\f
+NEWS for rsync 3.0.1 (3 Apr 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.0:
+
+ NOTABLE CHANGES IN BEHAVIOR:
+
+ - Added the 'c'-flag to the itemizing of non-regular files so that the
+ itemized output doesn't get hidden if there were no attribute changes,
+ and also so that the itemizing of a --copy-links run will distinguish
+ between copying an identical non-regular file and the creation of a
+ revised version with a new value (e.g. a changed symlink referent, a
+ new device number, etc.).
+
+ BUG FIXES:
+
+ - Fixed a crash bug when a single-use rsync daemon (via remote shell) was
+ run without specifying a --config=FILE option.
+
+ - Fixed a crash when backing up a directory that has a default ACL.
+
+ - Fixed a bug in the handling of xattr values that could cause rsync to
+ not think that a file's extended attributes are up-to-date.
+
+ - Fixed the working of --fake-super with --link-dest and --xattrs.
+
+ - Fixed a hang when combining --dry-run with --remove-source-files.
+
+ - Fixed a bug with --iconv's handling of files that cannot be converted:
+ a failed name can no longer cause a transfer failure.
+
+ - Fixed the building of the rounding.h file on systems that need custom
+ CPPFLAGS to be used. Also improved the error reporting if the building
+ of rounding.h fails.
+
+ - Fixed the use of the --protect-args (-s) option when talking to a daemon.
+
+ - Fixed the --ignore-existing option's protection of files on the receiver
+ that are non-regular files on the sender (e.g. if a symlink or a dir on
+ the sender is trying to replace a file on the receiver). The reverse
+ protection (protecting a dir/symlink/device from being replaced by a
+ file) was already working.
+
+ - Fixed an assert failure if --hard-links is combined with an option that
+ can skip a file in a set of hard-linked files (i.e. --ignore-existing,
+ --append, etc.), without skipping all the files in the set.
+
+ - Avoid setting the modify time on a directory that already has the right
+ modify time set. This avoids tweaking the dir's ctime.
+
+ - Improved the daemon-exclude handling to do a better job of applying the
+ exclude rules to path entries. It also sends the user an error just as
+ if the files were actually missing (instead of silently ignoring the
+ user's args), and avoids sending the user the filter-action messages
+ for these non-user-initiated rules.
+
+ - Fixed some glitches with the dry-run code's missing-directory
+ handling, including a problem when combined with --fuzzy.
+
+ - Fixed some glitches with the skipped-directory handling.
+
+ - Fixed the 'T'-flag itemizing of symlinks when --time isn't preserved.
+
+ - Fixed a glitch in the itemizing of permissions with the -E option.
+
+ - The --append option's restricting of transfers to those that add data no
+ longer prevents the updating of non-content changes to otherwise up-to-
+ date files (i.e. those with the same content but differing permissions,
+ ownership, xattrs, etc.).
+
+ - Don't allow --fake-super to be specified with -XX (double --xattrs)
+ because the options conflict. If a daemon has "fake super" enabled,
+ it automatically downgrades a -XX request to -X.
+
+ - Fixed a couple bugs in the parsing of daemon-config excludes that could
+ make a floating exclude rule get treated as matching an absolute path.
+
+ - A daemon doesn't try to auto-refuse the "iconv" option if iconv-support
+ wasn't compiled in to the daemon (avoiding a warning in the logs).
+
+ - Fixed the inclusion of per-dir merge files from implied dirs.
+
+ - Fixed the support/rrsync script to work with the latest options that
+ rsync sends (including its flag-specifying use of -e to the server).
+
+ ENHANCEMENTS:
+
+ - Added the --old-dirs (--old-d) option to make it easier for a user to
+ ask for file-listings with older rsync versions (this is easier than
+ having to type "-r --exclude='/*/*'" manually).
+
+ - When getting an error while asking an older rsync daemon for a file
+ listing, rsync will try to notice if the error is a rejection of the
+ --dirs (-d) option and let the user know how to work around the issue.
+
+ - Added a few more --no-OPTION overrides.
+
+ - Improved the documentation of the --append option.
+
+ - Improved the documentation of the filter/exclude/include daemon
+ parameters.
+
+ INTERNAL:
+
+ - Fixed a couple minor bugs in the included popt library (ones which I
+ sent to the official popt project for inclusion in the 1.14 release).
+
+ - Fixed a stat() call that should have been do_stat() so that the proper
+ normal/64-bit stat() function gets called. (Was in an area that should
+ not have caused problems, though.)
+
+ - Changed the file-glob code to do a directory scan without using the
+ "glob" and "glob.h". This lets us do the globbing with less memory
+ churn, and also avoid adding daemon-excluded items to the returned
+ args.
+
+ DEVELOPER RELATED:
+
+ - The configure script tries to get the user's compiler to not warn about
+ unused function parameters if the build is not including one or more of
+ the ACL/xattrs/iconv features.
+
+ - The configure script now has better checks for figuring out if the
+ included popt code should be used or not.
+
+ - Fixed two testsuite glitches: avoid a failure if someone's "cd" command
+ outputs the current directory when cd-ing to a relative path, and made
+ the itemized test query how rsync was built to determine if it should
+ expect hard-linked symlinks or not.
+
+ - Updated the testsuite to verify that various bug fixes remain fixed.
+
+ - The RPM spec file was updated to have: (1) comments for how to use the
+ rsync-patch tar file, and (2) an /etc/xinetd.d/rsync file.
+
+ - Updated the build scripts to work with a revised FTP directory
+ structure.
+
+\f
+NEWS for rsync 3.0.0 (1 Mar 2008)
+Protocol: 30 (changed)
+Changes since 2.6.9:
+
+ NOTABLE CHANGES IN BEHAVIOR:
+
+ - The handling of implied directories when using --relative has changed to
+ send them as directories (e.g. no implied dir is ever sent as a symlink).
+ This avoids unexpected behavior and should not adversely affect most
+ people. If you're one of those rare individuals who relied upon having
+ an implied dir be duplicated as a symlink, you should specify the
+ transfer of the symlink and the transfer of the referent directory as
+ separate args. (See also --keep-dirlinks and --no-implied-dirs.)
+ Also, exclude rules no longer have a partial effect on implied dirs.
+
+ - Requesting a remote file-listing without specifying -r (--recursive) now
+ sends the -d (--dirs) option to the remote rsync rather than sending -r
+ along with an extra exclude of /*/*. If the remote rsync does not
+ understand the -d option (i.e. it is 2.6.3 or older), you will need to
+ either turn off -d (--no-d), or specify -r --exclude='/*/*' manually.
+
+ - In --dry-run mode, the last line of the verbose summary text is output
+ with a "(DRY RUN)" suffix to help remind you that no updates were made.
+ Similarly, --only-write-batch outputs "(BATCH ONLY)".
+
+ - A writable rsync daemon with "use chroot" disabled now defaults to a
+ symlink-munging behavior designed to make symlinks safer while also
+ allowing absolute symlinks to be stored and retrieved. This also has
+ the effect of making symlinks unusable while they're in the daemon's
+ hierarchy. See the daemon's "munge symlinks" parameter for details.
+
+ - Starting up an extra copy of an rsync daemon will not clobber the pidfile
+ for the running daemon -- if the pidfile exists, the new daemon will exit
+ with an error. This means that your wrapper script that starts the rsync
+ daemon should be made to handle lock-breaking (if you want any automatic
+ breaking of locks to be done).
+
+ BUG FIXES:
+
+ - A daemon with "use chroot = no" and excluded items listed in the daemon
+ config file now properly checks an absolute-path arg specified for these
+ options: --compare-dest, --link-dest, --copy-dest, --partial-dir,
+ --backup-dir, --temp-dir, and --files-from.
+
+ - A daemon can now be told to disable all user- and group-name translation
+ on a per-module basis. This avoids a potential problem with a writable
+ daemon module that has "use chroot" enabled -- if precautions weren't
+ taken, a user could try to add a missing library and get rsync to use
+ it. This makes rsync safer by default, and more configurable when id-
+ translation is not desired. See the daemon's "numeric ids" parameter
+ for full details.
+
+ - A chroot daemon can now indicate which part of its path should affect the
+ chroot call, and which part should become an inside-chroot path for the
+ module. This allows you to have outside-the-transfer paths (such as for
+ libraries) even when you enable chroot protection. The idiom used in the
+ rsyncd.conf file is: path = /chroot/dirs/./dirs/inside
+
+ - If a file's data arrived successfully on the receiving side but the
+ rename of the temporary file to the destination file failed AND the
+ --remove-source-files (or the deprecated --remove-sent-files) option
+ was specified, rsync no longer erroneously removes the associated
+ source file.
+
+ - Fixed the output of -ii when combined with one of the --*-dest options:
+ it now itemizes all the items, not just the changed ones.
+
+ - Made the output of all file types consistent when using a --*-dest
+ option. Prior versions would output too many creation events for
+ matching items.
+
+ - The code that waits for a child pid now handles being interrupted by a
+ signal. This fixes a problem with the pre-xfer exec function not being
+ able to get the exit status from the script.
+
+ - A negated filter rule (i.e. with a '!' modifier) no longer loses the
+ negation when sending the filter rules to the remote rsync.
+
+ - Fixed a problem with the --out-format (aka --log-format) option %f: it
+ no longer outputs superfluous directory info for a non-daemon rsync.
+
+ - Fixed a problem with -vv (double --verbose) and --stats when "pushing"
+ files (which includes local copies). Version 2.6.9 would complete the
+ copy, but exit with an error when the receiver output its memory stats.
+
+ - If --password-file is used on a non-daemon transfer, rsync now complains
+ and exits. This should help users figure out that they can't use this
+ option to control a remote shell's password prompt.
+
+ - Make sure that directory permissions of a newly-created destination
+ directory are handled right when --perms is left off.
+
+ - The itemized output of a newly-created destination directory is now
+ output as a creation event, not a change event.
+
+ - Improved --hard-link so that more corner cases are handled correctly
+ when combined with options such as --link-dest and/or --ignore-existing.
+
+ - The --append option no longer updates a file that has the same size.
+
+ - Fixed a bug when combining --backup and --backup-dir with --inplace:
+ any missing backup directories are now created.
+
+ - Fixed a bug when using --backup and --inplace with --whole-file or
+ --read-batch: backup files are actually created now.
+
+ - The daemon pidfile is checked and created sooner in the startup sequence.
+
+ - If a daemon module's "path" value is not an absolute pathname, the code
+ now makes it absolute internally (making it work properly).
+
+ - Ensure that a temporary file always has owner-write permission while we
+ are writing to it. This avoids problems with some network filesystems
+ when transfering read-only files.
+
+ - Any errors output about password-file reading no longer cause an error at
+ the end of the run about a partial transfer.
+
+ - The --read-batch option for protocol 30 now ensures that several more
+ options are set correctly for the current batch file: --iconv, --acls,
+ --xattrs, --inplace, --append, and --append-verify.
+
+ - Using --only-write-batch to a daemon receiver now works properly (older
+ versions would update some files while writing the batch).
+
+ - Avoid outputting a "file has vanished" message when the file is a broken
+ symlink and --copy-unsafe-links or --copy-dirlinks is used (the code
+ already handled this for --copy-links).
+
+ - Fixed the combination of --only-write-batch and --dry-run.
+
+ - Fixed rsync's ability to remove files that are not writable by the file's
+ owner when rsync is running as the same user.
+
+ - When transferring large files, the sender's hashtable of checksums is
+ kept at a more reasonable state of fullness (no more than 80% full) so
+ that the scanning of the hashtable will not bog down as the number of
+ blocks increases.
+
+ ENHANCEMENTS:
+
+ - A new incremental-recursion algorithm is now used when rsync is talking
+ to another 3.x version. This starts the transfer going more quickly
+ (before all the files have been found), and requires much less memory.
+ See the --recursive option in the manpage for some restrictions.
+
+ - Lowered memory use in the non-incremental-recursion algorithm for typical
+ option values (usually saving from 21-29 bytes per file).
+
+ - The default --delete algorithm is now --delete-during when talking to a
+ 3.x rsync. This is a faster scan than using --delete-before (which is
+ the default when talking to older rsync versions), and is compatible with
+ the new incremental recursion mode.
+
+ - Rsync now allows multiple remote-source args to be specified rather than
+ having to rely on a special space-splitting side-effect of the remote-
+ shell. Additional remote args must specify the same host or an empty one
+ (e.g. empty: :file1 or ::module/file2). For example, this means that
+ local use of brace expansion now works: rsync -av host:dir/{f1,f2} .
+
+ - Added the --protect-args (-s) option, that tells rsync to send most of
+ the command-line args at the start of the transfer rather than as args
+ to the remote-shell command. This protects them from space-splitting,
+ and only interprets basic wildcard special shell characters (*?[).
+
+ - Added the --delete-delay option, which is a more efficient way to delete
+ files at the end of the transfer without needing a separate delete pass.
+
+ - Added the --acls (-A) option to preserve Access Control Lists. This is
+ an improved version of the prior patch that was available, and it even
+ supports OS X ACLs. If you need to have backward compatibility with old,
+ ACL-patched versions of rsync, apply the acls.diff file from the patches
+ dir.
+
+ - Added the --xattrs (-X) option to preserve extended attributes. This is
+ an improved version of the prior patch that was available, and it even
+ supports OS X xattrs (which includes their resource fork data). If you
+ need to have backward compatibility with old, xattr-patched versions of
+ rsync, apply the xattrs.diff file from the patches dir.
+
+ - Added the --fake-super option that allows a non-super user to preserve
+ all attributes of a file by using a special extended-attribute idiom.
+ It even supports the storing of foreign ACL data on your backup server.
+ There is also an analogous "fake super" parameter for an rsync daemon.
+
+ - Added the --iconv option, which allows rsync to convert filenames from
+ one character-set to another during the transfer. The default is to
+ make this feature available as long as your system has iconv_open().
+ If compilation fails, specify --disable-iconv to configure, and then
+ rebuild. If you want rsync to perform character-set conversions by
+ default, you can specify --enable-iconv=CONVERT_STRING with the default
+ value for the --iconv option that you wish to use. For example,
+ "--enable-iconv=." is a good choice. See the rsync manpage for an
+ explanation of the --iconv option's settings.
+
+ - A new daemon config parameter, "charset", lets you control the character-
+ set that is used during an --iconv transfer to/from a daemon module. You
+ can also set your daemon to refuse "no-iconv" if you want to force the
+ client to use an --iconv transfer (requiring an rsync 3.x client).
+
+ - Added the --skip-compress=LIST option to override the default list of
+ file suffixes that will not be compressed when using --compress (-z).
+
+ - The daemon's default for "dont compress" was extended to include:
+ *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg
+ The name-matching routine was also optimized to run more quickly.
+
+ - The --max-delete option now outputs a warning if it skipped any file
+ deletions, including a count of how many deletions were skipped. (Older
+ versions just silently stopped deleting things.)
+
+ - You may specify --max-delete=0 to a 3.0.0 client to request that it warn
+ about extraneous files without deleting anything. If you're not sure
+ what version the client is, you can use the less-obvious --max-delete=-1,
+ as both old and new versions will treat that as the same request (though
+ older versions don't warn).
+
+ - The --hard-link option now uses less memory on both the sending and
+ receiving side for all protocol versions. For protocol 30, the use of a
+ hashtable on the sending side allows us to more efficiently convey to the
+ receiver what files are linked together. This reduces the amount of data
+ sent over the socket by a considerable margin (rather than adding more
+ data), and limits the in-memory storage of the device+inode information
+ to just the sending side for the new protocol 30, or to the receiving
+ side when speaking an older protocol (note that older rsync versions kept
+ the device+inode information on both sides).
+
+ - The filter rules now support a perishable ("p") modifier that marks rules
+ that should not have an effect in a directory that is being deleted. e.g.
+ -f '-p .svn/' would only affect "live" .svn directories.
+
+ - Rsync checks all the alternate-destination args for validity (e.g.
+ --link-dest). This lets the user know when they specified a directory
+ that does not exist.
+
+ - If we get an ENOSYS error setting the time on a symlink, we don't
+ complain about it anymore (for those systems that even support the
+ setting of the modify-time on a symlink).
+
+ - Protocol 30 now uses MD5 checksums instead of MD4.
+
+ - Changed the --append option to not checksum the existing data in the
+ destination file, which speeds up file appending.
+
+ - Added the --append-verify option, which works like the older --append
+ option (verifying the existing data in the destination file). For
+ compatibility with older rsync versions, any use of --append that is
+ talking protocol 29 or older will revert to the --append-verify method.
+
+ - Added the --contimeout=SECONDS option that lets the user specify a
+ connection timeout for rsync daemon access.
+
+ - Documented and extended the support for the RSYNC_CONNECT_PROG variable
+ that can be used to enhance the client side of a daemon connection.
+
+ - Improved the dashes and double-quotes in the nroff manpage output.
+
+ - Rsync now supports a lot more --no-OPTION override options.
+
+ INTERNAL:
+
+ - The file-list sorting algorithm now uses a sort that keeps any same-
+ named items in the same order as they were specified. This allows
+ rsync to always ensure that the first of the duplicates is the one
+ that will be included in the copy. The new sort is also faster
+ than the glibc version of qsort() and mergesort().
+
+ - Rsync now supports the transfer of 64-bit timestamps (time_t values).
+
+ - Made the file-deletion code use a little less stack when recursing
+ through a directory hierarchy of extraneous files.
+
+ - Fixed a build problem with older (2.x) versions of gcc.
+
+ - Added some isType() functions that make dealing with signed characters
+ easier without forcing variables via casts.
+
+ - Changed strcat/strcpy/sprintf function calls to use safer versions.
+
+ - Upgraded the included popt version to 1.10.2 and improved its use of
+ string-handling functions.
+
+ - Added missing prototypes for compatibility functions from the lib dir.
+
+ - Configure determines if iconv() has a const arg, allowing us to avoid a
+ compiler warning.
+
+ - Made the sending of some numbers more efficient for protocol 30.
+
+ - Make sure that a daemon process doesn't mind if the client was weird and
+ omitted the --server option.
+
+ - There are more internal logging categories available in protocol 30 than
+ the age-old FINFO and FERROR, including FERROR_XFER and FWARN. These new
+ categories allow some errors and warnings to go to stderr without causing
+ an erroneous end-of-run warning about some files not being able to be
+ transferred.
+
+ - Improved the use of "const" on pointers.
+
+ - Improved J.W.'s pool_alloc routines to add a way of incrementally freeing
+ older sections of a pool's memory.
+
+ - The getaddrinfo.c compatibility code in the "lib" dir was replaced with
+ some new code (derived from samba, derived from PostgreSQL) that has a
+ better license than the old code.
+
+ DEVELOPER RELATED:
+
+ - Rsync is now licensed under the GPLv3 or later.
+
+ - Rsync is now being maintained in a "git" repository instead of CVS
+ (though the old CVS repository still exists for historical access).
+ Several maintenance scripts were updated to work with git.
+
+ - Generated files are no longer committed into the source repository. The
+ autoconf and autoheader commands are now automatically run during the
+ normal use of "configure" and "make". The latest dev versions of all
+ generated files can also be copied from the samba.org web site (see the
+ prepare-source script's fetch option).
+
+ - The "patches" directory of diff files is now built from branches in the
+ rsync git repository (branch patch/FOO creates file patches/FOO.diff).
+ This directory is now distributed in a separate separate tar file named
+ rsync-patches-VERSION.tar.gz instead of the main rsync-VERSION.tar.gz.
+
+ - The proto.h file is now built using a simple perl script rather than a
+ complex awk script, which proved to be more widely compatible.
+
+ - When running the tests, we now put our per-test temp dirs into a sub-
+ directory named testtmp (which is created, if missing). This allows
+ someone to symlink the testtmp directory to another filesystem (which is
+ useful if the build dir's filesystem does not support ACLs and xattrs,
+ but another filesystem does).
+
+ - Rsync now has a way of handling protocol-version changes during the
+ development of a new protocol version. This causes any out-of-sync
+ versions to speak an older protocol rather than fail in a cryptic manner.
+ This addition makes it safer to deploy a pre-release version that may
+ interact with the public. This new exchange of sub-version info does not
+ interfere with the {MIN,MAX}_PROTOCOL_VERSION checking algorithm (which
+ does not have enough range to allow the main protocol number to be
+ incremented for every minor tweak in that happens during development).
+
+ - The csprotocol.txt file was updated to mention the daemon protocol change
+ in the 3.0.0 release.
+
+\f
NEWS for rsync 2.6.9 (6 Nov 2006)
Protocol: 29 (unchanged)
Changes since 2.6.8:
\f
Partial Protocol History
RELEASE DATE VER. DATE OF COMMIT* PROTOCOL
- ?? ??? 2008 3.0.0 11 Nov 2006 30
+ ?? Aug 2008 3.0.4 30
+ 29 Jun 2008 3.0.3 30
+ 08 Apr 2008 3.0.2 30
+ 03 Apr 2008 3.0.1 30
+ 01 Mar 2008 3.0.0 11 Nov 2006 30
06 Nov 2006 2.6.9 29
22 Apr 2006 2.6.8 29
11 Mar 2006 2.6.7 29