mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(30 Apr 2004)()()
+manpage(rsync)(1)(30 Sep 2004)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
--delete-after receiver deletes after transfer, not before
--ignore-errors delete even if there are I/O errors
--max-delete=NUM don't delete more than NUM files
+ --max-size=SIZE don't transfer any file larger than SIZE
--partial keep partially transferred files
--partial-dir=DIR put a partially transferred file into DIR
--force force deletion of dirs even if not empty
--files-from=FILE read FILE for list of source-file names
-0 --from0 all file lists are delimited by nulls
--version print version number
- --daemon run as an rsync daemon
- --no-detach do not detach from the parent
- --address=ADDRESS bind to the specified address
- --config=FILE specify alternate rsyncd.conf file
- --port=PORT specify alternate rsyncd port number
--blocking-io use blocking I/O for the remote shell
--no-blocking-io turn off --blocking-io
--stats give some file transfer stats
-4 --ipv4 prefer IPv4
-6 --ipv6 prefer IPv6
-h, --help show this help screen
+)
+Rsync can also be run as a daemon, in which case the following options are accepted:
+verb(
+ --daemon run as an rsync daemon
+ --address=ADDRESS bind to the specified address
+ --bwlimit=KBPS limit I/O bandwidth, KBytes per second
+ --config=FILE specify alternate rsyncd.conf file
+ --no-detach do not detach from the parent
+ --port=PORT specify alternate rsyncd port number
+ -4 --ipv4 prefer IPv4
+ -6 --ipv6 prefer IPv6
+ -h, --help show this help screen
)
manpageoptions()
startdit()
dit(bf(-h, --help)) Print a short help page describing the options
-available in rsync
+available in rsync.
-dit(bf(--version)) print the rsync version number and exit
+dit(bf(--version)) print the rsync version number and exit.
dit(bf(-v, --verbose)) This option increases the amount of information you
are given during the transfer. By default, rsync works silently. A
dit(bf(--inplace)) This causes rsync not to create a new copy of the file
and then move it into place. Instead rsync will overwrite the existing
file, meaning that the rsync algorithm can't extract the full amount of
-network reduction it might otherwise.
+network reduction it might otherwise (since it does not yet try to sort
+data matches -- a future version may improve this).
-This option is useful for transfer of large files with block-based change
-or appended data, and also on systems that are disk bound not network bound.
+This option is useful for transfer of large files with block-based changes
+or appended data, and also on systems that are disk bound, not network
+bound.
+
+The option implies --partial (since an interrupted transfer does not delete
+the file), but conflicts with --partial-dir, --compare-dest, and
+--link-dest (a future rsync version will hopefully update the protocol to
+remove these restrictions).
WARNING: The file's data will be in an inconsistent state during the
transfer (and possibly afterward if the transfer gets interrupted), so you
files or directories. This is useful when mirroring very large trees
to prevent disasters.
+dit(bf(--max-size=SIZE)) This tells rsync to avoid transferring any
+file that is larger than the specified SIZE. The SIZE value can be
+suffixed with a letter to indicate a size multiplier (K, M, or G) and
+may be a fractional value (e.g. "--max-size=1.5m").
+
dit(bf(--delete)) This tells rsync to delete any files on the receiving
side that aren't on the sending side. Files that are excluded from
transfer are excluded from being deleted unless you use --delete-excluded.
This option increases the usefulness of --partial because partially
transferred files will remain in the new temporary destination until they
have a chance to be completed. If DIR is a relative path, it is relative
-to the destination directory (which changes in a recursive transfer).
+to the destination directory.
dit(bf(--link-dest=DIR)) This option behaves like bf(--compare-dest) but
also will create hard links from em(DIR) to the destination directory for
unchanged files. Files with changed ownership or permissions will not be
linked.
-Like bf(--compare-dest) if DIR is a relative path, it is relative
-to the destination directory (which changes in a recursive transfer).
An example:
verb(
rsync -av --link-dest=$PWD/prior_dir host:src_dir/ new_dir/
)
+Like bf(--compare-dest) if DIR is a relative path, it is relative to the
+destination directory.
+Note that rsync versions prior to 2.6.1 had a bug that could prevent
+--link-dest from working properly for a non-root user when -o was specified
+(or implied by -a). If the receiving rsync is not new enough, you can work
+around this bug by avoiding the -o option.
+
dit(bf(-z, --compress)) With this option, rsync compresses any data from
the files that it sends to the destination machine. This
option is useful on slow connections. The compression method used is the
timeout in seconds. If no data is transferred for the specified time
then rsync will exit. The default is 0, which means no timeout.
-dit(bf(--daemon)) This tells rsync that it is to run as a daemon. The
-daemon may be accessed using the bf(host::module) or
-bf(rsync://host/module/) syntax.
-
-If standard input is a socket then rsync will assume that it is being
-run via inetd, otherwise it will detach from the current terminal and
-become a background daemon. The daemon will read the config file
-(rsyncd.conf) on each connect made by a client and respond to
-requests accordingly. See the rsyncd.conf(5) man page for more
-details.
-
-dit(bf(--no-detach)) When running as a daemon, this option instructs
-rsync to not detach itself and become a background process. This
-option is required when running as a service on Cygwin, and may also
-be useful when rsync is supervised by a program such as
-bf(daemontools) or AIX's bf(System Resource Controller).
-bf(--no-detach) is also recommended when rsync is run under a
-debugger. This option has no effect if rsync is run from inetd or
-sshd.
-
-dit(bf(--address)) By default rsync will bind to the wildcard address
-when run as a daemon with the --daemon option or when connecting to a
-rsync server. The --address option allows you to specify a specific IP
-address (or hostname) to bind to. This makes virtual hosting possible
-in conjunction with the --config option.
-
-dit(bf(--config=FILE)) This specifies an alternate config file than
-the default. This is only relevant when --daemon is specified.
-The default is /etc/rsyncd.conf unless the daemon is running over
-a remote shell program and the remote user is not root; in that case
-the default is rsyncd.conf in the current directory (typically $HOME).
-
-dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
-rather than the default port 873.
-
dit(bf(--blocking-io)) This tells rsync to use blocking I/O when launching
a remote shell transport. If the remote shell is either rsh or remsh,
rsync defaults to using
file to the destination dir. Rsync will also use a file found in this
dir as data to speed up the transfer (i.e. when you redo the send after
rsync creates a partial file) and delete such a file after it has served
-its purpose.
+its purpose. Note that if --whole-file is specified (or implied) that an
+existing partial-dir file will not be used to speedup the transfer (since
+rsync is sending files without using the incremental rsync algorithm).
Rsync will create the dir if it is missing (just the last dir -- not the
whole path). This makes it easy to use a relative path (such as
if a partial file was found to exist at the start of the transfer and the
DIR was specified as a relative path).
-If you are deleting files on the destination and your partial-dir is
-inside the destination hierarchy, make sure you specify an exclude to
-prevent the partial file from being deleted (it could get deleted at the
-end of the transfer when using --delete-after, or at the beginning of the
-transfer when using --delete). E.g. "--exclude=.rsync-partial/".
-
-IMPORTANT: the --partial-dir should not be writable by other users to
-avoid a security risk. E.g. AVOID "/tmp".
+If the partial-dir value is not an absolute path, rsync will also add an
+--exclude of this value at the end of all your existing excludes. This
+will prevent partial-dir files from being transferred and also prevent the
+untimely deletion of partial-dir items on the receiving side. An example:
+the above --partial-dir option would add an "--exclude=.rsync-partial/"
+rule at the end of any other include/exclude rules. Note that if you are
+supplying your own include/exclude rules, you may need to manually insert a
+rule for this directory exclusion somewhere higher up in the list so that
+it has a high enough priority to be effective (e.g., if your rules specify
+a trailing --exclude=* rule, the auto-added rule will be ineffective).
+
+IMPORTANT: the --partial-dir should not be writable by other users or it
+is a security risk. E.g. AVOID "/tmp".
+
+You can also set the partial-dir value the RSYNC_PARTIAL_DIR environment
+variable. Setting this in the environment does not force --partial to be
+enabled, but rather it effects where partial files go when --partial (or
+-P) is used. For instance, instead of specifying --partial-dir=.rsync-tmp
+along with --progress, you could set RSYNC_PARTIAL_DIR=.rsync-tmp in your
+environment and then just use the -P option to turn on the use of the
+.rsync-tmp dir for partial transfers. The only time the --partial option
+does not look for this environment value is when --inplace was also
+specified (since --inplace conflicts with --partial-dir).
dit(bf(--progress)) This option tells rsync to print information
showing the progress of the transfer. This gives a bored user
These additional numbers tell you how many files have been updated, and
what percent of the total number of files has been scanned.
-dit(bf(-P)) The -P option is equivalent to --partial --progress. I
-found myself typing that combination quite often so I created an
-option to make it easier.
+dit(bf(-P)) The -P option is equivalent to --partial --progress. Its
+purpose is to make it much easier to specify these two options for a long
+transfer that may be interrupted.
dit(bf(--password-file)) This option allows you to provide a password
in a file for accessing a remote rsync server. Note that this option
dit(bf(-4, --ipv4) or bf(-6, --ipv6)) Tells rsync to prefer IPv4/IPv6
when creating sockets. This only affects sockets that rsync has direct
control over, such as the outgoing socket when directly contacting an
-rsync daemon, or the incoming sockets that an rsync daemon uses to
-listen for connections. One of these options may be required in older
-versions of Linux to work around an IPv6 bug in the kernel (if you see
-an "address already in use" error when nothing else is using the port,
-try specifying --ipv6 or --ipv4 when starting the daemon).
+rsync daemon (see also these options in the --daemon mode section).
dit(bf(--checksum-seed=NUM)) Set the MD4 checksum seed to the integer
NUM. This 4 byte checksum seed is included in each block and file
enddit()
+The options allowed when starting an rsync daemon are as follows:
+
+startdit()
+
+dit(bf(--daemon)) This tells rsync that it is to run as a daemon. The
+daemon may be accessed using the bf(host::module) or
+bf(rsync://host/module/) syntax.
+
+If standard input is a socket then rsync will assume that it is being
+run via inetd, otherwise it will detach from the current terminal and
+become a background daemon. The daemon will read the config file
+(rsyncd.conf) on each connect made by a client and respond to
+requests accordingly. See the rsyncd.conf(5) man page for more
+details.
+
+dit(bf(--address)) By default rsync will bind to the wildcard address
+when run as a daemon with the --daemon option or when connecting to a
+rsync server. The --address option allows you to specify a specific IP
+address (or hostname) to bind to. This makes virtual hosting possible
+in conjunction with the --config option.
+
+dit(bf(--bwlimit=KBPS)) This option allows you to specify a maximum
+transfer rate in kilobytes per second for the data the daemon sends.
+The client can still specify a smaller --bwlimit value, but their
+requested value will be rounded down if they try to exceed it. See the
+client version of this option (above) for some extra details.
+
+dit(bf(--config=FILE)) This specifies an alternate config file than
+the default. This is only relevant when --daemon is specified.
+The default is /etc/rsyncd.conf unless the daemon is running over
+a remote shell program and the remote user is not root; in that case
+the default is rsyncd.conf in the current directory (typically $HOME).
+
+dit(bf(--no-detach)) When running as a daemon, this option instructs
+rsync to not detach itself and become a background process. This
+option is required when running as a service on Cygwin, and may also
+be useful when rsync is supervised by a program such as
+bf(daemontools) or AIX's bf(System Resource Controller).
+bf(--no-detach) is also recommended when rsync is run under a
+debugger. This option has no effect if rsync is run from inetd or
+sshd.
+
+dit(bf(--port=PORT)) This specifies an alternate TCP port number to use
+rather than the default port 873.
+
+dit(bf(-4, --ipv4) or bf(-6, --ipv6)) Tells rsync to prefer IPv4/IPv6
+when creating the incoming sockets that the rsync daemon will use to
+listen for connections. One of these options may be required in older
+versions of Linux to work around an IPv6 bug in the kernel (if you see
+an "address already in use" error when nothing else is using the port,
+try specifying --ipv6 or --ipv4 when starting the daemon).
+
+dit(bf(-h, --help)) When specified after --daemon, print a short help
+page describing the options available for starting an rsync daemon.
+
+enddit()
+
manpagesection(EXCLUDE PATTERNS)
The exclude and include patterns specified to rsync allow for flexible
appears to be up-to-date already) or the file-update may be attempted
and then, if the file fails to verify, the update discarded with an
error. This means that it should be safe to re-run a read-batch operation
-if the command got updated. If you wish to force the batched-update to
+if the command got interrupted. If you wish to force the batched-update to
always be attempted regardless of the file's size and date, use the -I
-option. If an error occurs, the destination tree will probably be in a
+option (when reading the batch).
+If an error occurs, the destination tree will probably be in a
partially updated state. In that case, rsync can
be used in its regular (non-batch) mode of operation to fix up the
destination tree.
The rsync version used on all destinations must be at least as new as the
-one used to generate the batch file.
+one used to generate the batch file. Rsync will die with an error if the
+protocol version in the batch file is too new for the batch-reading rsync
+to handle.
The --dry-run (-n) option does not work in batch mode and yields a runtime
error.
user can ignore this detail and just use the shell script as an easy way
to run the appropriate --read-batch command for the batched data.
-See bf(http://www.ils.unc.edu/i2dsi/unc_rsync+.html) for papers and technical
-reports.
+The original batch mode in rsync was based on "rsync+", but the latest
+version uses a new implementation.
manpagesection(SYMBOLIC LINKS)
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff