LIBS=@LIBS@
CC=@CC@
CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+EXEEXT=@EXEEXT@
LDFLAGS=@LDFLAGS@
INSTALLCMD=@INSTALL@
+INSTALLMAN=@INSTALL@
srcdir=@srcdir@
VPATH=$(srcdir)
.SUFFIXES:
.SUFFIXES: .c .o
-LIBOBJ=lib/fnmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
- lib/permstring.o \
- @LIBOBJS@
-ZLIBOBJ=zlib/deflate.o zlib/infblock.o zlib/infcodes.o zlib/inffast.o \
- zlib/inflate.o zlib/inftrees.o zlib/infutil.o zlib/trees.o \
- zlib/zutil.o zlib/adler32.o
-OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o main.o checksum.o match.o syscall.o log.o backup.o
-OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o fileio.o batch.o
+HEADERS=byteorder.h config.h errcode.h proto.h rsync.h lib/pool_alloc.h
+LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
+ lib/permstring.o lib/pool_alloc.o @LIBOBJS@
+ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
+ zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
+OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
+ main.o checksum.o match.o syscall.o log.o backup.o
+OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
+ fileio.o batch.o clientname.o chmod.o
+OBJS3=progress.o pipe.o
DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
popt/popthelp.o popt/poptparse.o
-OBJS=$(OBJS1) $(OBJS2) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
+OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@
-tls_OBJ = tls.o syscall.o lib/permstring.o
+TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o
# Programs we must have to run the test cases
-CHECK_PROGS = rsync tls
+CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
+ trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
+
+# Objects for CHECK_PROGS to clean
+CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
# note that the -I. is needed to handle config.h when using VPATH
.c.o:
@OBJ_SAVE@
- $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< @CC_SHOBJ_FLAG@
+ $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
@OBJ_RESTORE@
-all: rsync
-
-man: rsync.1 rsyncd.conf.5
+all: rsync$(EXEEXT)
install: all
- -mkdir -p ${bindir}
- ${INSTALLCMD} -m 755 rsync ${bindir}
- -mkdir -p ${mandir}/man1
- -mkdir -p ${mandir}/man5
- ${INSTALLCMD} -m 644 $(srcdir)/rsync.1 ${mandir}/man1
- ${INSTALLCMD} -m 644 $(srcdir)/rsyncd.conf.5 ${mandir}/man5
+ -mkdir -p ${DESTDIR}${bindir}
+ ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
+ -mkdir -p ${DESTDIR}${mandir}/man1
+ -mkdir -p ${DESTDIR}${mandir}/man5
+ ${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
+ ${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5
install-strip:
- $(MAKE) INSTALLCMD='$(INSTALLCMD) -s' install
+ $(MAKE) INSTALL_STRIP='-s' install
+
+rsync$(EXEEXT): $(OBJS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+$(OBJS): $(HEADERS)
+
+tls$(EXEEXT): $(TLS_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
-rsync: $(OBJS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o rsync $(OBJS) $(LIBS)
+getgroups$(EXEEXT): getgroups.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
-tls: $(tls_OBJ)
- $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(tls_OBJ) $(LIBS)
+getfsdev$(EXEEXT): getfsdev.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
-Makefile: Makefile.in configure config.status
- echo "WARNING: You need to run ./config.status --recheck"
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
-# don't actually run autoconf, just issue a warning
-configure: configure.in
- echo "WARNING: you need to rerun autoconf"
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
-rsync.1: rsync.yo
- yodl2man -o rsync.1 rsync.yo
+gen:
+ $(MAKE) -C $(srcdir) -f prepare-source.mak gen
-rsyncd.conf.5: rsyncd.conf.yo
- yodl2man -o rsyncd.conf.5 rsyncd.conf.yo
+man:
+ $(MAKE) -C $(srcdir) -f prepare-source.mak man
proto:
- cat *.c lib/compat.c | awk -f mkproto.awk > proto.h
+ $(MAKE) -C $(srcdir) -f prepare-source.mak proto
-clean:
- rm -f *~ $(OBJS) rsync $(TLS_OBJ) tls
- rm -rf ./testtmp
- rm -f config.cache
+clean: cleantests
+ rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)
+cleantests:
+ rm -rf ./testtmp*
+
+# We try to delete built files from both the source and build
+# directories, just in case somebody previously configured things in
+# the source directory.
distclean: clean
rm -f Makefile config.h config.status
+ rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
+
+ rm -f config.cache config.log
+ rm -f $(srcdir)/config.cache $(srcdir)/config.log
+
+ rm -f shconfig $(srcdir)/shconfig
# this target is really just for my use. It only works on a limited
# range of machines and is used to produce a list of potentially
finddead:
nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
- comm -13 nmused.txt nmfns.txt
+ comm -13 nmused.txt nmfns.txt
# 'check' is the GNU name, 'test' is the name for everybody else :-)
.PHONY: check test
# There seems to be no standard way to specify some variables as
# exported from a Makefile apart from listing them like this.
-# TODO: Tests that depend on built test aide programs like tls need to
-# know where the build directory is.
-
# This depends on building rsync; if we need any helper programs it
# should depend on them too.
# might lose in the future where POSIX diverges from old sh.
check: all $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TLS=`pwd`/tls rsync_bin=`pwd`/rsync srcdir="$(srcdir)" $(srcdir)/runtests.sh
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync$(EXEEXT) srcdir="$(srcdir)" $(srcdir)/runtests.sh
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o @BUILD_POPT@ $(LIBS)
# This does *not* depend on building or installing: you can use it to
# check a version installed from a binary or some other source tree,
# if you want.
installcheck: $(CHECK_PROGS)
- POSIXLY_CORRECT=1 TLS=`pwd`/tls rsync_bin="$(bindir)/rsync" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
# TODO: Add 'dist' target; need to know which files will be included
+
+# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
+.PHONY: splint
+splint:
+ splint +unixlib +gnuextensions -weak rsync.c
+
+
+rsync.dvi: doc/rsync.texinfo
+ texi2dvi -o $@ $<
+
+rsync.ps: rsync.dvi
+ dvips -ta4 -o $@ $<
+
+rsync.pdf: doc/rsync.texinfo
+ texi2dvi -o $@ --pdf $<
+
+
+doxygen:
+ cd $(srcdir) && rm dox/html/* && doxygen
+
+# for maintainers only
+doxygen-upload:
+ rsync -avzv $(srcdir)/dox/html/ --delete \
+ samba.org:/home/httpd/html/rsync/doxygen/head/