+ -mkdir -p ${DESTDIR}${bindir}
+ ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
+ -mkdir -p ${DESTDIR}${mandir}/man1
+ -mkdir -p ${DESTDIR}${mandir}/man5
+ if test -f rsync.1; then ${INSTALLMAN} -m 644 rsync.1 ${DESTDIR}${mandir}/man1; fi
+ if test -f rsyncd.conf.5; then ${INSTALLMAN} -m 644 rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
+
+install-strip:
+ $(MAKE) INSTALL_STRIP='-s' install
+
+rsync$(EXEEXT): $(OBJS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+
+$(OBJS): $(HEADERS)
+$(CHECK_OBJS): $(HEADERS)
+
+flist.o: rounding.h
+
+rounding.h: rounding.c rsync.h
+ @for r in 0 1 3; do \
+ if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
+ echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
+ if test -f "$$HOME/build_farm/build_test.fns"; then \
+ echo "EXTRA_ROUNDING is $$r" >&2; \
+ fi; \
+ break; \
+ fi; \
+ done
+ @rm -f rounding
+ @if test -f rounding.h; then : ; else \
+ cat rounding.out 1>&2; \
+ echo "Failed to create rounding.h!" 1>&2; \
+ exit 1; \
+ fi
+ @rm -f rounding.out
+
+tls$(EXEEXT): $(TLS_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
+
+getgroups$(EXEEXT): getgroups.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
+
+getfsdev$(EXEEXT): getfsdev.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
+
+TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
+trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
+
+T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
+t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
+
+gen: conf proto.h man
+
+gensend: gen
+ rsync -aivzc $(GENFILES) samba.org:/home/ftp/pub/rsync/generated-files/
+
+conf:
+ cd $(srcdir) && $(MAKE) -f prepare-source.mak conf
+
+conf_stop: configure.sh config.h.in
+
+configure.sh config.h.in: configure.in aclocal.m4
+ @if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
+ @if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
+ autoconf -o configure.sh
+ autoheader && touch config.h.in
+ @if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
+ echo "configure.sh is unchanged."; \
+ rm configure.sh.old; \
+ else \
+ echo "configure.sh has CHANGED."; \
+ fi
+ @if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
+ echo "config.h.in is unchanged."; \
+ rm config.h.in.old; \
+ else \
+ echo "config.h.in has CHANGED."; \
+ fi
+ @if test -f configure.sh.old -o -f config.h.in.old; then \
+ if test "$(MAKECMDGOALS)" = reconfigure; then \
+ echo 'Continuing with "make reconfigure".'; \
+ else \
+ echo 'You may need to run:'; \
+ echo ' make reconfigure'; \
+ exit 1; \
+ fi \
+ fi
+
+reconfigure: configure.sh
+ ./config.status --recheck
+ ./config.status
+
+make_stop: Makefile
+
+Makefile: Makefile.in config.status
+ @if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
+ @./config.status
+ @if diff Makefile Makefile.old >/dev/null 2>&1; then \
+ echo "Makefile is unchanged."; \
+ rm Makefile.old; \
+ else \
+ echo "Makefile updated -- rerun your make command."; \
+ exit 1; \
+ fi
+
+proto: proto.h-tstamp
+
+proto.h: proto.h-tstamp
+ @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
+
+proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c
+ perl $(srcdir)/mkproto.pl $(srcdir)/*.c $(srcdir)/lib/compat.c
+
+man: rsync.1 rsyncd.conf.5
+ @if test -f rsync.1; then :; else cp -p $(srcdir)/rsync.1 .; fi
+ @if test -f rsyncd.conf.5; then :; else cp -p $(srcdir)/rsyncd.conf.5 .; fi
+
+rsync.1: rsync.yo
+ yodl2man -o rsync.1 $(srcdir)/rsync.yo
+ -$(srcdir)/tweak_manpage rsync.1
+
+rsyncd.conf.5: rsyncd.conf.yo
+ yodl2man -o rsyncd.conf.5 $(srcdir)/rsyncd.conf.yo
+ -$(srcdir)/tweak_manpage rsyncd.conf.5
+
+clean: cleantests
+ rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
+ rounding rounding.h *.old
+
+cleantests:
+ rm -rf ./testtmp*
+
+# We try to delete built files from both the source and build
+# directories, just in case somebody previously configured things in
+# the source directory.
+distclean: clean
+ rm -f Makefile config.h config.status
+ rm -f lib/dummy popt/dummy zlib/dummy
+ rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
+ rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
+ rm -f config.cache config.log
+ rm -f $(srcdir)/config.cache $(srcdir)/config.log
+ rm -f shconfig $(srcdir)/shconfig
+ rm -f $(GENFILES)
+ rm -rf autom4te.cache
+
+# this target is really just for my use. It only works on a limited
+# range of machines and is used to produce a list of potentially
+# dead (ie. unused) functions in the code. (tridge)
+finddead:
+ nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
+ nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
+ comm -13 nmused.txt nmfns.txt
+
+# 'check' is the GNU name, 'test' is the name for everybody else :-)
+.PHONY: check test
+
+test: check
+
+# There seems to be no standard way to specify some variables as
+# exported from a Makefile apart from listing them like this.
+
+# This depends on building rsync; if we need any helper programs it
+# should depend on them too.
+
+# We try to run the scripts with POSIX mode on, in the hope that will
+# catch Bash-isms earlier even if we're running on GNU. Of course, we
+# might lose in the future where POSIX diverges from old sh.
+
+check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
+
+check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
+
+wildtest.o: wildtest.c lib/wildmatch.c rsync.h config.h
+wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
+
+testsuite/chown-fake.test:
+ ln -s chown.test $(srcdir)/testsuite/chown-fake.test
+
+testsuite/devices-fake.test:
+ ln -s devices.test $(srcdir)/testsuite/devices-fake.test
+
+# This does *not* depend on building or installing: you can use it to
+# check a version installed from a binary or some other source tree,
+# if you want.
+
+installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
+ POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
+
+# TODO: Add 'dist' target; need to know which files will be included
+
+# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
+.PHONY: splint
+splint:
+ splint +unixlib +gnuextensions -weak rsync.c
+
+
+rsync.dvi: doc/rsync.texinfo
+ texi2dvi -o $@ $<
+
+rsync.ps: rsync.dvi
+ dvips -ta4 -o $@ $<