-NEWS for rsync 2.6.3 (UNRELEASED)
-Protocol: 28 (unchanged)
-Changes since 2.6.2:
+NEWS for rsync 2.6.4 (UNRELEASED)
+Protocol: 29 (changed)
+Changes since 2.6.3:
+ OUTPUT CHANGES:
+
+ - When rsync deletes a directory and outputs a verbose message about
+ it, it now appends a trailing slash to the name instead of (only
+ sometimes) outputting a preceding "directory " string.
+
+ - The --stats output will contain file-list time statistics if both
+ sides are 2.6.4, or if the local side is 2.6.4 and the files are
+ being pushed (since the stats come from the sending side).
+
BUG FIXES:
- - Fixed a crash bug that might appear when --delete was used and
- multiple source directories were specified.
+ - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3
+ was only treating it as a special token in an rsync include/exclude
+ file).
- - The --backup code no longer attempts to create some directories
- over and over again (generating warnings along the way).
+ - The --dry-run option (-n) now mentions changes in directories (w/-v).
+ It also now includes the normal uptodate output information for -vv.
- - Fixed a bug in the reading of the secrets file (by the daemon) and
- the password file (by the client): the files no longer need to be
- terminated by a newline for their content to be read in.
+ - Avoid a mkdir warning when removing a directory in the destination
+ that already exists in the --backup-dir.
- - If a file has a read error on the sending side, the receiver will
- no longer keep the resulting file unless the --partial option was
- specified. (Note: both sides must be running 2.6.3 for this to
- work -- older receivers always keep the file, and older senders
- don't tell the receiver that the file was not read correctly.)
+ - An OS that has a binary mode for its files (such as cygwin0 needed
+ setmode(fd, O_BINARY) called on the temp-file we opened with
+ mkstemp(). (Fix derived from the cygwin's rsync package.)
- - Fixed an age-old crash problem with --read-batch on a local copy
- (rsync was improperly assuming --whole-file for the local copy).
+ - Fixed a potential hang when verbosity is high, the client side is
+ the sender, and the file-list is large.
- - Files specified in the daemon's "exclude" or "exclude from" config
- items are now excluded from being uploaded (assuming that the module
- allows uploading at all) in addition to the old download exclusion.
+ - We now check if the OS doesn't support using mknod() for creating
+ FIFOs and sockets, and compile-in using mkfifo() and socket() when
+ necessary.
- - When using --backup without a --backup-dir, rsync no longer preserves
- the modify time on directories. This avoids confusing NFS.
+ - Fixed an off-by-one error in the handling of --max-delete=N.
- - Fixed a bug in the daemon authentication code when using one of the
- batch-processing options.
+ - One place in the code wasn't checking if fork() failed.
- ENHANCEMENTS:
+ - The "ignore nonreadable" daemon parameter no longer affects symlinks
+ that are being copied, even if they point nowhere.
- - The new option --keep-dirlinks (-K) allows you to symlink a directory
- onto another patition on the receiving side and have rsync treat it
- as matching a normal directory from the sender.
+ - If the OS does not have lchown() and its chown() tries to set the
+ referent of a symlink (as it should), we no longer try to set the
+ user and group of a symlink.
- - Added the "write only" option to the daemon's config file.
+ - The generator now properly runs the hard-link loop and the dir-time
+ rewriting loop after we're sure that the redo phase is complete.
- - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
- and documented all these options in the man page.
+ - When --backup was specified with --partial-dir=DIR (where DIR is a
+ relative path), the backup code was erroneously trying to backup a
+ file that was put into the partial-dir.
- - Improved the handling of the --bwlimit option so that it's less
- bursty, more accurate, and works properly over a larger range of
- values.
+ - One call to flush_write_file() was not being checked for an error.
- - The rsync daemon-over-ssh code now looks for SSH_CONNECTION and
- SSH2_CLIENT in addition to SSH_CLIENT to figure out the IP address.
+ - The --no-relative option was not being sent from the client to a
+ server sender.
- - Added the --checksum-seed=N option for advanced users.
+ - If an rsync daemon specified "dont compress = ..." for a file and the
+ client tried to specify --compress, the libz code was not handling a
+ compression level of 0 properly. This could cause a transfer failure
+ if the block-size for a file was large enough (i.e. rsync might have
+ exited with an error for large files).
- INTERNAL:
+ ENHANCEMENTS:
- - Some cleanup in the exclude code has saved some per-exclude memory
- and made the code easier to maintain.
+ - Rsync now supports popt's option aliases, which means that you can
+ use /etc/popt and/or ~/.popt to create your own option aliases.
+
+ - Added the --delete-during (--del) option which will delete files
+ from on the receiving side incrementally as each directory in the
+ transfer is being processed (which makes it more efficient than the
+ default, before-the-transfer behavior of --delete). Note that the
+ --del option is implemented as an internally-defined popt alias, so
+ an rsync daemon that refuses "delete" (which, for safety's sake,
+ really matches "delete*") will still refuse all delete options.
+
+ - Added the --copy-dest option, which works like --link-dest except
+ that it includes copies of identical files.
+
+ - Added support for specifying multiple --compare-dest, --copy-dest, or
+ --link-dest options, but only of a single type. (Promoted from the
+ patches dir and enhanced.)
+
+ - Added the --max-size option. (Promoted from the patches dir.)
+
+ - The daemon-mode options were separated from the normal rsync options
+ so that they can't be mixed together. This makes it impossible to
+ start a daemon that had improper default option values that could
+ cause problems (such as a hang or an abort) when a client connects.
+
+ - The --bwlimit option may now be used in combination with --daemon
+ to specify both a default value for the daemon side and a value
+ that cannot be exceeded by a user-specified --bwlimit option.
+
+ - Added the "port" parameter to the rsyncd.conf file. (Promoted from
+ the patches dir.) Also added "address".
+
+ - In _exit_cleanup(): when we are exiting with a partially-received
+ file, we now flush any data in the write-cache before closing the
+ partial file.
+
+ - The --inplace support was enhanced to work with --compare-dest,
+ --link-dest, and (the new) --copy-dest options.
+
+ - Added the --dirs (-d) option for an easier way to copy directories
+ without recursion.
+
+ - Added the --list-only option which is mainly a way for the client to
+ put the server into listing mode without needing to resort to any
+ option kluges (e.g. the age-old use of "-r --exclude="/*/*" for a
+ non-recursive listing). This option is used automatically when a
+ modern rsync speaks to a modern daemon, but may also be specified
+ manually if you want to force the use of the --list-only option over
+ a remote-shell connection.
+
+ - Added the --omit-dir-times (-O) option which will avoid updating the
+ modified time for directories when --times was specified. This
+ option will avoid an extra pass through the file-list at the end of
+ the transfer (to tweak all the directory times), which can result in
+ an appreciable speedup for a really large transfer.
+
+ - Added the --filter (-f) option and its helper option, -F. Filter
+ rules are an extension to the existing include/exclude handling
+ that also supports nested filter files as well as per-directory
+ filter files (like .cvsignore, but with full filter-rule parsing).
+ This new option was chosen in order to ensure that all existing
+ include/exclude processing remained 100% compatible with older
+ versions.
+
+ - Added the --delay-updates option that puts all updated files into
+ a temporary directory (by default ".~tmp~", but settable via the
+ --partial-dir=DIR option) until the end of the transfer. This
+ makes the updates a little more atomic for a large transfer.
+
+ - If rsync is put into the background, any output from --progress is
+ reduced.
+
+ SUPPORT FILES:
+
+ - Added support/atomic-rsync -- a perl script that will transfer some
+ files using rsync, and then move the updated files into place all at
+ once at the end of the transfer. Only works when pulling, and uses
+ --link-dest and a parallel hierarchy of files to effect its update.
+
+ - Added support/mnt-excl that takes the /proc/mounts file and
+ translates it into a set of excludes that will exclude all mount
+ points (even mapped mounts to the same disk). The excludes are made
+ relative to the specified source dir and properly anchored.
+
+ - Added support/savetransfer.c -- a C program that can make a copy of
+ all the data that flows over the wire. This lets you test for data
+ corruption (by saving the data on both the sending side and the
+ receiving side) or provides a way to help debug a protocol error.
+
+ - Added support/rrsync -- my version of Joe Smith's restricted rsync
+ perl script. This helps to ensure that only certain rsync commands
+ can be run by an ssh invocation.
- - Use rsyserr() in the various places that were still calling
- rprintf() with strerror() as an arg.
+ INTERNAL:
- BUILD CHANGES:
+ - Added better checking of the checksum-header values that come over
+ the socket.
- - Added a "gen" target to rebuild most of the generated files,
- including configure, config.h.in, the man pages, and proto.h.
+ - Merged the various delete-file functions into a single function so
+ that it is easier to maintain.
- - If "make proto" doesn't find some changes in the prototypes, the
- proto.h file is left untouched (its timestamp used to be updated).
+ - Improved the type of some variables (particularly blocksize vars) for
+ consistency and proper size.
- DEVELOPER RELATED:
+ - Got rid of the uint64 type (which we didn't need).
+
+ BUILD CHANGES:
- - The scripts in the testsuite dir were cleaned up a bit.
+ - Handle an operating system that use mkdev() in place of makedev().
+ - Improved configure to better handle cross-compiling.