-NEWS for rsync 2.6.1 (UNRELEASED)
-Protocol: 27 (unchanged)
-Changes since 2.6.0:
-
- ENHANCEMENTS:
-
- * Lower memory use and more optimal transfer of data over
- the socket (see the INTERNAL section for details).
-
- * The RSYNC_PROXY environment variable can now contain a
- "USER:PASS@" prefix before the "HOST:PORT" information.
- (Bardur Arantsson)
-
- * The --progress output now mentions how far along in the
- transfer we are, including both a count of files transferred
- and a percentage of the total file-count that we're processed.
-
- * The configure script now accepts --with-rsyncd-conf=PATH
- to override the default value of the /etc/rsyncd.conf file.
+NEWS for rsync 2.6.3 (UNRELEASED)
+Protocol: 28 (unchanged)
+Changes since 2.6.2:
BUG FIXES:
- * When -x (--one-file-system) is combined with -L (--copy-links)
- or --copy-unsafe-links, no symlinked files are skipped, even
- if the referant file is on a different filesystem.
-
- * The --link-dest code now works properly for a non-root user
- when the UIDs of the source and destination differ and -o was
- specified, and when the group of the source can't be used on
- the destination and -g was specified. (Wayne Davison)
-
- * Fixed a bug in the handling of -H (hard-links) that might
- cause the expanded PATH/NAME value of the current item to
- get overwritten (due to an expanded-name caching bug).
- (Wayne Davison)
-
- * We now reset the "new data has been sent" flag at the start
- of each file we send. This makes sure that an interrupted
- transfer with the --partial option set doesn't keep a shorter
- temp file than the current basis file when no new data has been
- transfered over the wire for that file. (Wayne Davison)
-
- * Fixed a byte-order problem in --batch-mode on big-endian
- machines. (Jay Fenlason)
-
- * Fixed configure bug when running "./configure --disable-ipv6".
- (Wayne Davison)
-
- * Fixed "make test" bug when build dir is not the source dir.
-
- * When using --cvs-exclude, the exclude items we get from a
- directory's .cvsignore file once again only affect that one
- directory (and not all following directories too).
-
- * When transferring a file that has group 0 with -g specified
- (typically via -a) and not enough privs to retain the group,
- rsync no longer complains about "chown" failing.
-
- * When specifying the USER@HOST: prefix for a file, the USER
- part can now contain an '@', if needed (i.e. the last '@'
- is used to find the HOST, not the first).
-
- * Fixed some bugs in the handling of group IDs for non-root
- users: (1) It properly handles a group that the sender didn't
- have a name for (it would previously skip changing the group
- on any files in that group). (2) If --numeric-ids is used,
- rsync no longer attempts to set groups that the user doesn't
- have the permission to set.
-
- * Fixed the "refuse options" setting in the rsyncd.conf file.
-
- * Rsync no longer discards a double-slash at the start of a filename
- when trying to open the file. It also no longer constructs names
- that start with a double slash (unless the user supplied both).
-
- * Fixed compilation problem on Tru64 Unix (having to do with
- sockaddr.sa_len and sockaddr.sin_len).
-
- INTERNAL:
-
- * Most of the I/O is now buffered, which results in a pretty
- large speedup when running under MS Windows. (Craig Barratt)
-
- * Optimizations to the name-handling/comparing code have made
- some significant reductions in user-CPU time for large file
- sets. (Wayne Davison)
-
- * Some variable-type cleanup that makes the code more consistent.
- (Wayne Davison)
+ - Fixed a crash bug that might appear when --delete was used and
+ multiple source directories were specified.
- * Reduced memory requirements of hard link preservation.
- (J.W. Schultz)
+ - The --backup code no longer attempts to create some directories
+ over and over again (generating warnings along the way).
- * Implemented a new algorithm for hard-link handling that speeds
- up the code significantly. (J.W. Schultz and Wayne Davison)
+ - Fixed a bug in the reading of the secrets file (by the daemon) and
+ the password file (by the client): the files no longer need to be
+ terminated by a newline for their content to be read in.
- * The --hard-link option now uses the first existing file in the
- group of linked files as the basis for the transfer. This
- prevents the sub-optimal transfer of a file's data when a new
- hardlink is added on the sending side and it sorts alphabetically
- earlier in the list than the files that are already present on the
- receiving side.
+ - If a file has a read error on the sending side, the receiver will
+ no longer keep the resulting file unless the --partial option was
+ specified. (Note: both sides must be running 2.6.3 for this to
+ work -- older receivers always keep the file, and older senders
+ don't tell the receiver that the file was not read correctly.)
- * Dropped support for protocol versions less than 20
- (2.3.0 released 15 Mar 1999) and activated warnings for
- protocols less than 25 (2.5.0 released 23 Aug 2001)
- (Wayne Davison and J.W. Schultz, severally)
+ - If a file gets resent in a single transfer and the --backup option
+ is enabled, rsync no longer performs a duplicate backup (losing the
+ original file in the process).
- * More optimal data transmission for --hard-links (protocol 28).
+ - Fixed an age-old crash problem with --read-batch on a local copy
+ (rsync was improperly assuming --whole-file for the local copy).
- * More optimal data transmission for --checksum (protocol 28).
+ - Files specified in the daemon's "exclude" or "exclude from" config
+ items are now excluded from being uploaded (assuming that the module
+ allows uploading at all) in addition to the old download exclusion.
- * Less memory is used when --checksum is specified.
+ - Got rid of a potential hang in the receiver when near the end of a
+ phase.
- * Less memory is used in the file list (a per-file savings).
+ - When using --backup without a --backup-dir, rsync no longer preserves
+ the modify time on directories. This avoids confusing NFS.
- * Changed hardlink info and file_struct + strings to use
- allocation pools. This reduces memory use for large
- filesets and permits freeing memory to the OS. (J.W. Schultz)
+ - When --copy-links (-L) is specified, we now output a separate error
+ for a symlink that has no referent instead of claiming that a file
+ "vanished".
- * The 2 pipes used between the receiver and generator processes
- (which are forked on the same machine) were reduced to 1 pipe
- and the protocol improved so that (1) it is now impossible to
- have the "redo" pipe fill up and hang rsync, and (2) trailing
- messages from the receiver don't get lost on their way through
- the generator over to the sender (the latter mainly affected
- hard-link messages). (Wayne Davison)
+ - Error messages from the daemon server's option-parsing (such as
+ refused options) now get sent back to the client (the server used
+ to just exit because the socket wasn't in the right state to send
+ the message).
- * The reading & writing of the file list in batch-mode is now
- handled by the same code that sends & receives the list over
- the wire. This makes it much easier to maintain.
+ - Most errors that occur during a daemon transfer are now returned to
+ the user in addition to being logged (some messages are intended to
+ be daemon-only).
- * Optimized the -x (--one-file-system) flag's handling of any
- mount-point directories we encounter (it no longer scans the
- contents of the mount-point dirs, just to throw away the data).
-
- * Improved the internal uid/gid code to be more portable and
- a little more optimized.
-
-\f
-NEWS for rsync 2.6.0 (1 Jan 2004)
-Protocol: 27 (changed)
-Changes since 2.5.7:
+ - Fixed a bug in the daemon authentication code when using one of the
+ batch-processing options.
ENHANCEMENTS:
- * "ssh" is now the default remote shell for rsync. If you want to
- change this, configure like this: "./configure --with-rsh=rsh".
-
- * Added --files-from, --no-relative, --no-implied-dirs, and --from0.
- Note that --from0 affects the line-ending character for all the
- files read by the --*-from options. (Wayne Davison)
-
- * Length of csum2 is now per-file starting with protocol version
- 27. (J.W. Schultz)
-
- * Per-file dynamic block size is now sqrt(file length). The
- per-file checksum size is determined according to an algorithm
- provided by Donovan Baarda which reduces the probability of rsync
- algorithm corrupting data and falling back using the whole md4
- checksums. (J.W. Schultz, Donovan Baarda)
-
- * The --stats option no longer includes the (debug) malloc summary
- unless the verbose option was specified at least twice.
-
- * Added a new error/warning code for when files vanish from the
- sending side. Made vanished source files not interfere with the
- file-deletion pass when --delete-after was specified.
-
- * Various trailing-info sections are now preceded by a newline.
-
- BUG FIXES:
-
- * Fixed several exclude/include matching bugs when using wild-cards.
- This has a several user-visible effects, all of which make the
- matching more consistent and intuitive. This should hopefully not
- cause anyone problems since it makes the matching work more like
- what people are expecting. (Wayne Davison)
-
- - A pattern with a "**" no longer causes a "*" to match slashes.
- For example, with "/*/foo/**", "foo" must be 2 levels deep.
- [If your string has BOTH "*" and "**" wildcards, changing the
- "*" wildcards to "**" will provide the old behavior in all
- versions.]
+ - Added --keep-dirlinks (-K), which allows you to symlink a directory
+ onto another patition on the receiving side and have rsync treat it
+ as matching a normal directory from the sender.
- - "**/foo" now matches at the base of the transfer (like /foo
- does). [Use "/**/foo" to get the old behavior in all versions.]
+ - Added the "write only" option to the daemon's config file.
- - A non-anchored wildcard term floats to match beyond the base of
- the transfer. E.g. "CVS/R*" matches at the end of the path,
- just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*"
- to get the old behavior in all versions.]
+ - Added long-option names for -4 and -6 (namely --ipv4 and --ipv6)
+ and documented all these options in the man page.
- - Including a "**" in the match term causes it to be matched
- against the entire path, not just the name portion, even if
- there aren't any interior slashes in the term. E.g. "foo**bar"
- would exclude "/path/foo-bar" (just like before) as well as
- "/foo-path/baz-bar" (unlike before). [Use "foo*bar" to get the
- old behavior in all versions.]
+ - If the daemon get an address-in-use error starting up, we sometimes
+ suggest that the user specify --ipv4 or --ipv6 to work around their
+ buggy socket implementation.
- * The exclude list specified in the daemon's config file is now
- properly applied to the pulled items no matter how deep the
- user's file-args are in the source tree. (Wayne Davison)
+ - Improved the handling of the --bwlimit option so that it's less
+ bursty, more accurate, and works properly over a larger range of
+ values.
- * For protocol version >= 27, mdfour_tail() is called when the
- block size (including checksum_seed) is a multiple of 64.
- Previously it was not called, giving the wrong MD4 checksum.
- (Craig Barratt)
+ - The rsync daemon-over-ssh code now looks for SSH_CONNECTION and
+ SSH2_CLIENT in addition to SSH_CLIENT to figure out the IP address.
- * For protocol version >= 27, a 64 bit bit counter is used in
- mdfour.c as required by the RFC. Previously only a 32 bit bit
- counter was used, causing incorrect MD4 file checksums for
- file sizes >= 512MB - 4. (Craig Barratt)
+ - Added the --checksum-seed=N option for advanced users.
- * Fixed a crash bug when interacting with older rsync versions and
- multiple files of the same name are destined for the same dir.
- (Wayne Davison)
-
- * Keep tmp names from overflowing MAXPATHLEN.
-
- * Make --link-dest honor the absence of -p, -o, and -g.
-
- * Made rsync treat a trailing slash in the destination in a more
- consistent manner.
-
- * Fixed file I/O error detection. (John Van Essen)
-
- * Fixed bogus "malformed address {hostname}" message in rsyncd log
- when checking IP address against hostnames from "hosts allow"
- and "hosts deny" parameters in config file.
-
- * Print heap statistics when verbose >= 2 instead of when >= 1.
-
- * Fixed a compression (-z) bug when syncing a mostly-matching file
- that contains already-compressed data. (Yasuoka Masahiko and
- Wayne Davison)
-
- * Fixed a bug in the --backup code that could cause deleted files
- to not get backed up.
-
- * When the backup code makes new directories, create them with mode
- 0700 instead of 0755 (since the directory permissions in the
- backup tree are not yet copied from the main tree).
+ INTERNAL:
- * Call setgroups() in a more portable manner.
+ - Some cleanup in the exclude code has saved some per-exclude memory
+ and made the code easier to maintain.
- * Improved file-related error messages to better indicate exactly
- what pathname failed. (Wayne Davison)
+ - Use rsyserr() in the various places that were still calling
+ rprintf() with strerror() as an arg.
- * Fixed some bugs in the handling of --delete and --exclude when
- using the --relative (-R) option. (Wayne Davison)
+ - If an rsync daemon is listening on multiple sockets (to handle both
+ IPv4 and IPv6 to a single port), we now close all the unneeded file
+ handles after we accept a connecton (we used to close just one of
+ them).
- * Fixed bug that prevented regular files from replacing
- special files and caused a directory in --link-dest or
- --compare-dest to block the creation of a file with the
- same path. A directory still cannot be replaced by a
- regular file unless --delete specified. (J.W. Schultz)
+ BUILD CHANGES:
- * Detect and report when open or opendir succeed but read and
- readdir fail caused by network filesystem issues and truncated
- files. (David Norwood, Michael Brown, J.W. Schultz)
+ - Added a "gen" target to rebuild most of the generated files,
+ including configure, config.h.in, the man pages, and proto.h.
- * Added a fix that should give ssh time to restore the tty settings
- if the user presses Ctrl-C at an ssh password prompt.
+ - If "make proto" doesn't find some changes in the prototypes, the
+ proto.h file is left untouched (its timestamp used to always be
+ updated).
- INTERNAL:
+ - The variable $STRIP (that is optionally set by the install-strip
+ target's rule) was changed to $INSTALL_STRIP because some systems
+ have $STRIP set in the environment.
- * Eliminated vestigial support for old versions that we stopped
- supporting. (J.W. Schultz)
+ DEVELOPER RELATED:
- * Simplified some of the option-parsing code. (Wayne Davison)
+ - The scripts in the testsuite dir were cleaned up a bit.
- * Some cleanup made to the exclude code, as well as some new
- defines added to enhance readability. (Wayne Davison)
+ - Some new diffs were added to the patches dir, and some accepted
+ ones were removed.
- * Changed the protocol-version code so that it can interact at a
- lower protocol level than the maximum supported by both sides.
- Added an undocumented option, --protocol=N, to force the value
- we advertise to the other side (primarily for testing purposes).
- (Wayne Davison)