mailto(rsync-bugs@samba.org)
-manpage(rsync)(1)(22 Apr 2006)()()
+manpage(rsync)(1)(14 Oct 2006)()()
manpagename(rsync)(faster, flexible replacement for rcp)
manpagesynopsis()
Some of the additional features of rsync are:
-itemize(
+itemization(
it() support for copying links, devices, owners, groups, and permissions
it() exclude and exclude-from options similar to GNU tar
it() a CVS exclude mode for ignoring the same files that CVS would ignore
Using rsync in this way is the same as using it with a remote shell except
that:
-itemize(
+itemization(
it() you either use a double colon :: instead of a single colon to
separate the hostname from the path, or you use an rsync:// URL.
it() the first word of the "path" is actually a module name.
to the detailed description below for a complete description. verb(
-v, --verbose increase verbosity
-q, --quiet suppress non-error messages
+ --no-motd suppress daemon-mode MOTD (see caveat)
-c, --checksum skip based on checksum, not mod-time & size
-a, --archive archive mode; same as -rlptgoD (no -H)
--no-OPTION turn off an implied OPTION (e.g. --no-D)
-H, --hard-links preserve hard links
-p, --perms preserve permissions
-E, --executability preserve executability
- --chmod=CHMOD change destination permissions
+ --chmod=CHMOD affect file and/or directory permissions
-o, --owner preserve owner (super-user only)
-g, --group preserve group
--devices preserve device files (super-user only)
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
--version print version number
-(-h) --help show this help (see below for -h comment)
-)
+(-h) --help show this help (see below for -h comment))
Rsync can also be run as a daemon, in which case the following options are
accepted: verb(
-v, --verbose increase verbosity
-4, --ipv4 prefer IPv4
-6, --ipv6 prefer IPv6
- -h, --help show this help (if used after --daemon)
-)
+ -h, --help show this help (if used after --daemon))
manpageoptions()
from the remote server. This flag is useful when invoking rsync from
cron.
+dit(bf(--no-motd)) This option affects the information that is output
+by the client at the start of a daemon transfer. This suppresses the
+message-of-the-day (MOTD) text, but it also affects the list of modules
+that the daemon sends in response to the "rsync host::" request (due to
+a limitation in the rsync protocol), so omit this option if you want to
+request the list of modules from the deamon.
+
dit(bf(-I, --ignore-times)) Normally rsync will skip any files that are
already the same size and have the same modification time-stamp.
-This option turns off this "quick check" behavior.
+This option turns off this "quick check" behavior, causing all files to
+be updated.
dit(bf(--size-only)) Normally rsync will not transfer any files that are
already the same size and have the same modification time-stamp. With the
rule would never be reached).
dit(bf(--backup-dir=DIR)) In combination with the bf(--backup) option, this
-tells rsync to store all backups in the specified directory. This is
-very useful for incremental backups. You can additionally
+tells rsync to store all backups in the specified directory on the receiving
+side. This can be used for incremental backups. You can additionally
specify a backup suffix using the bf(--suffix) option
(otherwise the files backed up in the specified directory
will keep their original filenames).
When this option is em(off), permissions are set as follows:
-quote(itemize(
+quote(itemization(
it() Existing files (including updated files) retain their existing
permissions, though the bf(--executability) option might change just
the execute permission for the file.
executability differs from that of the corresponding source file, rsync
modifies the destination file's permissions as follows:
-quote(itemize(
+quote(itemization(
it() To make a file non-executable, rsync turns off all its 'x'
permissions.
it() To make a file executable, rsync turns on each 'x' permission that
for standard input). It also tweaks the default behavior of rsync to make
transferring just the specified files and directories easier:
-quote(itemize(
+quote(itemization(
it() The bf(--relative) (bf(-R)) option is implied, which preserves the path
information that is specified for each item in the file (use
bf(--no-relative) or bf(--no-R) if you want to turn that off).
If a match is not found, a basis file from one of the em(DIR)s will be
selected to try to speed up the transfer.
+Note that if you combine this option with bf(--ignore-times), rsync will not
+link any files together because it only links identical files together as a
+substitute for transferring the file, never as an additional check after the
+file is updated.
+
If em(DIR) is a relative path, it is relative to the destination directory.
See also bf(--compare-dest) and bf(--copy-dest).
The update types that replace the bf(Y) are as follows:
-quote(itemize(
+quote(itemization(
it() A bf(<) means that a file is being transferred to the remote host
(sent).
it() A bf(>) means that a file is being transferred to the local host
The attribute that is associated with each letter is as follows:
-quote(itemize(
+quote(itemization(
it() A bf(c) means the checksum of the file is different and will be
updated by the file transfer (requires bf(--checksum)).
it() A bf(s) means the size of the file is different and will be updated
on the file transfer, allowing you to tell how effective the rsync
algorithm is for your data.
-The current statistics are as follows: quote(itemize(
+The current statistics are as follows: quote(itemization(
it() bf(Number of files) is the count of all "files" (in the generic
sense), which includes directories, symlinks, etc.
it() bf(Number of files transferred) is the count of normal files that
something to watch.
Implies bf(--verbose) if it wasn't already specified.
-When the file is transferring, the data looks like this:
+While rsync is transferring a regular file, it updates a progress line that
+looks like this:
verb( 782448 63% 110.64kB/s 0:00:04)
-This tells you the current file size, the percentage of the transfer that
-is complete, the current calculated file-completion rate (including both
-data over the wire and data being matched locally), and the estimated time
-remaining in this transfer.
+In this example, the receiver has reconstructed 782448 bytes or 63% of the
+sender's file, which is being reconstructed at a rate of 110.64 kilobytes
+per second, and the transfer will finish in 4 seconds if the current rate
+is maintained until the end.
-After a file is complete, the data looks like this:
+These statistics can be misleading if the incremental transfer algorithm is
+in use. For example, if the sender's file consists of the basis file
+followed by additional data, the reported rate will probably drop
+dramatically when the receiver gets to the literal data, and the transfer
+will probably take much longer to finish than the receiver estimated as it
+was finishing the matched part of the file.
-verb( 1238099 100% 146.38kB/s 0:00:08 (5, 57.1% of 396))
+When the file transfer finishes, rsync replaces the progress line with a
+summary line that looks like this:
-This tells you the final file size, that it's 100% complete, the final
-transfer rate for the file, the amount of elapsed time it took to transfer
-the file, and the addition of a total-transfer summary in parentheses.
-These additional numbers tell you how many files have been updated, and
-what percent of the total number of files has been scanned.
+verb( 1238099 100% 146.38kB/s 0:00:08 (xfer#5, to-check=169/396))
+
+In this example, the file was 1238099 bytes long in total, the average rate
+of transfer for the whole file was 146.38 kilobytes per second over the 8
+seconds that it took to complete, it was the 5th transfer of a regular file
+during the current rsync session, and there are 169 more files for the
+receiver to check (to see if they are up-to-date or not) remaining out of
+the 396 total files in the file-list.
dit(bf(-P)) The bf(-P) option is equivalent to bf(--partial) bf(--progress). Its
purpose is to make it much easier to specify these two options for a long
the names of the files that are going to be transferred. These patterns
can take several forms:
-itemize(
+itemization(
it() if the pattern starts with a / then it is anchored to a
particular spot in the hierarchy of files, otherwise it is matched
against the end of the pathname. This is similar to a leading ^ in
Here are some examples of exclude/include matching:
-itemize(
+itemization(
it() "- *.o" would exclude all filenames matching *.o
it() "- /foo" would exclude a file (or directory) named foo in the
transfer-root directory
The following modifiers are accepted after a merge or dir-merge rule:
-itemize(
+itemization(
it() A bf(-) specifies that the file should consist of only exclude
patterns, with no other rule-parsing except for in-file comments.
it() A bf(+) specifies that the file should consist of only include
The following modifiers are accepted after a "+" or "-":
-itemize(
+itemization(
it() A "/" specifies that the include/exclude rule should be matched
against the absolute pathname of the current item. For example,
"-/ /etc/passwd" would exclude the passwd file any time the transfer
into the directory /bdest/dir. The differences between the two examples
reveals some of the flexibility you have in how you deal with batches:
-itemize(
+itemization(
it() The first example shows that the initial copy doesn't have to be
local -- you can push or pull data to/from a remote host using either the
remote-shell syntax or rsync daemon syntax, as desired.
manpagesection(VERSION)
-This man page is current for version 2.6.8 of rsync.
+This man page is current for version 2.6.9pre2 of rsync.
+
+manpagesection(INTERNAL OPTIONS)
+
+The options bf(--server) and bf(--sender) are used internally by rsync,
+and should never be typed by a user under normal circumstances. Some
+awareness of these options may be needed in certain scenarios, such as
+when setting up a login that can only run an rsync command. For instance,
+the support directory of the rsync distribution has an example script
+named rrsync (for restricted rsync) that can be used with a restricted
+ssh login.
manpagesection(CREDITS)