+NEWS for rsync 3.0.3 (29 Jun 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.2:
+
+ BUG FIXES:
+
+ - Fixed a wildcard matching problem in the daemon when a module has
+ "use chroot" enabled.
+
+ - Fixed a crash bug in the hard-link code.
+
+ - Fixed the sending of xattr directory information when the code finds a
+ --link-dest or --copy-dest directory with unchanged xattrs -- the
+ destination directory now gets these unchanged xattrs properly applied.
+
+ - Fixed an xattr-sending glitch that could cause an "Internal abbrev"
+ error.
+
+ - Fixed the combination of --xattrs and --backup.
+
+ - The generator no longer allows a '.' dir to be excluded by a daemon-
+ exclude rule.
+
+ - Fixed deletion handling when copying a single, empty directory (with no
+ files) to a differently named, non-existent directory.
+
+ - Fixed the conversion of spaces into dashes in the %M log escape.
+
+ - Fixed several places in the code that were not returning the right
+ errno when a function failed.
+
+ - Fixed the backing up of a device or special file into a backup dir.
+
+ - Moved the setting of the socket options prior to the connect().
+
+ - If rsync exits in the middle of a --progress output, it now outputs a
+ newline to help prevent the progress line from being overwritten.
+
+ - Fixed a problem with how a destination path with a trailing slash or
+ a trailing dot-dir was compared against the daemon excludes.
+
+ - Fixed the sending of large (size > 16GB) files when talking to an older
+ rsync (protocols < 30): we now use a compatible block size limit.
+
+ - If a file's length is so huge that we overflow a checksum buffer count
+ (i.e. several hundred TB), warn the user and avoid sending an invalid
+ checksum struct over the wire.
+
+ - If a source arg is excluded, --relative no longer adds the excluded
+ arg's implied dirs to the transfer. This fix also made the exclude
+ check happen in the better place in the sending code.
+
+ - Use the overflow_exit() function for overflows, not out_of_memory().
+
+ - Improved the code to better handle a system that has only 32-bit file
+ offsets.
+
+ ENHANCEMENTS:
+
+ - The rsyncd.conf manpage now consistently refers to the parameters in
+ the daemon config file as "parameters".
+
+ - The description of the --inplace option was improved.
+
+ EXTRAS:
+
+ - Added a new script in the support directory, deny-rsync, which allows
+ an admin to (temporarily) replace the rsync command with a script that
+ sends an error message to the remote client via the rsync protocol.
+
+ DEVELOPER RELATED:
+
+ - Fixed a testcase failure if the tests are run as root and made some
+ compatibility improvements.
+
+ - Improved the daemon tests, including checking module comments, the
+ listing of files, and the ensuring that daemon excludes can't affect
+ a dot-dir arg.
+
+ - Improved some build rules for those that build in a separate directory
+ from the source, including better install rules for the man pages, and
+ the fixing of a proto.h-tstamp rule that could make the binaries get
+ rebuild without cause.
+
+ - Improved the testsuite to work around a problem with some utilities
+ (e.g. cp -p & touch -r) rounding sub-second timestamps.
+
+ - Ensure that the early patches don't cause any generated-file hunks to
+ bleed-over into patches that follow.
+
+\f
+NEWS for rsync 3.0.2 (8 Apr 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.1:
+
+ BUG FIXES:
+
+ - Fixed a potential buffer overflow in the xattr code.
+
+ ENHANCEMENTS:
+
+ - None.
+
+ DEVELOPER RELATED:
+
+ - The RPM spec file was improved to install more useful files.
+
+ - A few developer-oriented scripts were moved from the support dir
+ to the packaging dir.
+
+\f
+NEWS for rsync 3.0.1 (3 Apr 2008)
+Protocol: 30 (unchanged)
+Changes since 3.0.0:
+
+ NOTABLE CHANGES IN BEHAVIOR:
+
+ - Added the 'c'-flag to the itemizing of non-regular files so that the
+ itemized output doesn't get hidden if there were no attribute changes,
+ and also so that the itemizing of a --copy-links run will distinguish
+ between copying an identical non-regular file and the creation of a
+ revised version with a new value (e.g. a changed symlink referent, a
+ new device number, etc.).
+
+ BUG FIXES:
+
+ - Fixed a crash bug when a single-use rsync daemon (via remote shell) was
+ run without specifying a --config=FILE option.
+
+ - Fixed a crash when backing up a directory that has a default ACL.
+
+ - Fixed a bug in the handling of xattr values that could cause rsync to
+ not think that a file's extended attributes are up-to-date.
+
+ - Fixed the working of --fake-super with --link-dest and --xattrs.
+
+ - Fixed a hang when combining --dry-run with --remove-source-files.
+
+ - Fixed a bug with --iconv's handling of files that cannot be converted:
+ a failed name can no longer cause a transfer failure.
+
+ - Fixed the building of the rounding.h file on systems that need custom
+ CPPFLAGS to be used. Also improved the error reporting if the building
+ of rounding.h fails.
+
+ - Fixed the use of the --protect-args (-s) option when talking to a daemon.
+
+ - Fixed the --ignore-existing option's protection of files on the receiver
+ that are non-regular files on the sender (e.g. if a symlink or a dir on
+ the sender is trying to replace a file on the receiver). The reverse
+ protection (protecting a dir/symlink/device from being replaced by a
+ file) was already working.
+
+ - Fixed an assert failure if --hard-links is combined with an option that
+ can skip a file in a set of hard-linked files (i.e. --ignore-existing,
+ --append, etc.), without skipping all the files in the set.
+
+ - Avoid setting the modify time on a directory that already has the right
+ modify time set. This avoids tweaking the dir's ctime.
+
+ - Improved the daemon-exclude handling to do a better job of applying the
+ exclude rules to path entries. It also sends the user an error just as
+ if the files were actually missing (instead of silently ignoring the
+ user's args), and avoids sending the user the filter-action messages
+ for these non-user-initiated rules.
+
+ - Fixed some glitches with the dry-run code's missing-directory
+ handling, including a problem when combined with --fuzzy.
+
+ - Fixed some glitches with the skipped-directory handling.
+
+ - Fixed the 'T'-flag itemizing of symlinks when --time isn't preserved.
+
+ - Fixed a glitch in the itemizing of permissions with the -E option.
+
+ - The --append option's restricting of transfers to those that add data no
+ longer prevents the updating of non-content changes to otherwise up-to-
+ date files (i.e. those with the same content but differing permissions,
+ ownership, xattrs, etc.).
+
+ - Don't allow --fake-super to be specified with -XX (double --xattrs)
+ because the options conflict. If a daemon has "fake super" enabled,
+ it automatically downgrades a -XX request to -X.
+
+ - Fixed a couple bugs in the parsing of daemon-config excludes that could
+ make a floating exclude rule get treated as matching an absolute path.
+
+ - A daemon doesn't try to auto-refuse the "iconv" option if iconv-support
+ wasn't compiled in to the daemon (avoiding a warning in the logs).
+
+ - Fixed the inclusion of per-dir merge files from implied dirs.
+
+ - Fixed the support/rrsync script to work with the latest options that
+ rsync sends (including its flag-specifying use of -e to the server).
+
+ ENHANCEMENTS:
+
+ - Added the --old-dirs (--old-d) option to make it easier for a user to
+ ask for file-listings with older rsync versions (this is easier than
+ having to type "-r --exclude='/*/*'" manually).
+
+ - When getting an error while asking an older rsync daemon for a file
+ listing, rsync will try to notice if the error is a rejection of the
+ --dirs (-d) option and let the user know how to work around the issue.
+
+ - Added a few more --no-OPTION overrides.
+
+ - Improved the documentation of the --append option.
+
+ - Improved the documentation of the filter/exclude/include daemon
+ parameters.
+
+ INTERNAL:
+
+ - Fixed a couple minor bugs in the included popt library (ones which I
+ sent to the official popt project for inclusion in the 1.14 release).
+
+ - Fixed a stat() call that should have been do_stat() so that the proper
+ normal/64-bit stat() function gets called. (Was in an area that should
+ not have caused problems, though.)
+
+ - Changed the file-glob code to do a directory scan without using the
+ "glob" and "glob.h". This lets us do the globbing with less memory
+ churn, and also avoid adding daemon-excluded items to the returned
+ args.
+
+ DEVELOPER RELATED:
+
+ - The configure script tries to get the user's compiler to not warn about
+ unused function parameters if the build is not including one or more of
+ the ACL/xattrs/iconv features.
+
+ - The configure script now has better checks for figuring out if the
+ included popt code should be used or not.
+
+ - Fixed two testsuite glitches: avoid a failure if someone's "cd" command
+ outputs the current directory when cd-ing to a relative path, and made
+ the itemized test query how rsync was built to determine if it should
+ expect hard-linked symlinks or not.
+
+ - Updated the testsuite to verify that various bug fixes remain fixed.
+
+ - The RPM spec file was updated to have: (1) comments for how to use the
+ rsync-patch tar file, and (2) an /etc/xinetd.d/rsync file.
+
+ - Updated the build scripts to work with a revised FTP directory
+ structure.
+
+\f
NEWS for rsync 3.0.0 (1 Mar 2008)
Protocol: 30 (changed)
Changes since 2.6.9:
- Fixed rsync's ability to remove files that are not writable by the file's
owner when rsync is running as the same user.
+ - When transferring large files, the sender's hashtable of checksums is
+ kept at a more reasonable state of fullness (no more than 80% full) so
+ that the scanning of the hashtable will not bog down as the number of
+ blocks increases.
+
ENHANCEMENTS:
- A new incremental-recursion algorithm is now used when rsync is talking
--link-dest). This lets the user know when they specified a directory
that does not exist.
- - If we get an error setting the time on a symlink, we don't complain about
- it anymore (since some operating systems don't support that, and it's not
- that important).
+ - If we get an ENOSYS error setting the time on a symlink, we don't
+ complain about it anymore (for those systems that even support the
+ setting of the modify-time on a symlink).
- Protocol 30 now uses MD5 checksums instead of MD4.
\f
Partial Protocol History
RELEASE DATE VER. DATE OF COMMIT* PROTOCOL
- ?? ??? 2008 3.0.1 30
+ ?? ??? 2008 3.1.0 31 Aug 2008 31
+ 06 Sep 2008 3.0.4 30
+ 29 Jun 2008 3.0.3 30
+ 08 Apr 2008 3.0.2 30
+ 03 Apr 2008 3.0.1 30
01 Mar 2008 3.0.0 11 Nov 2006 30
06 Nov 2006 2.6.9 29
22 Apr 2006 2.6.8 29