-NEWS for rsync 2.6.7 (UNRELEASED)
-Protocol: 29 (unchanged)
-Changes since 2.6.6:
+NEWS for rsync 3.1.0 (UNRELEASED)
+Protocol: 31 (changed)
+Changes since 3.0.4:
+
+ OUTPUT CHANGES:
+
+ - Output numbers in 3-digit groups by default (e.g. 1,234,567). See the
+ --human-readable option for a way to turn it off. See also the daemon's
+ "log format" parameter and related command-line options (including
+ --out-format) for a modifier that can be used to request digit-grouping
+ or human-readable output in log escapes. (Note that log output is
+ unchanged by default.)
+
+ - The output of the --progress option has changed: the string "xfer" was
+ shortened to "xfr", and the string "to-check" was shortened to "to-chk",
+ both designed to make room for the (by default) wider display of file
+ size numbers without making the total line-length longer. Also, when
+ incremental recursion is enabled, the string "ir-chk" will be used
+ instead of "to-chk" up until the incremental-recursion scan is done,
+ letting you know that the value to check and the total value will still
+ be increasing as new files are found.
BUG FIXES:
- - Fixed a really old bug that caused --checksum (-c) to checksum all the
- files during the delete scan!
+ - Changed the way --progress overwrites its prior output in order to make
+ it nearly impossible for the progress to get overwritten by an error.
- - Made hard-links work with symlinks and devices again.
-
- - If a device-file/special-file changes permissions, rsync now updates the
- permissions without recreating the file.
-
- - If the user specifies a remote-host for both the source and destination,
- we now output a syntax error rather than trying to open the destination
- hostspec as a filename.
-
- - When --inplace creates a new destination file, rsync now creates it with
- permissions 0600 instead of 0000 -- this makes restarting possible when
- the transfer gets interrupted in the middle of sending a new file.
-
- - Reject the combination of --inplace and --sparse since the sparse-output
- algorithm doesn't work when overwriting existing data.
-
- - Fixed the directory name in the error that is output when pop_dir()
- fails.
-
- - Really fixed the parsing of a "!" entry in .cvsignore files this time.
-
- - If the generator gets a stat() error on a file, output it (this used to
- require at least -vv for the error to be seen).
-
- - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
- the exit status properly and generate a better error.
+ - An absolute-path filter rule (i.e. with a '/' modifier) no longer loses
+ its modifier when sending the filter rules to the remote rsync.
ENHANCEMENTS:
- - Added the --append option that makes rsync append data onto files
- that are longer on the source than the destination (this includes new
- files).
-
- - Added the --min-size=SIZE option to exclude small files from the
- transfer.
+ - Added the --remote-option=OPT (-M OPT) command-line option that is useful
+ for things like sending a remote --log-file=FILE or --fake-super option.
- - Added the --compress-level option to allow you to set how aggressive
- rsync's compression should be (the option implies --compress).
+ - Added the --info=FLAGS and --debug=FLAGS options to allow finer-grained
+ control over what is output. Added an extra type of --progress output
+ using --info=progress2.
- - Enhanced the parsing of the SIZE value for --min-size and --max-size.
+ - Added the --delete-missing-args and --ignore-missing-args options to
+ either delete or ignore user-specified files on the receiver that are
+ missing on the sender (normally the absence of user-specified files
+ generates an error).
- - If lutimes() and/or lchmod() are around, use them to allow the
- preservation of attributes on symlinks.
+ - Added a "T" (terabyte) category to the --human-readable size suffixes.
- - Added two config items to the rsyncd.conf parsing: "pre-xfer exec"
- and "post-xfer exec". These allow a command to be specified on a
- per-module basis that will be run before and/or after a daemon-mode
- transfer.
+ - Enhanced the --stats output: 1) to mention how many files were created
+ (protocol >= 28), 2) to mention how many files were deleted (new for
+ protocol 31), and 3) to follow the file-count, created-count, and
+ deleted-count with a break-out list of each count by type.
- - When using the --relative option, you can now insert a dot dir in
- the source path to indicate where the replication of the source dirs
- should start. For example, if you specify a source path of
- rsync://host/module/foo/bar/./baz/dir with -R, rsync would only
- replicate the "baz/dir" part of the source path (note: a trailing
- dot dir is unaffected unless it also has a trailing slash).
+ - Added the --usermap/--groupmap/--chown options for manipulating file
+ ownership during the copy.
- - Added some new --no-FOO options that make it easier to override
- unwanted implied or default options. For example, "-a --no-o" (aka
- "--archive --no-owner") can be used to turn off the preservation of
- file ownership that is implied by -a.
+ - Added the "%C" escape to the log-output handling, which will output the
+ MD5 checksum of any transferred file, or all files if --checksum was
+ specified (when protocol 30 or above is in effect).
- - Added the --chmod=MODE option that allows the destination permissions
- to be changed from the source permissions. E.g. --chmod=g+w,o-rwx
+ - Added the "reverse lookup" parameter to the rsync daemon config file to
+ allow reverse-DNS lookups to be disabled.
- - Allow the --temp-dir option to be specified when starting a daemon,
- which sets the default temporary directory for incoming files.
+ - Added a way for supplementary groups to be specified in the rsyncd.conf
+ file. Also made explicitly-set uid/gid values no longer ignored by a
+ daemon that was not run by a super-user.
- - If --delete is combined with --dirs without --recursive, rsync will
- now delete in any directory whose content is being synchronized.
+ - When replacing a non-dir with a symlink/hard-link/device/special-file,
+ the update should now be done in an atomic manner.
- - The file-count stats that are output by --progress were improved to
- better indicate what the numbers mean. For instance, the output:
- "(xfer#5, to-check=8383/9999)" indicates that this was transferred
- file #5, and we still need to check 8383 files out of 9999 total.
+ - When backing up a file, try to hard-link the file into place so that the
+ upcoming replacement of the destination file will be atomic.
- - Some minor documentation improvements.
+ EXTRAS:
- - Updated some diffs in the patches dir.
+ - Added an "instant-rsyncd" script to the support directory, which makes
+ it easy to configure a simple rsync daemon in the current directory.
- INTERNAL:
+ - Added the "mapfrom" and "mapto" scripts to the support directory, which
+ makes it easier to do user/group mapping in a local transfer based on
+ passwd/group files from another machine.
- - Some buffer sizes were expanded a bit, particularly on systems where
- MAXPATHLEN is overly small (e.g. cygwin).
-
- - If io_printf() tries to format more data than fits in the buffer, exit
- with an error instead of transmitting a truncated buffer.
+ DEVELOPER RELATED:
- - If a va_copy macro is defined, lib/snprintf.c will use it when defining
- the VA_COPY macro.
+ - The filter code received some refactoring to make it more extendable, to
+ read better, and do better sanity checking.
- - Reduced the amount of stack memory needed for each level of directory
- recursion by nearly MAXPATHLEN bytes.
+ - Added more conditional debug output.
- DEVELOPER RELATED:
+ - Really big numbers are now output using our own big-num routine rather
+ than casting them to a double and using a %.0f conversion.
- - Several diffs in the patches dir now use the proper --enable-FOO
- configure option instead of --with-FOO to turn on the inclusion of
- the newly patched feature.
+ - The pool_alloc library has received some minor improvements in alignment
+ handling.
+ - Added init_stat_x() function to avoid duplication of acl/xattr init code.