-NEWS for rsync 2.6.9 (unreleased)
-Protocol: 29 (unchanged)
-Changes since 2.6.8:
+NEWS for rsync 3.0.0 (UNRELEASED)
+Protocol: 30 (changed)
+Changes since 2.6.9:
+
+ NOTABLE CHANGES IN BEHAVIOR:
+
+ - The handling of implied directories when using --relative has changed to
+ send them as directories (e.g. no implied dir is ever sent as a symlink).
+ This avoids unexpected behavior and should not adversely affect most
+ people. If you're one of those rare individuals who relied upon having
+ an implied dir be duplicated as a symlink, you should specify the
+ transfer of the symlink and the transfer of the referent directory as
+ separate args. (See also --keep-dirlinks and --no-implied-dirs.)
+
+ - Requesting a remote file list without specifying -r (--recursive) now
+ sends the -d (--dirs) option to the remote rsync rather than sending -r
+ along with an extra exclude of /*/*. If the remote rsync does not
+ understand the -d option (i.e. it is 2.6.3 or older), you will need to
+ either turn off -d (--no-d), or specify -r --exclude='/*/*' manually.
BUG FIXES:
- - An rsync daemon that is receiving files with "use chroot = no" no longer
- sanitizes the symlink target strings. This means that each symlink's
- value will now be accepted (and thus returned) with its symlink info
- intact. Also, in order to keep things safe, any option that tells a
- non-chroot daemon to treat some symlinks as their referent (such as
- --copy-links or --keep-dirlinks) now manually checks the symlink chain
- to ensure that the symlinks do not try to escape past the top of the
- module's path. Both these changes make a non-chroot daemon behave the
- same as a chroot daemon with regard to symlinks, and also avoids a
- potential problem where a pre-existing symlink could have escaped the
- module's hierarchy.
-
- - Fixed a overzealous sanitizing bug in the handling of the --*-dest
- options (--link-dest, --copy-dest, and --compare-dest): if the copy's
- destination dir is deeper than the top of the module's path, these
- options now accept a safe number of ../ (parent-dir) references (since
- these options are relative to the destination dir). The old code
- incorrectly chopped off all "../" prefixes for these options, no matter
- how deep the destination directory was in the hierarchy.
-
- - Fixed a bug where a deferred info/error/log message could get sent
- directly to the sender instead of being handled by rwrite() in the
- generator. This fixes an "unexpected tag 3" fatal error, and should
- also fix a potential problem where a deferred info/error message from
- the receiver might bypass the log file and get sent only to the client
- process. (These problems could only affect an rsync daemon that was
- receiving files.)
-
- - Make sure that the --link-dest option can still do its job even when -I
- or --size-only is specified.
-
- - The daemon now calls more timezone-using functions prior to doing a
- chroot.
+ - Fixed the output of -ii when combined with one of the --*-dest options:
+ it now itemizes all the items, not just the changed ones.
+
+ - Made the output of all file types consistent when using a --*-dest
+ option. Prior versions would output too many creation events for
+ matching items.
+
+ - The code that waits for a child pid now handles being interrupted by a
+ signal. This fixes a problem with the pre-xfer exec function not being
+ able to get the exit status from the script.
+
+ - A negated filter rule (i.e. with a '!' modifier) no longer loses the
+ negation when sending the filter rules to the remote rsync.
+
+ - Fixed a problem with the --out-format (aka --log-format) option %f: it
+ no longer outputs superfluous directory info for a non-daemon rsync.
+
+ - Fixed a problem with -vv (double --verbose) and --stats when "pushing"
+ files (which includes local copies). Version 2.6.9 would complete the
+ copy, but exit with an error when the receiver output its memory stats.
+
+ - If --password-file is used on a non-daemon transfer, rsync now complains
+ and exits. This should help users figure out that they can't use this
+ option to control a remote shell's password prompt.
+
+ - Make sure that directory permissions of a newly-created destination
+ directory are handled right when --perms is left off.
+
+ - The itemized output of a newly-created destination directory is now
+ output as a creation event, not a change event.
+
+ - Improved --hard-link so that more corner cases are handled correctly
+ when combined with options such as --link-dest and/or --ignore-existing.
+
+ - The --append option no longer updates a file that has the same size.
+
+ - Fixed a bug when combining --backup and --backup-dir with --inplace:
+ any missing backup directories are now created.
+
+ - Fixed a bug when using --backup and --inplace with --whole-file or
+ --read-batch: backup files are actually created now.
+
+ - Starting up an extra copy of an rsync daemon will not clobber the pidfile
+ for the running daemon -- if the pidfile exists, the new daemon will exit
+ with an error.
+
+ - The daemon pidfile is checked and created sooner in the startup sequence.
+
+ - If a daemon module's "path" value is not an absolute pathname, the code
+ now makes it absolute internally (making it work properly).
ENHANCEMENTS:
- - ...
+ - A new incremental-recursion algorithm is now used when rsync is talking
+ to another 3.x version. This starts the transfer going more quickly
+ (before all the files have been found), and requires much less memory.
+ See the --recursive option in the manpage for some restrictions.
+
+ - Lowered memory use in the non-incremental-recursion algorithm for typical
+ option values (usually saving from 21-29 bytes per file).
+
+ - The default --delete algorithm is now --delete-during when talking to a
+ 3.x rsync. This is a faster scan than using --delete-before (which is
+ the default when talking to older rsync versions), and is compatible with
+ the new incremental recursion mode.
+
+ - Rsync now allows multiple remote-source args to be specified rather than
+ having to rely on a special space-splitting side-effect of the remote-
+ shell. Additional remote args must specify the same host or an empty one
+ (e.g. empty: :file1 or ::module/file2). This means that local use of
+ brace expansion now works: rsync -av host:dir/{f1,f2} .
+
+ - Added the --protect-args (-s) option, that tells rsync to send most of
+ the command-line args at the start of the transfer rather than as args
+ to the remote-shell command. This protects them from space-splitting,
+ and only interprets basic wildcard special shell characters (*?[).
+
+ - Added the --delete-delay option, which is a more efficient way to delete
+ files at the end of the transfer without needing a separate delete pass.
+
+ - Added the --acls (-A) option to preserve Access Control Lists. This is
+ an improved version of the prior patch that was available, and it even
+ supports OS X ACLs. If you need to have backward compatibility with old,
+ acl-patched versions of rsync, apply the acls.diff file from the patches
+ dir.
+
+ - Added the --xattrs (-X) option to preserver extended attributes. This is
+ an improved version of the prior patch that was available, and it even
+ supports OS X xattrs (which includes their resource fork data). If you
+ need to have backward compatibility with old, xattr-patched versions of
+ rsync, apply the xattrs.diff file from the patches dir.
+
+ - Added the --fake-super option that allows a non-super user to preserve
+ all attributes of a file by using a special extended-attribute idiom.
+ It even supports the storing of foreign ACL data on your backup server.
+ There is also an analogous "fake super" option for an rsync daemon.
+
+ - Added the --iconv option, which allows rsync to convert filenames from
+ one character-set to another during the transfer. The default is to make
+ this feature available as long as your system has iconv_open(). If
+ compilation fails, specify --disable-iconv to configure, and then
+ rebuild. If you want rsync to perform character-set conversions by
+ default, you can specify --enable-iconv=CONVERT_STRING with the default
+ value for the --iconv option that you wish to use. For example,
+ "--enable-iconv=." is a good choice. See the rsync manpage for an
+ explanation of the --iconv option's settings.
+
+ - Added the --skip-compress=LIST option to override the default list of
+ file suffixes that will not be compressed when using --compress.
+
+ - The daemon's default for "dont compress" was extended to include:
+ *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg
+ The matching routine was also optimized to run more quickly.
+
+ - The --max-delete option now outputs a warning if it skipped any file
+ deletions, including a count of how many deletions were skipped. (Older
+ versions just silently stopped deleting things.)
+
+ - You may specify --max-delete=0 to a 3.0.0 client to request that it warn
+ about extraneous files without deleting anything. If you're not sure
+ what version the client is, you can use the less-obvious --max-delete=-1,
+ as both old and new versions will treat that as the same request (though
+ older versions don't warn).
+
+ - The --hard-link option now uses less memory on both the sending and
+ receiving side for all protocol versions. For protocol 30, the use of a
+ hashtable on the sending side allows us to more efficiently convey to the
+ receiver what files are linked together. This reduces the amount of data
+ sent over the socket by a considerable margin (rather than adding more
+ data), and limits the in-memory storage of the device+inode information
+ to just the sending side for the new protocol 30, or to the receiving
+ side when speaking an older protocol (note that older rsync versions kept
+ the device+inode information on both sides).
+
+ - The filter rules now support a perishable ("p") modifier that marks rules
+ that should not have an effect in a directory that is being deleted. e.g.
+ -f '-p .svn/' would only affect "live" .svn directories.
+
+ - If we get an error setting the time on a symlink, we don't complain about
+ it anymore (since some operating systems don't support that, and it's not
+ that important).
+
+ - Protocol 30 now uses MD5 checksums instead of MD4.
+
+ - Changed the --append option to not checksum the existing data in the
+ destination file, which speeds up file appending.
+
+ - Added the --append-verify option, which works like the older --append
+ option (verifying the existing data in the destination file). For
+ compatibility with older rsync versions, any use of --append that is
+ talking protocol 29 or older will revert to the --append-verify method.
+
+ - Documented and extended the support for the RSYNC_CONNECT_PROG variable
+ that can be used to enhance the client side of a daemon connection.
+
+ - Improved the dashes and double-quotes in the nroff manpage output.
+
+ - We now support a lot more --no-OPTION override options.
+
+ INTERNAL:
+
+ - The file-list sorting algorithm now uses a sort that keeps any same-
+ named items in the same order as they were specified. This allows
+ rsync to always ensure that the first of the duplicates is the one
+ that will be included in the copy. The new sort was also faster
+ than the glibc version of qsort() and mergesort() in my testing.
+
+ - Rsync now supports the transfer of 64-bit timestamps (time_t values).
+
+ - Fixed a build problem with older (2.x) versions of gcc.
+
+ - Added some isType() functions that make dealing with signed characters
+ easier without forcing variables via casts.
+
+ - Changed strcat/strcpy/sprintf function calls to use safer versions.
+
+ - Upgraded the included popt version to 1.10.2 and improved its use of
+ string-handling functions.
+
+ - Added missing prototypes for compatibility functions from the lib dir.
+
+ - Configure determines if iconv() has a const arg, allowing us to avoid a
+ compiler warning.
+
+ - Made the sending of some numbers more efficient for protocol 30.
+
+ - Make sure that a daemon process doesn't mind if the client was weird and
+ omitted the --server option.
+
+ - Improved the use of "const" on pointers.
+
+ - Improved J.W.'s pool_alloc routines to add a way of freeing older
+ sections of a pool's memory.
DEVELOPER RELATED:
- - The acls.diff and xattrs.diff patches have received a bunch of work to
- make them much closer to being acceptable in the main distribution.
+ - Rsync is now licensed under the GPLv3 or later.
- - Updated config.guess and config.sub to their 2006-02-23 version.
+ - When running the tests, we now put our per-test temp dirs into a sub-
+ directory named testtmp (which is created, if missing). This allows
+ someone to symlink the testtmp directory to another filesystem (which is
+ useful if the build dir's filesystem does not support ACLs and xattrs,
+ but another file system does).
- - Updated various files to include the latest FSF address and to have
- consistent opening comments.
+ - Rsync now has a way of handling protocol-version changes during the
+ development of a new protocol version. This causes any out-of-sync
+ versions to speak an older protocol rather than fail in a cryptic manner.
+ This addition makes it safe to deploy a pre-release version that may
+ interact with the public. This new exchange of sub-version info does not
+ interfere with the {MIN,MAX}_PROTOCOL_VERSION checking algorithm (which
+ does not have enough range to allow the main protocol number to be
+ incremented for every minor tweak in that happens during development).