#define BLOCK_SIZE 700
#define RSYNC_RSH_ENV "RSYNC_RSH"
+#define RSYNC_RSH_IO_ENV "RSYNC_RSH_IO"
#define RSYNC_NAME "rsync"
#define RSYNCD_SYSCONF "/etc/rsyncd.conf"
#define SAME_TIME (1<<7)
/* update this if you make incompatible changes */
-#define PROTOCOL_VERSION 26
+#define PROTOCOL_VERSION 27
/* We refuse to interoperate with versions that are not in this range.
* Note that we assume we'll work with later versions: the onus is on
* the old protocol will become the minimum and
* compatibility code removed.
*
- * There are two possible explanations for the limit at thirty: either
- * to allow new major-rev versions that do not interoperate with us,
- * and (more likely) so that we can detect an attempt to connect rsync
- * to a non-rsync server, which is unlikely to begin by sending a byte
- * between 15 and 30. */
-#define MIN_PROTOCOL_VERSION 15
+ * There are two possible explanations for the limit at
+ * MAX_PROTOCOL_VERSION: either to allow new major-rev versions that
+ * do not interoperate with us, and (more likely) so that we can
+ * detect an attempt to connect rsync to a non-rsync server, which is
+ * unlikely to begin by sending a byte between MIN_PROTOCL_VERSION and
+ * MAX_PROTOCOL_VERSION. */
+
+#define MIN_PROTOCOL_VERSION 17
#define OLD_PROTOCOL_VERSION 20
#define MAX_PROTOCOL_VERSION 40
#define MAX_MAP_SIZE (256*1024)
#define IO_BUFFER_SIZE (4092)
+#define IOERR_GENERAL (1<<0) /* For backward compatibility, this must == 1 */
+#define IOERR_VANISHED (1<<1)
+
#define MAX_ARGS 1000
#define MPLEX_BASE 7
+#define NO_EXCLUDES 0
+#define SERVER_EXCLUDES 1
+#define ALL_EXCLUDES 2
+
+#define MISSING_OK 0
+#define MISSING_FATAL 1
+
+#define ADD_INCLUDE 1
+#define ADD_EXCLUDE 0
+
/* Log values. I *think* what these mean is: FLOG goes to the server
* logfile; FERROR and FINFO try to end up on the client, with
* different levels of filtering. */
#include "config.h"
-/* The default RSYNC_RSH is always set in config.h, either to "remsh",
- * "rsh", or otherwise something specified by the user. HAVE_REMSH
- * controls parameter munging for HP/UX, etc. */
+/* The default RSYNC_RSH is always set in config.h. */
#include <sys/types.h>
#include <stdlib.h>
#endif
+#if defined(HAVE_MALLOC_H) && (defined(HAVE_MALLINFO) || !defined(HAVE_STDLIB_H))
+#include <malloc.h>
+#endif
+
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include <string.h>
#endif
-#ifdef HAVE_MALLOC_H
-#include <malloc.h>
-#endif
-
#ifdef TIME_WITH_SYS_TIME
#include <sys/time.h>
#include <time.h>
#endif
#endif
-#ifdef HAVE_FNMATCH
-#include <fnmatch.h>
-#else
-#include "lib/fnmatch.h"
-#endif
-
#ifdef HAVE_GLOB_H
#include <glob.h>
#endif
-#ifdef HAVE_MALLOC_H
-# include <malloc.h>
-#endif
-
/* these are needed for the uid/gid mapping code */
#include <pwd.h>
#include <grp.h>
#define NO_INT64
#endif
+#if (SIZEOF_LONG == 8)
+#define uint64 unsigned long
+#elif (SIZEOF_INT == 8)
+#define uint64 unsigned int
+#elif HAVE_LONGLONG
+#define uint64 unsigned long long
+#else
+/* As long as it gets... */
+#define uint64 unsigned off_t
+#endif
+
/* Starting from protocol version 26, we always use 64-bit
* ino_t and dev_t internally, even if this platform does not
* allow files to have 64-bit inums. That's because the
* cope with platforms on which this is an unsigned int or even a
* struct. Later.
*/
-#define INO64_T int64
-#define DEV64_T int64
+#define INO64_T uint64
+#define DEV64_T uint64
#ifndef MIN
#define MIN(a,b) ((a)<(b)?(a):(b))
/* the length of the md4 checksum */
#define MD4_SUM_LENGTH 16
#define SUM_LENGTH 16
+#define SHORT_SUM_LENGTH 2
+#define BLOCKSUM_BIAS 10
#ifndef MAXPATHLEN
#define MAXPATHLEN 1024
#endif
+#ifndef NAME_MAX
+#define NAME_MAX 255
+#endif
+
#ifndef INADDR_NONE
#define INADDR_NONE 0xffffffff
#endif
OFF_T flength; /**< total file length */
size_t count; /**< how many chunks */
size_t remainder; /**< flength % block_length */
- size_t n; /**< block_length */
+ size_t blength; /**< block_length */
+ size_t s2length; /**< sum2_length */
struct sum_buf *sums; /**< points to info for each chunk */
};
struct map_struct {
- char *p;
- int fd,p_size,p_len;
- OFF_T file_size, p_offset, p_fd_offset;
+ char *p; /* Window pointer */
+ int fd; /* File Descriptor */
+ int p_size; /* Window size at allocation */
+ int p_len; /* Window size after fill */
+ /* p_size and p_len could be
+ * consolodated by using a local
+ * variable in map_ptr() */
+ int status; /* first errno from read errors */
+ OFF_T file_size; /* File size (from stat) */
+ OFF_T p_offset; /* Window start */
+ OFF_T p_fd_offset; /* offset of cursor in fd ala lseek */
};
+#define MATCHFLG_WILD (1<<0) /* pattern has '*', '[', and/or '?' */
+#define MATCHFLG_WILD2 (1<<1) /* pattern has '**' */
+#define MATCHFLG_WILD2_PREFIX (1<<2) /* pattern starts with '**' */
+#define MATCHFLG_ABS_PATH (1<<3) /* path-match on absolute path */
struct exclude_struct {
char *pattern;
- int regular_exp;
- int fnmatch_flags;
+ int match_flags;
int include;
int directory;
- int local;
+ int slash_cnt;
};
struct stats {
#include "byteorder.h"
#include "lib/mdfour.h"
+#include "lib/wildmatch.h"
#include "lib/permstring.h"
#include "lib/addrinfo.h"
int vasprintf(char **ptr, const char *format, va_list ap);
#endif
-#if !defined(HAVE_VSNPRINTF) && !defined(HAVE_C99_VSNPRINTF)
-int vsnprintf (char *str, size_t count, const char *fmt, va_list args);
+#if !defined(HAVE_VSNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#define vsnprintf rsync_vsnprintf
+int vsnprintf(char *str, size_t count, const char *fmt, va_list args);
#endif
-#if !defined(HAVE_SNPRINTF) && !defined(HAVE_C99_VSNPRINTF)
+#if !defined(HAVE_SNPRINTF) || !defined(HAVE_C99_VSNPRINTF)
+#define snprintf rsync_snprintf
int snprintf(char *str,size_t count,const char *fmt,...);
#endif
#endif
+/* Convenient wrappers for malloc and realloc. Use them. */
+#define new(type) ((type *)malloc(sizeof(type)))
+#define new_array(type, num) ((type *)_new_array(sizeof(type), (num)))
+#define realloc_array(ptr, type, num) ((type *)_realloc_array((ptr), sizeof(type), (num)))
/* use magic gcc attributes to catch format errors */
void rprintf(enum logcode , const char *, ...)
#define inet_ntoa rep_inet_ntoa
#endif
+/* Make sure that the O_BINARY flag is defined. */
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
#ifndef HAVE_STRLCPY
size_t strlcpy(char *d, const char *s, size_t bufsize);