+NEWS for rsync 2.6.6 (28 Jul 2005)
+Protocol: 29 (unchanged)
+Changes since 2.6.5:
+
+ SECURITY FIXES:
+
+ - The zlib code was upgraded to version 1.2.3 in order to make it more
+ secure. While the widely-publicized security problem in zlib 1.2.2 did
+ not affect rsync, another security problem surfaced that affects rsync's
+ zlib 1.1.4.
+
+ BUG FIXES:
+
+ - The setting of flist->high in clean_flist() was wrong for an empty list.
+ This could cause flist_find() to crash in certain rare circumstances
+ (e.g. if just the right directory setup was around when --fuzzy was
+ combined with --link-dest).
+
+ - The outputting of hard-linked files when verbosity was > 1 was not right:
+ (1) Without -i it would output the name of each hard-linked file as
+ though it had been changed; it now outputs a "is hard linked" message for
+ the file. (2) With -i it would output all dots for the unchanged
+ attributes of a hard-link; it now changes those dots to spaces, as is
+ done for other totally unchanged items.
+
+ - When backing up a changed symlink or device, get rid of any old backup
+ item so that we don't get an "already exists" error.
+
+ - A couple places that were comparing a local and a remote modification-
+ time were not honoring the --modify-window option.
+
+ - Fixed a bug where the 'p' (permissions) itemized-changes flag might get
+ set too often (if some non-significant mode bits differed).
+
+ - Fixed a really old, minor bug that could cause rsync to warn about being
+ unable to mkdir() a path that ends in "/." because it just created the
+ directory (required --relative, --no-implied-dirs, a source path that
+ ended in either a trailing slash or a trailing "/.", and a non-existing
+ destination dir to tickle the bug in a recent version).
+
+ ENHANCEMENTS:
+
+ - Made the "max verbosity" setting in the rsyncd.conf file settable on a
+ per-module basis (which now matches the documentation).
+
+ - The support/rrsync script has been upgraded to verify the args of options
+ that take args (instead of rejecting any such options). The script was
+ also changed to try to be more secure and to fix a problem in the parsing
+ of a pull operation that has multiple sources.
+
+ - Improved the documentation that explains the difference between a
+ normal daemon transfer and a daemon-over remote-shell transfer.
+
+ - Some of the diffs supplied in the patches dir were fixed and/or
+ improved.
+
+ BUILD CHANGES:
+
+ - Made configure define NOBODY_USER (currently hard-wired to "nobody") and
+ NOBODY_GROUP (set to either "nobody" or "nogroup" depending on what we
+ find in the /etc/group file).
+
+ - Added a test to the test suite, itemized.test, that tests the output of
+ -i (log-format w/%i) and some double-verbose messages.
+
+\f
+NEWS for rsync 2.6.5 (1 Jun 2005)
+Protocol: 29 (unchanged)
+Changes since 2.6.4:
+
+ OUTPUT CHANGES:
+
+ - Non-printable chars in filenames are now output using backslash-
+ escaped characters rather than '?'s. Any non-printable character is
+ output using 3 digits of octal (e.g. "\n" -> "\012"), and a backslash
+ is now output as "\\". Rsync also uses your locale setting, which
+ can make it treat fewer high-bit characters as non-printable.
+
+ - If rsync received an empty file-list when pulling files, it would
+ output a "nothing to do" message and exit with a 0 (success) exit
+ status, even if the remote rsync returned an error (it did not do
+ this under the same conditions when pushing files). This was changed
+ to make the pulling behavior the same as the pushing behavior: we
+ now do the normal end-of-run outputting (depending on options) and
+ exit with the appropriate exit status.
+
+ BUG FIXES:
+
+ - A crash bug was fixed when a daemon had its "path" set to "/", did
+ not have chroot enabled, and used some anchored excludes in the
+ rsyncd.conf file.
+
+ - Fixed a bug in the transfer of a single file when -H is specified
+ (rsync would either infinite loop or perhaps crash).
+
+ - Fixed a case where the generator might try (and fail) to tweak the
+ write-permissions of a read-only directory in list-only mode (this
+ only caused an annoying warning message).
+
+ - If --compare-dest or --link-dest uses a locally-copied file as the
+ basis for an updated version, log this better when --verbose or -i
+ is in effect.
+
+ - Fixed the accidental disabling of --backup during the --delete-after
+ processing.
+
+ - Restored the ability to use the --address option in client mode (in
+ addition to its use in daemon mode).
+
+ - Make sure that some temporary progress information from the delete
+ processing does not get left on the screen when it is followed by a
+ newline.
+
+ - When --existing skips a directory with extra verbosity, refer to it
+ as a "directory", not a "file".
+
+ - When transferring a single file to a different-named file, any
+ generator messages that are source-file related no longer refer to
+ the file by the destination filename.
+
+ - Fixed a bug where hard-linking a group of files might fail if the
+ generator hasn't created a needed destination directory yet.
+
+ - Fixed a bug where a hard-linked group of files that is newly-linked
+ to a file in a --link-dest dir doesn't link the files from the rest
+ of the cluster.
+
+ - When deleting files with the --one-file-system (-x) option set, rsync
+ no longer tries to remove files from inside a mount-point on the
+ receiving side. Also, we don't complain about being unable to remove
+ the mount-point dir.
+
+ - Fixed a compatibility problem when using --cvs-ignore (-C) and
+ sending files to an older rsync without using --delete.
+
+ - Make sure that a "- !" or "+ !" include/exclude pattern does not
+ trigger the list-clearing action that is reserved for "!".
+
+ - Avoid a timeout in the generator when the sender/receiver aren't
+ handling the generator's checksum output quickly enough.
+
+ - Fixed the omission of some directories in the delete processing when
+ --relative (-R) was combined with a source path that had a trailing
+ slash.
+
+ - Fixed a case where rsync would erroneously delete some files and then
+ re-transfer them when the options --relative (-R) and --recursive
+ (-r) were both enabled (along with --delete) and a source path had a
+ trailing slash.
+
+ - Make sure that --max-size doesn't affect a device or a symlink.
+
+ - Make sure that a system with a really small MAXPATHLEN does not cause
+ the buffers in readfd_unbuffered() to be too small to receive normal
+ messages. (This mainly affected Cygwin.)
+
+ - If a source pathname ends with a filename of "..", treat it as if
+ "../" had been specified (so that we don't copy files to the parent
+ dir of the destination).
+
+ - If --delete is combined with a file-listing rsync command (i.e. no
+ transfer is happening), avoid outputting a warning that we couldn't
+ delete anything.
+
+ - If --stats is specified with --delete-after, ensure that all the
+ "deleting" messages are output before the statistics.
+
+ - Improved one "if" in the deletion code that was only checking errno
+ for ENOTEMPTY when it should have also been checking for EEXIST (for
+ compatibility with OS variations).
+
+ ENHANCEMENTS:
+
+ - Added the --only-write-batch=FILE option that may be used (instead
+ of --write-batch=FILE) to create a batch file without doing any
+ actual updating of the destination. This allows you to divert all
+ the file-updating data away from a slow data link (as long as you
+ are pushing the data to the remote server when creating the batch).
+
+ - When the generator is taking a long time to fill up its output buffer
+ (e.g. if the transferred files are few, small, or missing), it now
+ periodically flushes the output buffer so that the sender/receiver
+ can get started on the files sooner rather than later.
+
+ - Improved the keep-alive code to handle a long silence between the
+ sender and the receiver that can occur when the sender is receiving
+ the checksum data for a large file.
+
+ - Improved the auth-errors that are logged by the daemon to include
+ some information on why the authorization failed: wrong user,
+ password mismatch, etc. (The client-visible message is unchanged!)
+
+ - Improved the client's handling of an "@ERROR" from a daemon so that
+ it does not complain about an unexpectedly closed socket (since we
+ really did expect the socket to close).
+
+ - If the daemon can't open the log-file specified in rsyncd.conf, fall
+ back to using syslog and log an appropriate warning. This is better
+ than what was typically a totally silent (and fatal) failure (since a
+ daemon is not usually run with the --no-detach option that was
+ necessary to see the error on stderr).
+
+ - The man pages now consistently refer to an rsync daemon as a "daemon"
+ instead of a "server" (to distinguish it from the server process in a
+ non-daemon transfer).
+
+ - Made a small change to the rrsync script (restricted rsync -- in the
+ support dir) to make a read-only server reject all --remove-* options
+ when sending files (to future-proof it against the possibility of
+ other similar options being added at some point).
+
+ INTERNAL:
+
+ - Rsync now calls setlocale(LC_CTYPE, ""). This enables isprint() to
+ better discern which filename characters need to be escaped in
+ messages (which should result in fewer escaped characters in some
+ locales).
+
+ - Improved the naming of the log-file open/reopen/close functions.
+
+ - Removed some protocol-compatibility code that was only needed to help
+ someone running a pre-release of 2.6.4.
+
+ BUILD CHANGES:
+
+ - Added configure option "--disable-locale" to disable any use of
+ setlocale() in the binary.
+
+ - Fixed a bug in the SUPPORT{,_HARD}_LINKS #defines which prevented
+ rsync from being built without symlink or hard-link support.
+
+ - Only #define HAVE_REMSH if it is going to be set to 1.
+
+ - Configure now disables the use of mkstemp() under HP-UX (since they
+ refuse to fix its broken handling of large files).
+
+ - Configure now explicitly checks for the lseek64() function so that
+ the code can use HAVE_LSEEK64 instead of inferring lseek64()'s
+ presence based on the presence of the off64_t type.
+
+ - Configure no longer mentions the change in the default remote-shell
+ (from rsh to ssh) that occurred for the 2.6.0 release.
+
+ - Some minor enhancements to the test scripts.
+
+ - Added a few new *.diff files to the patches dir, including a patch
+ that enables the optional copying of extended attributes.
+
+\f
NEWS for rsync 2.6.4 (30 March 2005)
Protocol: 29 (changed)
Changes since 2.6.3:
is also output prior to the transfer is when --progress was specified
(so that the name will precede the progress stats, and the full
--log-format output will come after).
+
+ - Non-printable characters in filenames are replaced with a '?' to
+ avoid corrupting the screen or generating empty lines in the output.
BUG FIXES:
- An OS that has a binary mode for its files (such as cygwin) needed
setmode(fd, O_BINARY) called on the temp-file we opened with
- mkstemp(). (Fix derived from the cygwin's 2.6.3 rsync package.)
+ mkstemp(). (Fix derived from cygwin's 2.6.3 rsync package.)
- Fixed a potential hang when verbosity is high, the client side is
the sender, and the file-list is large.
(since the forked process already has a copy of the exclude list,
there's no need to send them a set of duplicates).
- - When --progress is specified, the output of items that the generator
- is creating (e.g. dirs, symlinks) is now integrated into the progress
- output without overlapping it. (Requires protocol 29.)
+ - The output of the items that are being updated by the generator (dirs,
+ symlinks, devices) is now intermingled in the proper order with the
+ output from the items that the receiver is updating (regular files)
+ when pulling. This misordering was particularly bad when --progress
+ was specified. (Requires protocol 29.)
- When --timeout is specified, lulls that occur in the transfer while
the generator is doing work that does not generate socket traffic
back to the client side when a remote --files-from was in effect and
the daemon was the receiver.
- - The --compare-dest option was not updating a file that differred in
+ - The --compare-dest option was not updating a file that differed in
(the preserved) attributes from the version in the compare-dest DIR.
- When rsync is copying files into a write-protected directory, fixed
29.)
- Added the --dirs (-d) option for an easier way to copy directories
- without recursion.
+ without recursion. Any directories that are encountered are created
+ on the destination. Specifying a directory with a trailing slash
+ copies its immediate contents to the destination.
+
+ - The --files-from option now implies --dirs (-d).
- Added the --list-only option, which is mainly a way for the client to
put the server into listing mode without needing to resort to any
- Handle an operating system that use mkdev() in place of makedev().
- Improved configure to better handle cross-compiling.
+
+\f
NEWS for rsync 2.6.3 (30 Sep 2004)
Protocol: 28 (unchanged)
Changes since 2.6.2:
- We now reset the "new data has been sent" flag at the start of
each file we send. This makes sure that an interrupted transfer
with the --partial option set doesn't keep a shorter temp file
- than the current basis file when no new data has been transfered
+ than the current basis file when no new data has been transferred
over the wire for that file.
- Fixed a byte-order problem in --batch-mode on big-endian machines.
\f
Partial Protocol History
RELEASE DATE VER. DATE OF COMMIT* PROTOCOL
+ ?? ??? 2006 2.6.7 29
+ 28 Jul 2005 2.6.6 29
+ 01 Jun 2005 2.6.5 29
30 Mar 2005 2.6.4 17 Jan 2005 29
30 Sep 2004 2.6.3 28
30 Apr 2004 2.6.2 28
Matt McCutchen's Web Site / rsync / rsync.git / blobdiff