# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-TMP="$scratchdir"
-FROM=${TMP}/from
-TO=${TMP}/to
-LOG=${TMP}/log
-RSYNC="$rsync_bin"
+tmpdir="$scratchdir"
+fromdir="$tmpdir/from"
+todir="$tmpdir/to"
+chkdir="$tmpdir/chk"
+
+# For itemized output:
+all_plus='+++++++++'
+allspace=' '
+dots='.....' # trailing dots after changes
+
+# Berkley's nice.
+PATH="$PATH:/usr/ucb"
+
+if diff -u "$srcdir/testsuite/rsync.fns" "$srcdir/testsuite/rsync.fns" >/dev/null 2>&1; then
+ diffopt="-u"
+else
+ diffopt="-c"
+fi
+
+HOME="$scratchdir"
+export HOME
runtest() {
echo $ECHO_N "Test $1: $ECHO_C"
if eval "$2"
then
- echo "${ECHO_T} done."
+ echo "$ECHO_T done."
return 0
else
- echo "${ECHO_T} failed!"
+ echo "$ECHO_T failed!"
return 1
fi
}
+set_cp_destdir() {
+ while test $# -gt 1; do
+ shift
+ done
+ destdir="$1"
+}
+
+# Perform a "cp -p", making sure that timestamps are really the same,
+# even if the copy rounded microsecond times on the destination file.
+cp_touch() {
+ cp -p "${@}" || test_fail "cp -p failed"
+ if test $# -gt 2 -o -d "$2"; then
+ set_cp_destdir "${@}" # sets destdir var
+ while test $# -gt 1; do
+ destname="$destdir/`basename $1`"
+ touch -r "$destname" "$1" "$destname"
+ shift
+ done
+ else
+ touch -r "$2" "$1" "$2"
+ fi
+}
+
+# Call this if you want to filter out verbose messages (-v or -vv) from
+# the output of an rsync run (whittling the output down to just the file
+# messages). This isn't needed if you use -i without -v.
+filter_outfile() {
+ sed -e '/^building file list /d' \
+ -e '/^sending incremental file list/d' \
+ -e '/^created directory /d' \
+ -e '/^done$/d' \
+ -e '/ --whole-file$/d' \
+ -e '/^total: /d' \
+ -e '/^client charset: /d' \
+ -e '/^server charset: /d' \
+ -e '/^$/,$d' \
+ <"$outfile" >"$outfile.new"
+ mv "$outfile.new" "$outfile"
+}
+
printmsg() {
echo "$1"
}
-
rsync_ls_lR() {
- find "$@" -print | sort | xargs $TLS
+ find "$@" -print | sort | sed 's/ /\\ /g' | xargs "$TOOLDIR/tls" $TLS_ARGS
+}
+
+check_perms() {
+ perms=`"$TOOLDIR/tls" "$1" | sed 's/^[-d]\(.........\).*/\1/'`
+ if test $perms = $2; then
+ return 0
+ fi
+ echo "permissions: $perms on $1"
+ echo "should be: $2"
+ test_fail "failed test $3"
+}
+
+rsync_getgroups() {
+ "$TOOLDIR/getgroups"
}
####################
-# Build test directories TO and FROM, with FROM full of files.
+# Build test directories $todir and $fromdir, with $fromdir full of files.
hands_setup() {
# Clean before creation
- rm -rf $FROM
- rm -rf $TO
-
- [ -d $FROM ] || mkdir $FROM
- [ -d $TO ] || mkdir $TO
+ rm -rf "$fromdir"
+ rm -rf "$todir"
+
+ [ -d "$tmpdir" ] || mkdir "$tmpdir"
+ [ -d "$fromdir" ] || mkdir "$fromdir"
+ [ -d "$todir" ] || mkdir "$todir"
# On some BSD systems, the umask affects the mode of created
# symlinks, even though the mode apparently has no effect on how
# the same. So, we need to set our umask before doing any creations.
# set up test data
- touch ${FROM}/empty
- mkdir ${FROM}/emptydir
+ touch "$fromdir/empty"
+ mkdir "$fromdir/emptydir"
# a hundred lines of text or so
- rsync_ls_lR ${srcdir} > ${FROM}/filelist
+ rsync_ls_lR "$srcdir" > "$fromdir/filelist"
- # This might fail on systems that don't have -n
- echo $ECHO_N "This file has no trailing lf$ECHO_C" > ${FROM}/nolf
+ echo $ECHO_N "This file has no trailing lf$ECHO_C" > "$fromdir/nolf"
umask 0
- ln -s nolf ${FROM}/nolf-symlink
+ ln -s nolf "$fromdir/nolf-symlink"
umask 022
- cat $srcdir/*.c > ${FROM}/text
- mkdir ${FROM}/dir
- cp ${FROM}/text ${FROM}/dir
- mkdir ${FROM}/dir/subdir
- mkdir ${FROM}/dir/subdir/subsubdir
- ls -ltr /etc > ${FROM}/dir/subdir/subsubdir/etc-ltr-list
- mkdir ${FROM}/dir/subdir/subsubdir2
- ls -lt /bin > ${FROM}/dir/subdir/subsubdir2/bin-lt-list
+ cat "$srcdir"/*.c > "$fromdir/text"
+ mkdir "$fromdir/dir"
+ cp "$fromdir/text" "$fromdir/dir"
+ mkdir "$fromdir/dir/subdir"
+ echo some data > "$fromdir/dir/subdir/foobar.baz"
+ mkdir "$fromdir/dir/subdir/subsubdir"
+ if [ -r /etc ]; then
+ ls -ltr /etc > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+ else
+ ls -ltr / > "$fromdir/dir/subdir/subsubdir/etc-ltr-list"
+ fi
+ mkdir "$fromdir/dir/subdir/subsubdir2"
+ if [ -r /bin ]; then
+ ls -lt /bin > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+ else
+ ls -lt / > "$fromdir/dir/subdir/subsubdir2/bin-lt-list"
+ fi
# echo testing head:
-# ls -lR ${srcdir} | head -10 || echo failed
+# ls -lR "$srcdir" | head -10 || echo failed
}
-
-
####################
# Many machines do not have "mkdir -p", so we have to build up long paths.
# How boring.
-makepath () {
- echo " makepath $1"
- p="$1"
- (
+makepath() {
+ for p in "${@}"; do
+ (echo " makepath $p"
+
# Absolut Unix.
if echo $p | grep '^/' >/dev/null
then
cd /
fi
- # This will break if $1 contains a space.
+ # This will break if $p contains a space.
for c in `echo $p | tr '/' ' '`
do
if [ -d "$c" ] || mkdir "$c"
else
echo "failed to create $c" >&2; return $?
fi
- done
- )
+ done)
+ done
}
# Run a test (in '$1') then compare directories $2 and $3 to see if
# there are any difference. If there are, explain them.
+# So normally basically $1 should be an rsync command, and $2 and $3
+# the source and destination directories. This is only good when you
+# expect to transfer the whole directory exactly as is. If some files
+# should be excluded, you might need to use something else.
+
checkit() {
- log=${LOG}
failed=
- # the log accumulates all output; we only display it if there
- # is a problem.
- echo "Running: \"$1\"" >${log}
- echo "">>${log}
- eval "$1" >>${log} 2>&1
+ # We can just write everything to stdout/stderr, because the
+ # wrapper hides it unless there is a problem.
+
+ echo "Running: \"$1\""
+ eval "$1"
status=$?
if [ $status != 0 ]; then
failed="YES";
fi
- echo "-------------">>${log}
- echo "check how the files compare with diff:">>${log}
- echo "">>${log}
- diff -cr $2 $3 >>${log} 2>&1 || failed=YES
- echo "-------------">>${log}
- echo "check how the directory listings compare with diff:">>${log}
- echo "">>${log}
- ( cd "$2" && rsync_ls_lR ) > ${TMP}/ls-from 2>>${log}
- ( cd "$3" && rsync_ls_lR ) > ${TMP}/ls-to 2>>${log}
- diff -c ${TMP}/ls-from ${TMP}/ls-to >>${log} 2>&1 || failed=YES
- if [ -z "${failed}" ] ; then
- rm $log
+ echo "-------------"
+ echo "check how the directory listings compare with diff:"
+ echo ""
+ ( cd "$2" && rsync_ls_lR . ) > "$tmpdir/ls-from"
+ ( cd "$3" && rsync_ls_lR . ) > "$tmpdir/ls-to"
+ diff $diffopt "$tmpdir/ls-from" "$tmpdir/ls-to" || failed=YES
+
+ echo "-------------"
+ echo "check how the files compare with diff:"
+ echo ""
+ if [ "x$4" != x ]; then
+ echo " === Skipping (as directed) ==="
+ else
+ diff -r $diffopt "$2" "$3" || failed=YES
+ fi
+
+ echo "-------------"
+ if [ -z "$failed" ] ; then
return 0
else
- cat ${log}
- rm ${log}
return 1
fi
}
-# In fact, we need a more general feature of capturing all stderr/log files,
-# and dumping them if something goes wrong.
-
-checkforlogs() {
- # skip it if we're under debian-test
- if test -n "${Debian}" ; then return 0 ; fi
-
- if [ -f $1 -a -s $1 ] ; then
- echo "Failures have occurred. $1 follows:" >&2
- cat $1 >&2
- exit 1
- fi
-}
-
-
build_rsyncd_conf() {
# Build an appropriate configuration file
conf="$scratchdir/test-rsyncd.conf"
port=2612
pidfile="$scratchdir/rsyncd.pid"
logfile="$scratchdir/rsyncd.log"
+ hostname=`uname -n`
- cat >$conf <<EOF
+ cat >"$conf" <<EOF
# rsyncd configuration file autogenerated by $0
pid file = $pidfile
use chroot = no
-hosts allow = localhost, 127.0.0.1
+munge symlinks = no
+hosts allow = localhost 127.0.0.0/24 192.168.0.0/16 10.0.0.0/8 $hostname
log file = $logfile
-
-[test-from] = $scratchdir/daemon-from/
+log format = %i %h [%a] %m (%u) %l %f%L
+transfer logging = yes
+exclude = ? foobar.baz
+max verbosity = 9
+uid = 0
+gid = 0
+
+[test-from]
+ path = $fromdir
read only = yes
+ comment = r/o
+
+[test-to]
+ path = $todir
+ read only = no
+ comment = r/w
-[test-to] = $scratchdir/daemon-to/
+[test-scratch]
+ path = $scratchdir
read only = no
+
+[test-hidden]
+ path = $fromdir
+ list = no
EOF
+
+ # Build a helper script to ignore exit code 23
+ ignore23="$scratchdir/ignore23"
+ echo "building help script $ignore23"
+
+ cat >"$ignore23" <<'EOT'
+if "${@}"; then
+ exit
+fi
+
+ret=$?
+
+if test $ret = 23; then
+ exit
+fi
+
+exit $ret
+EOT
+chmod +x "$ignore23"
+}
+
+
+build_symlinks() {
+ mkdir "$fromdir"
+ date >"$fromdir/referent"
+ ln -s referent "$fromdir/relative"
+ ln -s "$fromdir/referent" "$fromdir/absolute"
+ ln -s nonexistent "$fromdir/dangling"
+ ln -s "$srcdir/rsync.c" "$fromdir/unsafe"
+}
+
+test_fail() {
+ echo "$@" >&2
+ exit 1
+}
+
+test_skipped() {
+ echo "$@" >&2
+ echo "$@" > "$tmpdir/whyskipped"
+ exit 77
+}
+
+# It failed, but we expected that. don't dump out error logs,
+# because most users won't want to see them. But do leave
+# the working directory around.
+test_xfail() {
+ echo "$@" >&2
+ exit 78
+}
+
+# Determine what shell command will appropriately test for links.
+ln -s foo "$scratchdir/testlink"
+for cmd in test /bin/test /usr/bin/test /usr/ucb/bin/test /usr/ucb/test
+do
+ for switch in -h -L
+ do
+ if $cmd $switch "$scratchdir/testlink" 2>/dev/null
+ then
+ # how nice
+ TEST_SYMLINK_CMD="$cmd $switch"
+ # i wonder if break 2 is portable?
+ break 2
+ fi
+ done
+done
+# ok, now get rid of it
+rm "$scratchdir/testlink"
+
+
+if [ "x$TEST_SYMLINK_CMD" = 'x' ]
+then
+ test_fail "Couldn't determine how to test for symlinks"
+else
+ echo "Testing for symlinks using '$TEST_SYMLINK_CMD'"
+fi
+
+
+# Test whether something is a link, allowing for shell peculiarities
+is_a_link() {
+ # note the variable contains the first option and therefore is not quoted
+ $TEST_SYMLINK_CMD "$1"
}
+# We need to set the umask to be reproducible. Note also that when we
+# do some daemon tests as root, we will setuid() and therefore the
+# directory has to be writable by the nobody user in some cases. The
+# best thing is probably to explicitly chmod those directories after
+# creation.
+
+umask 022