-NEWS for rsync 3.0.0 (UNRELEASED)
-Protocol: 30 (changed)
-Changes since 2.6.9:
-
- NOTABLE CHANGE:
-
- - The handling of implied directories when using --relative has changed
- to send them as directories (e.g. no implied dir is ever sent as a
- symlink). This avoids unexpected behavior and should not adversely
- affect most people. If you're one of those rare people who relied
- upon having an implied dir be duplicated as a symlink, either specify
- --keep-dirlinks or --no-implied-dirs.
+NEWS for rsync 3.0.3 (UNRELEASED)
+Protocol: 30 (unchanged)
+Changes since 3.0.2:
BUG FIXES:
- - Fixed the output of -ii when combined with one of the --*-dest options:
- it now itemizes all the items, not just the changed ones.
-
- - Made the output of all file types consistent when using a --*-dest
- option. Prior versions used to output too many creation events for
- matching items.
-
- - The code that waits for a child pid now handles being interrupted by a
- signal. This fixes a problem with the pre-xfer exec function not being
- able to get the exit status from the script.
-
- - A negated filter rule (with a '!' modifier) no longer loses the negation
- when sending the filter rules to the remote rsync.
-
- - Fixed a problem with the --out-format (aka --log-format) option %f: it
- would output superfluous directory information for a non-daemon rsync.
-
- - Fixed a problem with -vv (double --verbose) and --stats when "pushing"
- files (which includes local copies). Version 2.6.9 would complete the
- copy, but exit with an error when the receiver output its memory stats.
-
- - If --password-file is used on a non-daemon transfer, rsync now complains
- and exits. This should help users figure out that they can't use this
- option to control a remote shell's password prompt.
+ - Fixed a wildcard matching problem in the daemon when a module has
+ "use chroot" enabled.
- - Make sure that directory permissions of a newly-created destination
- directory are handled right when --perms is left off.
+ - Fixed a crash bug in the hard-link code.
- - The itemized output of a newly-created destination directory is now
- output as a creation event, not a change event.
+ - Fixed the sending of xattr directory information when the code finds a
+ --link-dest or --copy-dest directory with unchanged xattrs -- the
+ destination directory now gets these unchanged xattrs properly applied.
- - Improved --hard-link so that more corner cases are handled correctly
- when combined with options such as --link-dest and/or --ignore-existing.
-
- - The --append option no longer updates a file that has the same size.
-
- - Fixed a bug when combining --backup and --backup-dir with --inplace:
- any missing backup directories are now created.
-
- - Fixed a bug when using --backup and --inplace with --whole-file or
- --read-batch: backup files are actually created now.
-
- - Starting up an extra copy of an rsync daemon does not delete the pidfile
- for the running daemon -- if the pidfile exists, the extra program will
- exit with an error.
-
- - The daemon pidfile is checked and created sooner in the startup sequence.
-
- ENHANCEMENTS:
+ - Fixed an xattr-sending glitch that could cause an "Internal abbrev"
+ error.
- - A new incremental-recursion algorithm is now used when rsync is talking
- to another 3.x version. This starts the transfer going more quickly
- (before all the files have been found), and requires much less memory.
- See the --recursive option in the manpage for some restrictions.
-
- - Saved memory in the non-incremental-recursion algorithm for typical
- option values (usually saving from 21-29 bytes per file).
-
- - The default --delete algorithm is now --delete-during when talking to a
- 3.x rsync. This is a faster scan than using --delete-before (which is
- the default when talking to older rsync versions), and is compatible with
- the new incremental recursion mode.
-
- - Added the --delete-delay option, which is a more efficient way to delete
- files at the end of the transfer without needing a separate delete pass.
-
- - Added the --acls (-A) option to preserve Access Control Lists. This is
- an improved version of the prior patch that was available, and it even
- supports OS X ACLs. (If you need to have backward compatibility with
- old, patched versions of rsync, apply the acls.diff file from the patches
- dir.)
-
- - Added the --xattrs (-X) option to preserver extended attributes. This is
- an improved version of the prior patch that was available. (If you need
- to have backward compatibility with old, patched versions of rsync, apply
- the xattrs.diff file from the patches dir.)
-
- - Added the --fake-super option that allows a non-super user to preserve
- all attributes of a file by using a special extended-attribute idiom.
- There is also an analogous "fake super" option for an rsync daemon.
+ - Fixed the combination of --xattrs and --backup.
- - Added the --iconv option, which allows rsync to convert filenames from
- one character-set to another during the transfer. The default is to make
- this feature available as long as your system has iconv_open(). If
- compilation fails, specify --disable-iconv to configure, and then
- rebuild. If you want rsync to perform character-set conversions by
- default, you can specify --enable-iconv=CONVERT_STRING with the default
- value for the --iconv option that you wish to use. For example,
- --enable-iconv=. is a good choice. See the rsync manpage for an
- explanation of the --iconv option's settings.
+ - The generator no longer allows a '.' dir to be excluded by a daemon-
+ exclude rule.
- - Added the --skip-compress=LIST option to override of the default list of
- file suffixes that will not be compressed when using --compress.
-
- - The daemon's default for "dont compress" was extended to include:
- *.7z *.mp[34] *.mov *.avi *.ogg *.jpg *.jpeg
- The matching routine was also optimized to run more quickly.
+ - Fixed deletion handling when copying a single, empty directory (with no
+ files) to a differently named, non-existent directory.
- - The --max-delete option now outputs a warning if it skipped any file
- deletions, including a count of how many deletions were skipped. (Older
- versions just silently stopped deleting things.)
+ - Fixed the conversion of spaces into dashes in the %M log escape.
- - You may specify --max-delete=0 to a 3.0.0 client to request that it warn
- about extraneous files without deleting anything. If you're not sure
- what version the client is, you can use the less-obvious --max-delete=-1,
- as both old and new versions will treat that as the same request (though
- older versions don't warn).
+ - Fixed several places in the code that were not returning the right
+ errno when a function failed.
- - The --hard-link option now uses less memory on both the sending and
- receiving side for all protocol versions. For protocol 30, the use of a
- hashtable on the sending side allows us to more efficiently convey to the
- receiver what files are linked together. This reduces the amount of data
- sent over the socket by a considerable margin (rather than adding more
- data), and limits the in-memory storage of the device+inode information
- to just the sending side for the new protocol 30, or to the receiving
- side when speaking an older protocol (note that older rsync versions kept
- the device+inode information on both sides).
+ - Fixed the backing up of a device or special file into a backup dir.
- - The filter rules now support a perishable ("p") modifier that marks rules
- that should not have an effect in a directory that is being deleted. e.g.
- -f '-p .svn/' would only affect "live" .svn directories.
+ - Moved the setting of the socket options prior to the connect().
- - If we get an error setting the time on a symlink, we don't complain about
- it anymore (since some operating systems don't support that, and it's not
- that important).
+ - If rsync exits in the middle of a --progress output, it now outputs a
+ newline to help prevent the progress line from being overwritten.
- - Protocol 30 now uses MD5 checksums instead of MD4.
+ - Fixed a problem with how a destination path with a trailing slash or
+ a trailing dot-dir was compared against the daemon excludes.
- - If a daemon module's "path" value is not an absolute pathname, the code
- now makes it absolute internally (making it work properly).
+ - Fixed the sending of large (size > 16GB) files when talking to an older
+ rsync (protocols < 30): we now use a compatible block size limit.
- - Changed the --append option to not checksum the existing data in the
- destination file, which speeds up file appending.
+ - If a file's length is so huge that we overflow a checksum buffer count
+ (i.e. several hundred TB), warn the user and avoid sending an invalid
+ checksum struct over the wire.
- - Added the --append-verify option, which works like the older --append
- option (verifying the existing data in the destination file). For
- compatibility with older rsync versions, any use of --append that is
- talking protocol 29 or older will revert to the --append-verify method.
+ - If a source arg is excluded, --relative no longer adds the excluded
+ arg's implied dirs to the transfer. This fix also made the exclude
+ check happen in the better place in the sending code.
- - Documented and extended the support for the RSYNC_CONNECT_PROG variable
- that can be used to enhance the client side of a daemon connection.
+ - Use the overflow_exit() function for overflows, not out_of_memory().
- - Added the --protect-args (-s) option, that tells rsync to send most of
- the command-line args at the start of the transfer rather than as args
- to the remote-shell command. This protects them from space-splitting,
- and only interprets basic wildcard special shell characters (*?[).
+ - Improved the code to better handle a system that has only 32-bit file
+ offsets.
- - Rsync now allows multiple remote-source args to be specified rather than
- having to rely on a special space-splitting side-effect of the remote-
- shell. (Additional remote args must specify the same host or have no
- hostname.)
-
- - Improved the dashes and double-quotes in the nroff manpage output.
-
- - We now support a lot more --no-OPTION override options.
-
- INTERNAL:
-
- - The file-list sorting algorithm now uses a sort that keeps any same-
- named items in the same order as they were specified. This allows
- rsync to always ensure that the first of the duplicates is the one
- that will be included in the copy. The new sort was also faster
- than the glibc version of qsort() and mergesort() in my testing.
-
- - Rsync now supports the transfer of 64-bit timestamps (time_t values).
-
- - Fixed a build problem with older (2.x) versions of gcc.
-
- - Added some isType() functions that make dealing with signed characters
- easier without forcing variables via casts.
-
- - Changed strcat/strcpy/sprintf function calls to use safer versions.
-
- - Upgraded the included popt version to 1.10.2 and improved its use of
- string-handling functions.
-
- - Added missing prototypes for compatibility functions from the lib dir.
-
- - Configure determines if iconv() has a const arg, allowing us to avoid a
- compiler warning.
+ ENHANCEMENTS:
- - Made the sending of some numbers more efficient for protocol 30.
+ - The rsyncd.conf manpage now consistently refers to the parameters in
+ the daemon config file as "parameters".
- - Make sure that a daemon process doesn't mind if the client was weird and
- omitted the --server option.
+ - The description of the --inplace option was improved.
- - Improved the use of "const" on pointers.
+ DEVELOPER RELATED:
- - Improved J.W.'s pool_alloc routines to add a way of freeing older
- sections of a pool's memory.
+ - Fixed a testcase failure if the tests are run as root and made some
+ compatibility improvements.
- DEVELOPER RELATED:
+ - Improved the daemon tests, including checking module comments, the
+ listing of files, and the ensuring that daemon excludes can't affect
+ a dot-dir arg.
- - Rsync is now licensed under the GPLv3 or later.
+ - Improved some build rules for those that build in a separate directory
+ from the source, including better install rules for the man pages, and
+ the fixing of a proto.h-tstamp rule that could make the binaries get
+ rebuild without cause.
- - When running the tests, we now put our per-test temp dirs into a sub-
- directory named testtmp (which is created, if missing). This allows
- someone to symlink the testtmp directory to another filesystem (which is
- useful if the build dir's filesystem does not support ACLs and xattrs,
- and another file system does).
+ - Improved the testsuite to work around a problem with some utilities
+ (e.g. cp -p & touch -r) rounding sub-second timestamps.
- - Rsync now has a way of handling protocol-version changes during the
- development of a new protocol version. This exchange of sub-version
- info does not interfere with the {MIN,MAX}_PROTOCOL_VERSION checking
- in older versions (since we'd quickly exceed the MAX_PROTOCOL_VERSION
- if we incremented the main PROTOCOL_VERSION value for every minor
- change during development).
+ - Ensure that the early patches don't cause any generated-file hunks to
+ bleed-over into patches that follow.