- - Added the --append option that makes rsync append data onto files that
- are longer on the source than the destination (this includes new files).
-
- - Added the --min-size=SIZE option to exclude small files from the
- transfer.
-
- - Added the --compress-level option to allow you to set how aggressive
- rsync's compression should be (this option implies --compress).
-
- - Enhanced the parsing of the SIZE value for --min-size and --max-size to
- allow easy entry of multiples of 1000 (instead of just multiples of 1024)
- and off-by-one values too (e.g. --max-size=8mb-1).
-
- - Added the --8-bit-output (-8) option, which tells rsync to avoid escaping
- high-bit characters that it thinks are unreadable in the current locale.
-
- - The new option --human-readable (-h) changes the output of --progress,
- --stats, and the end-of-run summary to be easier to read. If repeated,
- the units become powers of 1024 instead of powers of 1000. (The old
- meaning of -h, as a shorthand for --help, still works as long as you
- just use it on its own, as in "rsync -h".)
-
- - If lutimes() and/or lchmod() are around, use them to allow the
- preservation of attributes on symlinks.
-
- - The --link-dest option now affects symlinks and devices (when possible).
-
- - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" and
- "post-xfer exec". These allow a command to be specified on a per-module
- basis that will be run before and/or after a daemon-mode transfer. (See
- the man page for a list of the environment variables that are set with
- information about the transfer.)
-
- - When using the --relative option, you can now insert a dot dir in
- the source path to indicate where the replication of the source dirs
- should start. For example, if you specify a source path of
- rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
- replicate the "baz/dir" part of the source path (note: a trailing
- dot dir is unaffected unless it also has a trailing slash).
-
- - Added some new --no-FOO options that make it easier to override unwanted
- implied or default options. For example, "-a --no-o" (aka "--archive
- --no-owner") can be used to turn off the preservation of file ownership
- that is implied by -a.
-
- - Added the --chmod=MODE option that allows the destination permissions to
- be changed from the source permissions. E.g. --chmod=g+w,o-rwx
-
- - Added the "incoming chmod" and "outgoing chmod" daemon options that allow
- a module to specify what permissions changes should be applied to all
- files copied to and from the daemon.
-
- - Allow the --temp-dir option to be specified when starting a daemon, which
- sets the default temporary directory for incoming files.
-
- - If --delete is combined with --dirs without --recursive, rsync will now
- delete in any directory whose content is being synchronized.
-
- - If --backup is combined with --delete without --backup-dir (and without
- --delete-excluded), we add a "protect" filter-rule to ensure that files
- with the backup suffix are not deleted.
-
- - The file-count stats that are output by --progress were improved to
- better indicate what the numbers mean. For instance, the output:
- "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
- to be transferred, and we still need to check 8383 more files out of
- a total of 9999.
-
- - The include/exclude code now allows a dir/*** directive (with 3 trailing
- stars) to match both the dir itself as well as all the content below the
- dir (dir/** would not match the dir).
-
- - Added the --prune-empty-dirs (-m) option that makes the receiving rsync
- discard empty chains of directories from the file-list. This makes it
- easier to selectively copy files from a source hierarchy and end up with
- just the directories needed to hold the resulting files.
-
- - If the --itemize-changes (-i) option is repeated, rsync now includes
- unchanged files in the itemized output (similar to -vv, but without all
- the other verbose messages that can get in the way). Of course, the
- client must be version 2.6.7 for this to work, but the remote rsync only
- needs to be 2.6.7 if you're pushing files.
-
- - Added the --specials option to tell rsync to copy non-device special
- files (which rsync now attempts even as a normal user). The --devices
- option now requests the copying of just devices (character and block).
- The -D option still requests both (e.g. --devices and --specials), -a
- still implies -D, and non-root users still get a silent downgrade that
- omits device copying.
-
- - Added the --super option to make the receiver always attempt super-user
- activities. This is useful for systems that allow things such as devices
- to be created or ownership to be set without being UID 0, and is also
- useful for someone who wants to ensure that errors will be output if the
- receiving rsync isn't being run as root.
-
- - Added the --sockopts option for those few who want to customize the TCP
- options used to contact a daemon rsync.
-
- - Added a way for the --temp-dir option to be combined with a partial-dir
- setting that lets rsync avoid non-atomic updates (for those times when
- --temp-dir is not being used because space is tight).
-
- - A new support script, files-to-excludes, will transform a list of files
- into a set of include/exclude directives that will copy those files.
-
- - A new option, --executability (-E) can be used to preserve just the
- execute bit on files, for those times when using the --perms option is
- not desired.
-
- - The daemon now logs each connection and also each module-list request
- that it receives.
-
- - New log-format options: %M (modtime), %U (uid), %G (gid), and %B
- (permission bits, e.g. "rwxr-xrwt").
-
- - The --dry-run option no longer forces the enabling of --verbose.
-
- - The --remove-sent-files option now does a better job of incrementally
- removing the sent files on the sending side (older versions tended to
- clump up all the removals at the end).
-
- - A daemon now supersedes its minimal SIGCHLD handler with the standard
- PID-remembering version after forking to handle the request. This
- ensures that the generator can get the child-exit status from the
- receiver.
-
- - Use of the --bwlimit option no longer interferes with the remote rsync
- sending error messages about invalid/refused options.
-
- - Rsync no longer returns a usage error when used with one local source arg
- and no destination: this now implies the --list-only option, just like
- the comparable situation with a remote source arg.
-
- - Various documentation improvements, including: a better synopsis, some
- improved examples, a better discussion of the presence and absence of
- --perms (including how it interacts with the new --executability and
- --chmod options), an extended discussion of --temp-dir, an improved
- discussion of --partial-dir, a better description of rsync's pattern
- matching characters, and the documenting of what the various items in
- the --stats output mean.
-
- - Various new and updated diffs in the patches dir, including: acls.diff,
- xattrs.diff, atimes.diff, detect-renamed.diff, and slp.diff.
+ - Added the --log-file=FILE and --log-file-format=FORMAT options. These
+ can be used to tell any rsync to output what it is doing to a log file.
+ They work with a client rsync, a non-daemon server rsync (see the man
+ page for instructions), and also allows the overriding of rsyncd.conf
+ settings when starting a daemon.
+
+ - The --log-format option was renamed to be --out-format to avoid confusing
+ it with affecting the log-file output. (The old option remains as an
+ alias for the new to preserve backward compatibility.)
+
+ - Made "log file" and "syslog facility" settable on a per-module basis in
+ the daemon's config file.
+
+ - Added the --remove-source-files option as a replacement for the (now
+ deprecated) --remove-sent-files option. This new option removes all
+ non-dirs from the source directories, even if the file was already
+ up-to-date. This fixes a problem where interrupting an rsync that
+ was using --remove-sent-files and restarting it could leave behind
+ a file that the earlier rsync synchronized, but didn't get to remove.
+ (The deprecated --remove-sent-files is still understood for now, and
+ still behaves in the same way as before.)
+
+ - Added a new environment variable to the pre-/post-xfer exec commands (in
+ the daemon's config file): RSYNC_PID. This value will be the same in
+ both the pre- and post-xfer commands, so it can be used if the pre-xfer
+ command wants to cache some arg/request info for the post-xfer command.