-NEWS for rsync 2.6.7 (UNRELEASED)
-Protocol: 29 (unchanged)
-Changes since 2.6.6:
+NEWS for rsync 3.1.0 (UNRELEASED)
+Protocol: 31 (changed)
+Changes since 3.0.4:
OUTPUT CHANGES:
- - The letter 'D' in the itemized output was being used for both devices
- (character or block) as well as other special files (such as fifos and
- named sockets). This has changed to separate non-device special files
- under the 'S' designation (e.g. "cS+++++++ path/fifo"). See also the
- "--specials" option, below.
-
- - The way rsync escapes unreadable characters has changed. First, rsync
- now has support for recognizing valid multibyte character sequences in
- your current locale, allowing it to escape fewer characters than before
- for a locale such as UTF-8. Second, it now uses an escape idiom of
- "\#123", which is the literal string "\#" followed by exactly 3 octal
- digits. Rsync no longer doubles a backslash character in a filename
- (e.g. it used to output "foo\\bar" when copying "foo\bar") -- now it only
- escapes a backslash that is followed by a hash-sign and 3 digits (0-9)
- (e.g. it will output "foo\#134#789" when copying "foo\#789"). See also
- the --8-bit-output (-8) option, mentioned below.
-
- Script writers: the local rsync is the one that outputs escaped names,
- so if you need to support unescaping of filenames for older rsyncs, I'd
- suggest that you parse the output of "rsync --version" and only use the
- old unescaping rules for 2.6.5 and 2.6.6.
+ - Output numbers in 3-digit groups by default (e.g. 1,234,567). See the
+ --human-readable option for a way to turn it off. See also the daemon's
+ "log format" parameter and related command-line options (including
+ --out-format) for a modifier that can be used to request digit-grouping
+ or human-readable output in log escapes. (Note that log output is
+ unchanged by default.) When some level of human-readable output is
+ enabled, the column width for the file size in the --list-only output
+ is increased.
+
+ - The output of the --progress option has changed: the string "xfer" was
+ shortened to "xfr", and the string "to-check" was shortened to "to-chk",
+ both designed to make room for the (by default) wider display of file
+ size numbers without making the total line-length longer. Also, when
+ incremental recursion is enabled, the string "ir-chk" will be used
+ instead of "to-chk" up until the incremental-recursion scan is done,
+ letting you know that the value to check and the total value will still
+ be increasing as new files are found.
+
+ - Enhanced the --stats output: 1) to mention how many files were created
+ (protocol >= 28), 2) to mention how many files were deleted (new for
+ protocol 31, but only output when --delete is in effect), and 3) to
+ follow the file-count, created-count, and deleted-count with a subcount
+ list broken down by type.
BUG FIXES:
- - Fixed a really old bug that caused --checksum (-c) to checksum all the
- files encountered during the delete scan (ouch).
+ - Changed the way --progress overwrites its prior output in order to make
+ it nearly impossible for the progress to get overwritten by an error.
- - Fixed a potential hang in a remote generator: when the receiver gets a
- read-error on the socket, it now signals the generator about this so that
- the generator does not try to send any of the terminating error messages
- to the client (avoiding a potential hang in some setups).
+ - Fixed some rare bugs in --iconv processing that might cause a multibyte
+ character to get translated incorrectly.
- - Made hard-links work with symlinks and devices again.
-
- - If the sender gets an early EOF reading a source file, we propagate this
- error to the receiver so that it can discard the file and try requesting
- it again (which is the existing behavior for other kinds of read errors).
-
- - If a device-file/special-file changes permissions, rsync now updates the
- permissions without recreating the file.
-
- - If the user specifies a remote-host for both the source and destination,
- we now output a syntax error rather than trying to open the destination
- hostspec as a filename.
-
- - When --inplace creates a new destination file, rsync now creates it with
- permissions 0600 instead of 0000 -- this makes restarting possible when
- the transfer gets interrupted in the middle of sending a new file.
-
- - Reject the combination of --inplace and --sparse since the sparse-output
- algorithm doesn't work when overwriting existing data.
-
- - Fixed the directory name in the error that is output when pop_dir()
- fails.
-
- - Really fixed the parsing of a "!" entry in .cvsignore files this time.
-
- - If the generator gets a stat() error on a file, output it (this used to
- require at least -vv for the error to be seen).
-
- - If waitpid() fails or the child rsync didn't exit cleanly, we now handle
- the exit status properly and generate a better error.
-
- - Fixed some glitches in the double-verbose output when using --copy-dest,
- --link-dest, or --compare-dest. Also improved how the verbose output
- handles hard-links (within the transfer) that had an up-to-date alternate
- "dest" file, and copied files (via --copy-dest).
-
- - Fixed the matching of the dont-compress items (e.g. *.gz) against files
- that have a path component containing a slash.
-
- - If code reading a filter/exclude file an EINTR error, rsync now clears
- the error flag on the file handle so it can keep on reading.
-
- - If --relative is active, the sending side cleans up trailing "/" or "/."
- suffixes to avoid triggering a bug in older rsync versions. Also, we now
- reject a ".." dir if it would be sent as a relative dir.
-
- - If a non-directory is in the way of a directory and rsync is run with
- --dry-run and --delete, rsync no longer complains about not being able
- to opendir() the not-yet present directory.
-
- - When --list-only is used and a non-existent local destination dir was
- also specified as a destination, rsync no longer generates a warning
- about being unable to create the missing directory.
-
- - Fixed some problems with --relative --no-implied-dirs when the
- destination directory did not yet exist: we can now create a symlink or
- device when it is the first thing in the missing dir, and --fuzzy no
- longer complains about being unable to open the missing dir.
-
- - Got rid of the need for --force to be used in some circumstances with
- --delete-after (making it consistent with --delete-before/-during).
-
- - Rsync now ignores the SIGXFSZ signal, just in case your OS sends this
- when a file is too large (rsync handles the write error).
+ - Improved the propagation of abnormal-exit error messages. This should
+ help the client side to receive errors from the server when it is exiting
+ abnormally, and should also avoid dying with an "connection unexpectedly
+ closed" exit when the closed connection is really expected.
ENHANCEMENTS:
- - Added the --append option that makes rsync append data onto files that
- are longer on the source than the destination (this includes new files).
-
- - Added the --min-size=SIZE option to exclude small files from the
- transfer.
+ - Added the --remote-option=OPT (-M OPT) command-line option that is useful
+ for things like sending a remote --log-file=FILE or --fake-super option.
- - Added the --compress-level option to allow you to set how aggressive
- rsync's compression should be (this option implies --compress).
-
- - Enhanced the parsing of the SIZE value for --min-size and --max-size to
- allow easy entry of multiples of 1000 (instead of just multiples of 1024)
- and off-by-one values too (e.g. --max-size=8mb-1).
+ - Added the --info=FLAGS and --debug=FLAGS options to allow finer-grained
+ control over what is output. Added an extra type of --progress output
+ using --info=progress2.
- - Added the --8-bit-output (-8) option, which tells rsync to avoid escaping
- high-bit characters that it thinks are unreadable in the current locale.
+ - The --msgs2stderr option can help with debugging rsync by allowing the
+ debug messages to get output to stderr rather than travel via the socket
+ protocol.
- - The new option --human-readable (-h) changes the output of --progress,
- --stats, and the end-of-run summary to be easier to read. If repeated,
- the units become powers of 1024 instead of powers of 1000. (The old
- meaning of -h, as a shorthand for --help, still works as long as you
- just use it on its own, as in "rsync -h".)
+ - Added the --delete-missing-args and --ignore-missing-args options to
+ either delete or ignore user-specified files on the receiver that are
+ missing on the sender (normally the absence of user-specified files
+ generates an error).
- - If lutimes() and/or lchmod() are around, use them to allow the
- preservation of attributes on symlinks.
+ - Added a "T" (terabyte) category to the --human-readable size suffixes.
- - The --link-dest option now affects symlinks and devices (when possible).
+ - Added the --usermap/--groupmap/--chown options for manipulating file
+ ownership during the copy.
- - Added two config items to the rsyncd.conf parsing: "pre-xfer exec" and
- "post-xfer exec". These allow a command to be specified on a per-module
- basis that will be run before and/or after a daemon-mode transfer. (See
- the man page for a list of the environment variables that are set with
- information about the transfer.)
+ - Added the "%C" escape to the log-output handling, which will output the
+ MD5 checksum of any transferred file, or all files if --checksum was
+ specified (when protocol 30 or above is in effect).
- - When using the --relative option, you can now insert a dot dir in
- the source path to indicate where the replication of the source dirs
- should start. For example, if you specify a source path of
- rsync://host/module/foo/bar/./baz/dir with -R, rsync will now only
- replicate the "baz/dir" part of the source path (note: a trailing
- dot dir is unaffected unless it also has a trailing slash).
-
- - Added some new --no-FOO options that make it easier to override unwanted
- implied or default options. For example, "-a --no-o" (aka "--archive
- --no-owner") can be used to turn off the preservation of file ownership
- that is implied by -a.
+ - Added the "reverse lookup" parameter to the rsync daemon config file to
+ allow reverse-DNS lookups to be disabled.
- - Added the --chmod=MODE option that allows the destination permissions to
- be changed from the source permissions. E.g. --chmod=g+w,o-rwx
+ - Added a way for more than one group to be specified in the daemon's
+ config file, including a way to specify that you want all of the
+ specified user's groups without having to name them. Also changed the
+ daemon to complain about an inability to set explicitly-specified uid/gid
+ values, even when not run by a super-user.
- - Added the "incoming chmod" and "outgoing chmod" daemon options that allow
- a module to specify what permissions changes should be applied to all
- files copied to and from the daemon.
+ - Added a way to reference environment variables in a daemon's config file
+ (using %VAR% references).
- - Allow the --temp-dir option to be specified when starting a daemon, which
- sets the default temporary directory for incoming files.
+ - When replacing a non-dir with a symlink/hard-link/device/special-file,
+ the update should now be done in an atomic manner.
- - If --delete is combined with --dirs without --recursive, rsync will now
- delete in any directory whose content is being synchronized.
+ - Fixed a free of the wrong pointer in uncache_tmp_xattrs() (which only
+ sometimes affects an --xattr transfer when --backup is used).
- - If --backup is combined with --delete without --backup-dir (and without
- --delete-excluded), we add a "protect" filter-rule to ensure that files
- with the backup suffix are not deleted.
+ - When backing up a file, try to hard-link the file into place so that the
+ upcoming replacement of the destination file will be atomic.
- - The file-count stats that are output by --progress were improved to
- better indicate what the numbers mean. For instance, the output:
- "(xfer#5, to-check=8383/9999)" indicates that this was the fifth file
- to be transferred, and we still need to check 8383 more files out of
- a total of 9999.
+ - Added the ability to synchronize nano-second modified times.
- - The include/exclude code now allows a dir/*** directive (with 3 trailing
- stars) to match both the dir itself as well as all the content below the
- dir (dir/** would not match the dir).
+ - Added a few more default suffixes for the "dont compress" settings.
- - Added the --prune-empty-dirs (-m) option that makes the receiving rsync
- discard empty chains of directories from the file-list. This makes it
- easier to selectively copy files from a source hierarchy and end up with
- just the directories needed to hold the resulting files.
+ - Added the checking of the RSYNC_PROTECT_ARGS environment variable to allow
+ the default for the --protect-args command-line option to be overridden.
- - If the --itemize-changes (-i) option is repeated, rsync now includes
- unchanged files in the itemized output (similar to -vv, but without all
- the other verbose messages that can get in the way). Of course, the
- client must be version 2.6.7 for this to work, but the remote rsync only
- needs to be 2.6.7 if you're pushing files.
+ - Added some Solaris xattr code.
- - Added the --specials option to tell rsync to copy non-device special
- files (which rsync now attempts even as a normal user). The --devices
- option now requests the copying of just devices (character and block).
- The -D option still requests both (e.g. --devices and --specials), -a
- still implies -D, and non-root users still get a silent downgrade that
- omits device copying.
+ EXTRAS:
- - Added the --super option to make the receiver always attempt super-user
- activities. This is useful for systems that allow things such as devices
- to be created or ownership to be set without being UID 0, and is also
- useful for someone who wants to ensure that errors will be output if the
- receiving rsync isn't being run as root.
+ - Added an "instant-rsyncd" script to the support directory, which makes
+ it easy to configure a simple rsync daemon in the current directory.
- - Added the --sockopts option for those few who want to customize the TCP
- options used to contact a daemon rsync.
-
- - Added a way for the --temp-dir option to be combined with a partial-dir
- setting that lets rsync avoid non-atomic updates (for those times when
- --temp-dir is not being used because space is tight).
-
- - A new support script, files-to-excludes, will transform a list of files
- into a set of include/exclude directives that will copy those files.
-
- - A new option, --executability (-E) can be used to preserve just the
- execute bit on files, for those times when using the --perms option is
- not desired.
-
- - The daemon now logs each connection and also each module-list request
- that it receives.
-
- - New log-format options: %M (modtime), %U (uid), %G (gid), and %B
- (permission bits, e.g. "rwxr-xrwt").
-
- - The --dry-run option no longer forces the enabling of --verbose.
-
- - The --remove-sent-files option now does a better job of incrementally
- removing the sent files on the sending side (older versions tended to
- clump up all the removals at the end).
-
- - A daemon now supersedes its minimal SIGCHLD handler with the standard
- PID-remembering version after forking to handle the request. This
- ensures that the generator can get the child-exit status from the
- receiver.
-
- - Use of the --bwlimit option no longer interferes with the remote rsync
- sending error messages about invalid/refused options.
-
- - Rsync no longer returns a usage error when used with one local source arg
- and no destination: this now implies the --list-only option, just like
- the comparable situation with a remote source arg.
-
- - Various documentation improvements, including: a better synopsis, some
- improved examples, a better discussion of the presence and absence of
- --perms (including how it interacts with the new --executability and
- --chmod options), an extended discussion of --temp-dir, an improved
- discussion of --partial-dir, a better description of rsync's pattern
- matching characters, and the documenting of what the various items in
- the --stats output mean.
-
- - Various new and updated diffs in the patches dir, including: acls.diff,
- xattrs.diff, atimes.diff, detect-renamed.diff, and slp.diff.
+ - Added the "mapfrom" and "mapto" scripts to the support directory, which
+ makes it easier to do user/group mapping in a local transfer based on
+ passwd/group files from another machine.
INTERNAL:
- - We now use sigaction() and sigprocmask() if possible, and fall back on
- signal() if not. Using sigprocmask() ensures that rsync enables all the
- signals that it needs, just in case it was started in a masked state.
-
- - Some buffer sizes were expanded a bit, particularly on systems where
- MAXPATHLEN is overly small (e.g. cygwin).
+ - The I/O code was rewritten to be simpler and do bigger buffered reads
+ over the socket. The I/O between the receiver and the generator was
+ changed to be standard multiplexed-I/O (like that over the socket).
- - If io_printf() tries to format more data than fits in the buffer, exit
- with an error instead of transmitting a truncated buffer.
+ - The sender tries to use any dead time while the generator is looking for
+ files to transfer in order to do sender-side directory scanning in a more
+ parallel manner.
- - If a va_copy macro is defined, lib/snprintf.c will use it when defining
- the VA_COPY macro.
+ - A daemon can now inform a client about a daemon-configured timeout value
+ so that the client can assist in the keep-alive activity (protocol 31).
- - Reduced the amount of stack memory needed for each level of directory
- recursion by nearly MAXPATHLEN bytes.
+ - The filter code received some refactoring to make it more extendable, to
+ read better, and do better sanity checking.
- - The wildmatch function was extended to allow an array of strings to be
- supplied as the string to match. This allows the exclude code to do less
- string copying.
+ - Really big numbers are now output using our own big-num routine rather
+ than casting them to a double and using a %.0f conversion.
- - Got rid of the safe_fname() function (and all the myriad calls) and
- replaced it with a new function in the log.c code that filters all the
- output going to the terminal.
+ - The pool_alloc library has received some minor improvements in alignment
+ handling.
- - Unified the f_name() and the f_name_to() functions.
+ - Added init_stat_x() function to avoid duplication of acl/xattr init code.
DEVELOPER RELATED:
- - The diffs in the patches dir now require "patch -p1 <DIFF" instead of
- the previous -p0. Also, the version included in the release tar now
- affect generated files (e.g. configure, rsync.1, proto.h, etc.), so
- it is no longer necessary to run autoconf and/or yodl unless you're
- applying a patch that was checked out from CVS.
-
- - Several diffs in the patches dir now use the proper --enable-FOO
- configure option instead of --with-FOO to turn on the inclusion of
- the newly patched feature.
-
- - There is a new script, "prepare-source" than can be used to update the
- various generated files (proto.h, configure, etc.) even before configure
- has created the Makefile (this is mainly useful when patching the source
- with a patch that doesn't affect generated files).
-
- - The testsuite now sets HOME so that it won't be affected by a file such
- as ~/.popt.
+ - Added more conditional debug output.