My modified version of Chris Shoemaker's improved batch-file handling.

[rsync/rsync.git] / token.c

/*
   Copyright (C) Andrew Tridgell 1996
   Copyright (C) Paul Mackerras 1996

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include "rsync.h"
#include "zlib/zlib.h"

extern int do_compression;
extern int module_id;

static int compression_level = Z_DEFAULT_COMPRESSION;

/* determine the compression level based on a wildcard filename list */
void set_compression(char *fname)
{
	char *dont;
	char *tok;

	if (!do_compression)
		return;

	compression_level = Z_DEFAULT_COMPRESSION;
	dont = lp_dont_compress(module_id);

	if (!dont || !*dont)
		return;

	if (dont[0] == '*' && !dont[1]) {
		/* an optimization to skip the rest of this routine */
		compression_level = 0;
		return;
	}

	dont = strdup(dont);
	fname = strdup(fname);
	if (!dont || !fname)
		return;

	strlower(dont);
	strlower(fname);

	for (tok = strtok(dont, " "); tok; tok = strtok(NULL, " ")) {
		if (wildmatch(tok, fname)) {
			compression_level = 0;
			break;
		}
	}
	free(dont);
	free(fname);
}

/* non-compressing recv token */
static int simple_recv_token(int f,char **data)
{
	static int residue;
	static char *buf;
	int n;

	if (!buf) {
		buf = new_array(char, CHUNK_SIZE);
		if (!buf)
			out_of_memory("simple_recv_token");
	}

	if (residue == 0) {
		int i = read_int(f);
		if (i <= 0)
			return i;
		residue = i;
	}

	*data = buf;
	n = MIN(CHUNK_SIZE,residue);
	residue -= n;
	read_buf(f,buf,n);
	return n;
}


/* non-compressing send token */
static void simple_send_token(int f,int token,
			      struct map_struct *buf,OFF_T offset,int n)
{
	if (n > 0) {
		int l = 0;
		while (l < n) {
			int n1 = MIN(CHUNK_SIZE,n-l);
			write_int(f,n1);
			write_buf(f,map_ptr(buf,offset+l,n1),n1);
			l += n1;
		}
	}
	/* a -2 token means to send data only and no token */
	if (token != -2) {
		write_int(f,-(token+1));
	}
}


/* Flag bytes in compressed stream are encoded as follows: */
#define END_FLAG	0	/* that's all folks */
#define TOKEN_LONG	0x20	/* followed by 32-bit token number */
#define TOKENRUN_LONG	0x21	/* ditto with 16-bit run count */
#define DEFLATED_DATA	0x40	/* + 6-bit high len, then low len byte */
#define TOKEN_REL	0x80	/* + 6-bit relative token number */
#define TOKENRUN_REL	0xc0	/* ditto with 16-bit run count */

#define MAX_DATA_COUNT	16383	/* fit 14 bit count into 2 bytes with flags */

/* zlib.h says that if we want to be able to compress something in a single
 * call, avail_out must be at least 0.1% larger than avail_in plus 12 bytes.
 * We'll add in 0.1%+16, just to be safe (and we'll avoid floating point,
 * to ensure that this is a compile-time value). */
#define AVAIL_OUT_SIZE(avail_in_size) ((avail_in_size)*1001/1000+16)

/* For coding runs of tokens */
static int last_token = -1;
static int run_start;
static int last_run_end;

/* Deflation state */
static z_stream tx_strm;

/* Output buffer */
static char *obuf;

/* We want obuf to be able to hold both MAX_DATA_COUNT+2 bytes as well as
 * AVAIL_OUT_SIZE(CHUNK_SIZE) bytes, so make sure that it's large enough. */
#if MAX_DATA_COUNT+2 > AVAIL_OUT_SIZE(CHUNK_SIZE)
#define OBUF_SIZE	(MAX_DATA_COUNT+2)
#else
#define OBUF_SIZE	AVAIL_OUT_SIZE(CHUNK_SIZE)
#endif

/* Send a deflated token */
static void
send_deflated_token(int f, int token,
		    struct map_struct *buf, OFF_T offset, int nb, int toklen)
{
	int n, r;
	static int init_done, flush_pending;

	if (last_token == -1) {
		/* initialization */
		if (!init_done) {
			tx_strm.next_in = NULL;
			tx_strm.zalloc = NULL;
			tx_strm.zfree = NULL;
			if (deflateInit2(&tx_strm, compression_level,
					 Z_DEFLATED, -15, 8,
					 Z_DEFAULT_STRATEGY) != Z_OK) {
				rprintf(FERROR, "compression init failed\n");
				exit_cleanup(RERR_STREAMIO);
			}
			if ((obuf = new_array(char, OBUF_SIZE)) == NULL)
				out_of_memory("send_deflated_token");
			init_done = 1;
		} else
			deflateReset(&tx_strm);
		last_run_end = 0;
		run_start = token;
		flush_pending = 0;

	} else if (last_token == -2) {
		run_start = token;

	} else if (nb != 0 || token != last_token + 1
		   || token >= run_start + 65536) {
		/* output previous run */
		r = run_start - last_run_end;
		n = last_token - run_start;
		if (r >= 0 && r <= 63) {
			write_byte(f, (n==0? TOKEN_REL: TOKENRUN_REL) + r);
		} else {
			write_byte(f, (n==0? TOKEN_LONG: TOKENRUN_LONG));
			write_int(f, run_start);
		}
		if (n != 0) {
			write_byte(f, n);
			write_byte(f, n >> 8);
		}
		last_run_end = last_token;
		run_start = token;
	}

	last_token = token;

	if (nb != 0 || flush_pending) {
		/* deflate the data starting at offset */
		int flush = Z_NO_FLUSH;
		tx_strm.avail_in = 0;
		tx_strm.avail_out = 0;
		do {
			if (tx_strm.avail_in == 0 && nb != 0) {
				/* give it some more input */
				n = MIN(nb, CHUNK_SIZE);
				tx_strm.next_in = (Bytef *)
					map_ptr(buf, offset, n);
				tx_strm.avail_in = n;
				nb -= n;
				offset += n;
			}
			if (tx_strm.avail_out == 0) {
				tx_strm.next_out = (Bytef *)(obuf + 2);
				tx_strm.avail_out = MAX_DATA_COUNT;
				if (flush != Z_NO_FLUSH) {
					/*
					 * We left the last 4 bytes in the
					 * buffer, in case they are the
					 * last 4.  Move them to the front.
					 */
					memcpy(tx_strm.next_out,
					       obuf+MAX_DATA_COUNT-2, 4);
					tx_strm.next_out += 4;
					tx_strm.avail_out -= 4;
				}
			}
			if (nb == 0 && token != -2)
				flush = Z_SYNC_FLUSH;
			r = deflate(&tx_strm, flush);
			if (r != Z_OK) {
				rprintf(FERROR, "deflate returned %d\n", r);
				exit_cleanup(RERR_STREAMIO);
			}
			if (nb == 0 || tx_strm.avail_out == 0) {
				n = MAX_DATA_COUNT - tx_strm.avail_out;
				if (flush != Z_NO_FLUSH) {
					/*
					 * We have to trim off the last 4
					 * bytes of output when flushing
					 * (they are just 0, 0, ff, ff).
					 */
					n -= 4;
				}
				if (n > 0) {
					obuf[0] = DEFLATED_DATA + (n >> 8);
					obuf[1] = n;
					write_buf(f, obuf, n+2);
				}
			}
		} while (nb != 0 || tx_strm.avail_out == 0);
		flush_pending = token == -2;
	}

	if (token == -1) {
		/* end of file - clean up */
		write_byte(f, END_FLAG);
	} else if (token != -2) {
		/* add the data in the current block to the compressor's
		   history and hash table */
		tx_strm.next_in = (Bytef *) map_ptr(buf, offset, toklen);
		tx_strm.avail_in = toklen;
		tx_strm.next_out = (Bytef *) obuf;
		tx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
		r = deflate(&tx_strm, Z_INSERT_ONLY);
		if (r != Z_OK || tx_strm.avail_in != 0) {
			rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n",
				r, tx_strm.avail_in);
			exit_cleanup(RERR_STREAMIO);
		}
	}
}


/* tells us what the receiver is in the middle of doing */
static enum { r_init, r_idle, r_running, r_inflating, r_inflated } recv_state;

/* for inflating stuff */
static z_stream rx_strm;
static char *cbuf;
static char *dbuf;

/* for decoding runs of tokens */
static int rx_token;
static int rx_run;

/* Receive a deflated token and inflate it */
static int
recv_deflated_token(int f, char **data)
{
	int n, r, flag;
	static int init_done;
	static int saved_flag;

	for (;;) {
		switch (recv_state) {
		case r_init:
			if (!init_done) {
				rx_strm.next_out = NULL;
				rx_strm.zalloc = NULL;
				rx_strm.zfree = NULL;
				if (inflateInit2(&rx_strm, -15) != Z_OK) {
					rprintf(FERROR, "inflate init failed\n");
					exit_cleanup(RERR_STREAMIO);
				}
				if (!(cbuf = new_array(char, MAX_DATA_COUNT))
				    || !(dbuf = new_array(char, AVAIL_OUT_SIZE(CHUNK_SIZE))))
					out_of_memory("recv_deflated_token");
				init_done = 1;
			} else {
				inflateReset(&rx_strm);
			}
			recv_state = r_idle;
			rx_token = 0;
			break;

		case r_idle:
		case r_inflated:
			if (saved_flag) {
				flag = saved_flag & 0xff;
				saved_flag = 0;
			} else
				flag = read_byte(f);
			if ((flag & 0xC0) == DEFLATED_DATA) {
				n = ((flag & 0x3f) << 8) + read_byte(f);
				read_buf(f, cbuf, n);
				rx_strm.next_in = (Bytef *)cbuf;
				rx_strm.avail_in = n;
				recv_state = r_inflating;
				break;
			}
			if (recv_state == r_inflated) {
				/* check previous inflated stuff ended correctly */
				rx_strm.avail_in = 0;
				rx_strm.next_out = (Bytef *)dbuf;
				rx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
				r = inflate(&rx_strm, Z_SYNC_FLUSH);
				n = AVAIL_OUT_SIZE(CHUNK_SIZE) - rx_strm.avail_out;
				/*
				 * Z_BUF_ERROR just means no progress was
				 * made, i.e. the decompressor didn't have
				 * any pending output for us.
				 */
				if (r != Z_OK && r != Z_BUF_ERROR) {
					rprintf(FERROR, "inflate flush returned %d (%d bytes)\n",
						r, n);
					exit_cleanup(RERR_STREAMIO);
				}
				if (n != 0 && r != Z_BUF_ERROR) {
					/* have to return some more data and
					   save the flag for later. */
					saved_flag = flag + 0x10000;
					*data = dbuf;
					return n;
				}
				/*
				 * At this point the decompressor should
				 * be expecting to see the 0, 0, ff, ff bytes.
				 */
				if (!inflateSyncPoint(&rx_strm)) {
					rprintf(FERROR, "decompressor lost sync!\n");
					exit_cleanup(RERR_STREAMIO);
				}
				rx_strm.avail_in = 4;
				rx_strm.next_in = (Bytef *)cbuf;
				cbuf[0] = cbuf[1] = 0;
				cbuf[2] = cbuf[3] = 0xff;
				inflate(&rx_strm, Z_SYNC_FLUSH);
				recv_state = r_idle;
			}
			if (flag == END_FLAG) {
				/* that's all folks */
				recv_state = r_init;
				return 0;
			}

			/* here we have a token of some kind */
			if (flag & TOKEN_REL) {
				rx_token += flag & 0x3f;
				flag >>= 6;
			} else
				rx_token = read_int(f);
			if (flag & 1) {
				rx_run = read_byte(f);
				rx_run += read_byte(f) << 8;
				recv_state = r_running;
			}
			return -1 - rx_token;

		case r_inflating:
			rx_strm.next_out = (Bytef *)dbuf;
			rx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
			r = inflate(&rx_strm, Z_NO_FLUSH);
			n = AVAIL_OUT_SIZE(CHUNK_SIZE) - rx_strm.avail_out;
			if (r != Z_OK) {
				rprintf(FERROR, "inflate returned %d (%d bytes)\n", r, n);
				exit_cleanup(RERR_STREAMIO);
			}
			if (rx_strm.avail_in == 0)
				recv_state = r_inflated;
			if (n != 0) {
				*data = dbuf;
				return n;
			}
			break;

		case r_running:
			++rx_token;
			if (--rx_run == 0)
				recv_state = r_idle;
			return -1 - rx_token;
		}
	}
}

/*
 * put the data corresponding to a token that we've just returned
 * from recv_deflated_token into the decompressor's history buffer.
 */
static void see_deflate_token(char *buf, int len)
{
	int r, blklen;
	unsigned char hdr[5];

	rx_strm.avail_in = 0;
	blklen = 0;
	hdr[0] = 0;
	do {
		if (rx_strm.avail_in == 0 && len != 0) {
			if (blklen == 0) {
				/* Give it a fake stored-block header. */
				rx_strm.next_in = (Bytef *)hdr;
				rx_strm.avail_in = 5;
				blklen = len;
				if (blklen > 0xffff)
					blklen = 0xffff;
				hdr[1] = blklen;
				hdr[2] = blklen >> 8;
				hdr[3] = ~hdr[1];
				hdr[4] = ~hdr[2];
			} else {
				rx_strm.next_in = (Bytef *)buf;
				rx_strm.avail_in = blklen;
				len -= blklen;
				blklen = 0;
			}
		}
		rx_strm.next_out = (Bytef *)dbuf;
		rx_strm.avail_out = AVAIL_OUT_SIZE(CHUNK_SIZE);
		r = inflate(&rx_strm, Z_SYNC_FLUSH);
		if (r != Z_OK) {
			rprintf(FERROR, "inflate (token) returned %d\n", r);
			exit_cleanup(RERR_STREAMIO);
		}
	} while (len || rx_strm.avail_out == 0);
}

/**
 * Transmit a verbatim buffer of length @p n followed by a token.
 * If token == -1 then we have reached EOF
 * If n == 0 then don't send a buffer
 */
void send_token(int f,int token,struct map_struct *buf,OFF_T offset,
		int n,int toklen)
{
	if (!do_compression) {
		simple_send_token(f,token,buf,offset,n);
	} else {
		send_deflated_token(f, token, buf, offset, n, toklen);
	}
}


/*
 * receive a token or buffer from the other end. If the reurn value is >0 then
 * it is a data buffer of that length, and *data will point at the data.
 * if the return value is -i then it represents token i-1
 * if the return value is 0 then the end has been reached
 */
int recv_token(int f,char **data)
{
	int tok;

	if (!do_compression) {
		tok = simple_recv_token(f,data);
	} else {
		tok = recv_deflated_token(f, data);
	}
	return tok;
}

/*
 * look at the data corresponding to a token, if necessary
 */
void see_token(char *data, int toklen)
{
	if (do_compression)
		see_deflate_token(data, toklen);
}