Tweaked sizing checks in perform_io().
[rsync/rsync.git] / io.c
... / ...
CommitLineData
1/*
2 * Socket and pipe I/O utilities used in rsync.
3 *
4 * Copyright (C) 1996-2001 Andrew Tridgell
5 * Copyright (C) 1996 Paul Mackerras
6 * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7 * Copyright (C) 2003-2009 Wayne Davison
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 3 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License along
20 * with this program; if not, visit the http://fsf.org website.
21 */
22
23/* Rsync provides its own multiplexing system, which is used to send
24 * stderr and stdout over a single socket.
25 *
26 * For historical reasons this is off during the start of the
27 * connection, but it's switched on quite early using
28 * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30#include "rsync.h"
31#include "ifuncs.h"
32#include "inums.h"
33
34/** If no timeout is specified then use a 60 second select timeout */
35#define SELECT_TIMEOUT 60
36
37extern int bwlimit;
38extern size_t bwlimit_writemax;
39extern int io_timeout;
40extern int am_server;
41extern int am_daemon;
42extern int am_sender;
43extern int am_generator;
44extern int msgs2stderr;
45extern int inc_recurse;
46extern int io_error;
47extern int eol_nulls;
48extern int flist_eof;
49extern int file_total;
50extern int file_old_total;
51extern int list_only;
52extern int read_batch;
53extern int protect_args;
54extern int checksum_seed;
55extern int protocol_version;
56extern int remove_source_files;
57extern int preserve_hard_links;
58extern BOOL extra_flist_sending_enabled;
59extern struct stats stats;
60extern struct file_list *cur_flist;
61#ifdef ICONV_OPTION
62extern int filesfrom_convert;
63extern iconv_t ic_send, ic_recv;
64#endif
65
66int csum_length = SHORT_SUM_LENGTH; /* initial value */
67int allowed_lull = 0;
68int ignore_timeout = 0;
69int batch_fd = -1;
70int msgdone_cnt = 0;
71int forward_flist_data = 0;
72
73/* Ignore an EOF error if non-zero. See whine_about_eof(). */
74int kluge_around_eof = 0;
75
76int sock_f_in = -1;
77int sock_f_out = -1;
78
79int64 total_data_read = 0;
80int64 total_data_written = 0;
81
82static struct {
83 xbuf in, out, msg;
84 int in_fd;
85 int out_fd; /* Both "out" and "msg" go to this fd. */
86 BOOL in_multiplexed;
87 unsigned out_empty_len;
88 size_t raw_data_header_pos; /* in the out xbuf */
89 size_t raw_flushing_ends_before; /* in the out xbuf */
90 size_t raw_input_ends_before; /* in the in xbuf */
91} iobuf = { .in_fd = -1, .out_fd = -1 };
92
93static time_t last_io_in;
94static time_t last_io_out;
95
96static int write_batch_monitor_in = -1;
97static int write_batch_monitor_out = -1;
98
99static int ff_forward_fd = -1;
100static int ff_reenable_multiplex = -1;
101static char ff_lastchar = '\0';
102static xbuf ff_xb = EMPTY_XBUF;
103#ifdef ICONV_OPTION
104static xbuf iconv_buf = EMPTY_XBUF;
105#endif
106static int select_timeout = SELECT_TIMEOUT;
107static int active_filecnt = 0;
108static OFF_T active_bytecnt = 0;
109static int first_message = 1;
110
111static char int_byte_extra[64] = {
112 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
113 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
114 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
115 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
116};
117
118#define IN_MULTIPLEXED (iobuf.in_multiplexed)
119#define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
120
121#define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
122#define PIO_NEED_OUTROOM (1<<1)
123#define PIO_NEED_MSGROOM (1<<2)
124
125#define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
126
127#define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
128#define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
129
130#define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
131#define REMOTE_OPTION_ERROR2 ": unknown option"
132
133#define FILESFROM_BUFLEN 2048
134
135enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
136
137static flist_ndx_list redo_list, hlink_list;
138
139static void sleep_for_bwlimit(int bytes_written);
140
141static void check_timeout(void)
142{
143 time_t t;
144
145 if (!io_timeout || ignore_timeout)
146 return;
147
148 if (!last_io_in) {
149 last_io_in = time(NULL);
150 return;
151 }
152
153 t = time(NULL);
154
155 if (t - last_io_in >= io_timeout) {
156 if (!am_server && !am_daemon) {
157 rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
158 (int)(t-last_io_in));
159 }
160 exit_cleanup(RERR_TIMEOUT);
161 }
162}
163
164/* It's almost always an error to get an EOF when we're trying to read from the
165 * network, because the protocol is (for the most part) self-terminating.
166 *
167 * There is one case for the receiver when it is at the end of the transfer
168 * (hanging around reading any keep-alive packets that might come its way): if
169 * the sender dies before the generator's kill-signal comes through, we can end
170 * up here needing to loop until the kill-signal arrives. In this situation,
171 * kluge_around_eof will be < 0.
172 *
173 * There is another case for older protocol versions (< 24) where the module
174 * listing was not terminated, so we must ignore an EOF error in that case and
175 * exit. In this situation, kluge_around_eof will be > 0. */
176static NORETURN void whine_about_eof(int fd)
177{
178 if (kluge_around_eof && fd == sock_f_in) {
179 int i;
180 if (kluge_around_eof > 0)
181 exit_cleanup(0);
182 /* If we're still here after 10 seconds, exit with an error. */
183 for (i = 10*1000/20; i--; )
184 msleep(20);
185 }
186
187 rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
188 "(%s bytes received so far) [%s]\n",
189 big_num(stats.total_read), who_am_i());
190
191 exit_cleanup(RERR_STREAMIO);
192}
193
194/* Do a safe read, handling any needed looping and error handling.
195 * Returns the count of the bytes read, which will only be different
196 * from "len" if we encountered an EOF. This routine is not used on
197 * the socket except very early in the transfer. */
198static size_t safe_read(int fd, char *buf, size_t len)
199{
200 size_t got;
201 int n;
202
203 assert(fd != iobuf.in_fd);
204
205 n = read(fd, buf, len);
206 if ((size_t)n == len || n == 0) {
207 if (DEBUG_GTE(IO, 2))
208 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
209 return n;
210 }
211 if (n < 0) {
212 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
213 read_failed:
214 rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
215 (long)len, who_am_i());
216 exit_cleanup(RERR_STREAMIO);
217 }
218 got = 0;
219 } else
220 got = n;
221
222 while (1) {
223 struct timeval tv;
224 fd_set r_fds, e_fds;
225 int cnt;
226
227 FD_ZERO(&r_fds);
228 FD_SET(fd, &r_fds);
229 FD_ZERO(&e_fds);
230 FD_SET(fd, &e_fds);
231 tv.tv_sec = select_timeout;
232 tv.tv_usec = 0;
233
234 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
235 if (cnt <= 0) {
236 if (cnt < 0 && errno == EBADF) {
237 rsyserr(FERROR, errno, "safe_read select failed [%s]",
238 who_am_i());
239 exit_cleanup(RERR_FILEIO);
240 }
241 check_timeout();
242 continue;
243 }
244
245 /*if (FD_ISSET(fd, &e_fds))
246 rprintf(FINFO, "select exception on fd %d\n", fd); */
247
248 if (FD_ISSET(fd, &r_fds)) {
249 n = read(fd, buf + got, len - got);
250 if (DEBUG_GTE(IO, 2))
251 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
252 if (n == 0)
253 break;
254 if (n < 0) {
255 if (errno == EINTR)
256 continue;
257 goto read_failed;
258 }
259 if ((got += (size_t)n) == len)
260 break;
261 }
262 }
263
264 return got;
265}
266
267static const char *what_fd_is(int fd)
268{
269 static char buf[20];
270
271 if (fd == sock_f_out)
272 return "socket";
273 else if (fd == iobuf.out_fd)
274 return "message fd";
275 else if (fd == batch_fd)
276 return "batch file";
277 else {
278 snprintf(buf, sizeof buf, "fd %d", fd);
279 return buf;
280 }
281}
282
283/* Do a safe write, handling any needed looping and error handling.
284 * Returns only if everything was successfully written. This routine
285 * is not used on the socket except very early in the transfer. */
286static void safe_write(int fd, const char *buf, size_t len)
287{
288 int n;
289
290 assert(fd != iobuf.out_fd);
291
292 n = write(fd, buf, len);
293 if ((size_t)n == len)
294 return;
295 if (n < 0) {
296 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
297 write_failed:
298 rsyserr(FERROR, errno,
299 "safe_write failed to write %ld bytes to %s [%s]",
300 (long)len, what_fd_is(fd), who_am_i());
301 exit_cleanup(RERR_STREAMIO);
302 }
303 } else {
304 buf += n;
305 len -= n;
306 }
307
308 while (len) {
309 struct timeval tv;
310 fd_set w_fds;
311 int cnt;
312
313 FD_ZERO(&w_fds);
314 FD_SET(fd, &w_fds);
315 tv.tv_sec = select_timeout;
316 tv.tv_usec = 0;
317
318 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
319 if (cnt <= 0) {
320 if (cnt < 0 && errno == EBADF) {
321 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
322 what_fd_is(fd), who_am_i());
323 exit_cleanup(RERR_FILEIO);
324 }
325 check_timeout();
326 continue;
327 }
328
329 if (FD_ISSET(fd, &w_fds)) {
330 n = write(fd, buf, len);
331 if (n < 0) {
332 if (errno == EINTR)
333 continue;
334 goto write_failed;
335 }
336 buf += n;
337 len -= n;
338 }
339 }
340}
341
342/* This is only called when files-from data is known to be available. We read
343 * a chunk of data and put it into the output buffer. */
344static void forward_filesfrom_data(void)
345{
346 int len;
347
348 len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
349 if (len <= 0) {
350 if (len == 0 || errno != EINTR) {
351 /* Send end-of-file marker */
352 ff_forward_fd = -1;
353 write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
354 free_xbuf(&ff_xb);
355 if (ff_reenable_multiplex >= 0)
356 io_start_multiplex_out(ff_reenable_multiplex);
357 }
358 return;
359 }
360
361 if (DEBUG_GTE(IO, 2))
362 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
363
364#ifdef ICONV_OPTION
365 len += ff_xb.len;
366#endif
367
368 if (!eol_nulls) {
369 char *s = ff_xb.buf + len;
370 /* Transform CR and/or LF into '\0' */
371 while (s-- > ff_xb.buf) {
372 if (*s == '\n' || *s == '\r')
373 *s = '\0';
374 }
375 }
376
377 if (ff_lastchar)
378 ff_xb.pos = 0;
379 else {
380 char *s = ff_xb.buf;
381 /* Last buf ended with a '\0', so don't let this buf start with one. */
382 while (len && *s == '\0')
383 s++, len--;
384 ff_xb.pos = s - ff_xb.buf;
385 }
386
387#ifdef ICONV_OPTION
388 if (filesfrom_convert && len) {
389 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
390 char *eob = sob + len;
391 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
392 if (ff_lastchar == '\0')
393 flags |= ICB_INIT;
394 /* Convert/send each null-terminated string separately, skipping empties. */
395 while (s != eob) {
396 if (*s++ == '\0') {
397 ff_xb.len = s - sob - 1;
398 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
399 exit_cleanup(RERR_PROTOCOL); /* impossible? */
400 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
401 while (s != eob && *s == '\0')
402 s++;
403 sob = s;
404 ff_xb.pos = sob - ff_xb.buf;
405 flags |= ICB_INIT;
406 }
407 }
408
409 if ((ff_xb.len = s - sob) == 0)
410 ff_lastchar = '\0';
411 else {
412 /* Handle a partial string specially, saving any incomplete chars. */
413 flags &= ~ICB_INCLUDE_INCOMPLETE;
414 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
415 if (errno == E2BIG)
416 exit_cleanup(RERR_PROTOCOL); /* impossible? */
417 if (ff_xb.pos)
418 memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
419 }
420 ff_lastchar = 'x'; /* Anything non-zero. */
421 }
422 } else
423#endif
424
425 if (len) {
426 char *f = ff_xb.buf + ff_xb.pos;
427 char *t = ff_xb.buf;
428 char *eob = f + len;
429 /* Eliminate any multi-'\0' runs. */
430 while (f != eob) {
431 if (!(*t++ = *f++)) {
432 while (f != eob && *f == '\0')
433 f++;
434 }
435 }
436 ff_lastchar = f[-1];
437 if ((len = t - ff_xb.buf) != 0) {
438 /* This will not circle back to perform_io() because we only get
439 * called when there is plenty of room in the output buffer. */
440 write_buf(iobuf.out_fd, ff_xb.buf, len);
441 }
442 }
443}
444
445/* Perform buffered input and output until specified conditions are met. When
446 * given a "needed" read requirement, we'll return without doing any I/O if the
447 * iobuf.in bytes are already available. When reading, we'll read as many
448 * bytes as we can into the buffer, and return as soon as we meet the minimum
449 * read requirement. When given a "needed" write requirement, we'll return
450 * without doing any I/O if that many bytes will fit in the output buffer (we
451 * check either iobuf.out or iobuf.msg, depending on the flags). When writing,
452 * we write out as much as we can, and return as soon as the given free-space
453 * requirement is available.
454 *
455 * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
456 * will need to be split when the data needs to wrap around to the start. In
457 * order to help make this easier for some operations (such as the use of
458 * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
459 * the end that is not not counted in the "size". The iobuf.in buffer is not
460 * (currently) circular. To facilitate the handling of MSG_DATA bytes as they
461 * are read-from/written-into the buffers, see the three raw_* iobuf vars.
462 *
463 * When writing, we flush data in the following priority order:
464 *
465 * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
466 *
467 * 2. Write out all the messages from the message buf (if iobuf.msg is active).
468 * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
469 * messages before getting to the iobuf.out flushing (except for rule 1).
470 *
471 * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
472 * MSG_DATA header that was pre-allocated (when output is multiplexed).
473 *
474 * TODO: items for possible future work:
475 *
476 * - Make this routine able to read the generator-to-receiver batch flow?
477 *
478 * - Make the input buffer circular?
479 *
480 * Unlike the old routines that this replaces, it is OK to read ahead as far as
481 * we can because the read_a_msg() routine now reads its bytes out of the input
482 * buffer. In the old days, only raw data was in the input buffer, and any
483 * unused raw data in the buf would prevent the reading of socket data. */
484static char *perform_io(size_t needed, int flags)
485{
486 fd_set r_fds, e_fds, w_fds;
487 struct timeval tv;
488 int cnt, max_fd;
489 size_t empty_buf_len = 0;
490 xbuf *out;
491 char *data;
492
493 if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
494 if (iobuf.raw_input_ends_before)
495 iobuf.raw_input_ends_before -= iobuf.in.pos;
496 iobuf.in.pos = 0;
497 }
498
499 switch (flags & PIO_NEED_FLAGS) {
500 case PIO_NEED_INPUT:
501 if (DEBUG_GTE(IO, 3)) {
502 rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
503 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
504 }
505
506 /* Make sure the input buffer is big enough to hold "needed" bytes.
507 * Also make sure it will fit in the free space at the end, or
508 * else we need to shift some bytes. */
509 if (needed && iobuf.in.size < needed) {
510 if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
511 out_of_memory("perform_io");
512 if (DEBUG_GTE(IO, 4)) {
513 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
514 who_am_i(), (long)iobuf.in.size, (long)needed);
515 }
516 iobuf.in.size = needed;
517 }
518 if (iobuf.in.size - iobuf.in.pos < needed
519 || (iobuf.in.len < needed && iobuf.in.len < 1024
520 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
521 memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
522 if (DEBUG_GTE(IO, 4)) {
523 rprintf(FINFO,
524 "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
525 who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
526 }
527 if (iobuf.raw_input_ends_before)
528 iobuf.raw_input_ends_before -= iobuf.in.pos;
529 iobuf.in.pos = 0;
530 }
531 break;
532
533 case PIO_NEED_OUTROOM:
534 /* We never resize the circular output buffer. */
535 if (iobuf.out.size - iobuf.out_empty_len < needed) {
536 fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
537 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
538 exit_cleanup(RERR_PROTOCOL);
539 }
540
541 if (DEBUG_GTE(IO, 3)) {
542 rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
543 who_am_i(), (long)needed,
544 iobuf.out.len + needed > iobuf.out.size
545 ? (long)(iobuf.out.len + needed - iobuf.out.size) : 0L);
546 }
547 break;
548
549 case PIO_NEED_MSGROOM:
550 /* We never resize the circular message buffer. */
551 if (iobuf.msg.size < needed) {
552 fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
553 (long)needed, (long)iobuf.msg.size);
554 exit_cleanup(RERR_PROTOCOL);
555 }
556
557 if (DEBUG_GTE(IO, 3)) {
558 rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
559 who_am_i(), (long)needed,
560 iobuf.msg.len + needed > iobuf.msg.size
561 ? (long)(iobuf.msg.len + needed - iobuf.msg.size) : 0L);
562 }
563 break;
564
565 case 0:
566 if (DEBUG_GTE(IO, 3))
567 rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
568 break;
569
570 default:
571 exit_cleanup(RERR_UNSUPPORTED);
572 }
573
574 while (1) {
575 switch (flags & PIO_NEED_FLAGS) {
576 case PIO_NEED_INPUT:
577 if (iobuf.in.len >= needed)
578 goto double_break;
579 break;
580 case PIO_NEED_OUTROOM:
581 /* Note that iobuf.out_empty_len doesn't factor into this check
582 * because iobuf.out.len already holds any needed header len. */
583 if (iobuf.out.len + needed <= iobuf.out.size)
584 goto double_break;
585 break;
586 case PIO_NEED_MSGROOM:
587 if (iobuf.msg.len + needed <= iobuf.msg.size)
588 goto double_break;
589 break;
590 }
591
592 max_fd = -1;
593
594 FD_ZERO(&r_fds);
595 FD_ZERO(&e_fds);
596 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
597 if (!read_batch || batch_fd >= 0) {
598 FD_SET(iobuf.in_fd, &r_fds);
599 FD_SET(iobuf.in_fd, &e_fds);
600 }
601 if (iobuf.in_fd > max_fd)
602 max_fd = iobuf.in_fd;
603 }
604
605 /* Only do more filesfrom processing if there is enough room in the out buffer. */
606 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
607 FD_SET(ff_forward_fd, &r_fds);
608 if (ff_forward_fd > max_fd)
609 max_fd = ff_forward_fd;
610 }
611
612 FD_ZERO(&w_fds);
613 if (iobuf.out_fd >= 0) {
614 if (iobuf.raw_flushing_ends_before
615 || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
616 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
617 size_t val;
618
619 /* The iobuf.raw_flushing_ends_before value can point off the end
620 * of the iobuf.out buffer for a while, for easier subtracting. */
621 iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
622
623 SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
624 ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
625 if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
626 /* We used some of the overflow bytes, so move them. */
627 if (DEBUG_GTE(IO, 4)) {
628 rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
629 who_am_i(), (int)val);
630 }
631 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
632 }
633
634 if (DEBUG_GTE(IO, 1)) {
635 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
636 who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
637 }
638
639 /* reserve room for the next MSG_DATA header */
640 iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
641 if (iobuf.raw_data_header_pos >= iobuf.out.size)
642 iobuf.raw_data_header_pos -= iobuf.out.size;
643 /* Yes, it is possible for this to make len > size for a while. */
644 iobuf.out.len += 4;
645 }
646
647 empty_buf_len = iobuf.out_empty_len;
648 out = &iobuf.out;
649 } else if (iobuf.msg.len) {
650 empty_buf_len = 0;
651 out = &iobuf.msg;
652 } else
653 out = NULL;
654 if (out) {
655 FD_SET(iobuf.out_fd, &w_fds);
656 if (iobuf.out_fd > max_fd)
657 max_fd = iobuf.out_fd;
658 }
659 } else
660 out = NULL;
661
662 if (max_fd < 0) {
663 switch (flags & PIO_NEED_FLAGS) {
664 case PIO_NEED_INPUT:
665 rprintf(FERROR, "error in perform_io: no fd for input.\n");
666 exit_cleanup(RERR_PROTOCOL);
667 case PIO_NEED_OUTROOM:
668 case PIO_NEED_MSGROOM:
669 msgs2stderr = 1;
670 rprintf(FERROR, "error in perform_io: no fd for output.\n");
671 exit_cleanup(RERR_PROTOCOL);
672 default:
673 /* No stated needs, so I guess this is OK. */
674 break;
675 }
676 break;
677 }
678
679 if (extra_flist_sending_enabled) {
680 if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
681 && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
682 tv.tv_sec = 0;
683 else {
684 extra_flist_sending_enabled = False;
685 tv.tv_sec = select_timeout;
686 }
687 } else
688 tv.tv_sec = select_timeout;
689 tv.tv_usec = 0;
690
691 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
692
693 if (cnt <= 0) {
694 if (cnt < 0 && errno == EBADF) {
695 msgs2stderr = 1;
696 exit_cleanup(RERR_SOCKETIO);
697 }
698 if (extra_flist_sending_enabled) {
699 extra_flist_sending_enabled = False;
700 send_extra_file_list(sock_f_out, -1);
701 extra_flist_sending_enabled = !flist_eof;
702 } else
703 check_timeout();
704 FD_ZERO(&r_fds); /* Just in case... */
705 FD_ZERO(&w_fds);
706 }
707
708 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
709 size_t pos = iobuf.in.pos + iobuf.in.len;
710 size_t len = iobuf.in.size - pos;
711 int n;
712 if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
713 if (n == 0) {
714 if (!read_batch || batch_fd < 0 || am_generator)
715 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
716 batch_fd = -1;
717 continue;
718 }
719 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
720 n = 0;
721 else {
722 /* Don't write errors on a dead socket. */
723 if (iobuf.in_fd == sock_f_in) {
724 if (am_sender)
725 msgs2stderr = 1;
726 rsyserr(FERROR_SOCKET, errno, "read error");
727 } else
728 rsyserr(FERROR, errno, "read error");
729 exit_cleanup(RERR_STREAMIO);
730 }
731 }
732 if (msgs2stderr && DEBUG_GTE(IO, 2))
733 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
734
735 if (io_timeout)
736 last_io_in = time(NULL);
737 stats.total_read += n;
738
739 iobuf.in.len += n;
740 }
741
742 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
743 size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
744 int n;
745
746 if (bwlimit_writemax && len > bwlimit_writemax)
747 len = bwlimit_writemax;
748
749 if (out->pos + len > out->size)
750 len = out->size - out->pos;
751 if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
752 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
753 n = 0;
754 else {
755 /* Don't write errors on a dead socket. */
756 msgs2stderr = 1;
757 out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
758 rsyserr(FERROR_SOCKET, errno, "[%s] write error", who_am_i());
759 exit_cleanup(RERR_STREAMIO);
760 }
761 }
762 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
763 rprintf(FINFO, "[%s] %s sent=%ld\n",
764 who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
765 }
766
767 if (io_timeout)
768 last_io_out = time(NULL);
769 stats.total_written += n;
770
771 if (bwlimit_writemax)
772 sleep_for_bwlimit(n);
773
774 if ((out->pos += n) == out->size) {
775 if (iobuf.raw_flushing_ends_before)
776 iobuf.raw_flushing_ends_before -= out->size;
777 out->pos = 0;
778 }
779 if (out->pos == iobuf.raw_flushing_ends_before)
780 iobuf.raw_flushing_ends_before = 0;
781 if ((out->len -= n) == empty_buf_len) {
782 out->pos = 0;
783 if (empty_buf_len)
784 iobuf.raw_data_header_pos = 0;
785 }
786 }
787
788 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
789 /* This can potentially flush all output and enable
790 * multiplexed output, so keep this last in the loop
791 * and be sure to not cache anything that would break
792 * such a change. */
793 forward_filesfrom_data();
794 }
795 }
796 double_break:
797
798 data = iobuf.in.buf + iobuf.in.pos;
799
800 if (flags & PIO_CONSUME_INPUT) {
801 iobuf.in.len -= needed;
802 iobuf.in.pos += needed;
803 }
804
805 return data;
806}
807
808void noop_io_until_death(void)
809{
810 char buf[1024];
811
812 kluge_around_eof = 1;
813 set_io_timeout(protocol_version >= 31 ? 10 : 1);
814
815 while (1)
816 read_buf(iobuf.in_fd, buf, sizeof buf);
817}
818
819/* Buffer a message for the multiplexed output stream. Is never used for MSG_DATA. */
820int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
821{
822 char *hdr;
823 size_t pos;
824 BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
825
826 if (!OUT_MULTIPLEXED)
827 return 0;
828
829 if (want_debug)
830 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
831
832#ifdef ICONV_OPTION
833 if (convert > 0 && ic_send == (iconv_t)-1)
834 convert = 0;
835 if (convert > 0) {
836 /* Ensuring double-size room leaves space for a potential conversion. */
837 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
838 perform_io(len*2 + 4, PIO_NEED_MSGROOM);
839 } else
840#endif
841 if (iobuf.msg.len + len + 4 > iobuf.msg.size)
842 perform_io(len + 4, PIO_NEED_MSGROOM);
843
844 pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
845 if (pos >= iobuf.msg.size)
846 pos -= iobuf.msg.size;
847 hdr = iobuf.msg.buf + pos;
848
849 iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
850
851#ifdef ICONV_OPTION
852 if (convert > 0) {
853 xbuf inbuf;
854
855 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
856
857 len = iobuf.msg.len;
858 iconvbufs(ic_send, &inbuf, &iobuf.msg,
859 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
860 if (inbuf.len > 0) {
861 rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
862 exit_cleanup(RERR_UNSUPPORTED);
863 }
864 len = iobuf.msg.len - len;
865 } else
866#endif
867 {
868 size_t siz;
869
870 if ((pos += 4) >= iobuf.msg.size)
871 pos -= iobuf.msg.size;
872
873 /* Handle a split copy if we wrap around the end of the circular buffer. */
874 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
875 memcpy(iobuf.msg.buf + pos, buf, siz);
876 memcpy(iobuf.msg.buf, buf + siz, len - siz);
877 } else
878 memcpy(iobuf.msg.buf + pos, buf, len);
879
880 iobuf.msg.len += len;
881 }
882
883 SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
884 /* If the header used any overflow bytes, move them to the start. */
885 if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
886 size_t siz = pos - iobuf.msg.size;
887 if (DEBUG_GTE(IO, 4))
888 rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
889 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
890 }
891
892 if (want_debug && convert > 0)
893 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
894
895 return 1;
896}
897
898void send_msg_int(enum msgcode code, int num)
899{
900 char numbuf[4];
901
902 if (DEBUG_GTE(IO, 1))
903 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
904
905 SIVAL(numbuf, 0, num);
906 send_msg(code, numbuf, 4, -1);
907}
908
909static void got_flist_entry_status(enum festatus status, int ndx)
910{
911 struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
912
913 if (remove_source_files) {
914 active_filecnt--;
915 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
916 }
917
918 if (inc_recurse)
919 flist->in_progress--;
920
921 switch (status) {
922 case FES_SUCCESS:
923 if (remove_source_files)
924 send_msg_int(MSG_SUCCESS, ndx);
925 if (preserve_hard_links) {
926 struct file_struct *file = flist->files[ndx - flist->ndx_start];
927 if (F_IS_HLINKED(file)) {
928 flist_ndx_push(&hlink_list, ndx);
929 flist->in_progress++;
930 }
931 }
932 break;
933 case FES_REDO:
934 if (read_batch) {
935 if (inc_recurse)
936 flist->in_progress++;
937 break;
938 }
939 if (inc_recurse)
940 flist->to_redo++;
941 flist_ndx_push(&redo_list, ndx);
942 break;
943 case FES_NO_SEND:
944 break;
945 }
946}
947
948/* Note the fds used for the main socket (which might really be a pipe
949 * for a local transfer, but we can ignore that). */
950void io_set_sock_fds(int f_in, int f_out)
951{
952 sock_f_in = f_in;
953 sock_f_out = f_out;
954}
955
956void set_io_timeout(int secs)
957{
958 io_timeout = secs;
959
960 if (!io_timeout || io_timeout > SELECT_TIMEOUT)
961 select_timeout = SELECT_TIMEOUT;
962 else
963 select_timeout = io_timeout;
964
965 allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
966}
967
968static void check_for_d_option_error(const char *msg)
969{
970 static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
971 char *colon;
972 int saw_d = 0;
973
974 if (*msg != 'r'
975 || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
976 return;
977
978 msg += sizeof REMOTE_OPTION_ERROR - 1;
979 if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
980 || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
981 return;
982
983 for ( ; *msg != ':'; msg++) {
984 if (*msg == 'd')
985 saw_d = 1;
986 else if (*msg == 'e')
987 break;
988 else if (strchr(rsync263_opts, *msg) == NULL)
989 return;
990 }
991
992 if (saw_d) {
993 rprintf(FWARNING,
994 "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
995 }
996}
997
998/* This is used by the generator to limit how many file transfers can
999 * be active at once when --remove-source-files is specified. Without
1000 * this, sender-side deletions were mostly happening at the end. */
1001void increment_active_files(int ndx, int itemizing, enum logcode code)
1002{
1003 while (1) {
1004 /* TODO: tune these limits? */
1005 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1006 if (active_filecnt < limit)
1007 break;
1008 check_for_finished_files(itemizing, code, 0);
1009 if (active_filecnt < limit)
1010 break;
1011 wait_for_receiver();
1012 }
1013
1014 active_filecnt++;
1015 active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1016}
1017
1018int get_redo_num(void)
1019{
1020 return flist_ndx_pop(&redo_list);
1021}
1022
1023int get_hlink_num(void)
1024{
1025 return flist_ndx_pop(&hlink_list);
1026}
1027
1028/* When we're the receiver and we have a local --files-from list of names
1029 * that needs to be sent over the socket to the sender, we have to do two
1030 * things at the same time: send the sender a list of what files we're
1031 * processing and read the incoming file+info list from the sender. We do
1032 * this by making recv_file_list() call forward_filesfrom_data(), which
1033 * will ensure that we forward data to the sender until we get some data
1034 * for recv_file_list() to use. */
1035void start_filesfrom_forwarding(int fd)
1036{
1037 if (protocol_version < 31 && OUT_MULTIPLEXED) {
1038 /* Older protocols send the files-from data w/o packaging
1039 * it in multiplexed I/O packets, so temporarily switch
1040 * to buffered I/O to match this behavior. */
1041 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1042 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1043 }
1044 ff_forward_fd = fd;
1045
1046 alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1047}
1048
1049/* Read a line into the "buf" buffer. */
1050int read_line(int fd, char *buf, size_t bufsiz, int flags)
1051{
1052 char ch, *s, *eob;
1053
1054#ifdef ICONV_OPTION
1055 if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1056 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1057#endif
1058
1059 start:
1060#ifdef ICONV_OPTION
1061 s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1062#else
1063 s = buf;
1064#endif
1065 eob = s + bufsiz - 1;
1066 while (1) {
1067 /* We avoid read_byte() for files because files can return an EOF. */
1068 if (fd == iobuf.in_fd)
1069 ch = read_byte(fd);
1070 else if (safe_read(fd, &ch, 1) == 0)
1071 break;
1072 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1073 /* Skip empty lines if dumping comments. */
1074 if (flags & RL_DUMP_COMMENTS && s == buf)
1075 continue;
1076 break;
1077 }
1078 if (s < eob)
1079 *s++ = ch;
1080 }
1081 *s = '\0';
1082
1083 if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1084 goto start;
1085
1086#ifdef ICONV_OPTION
1087 if (flags & RL_CONVERT) {
1088 xbuf outbuf;
1089 INIT_XBUF(outbuf, buf, 0, bufsiz);
1090 iconv_buf.pos = 0;
1091 iconv_buf.len = s - iconv_buf.buf;
1092 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1093 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1094 outbuf.buf[outbuf.len] = '\0';
1095 return outbuf.len;
1096 }
1097#endif
1098
1099 return s - buf;
1100}
1101
1102void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1103 char ***argv_p, int *argc_p, char **request_p)
1104{
1105 int maxargs = MAX_ARGS;
1106 int dot_pos = 0;
1107 int argc = 0;
1108 char **argv, *p;
1109 int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1110
1111#ifdef ICONV_OPTION
1112 rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1113#endif
1114
1115 if (!(argv = new_array(char *, maxargs)))
1116 out_of_memory("read_args");
1117 if (mod_name && !protect_args)
1118 argv[argc++] = "rsyncd";
1119
1120 while (1) {
1121 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1122 break;
1123
1124 if (argc == maxargs-1) {
1125 maxargs += MAX_ARGS;
1126 if (!(argv = realloc_array(argv, char *, maxargs)))
1127 out_of_memory("read_args");
1128 }
1129
1130 if (dot_pos) {
1131 if (request_p) {
1132 *request_p = strdup(buf);
1133 request_p = NULL;
1134 }
1135 if (mod_name)
1136 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1137 else
1138 glob_expand(buf, &argv, &argc, &maxargs);
1139 } else {
1140 if (!(p = strdup(buf)))
1141 out_of_memory("read_args");
1142 argv[argc++] = p;
1143 if (*p == '.' && p[1] == '\0')
1144 dot_pos = argc;
1145 }
1146 }
1147 argv[argc] = NULL;
1148
1149 glob_expand(NULL, NULL, NULL, NULL);
1150
1151 *argc_p = argc;
1152 *argv_p = argv;
1153}
1154
1155BOOL io_start_buffering_out(int f_out)
1156{
1157 if (msgs2stderr && DEBUG_GTE(IO, 2))
1158 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1159
1160 if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1161 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1162 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1163 out_of_memory("io_start_buffering_out");
1164 iobuf.msg.pos = iobuf.msg.len = 0;
1165 }
1166
1167 if (iobuf.out.buf) {
1168 if (iobuf.out_fd == -1)
1169 iobuf.out_fd = f_out;
1170 assert(f_out == iobuf.out_fd);
1171 return False;
1172 }
1173
1174 iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1175 /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1176 if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1177 out_of_memory("io_start_buffering_out");
1178 iobuf.out.pos = iobuf.out.len = 0;
1179 iobuf.out_fd = f_out;
1180
1181 return True;
1182}
1183
1184BOOL io_start_buffering_in(int f_in)
1185{
1186 if (msgs2stderr && DEBUG_GTE(IO, 2))
1187 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1188
1189 if (iobuf.in.buf) {
1190 if (iobuf.in_fd == -1)
1191 iobuf.in_fd = f_in;
1192 assert(f_in == iobuf.in_fd);
1193 return False;
1194 }
1195
1196 iobuf.in.size = IO_BUFFER_SIZE;
1197 if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1198 out_of_memory("io_start_buffering_in");
1199
1200 iobuf.in.pos = iobuf.in.len = 0;
1201
1202 iobuf.in_fd = f_in;
1203
1204 return True;
1205}
1206
1207void io_end_buffering_in(BOOL free_buffers)
1208{
1209 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1210 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1211 who_am_i(), free_buffers ? "FREE" : "KEEP");
1212 }
1213
1214 if (free_buffers)
1215 free_xbuf(&iobuf.in);
1216 else
1217 iobuf.in.pos = iobuf.in.len = 0;
1218
1219 iobuf.in_fd = -1;
1220}
1221
1222void io_end_buffering_out(BOOL free_buffers)
1223{
1224 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1225 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1226 who_am_i(), free_buffers ? "FREE" : "KEEP");
1227 }
1228
1229 io_flush(FULL_FLUSH);
1230
1231 if (free_buffers) {
1232 free_xbuf(&iobuf.out);
1233 free_xbuf(&iobuf.msg);
1234 }
1235
1236 iobuf.out_fd = -1;
1237}
1238
1239void maybe_flush_socket(int important)
1240{
1241 if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1242 && (important || time(NULL) - last_io_out >= 5))
1243 io_flush(NORMAL_FLUSH);
1244}
1245
1246void maybe_send_keepalive(void)
1247{
1248 if (time(NULL) - last_io_out >= allowed_lull) {
1249 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1250 if (protocol_version < 29)
1251 return; /* there's nothing we can do */
1252 if (protocol_version >= 30)
1253 send_msg(MSG_NOOP, "", 0, 0);
1254 else {
1255 write_int(iobuf.out_fd, cur_flist->used);
1256 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1257 }
1258 }
1259 if (iobuf.msg.len)
1260 perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1261 else if (iobuf.out.len > iobuf.out_empty_len)
1262 io_flush(NORMAL_FLUSH);
1263 }
1264}
1265
1266void start_flist_forward(int ndx)
1267{
1268 write_int(iobuf.out_fd, ndx);
1269 forward_flist_data = 1;
1270}
1271
1272void stop_flist_forward(void)
1273{
1274 forward_flist_data = 0;
1275}
1276
1277/* Read a message from a multiplexed source. */
1278static void read_a_msg(void)
1279{
1280 char *data, line[BIGPATHBUFLEN];
1281 int tag, val;
1282 size_t msg_bytes;
1283
1284 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1285 tag = IVAL(data, 0);
1286
1287 msg_bytes = tag & 0xFFFFFF;
1288 tag = (tag >> 24) - MPLEX_BASE;
1289
1290 if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1291 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1292
1293 switch (tag) {
1294 case MSG_DATA:
1295 assert(iobuf.raw_input_ends_before == 0);
1296 /* Though this does not yet read the data, we do mark where in
1297 * the buffer the msg data will end once it is read. It is
1298 * possible that this points off the end of the buffer, in
1299 * which case the gradual reading of the input stream will
1300 * cause this value to decrease and eventually become real. */
1301 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1302 break;
1303 case MSG_STATS:
1304 if (msg_bytes != sizeof stats.total_read || !am_generator)
1305 goto invalid_msg;
1306 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1307 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1308 break;
1309 case MSG_REDO:
1310 if (msg_bytes != 4 || !am_generator)
1311 goto invalid_msg;
1312 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1313 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1314 break;
1315 case MSG_IO_ERROR:
1316 if (msg_bytes != 4 || am_sender)
1317 goto invalid_msg;
1318 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1319 io_error |= IVAL(data, 0);
1320 if (!am_generator)
1321 send_msg(MSG_IO_ERROR, data, 4, 0);
1322 break;
1323 case MSG_IO_TIMEOUT:
1324 if (msg_bytes != 4 || am_server || am_generator)
1325 goto invalid_msg;
1326 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1327 val = IVAL(data, 0);
1328 if (!io_timeout || io_timeout > val) {
1329 if (INFO_GTE(MISC, 2))
1330 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1331 set_io_timeout(val);
1332 }
1333 break;
1334 case MSG_NOOP:
1335 if (am_sender)
1336 maybe_send_keepalive();
1337 break;
1338 case MSG_DELETED:
1339 if (msg_bytes >= sizeof line)
1340 goto overflow;
1341 if (am_generator) {
1342 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1343 send_msg(MSG_DELETED, line, msg_bytes, 1);
1344 break;
1345 }
1346#ifdef ICONV_OPTION
1347 if (ic_recv != (iconv_t)-1) {
1348 xbuf outbuf, inbuf;
1349 char ibuf[512];
1350 int add_null = 0;
1351 int flags = ICB_INCLUDE_BAD | ICB_INIT;
1352
1353 INIT_CONST_XBUF(outbuf, line);
1354 INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1355
1356 while (msg_bytes) {
1357 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1358 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1359 inbuf.pos = 0;
1360 inbuf.len += len;
1361 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1362 inbuf.len--, add_null = 1;
1363 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1364 if (errno == E2BIG)
1365 goto overflow;
1366 /* Buffer ended with an incomplete char, so move the
1367 * bytes to the start of the buffer and continue. */
1368 memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1369 }
1370 flags &= ~ICB_INIT;
1371 }
1372 if (add_null) {
1373 if (outbuf.len == outbuf.size)
1374 goto overflow;
1375 outbuf.buf[outbuf.len++] = '\0';
1376 }
1377 msg_bytes = outbuf.len;
1378 } else
1379#endif
1380 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1381 /* A directory name was sent with the trailing null */
1382 if (msg_bytes > 0 && !line[msg_bytes-1])
1383 log_delete(line, S_IFDIR);
1384 else {
1385 line[msg_bytes] = '\0';
1386 log_delete(line, S_IFREG);
1387 }
1388 break;
1389 case MSG_SUCCESS:
1390 if (msg_bytes != 4) {
1391 invalid_msg:
1392 rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1393 tag, (unsigned long)msg_bytes, who_am_i(),
1394 inc_recurse ? "/inc" : "");
1395 exit_cleanup(RERR_STREAMIO);
1396 }
1397 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1398 if (am_generator)
1399 got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1400 else
1401 successful_send(IVAL(data, 0));
1402 break;
1403 case MSG_NO_SEND:
1404 if (msg_bytes != 4)
1405 goto invalid_msg;
1406 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1407 if (am_generator)
1408 got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1409 else
1410 send_msg(MSG_NO_SEND, data, 4, 0);
1411 break;
1412 case MSG_ERROR_SOCKET:
1413 case MSG_ERROR_UTF8:
1414 case MSG_CLIENT:
1415 case MSG_LOG:
1416 if (!am_generator)
1417 goto invalid_msg;
1418 if (tag == MSG_ERROR_SOCKET)
1419 msgs2stderr = 1;
1420 /* FALL THROUGH */
1421 case MSG_INFO:
1422 case MSG_ERROR:
1423 case MSG_ERROR_XFER:
1424 case MSG_WARNING:
1425 if (msg_bytes >= sizeof line) {
1426 overflow:
1427 rprintf(FERROR,
1428 "multiplexing overflow %d:%lu [%s%s]\n",
1429 tag, (unsigned long)msg_bytes, who_am_i(),
1430 inc_recurse ? "/inc" : "");
1431 exit_cleanup(RERR_STREAMIO);
1432 }
1433 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1434 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1435 if (first_message) {
1436 if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1437 line[msg_bytes] = '\0';
1438 check_for_d_option_error(line);
1439 }
1440 first_message = 0;
1441 }
1442 break;
1443 case MSG_ERROR_EXIT:
1444 if (msg_bytes == 0) {
1445 if (!am_sender && !am_generator) {
1446 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1447 io_flush(FULL_FLUSH);
1448 }
1449 val = 0;
1450 } else if (msg_bytes == 4) {
1451 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1452 val = IVAL(data, 0);
1453 if (protocol_version >= 31) {
1454 if (am_generator)
1455 send_msg_int(MSG_ERROR_EXIT, val);
1456 else
1457 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1458 }
1459 } else
1460 goto invalid_msg;
1461 /* Send a negative linenum so that we don't end up
1462 * with a duplicate exit message. */
1463 _exit_cleanup(val, __FILE__, 0 - __LINE__);
1464 default:
1465 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1466 tag, who_am_i(), inc_recurse ? "/inc" : "");
1467 exit_cleanup(RERR_STREAMIO);
1468 }
1469}
1470
1471void wait_for_receiver(void)
1472{
1473 if (!iobuf.raw_input_ends_before)
1474 read_a_msg();
1475
1476 if (iobuf.raw_input_ends_before) {
1477 int ndx = read_int(iobuf.in_fd);
1478 if (ndx < 0) {
1479 switch (ndx) {
1480 case NDX_FLIST_EOF:
1481 flist_eof = 1;
1482 if (DEBUG_GTE(FLIST, 3))
1483 rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1484 break;
1485 case NDX_DONE:
1486 msgdone_cnt++;
1487 break;
1488 default:
1489 exit_cleanup(RERR_STREAMIO);
1490 }
1491 } else {
1492 struct file_list *flist;
1493 if (DEBUG_GTE(FLIST, 2)) {
1494 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1495 who_am_i(), ndx);
1496 }
1497 flist = recv_file_list(iobuf.in_fd);
1498 flist->parent_ndx = ndx;
1499#ifdef SUPPORT_HARD_LINKS
1500 if (preserve_hard_links)
1501 match_hard_links(flist);
1502#endif
1503 }
1504 }
1505}
1506
1507unsigned short read_shortint(int f)
1508{
1509 char b[2];
1510 read_buf(f, b, 2);
1511 return (UVAL(b, 1) << 8) + UVAL(b, 0);
1512}
1513
1514int32 read_int(int f)
1515{
1516 char b[4];
1517 int32 num;
1518
1519 read_buf(f, b, 4);
1520 num = IVAL(b, 0);
1521#if SIZEOF_INT32 > 4
1522 if (num & (int32)0x80000000)
1523 num |= ~(int32)0xffffffff;
1524#endif
1525 return num;
1526}
1527
1528int32 read_varint(int f)
1529{
1530 union {
1531 char b[5];
1532 int32 x;
1533 } u;
1534 uchar ch;
1535 int extra;
1536
1537 u.x = 0;
1538 ch = read_byte(f);
1539 extra = int_byte_extra[ch / 4];
1540 if (extra) {
1541 uchar bit = ((uchar)1<<(8-extra));
1542 if (extra >= (int)sizeof u.b) {
1543 rprintf(FERROR, "Overflow in read_varint()\n");
1544 exit_cleanup(RERR_STREAMIO);
1545 }
1546 read_buf(f, u.b, extra);
1547 u.b[extra] = ch & (bit-1);
1548 } else
1549 u.b[0] = ch;
1550#if CAREFUL_ALIGNMENT
1551 u.x = IVAL(u.b,0);
1552#endif
1553#if SIZEOF_INT32 > 4
1554 if (u.x & (int32)0x80000000)
1555 u.x |= ~(int32)0xffffffff;
1556#endif
1557 return u.x;
1558}
1559
1560int64 read_varlong(int f, uchar min_bytes)
1561{
1562 union {
1563 char b[9];
1564 int64 x;
1565 } u;
1566 char b2[8];
1567 int extra;
1568
1569#if SIZEOF_INT64 < 8
1570 memset(u.b, 0, 8);
1571#else
1572 u.x = 0;
1573#endif
1574 read_buf(f, b2, min_bytes);
1575 memcpy(u.b, b2+1, min_bytes-1);
1576 extra = int_byte_extra[CVAL(b2, 0) / 4];
1577 if (extra) {
1578 uchar bit = ((uchar)1<<(8-extra));
1579 if (min_bytes + extra > (int)sizeof u.b) {
1580 rprintf(FERROR, "Overflow in read_varlong()\n");
1581 exit_cleanup(RERR_STREAMIO);
1582 }
1583 read_buf(f, u.b + min_bytes - 1, extra);
1584 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1585#if SIZEOF_INT64 < 8
1586 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1587 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1588 exit_cleanup(RERR_UNSUPPORTED);
1589 }
1590#endif
1591 } else
1592 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1593#if SIZEOF_INT64 < 8
1594 u.x = IVAL(u.b,0);
1595#elif CAREFUL_ALIGNMENT
1596 u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1597#endif
1598 return u.x;
1599}
1600
1601int64 read_longint(int f)
1602{
1603#if SIZEOF_INT64 >= 8
1604 char b[9];
1605#endif
1606 int32 num = read_int(f);
1607
1608 if (num != (int32)0xffffffff)
1609 return num;
1610
1611#if SIZEOF_INT64 < 8
1612 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1613 exit_cleanup(RERR_UNSUPPORTED);
1614#else
1615 read_buf(f, b, 8);
1616 return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1617#endif
1618}
1619
1620void read_buf(int f, char *buf, size_t len)
1621{
1622 if (f != iobuf.in_fd) {
1623 if (safe_read(f, buf, len) != len)
1624 whine_about_eof(f); /* Doesn't return. */
1625 goto batch_copy;
1626 }
1627
1628 if (!IN_MULTIPLEXED) {
1629 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1630 total_data_read += len;
1631 if (forward_flist_data)
1632 write_buf(iobuf.out_fd, buf, len);
1633 batch_copy:
1634 if (f == write_batch_monitor_in)
1635 safe_write(batch_fd, buf, len);
1636 return;
1637 }
1638
1639 while (1) {
1640 char *data;
1641 size_t siz;
1642
1643 while (!iobuf.raw_input_ends_before)
1644 read_a_msg();
1645
1646 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1647 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1648 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1649 iobuf.raw_input_ends_before = 0;
1650
1651 /* The bytes at the "data" pointer will survive long
1652 * enough to make a copy, but not past future I/O. */
1653 memcpy(buf, data, siz);
1654 total_data_read += siz;
1655
1656 if (forward_flist_data)
1657 write_buf(iobuf.out_fd, buf, siz);
1658
1659 if (f == write_batch_monitor_in)
1660 safe_write(batch_fd, buf, siz);
1661
1662 if ((len -= siz) == 0)
1663 break;
1664 buf += siz;
1665 }
1666}
1667
1668void read_sbuf(int f, char *buf, size_t len)
1669{
1670 read_buf(f, buf, len);
1671 buf[len] = '\0';
1672}
1673
1674uchar read_byte(int f)
1675{
1676 uchar c;
1677 read_buf(f, (char*)&c, 1);
1678 return c;
1679}
1680
1681int read_vstring(int f, char *buf, int bufsize)
1682{
1683 int len = read_byte(f);
1684
1685 if (len & 0x80)
1686 len = (len & ~0x80) * 0x100 + read_byte(f);
1687
1688 if (len >= bufsize) {
1689 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1690 len, bufsize - 1);
1691 return -1;
1692 }
1693
1694 if (len)
1695 read_buf(f, buf, len);
1696 buf[len] = '\0';
1697 return len;
1698}
1699
1700/* Populate a sum_struct with values from the socket. This is
1701 * called by both the sender and the receiver. */
1702void read_sum_head(int f, struct sum_struct *sum)
1703{
1704 int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1705 sum->count = read_int(f);
1706 if (sum->count < 0) {
1707 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1708 (long)sum->count, who_am_i());
1709 exit_cleanup(RERR_PROTOCOL);
1710 }
1711 sum->blength = read_int(f);
1712 if (sum->blength < 0 || sum->blength > max_blength) {
1713 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1714 (long)sum->blength, who_am_i());
1715 exit_cleanup(RERR_PROTOCOL);
1716 }
1717 sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1718 if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1719 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1720 sum->s2length, who_am_i());
1721 exit_cleanup(RERR_PROTOCOL);
1722 }
1723 sum->remainder = read_int(f);
1724 if (sum->remainder < 0 || sum->remainder > sum->blength) {
1725 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1726 (long)sum->remainder, who_am_i());
1727 exit_cleanup(RERR_PROTOCOL);
1728 }
1729}
1730
1731/* Send the values from a sum_struct over the socket. Set sum to
1732 * NULL if there are no checksums to send. This is called by both
1733 * the generator and the sender. */
1734void write_sum_head(int f, struct sum_struct *sum)
1735{
1736 static struct sum_struct null_sum;
1737
1738 if (sum == NULL)
1739 sum = &null_sum;
1740
1741 write_int(f, sum->count);
1742 write_int(f, sum->blength);
1743 if (protocol_version >= 27)
1744 write_int(f, sum->s2length);
1745 write_int(f, sum->remainder);
1746}
1747
1748/* Sleep after writing to limit I/O bandwidth usage.
1749 *
1750 * @todo Rather than sleeping after each write, it might be better to
1751 * use some kind of averaging. The current algorithm seems to always
1752 * use a bit less bandwidth than specified, because it doesn't make up
1753 * for slow periods. But arguably this is a feature. In addition, we
1754 * ought to take the time used to write the data into account.
1755 *
1756 * During some phases of big transfers (file FOO is uptodate) this is
1757 * called with a small bytes_written every time. As the kernel has to
1758 * round small waits up to guarantee that we actually wait at least the
1759 * requested number of microseconds, this can become grossly inaccurate.
1760 * We therefore keep track of the bytes we've written over time and only
1761 * sleep when the accumulated delay is at least 1 tenth of a second. */
1762static void sleep_for_bwlimit(int bytes_written)
1763{
1764 static struct timeval prior_tv;
1765 static long total_written = 0;
1766 struct timeval tv, start_tv;
1767 long elapsed_usec, sleep_usec;
1768
1769#define ONE_SEC 1000000L /* # of microseconds in a second */
1770
1771 total_written += bytes_written;
1772
1773 gettimeofday(&start_tv, NULL);
1774 if (prior_tv.tv_sec) {
1775 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1776 + (start_tv.tv_usec - prior_tv.tv_usec);
1777 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1778 if (total_written < 0)
1779 total_written = 0;
1780 }
1781
1782 sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1783 if (sleep_usec < ONE_SEC / 10) {
1784 prior_tv = start_tv;
1785 return;
1786 }
1787
1788 tv.tv_sec = sleep_usec / ONE_SEC;
1789 tv.tv_usec = sleep_usec % ONE_SEC;
1790 select(0, NULL, NULL, NULL, &tv);
1791
1792 gettimeofday(&prior_tv, NULL);
1793 elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1794 + (prior_tv.tv_usec - start_tv.tv_usec);
1795 total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1796}
1797
1798void io_flush(int flush_it_all)
1799{
1800 if (iobuf.out.len > iobuf.out_empty_len) {
1801 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1802 perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1803 else /* NORMAL_FLUSH: flush at least 1 byte */
1804 perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1805 }
1806 if (iobuf.msg.len)
1807 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1808}
1809
1810void write_shortint(int f, unsigned short x)
1811{
1812 char b[2];
1813 b[0] = (char)x;
1814 b[1] = (char)(x >> 8);
1815 write_buf(f, b, 2);
1816}
1817
1818void write_int(int f, int32 x)
1819{
1820 char b[4];
1821 SIVAL(b, 0, x);
1822 write_buf(f, b, 4);
1823}
1824
1825void write_varint(int f, int32 x)
1826{
1827 char b[5];
1828 uchar bit;
1829 int cnt = 4;
1830
1831 SIVAL(b, 1, x);
1832
1833 while (cnt > 1 && b[cnt] == 0)
1834 cnt--;
1835 bit = ((uchar)1<<(7-cnt+1));
1836 if (CVAL(b, cnt) >= bit) {
1837 cnt++;
1838 *b = ~(bit-1);
1839 } else if (cnt > 1)
1840 *b = b[cnt] | ~(bit*2-1);
1841 else
1842 *b = b[cnt];
1843
1844 write_buf(f, b, cnt);
1845}
1846
1847void write_varlong(int f, int64 x, uchar min_bytes)
1848{
1849 char b[9];
1850 uchar bit;
1851 int cnt = 8;
1852
1853 SIVAL(b, 1, x);
1854#if SIZEOF_INT64 >= 8
1855 SIVAL(b, 5, x >> 32);
1856#else
1857 if (x <= 0x7FFFFFFF && x >= 0)
1858 memset(b + 5, 0, 4);
1859 else {
1860 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1861 exit_cleanup(RERR_UNSUPPORTED);
1862 }
1863#endif
1864
1865 while (cnt > min_bytes && b[cnt] == 0)
1866 cnt--;
1867 bit = ((uchar)1<<(7-cnt+min_bytes));
1868 if (CVAL(b, cnt) >= bit) {
1869 cnt++;
1870 *b = ~(bit-1);
1871 } else if (cnt > min_bytes)
1872 *b = b[cnt] | ~(bit*2-1);
1873 else
1874 *b = b[cnt];
1875
1876 write_buf(f, b, cnt);
1877}
1878
1879/*
1880 * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1881 * 64-bit types on this platform.
1882 */
1883void write_longint(int f, int64 x)
1884{
1885 char b[12], * const s = b+4;
1886
1887 SIVAL(s, 0, x);
1888 if (x <= 0x7FFFFFFF && x >= 0) {
1889 write_buf(f, s, 4);
1890 return;
1891 }
1892
1893#if SIZEOF_INT64 < 8
1894 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1895 exit_cleanup(RERR_UNSUPPORTED);
1896#else
1897 memset(b, 0xFF, 4);
1898 SIVAL(s, 4, x >> 32);
1899 write_buf(f, b, 12);
1900#endif
1901}
1902
1903void write_buf(int f, const char *buf, size_t len)
1904{
1905 size_t pos, siz;
1906
1907 if (f != iobuf.out_fd) {
1908 safe_write(f, buf, len);
1909 goto batch_copy;
1910 }
1911
1912 if (iobuf.out.len + len > iobuf.out.size)
1913 perform_io(len, PIO_NEED_OUTROOM);
1914
1915 pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1916 if (pos >= iobuf.out.size)
1917 pos -= iobuf.out.size;
1918
1919 /* Handle a split copy if we wrap around the end of the circular buffer. */
1920 if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1921 memcpy(iobuf.out.buf + pos, buf, siz);
1922 memcpy(iobuf.out.buf, buf + siz, len - siz);
1923 } else
1924 memcpy(iobuf.out.buf + pos, buf, len);
1925
1926 iobuf.out.len += len;
1927 total_data_written += len;
1928
1929 batch_copy:
1930 if (f == write_batch_monitor_out)
1931 safe_write(batch_fd, buf, len);
1932}
1933
1934/* Write a string to the connection */
1935void write_sbuf(int f, const char *buf)
1936{
1937 write_buf(f, buf, strlen(buf));
1938}
1939
1940void write_byte(int f, uchar c)
1941{
1942 write_buf(f, (char *)&c, 1);
1943}
1944
1945void write_vstring(int f, const char *str, int len)
1946{
1947 uchar lenbuf[3], *lb = lenbuf;
1948
1949 if (len > 0x7F) {
1950 if (len > 0x7FFF) {
1951 rprintf(FERROR,
1952 "attempting to send over-long vstring (%d > %d)\n",
1953 len, 0x7FFF);
1954 exit_cleanup(RERR_PROTOCOL);
1955 }
1956 *lb++ = len / 0x100 + 0x80;
1957 }
1958 *lb = len;
1959
1960 write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1961 if (len)
1962 write_buf(f, str, len);
1963}
1964
1965/* Send a file-list index using a byte-reduction method. */
1966void write_ndx(int f, int32 ndx)
1967{
1968 static int32 prev_positive = -1, prev_negative = 1;
1969 int32 diff, cnt = 0;
1970 char b[6];
1971
1972 if (protocol_version < 30 || read_batch) {
1973 write_int(f, ndx);
1974 return;
1975 }
1976
1977 /* Send NDX_DONE as a single-byte 0 with no side effects. Send
1978 * negative nums as a positive after sending a leading 0xFF. */
1979 if (ndx >= 0) {
1980 diff = ndx - prev_positive;
1981 prev_positive = ndx;
1982 } else if (ndx == NDX_DONE) {
1983 *b = 0;
1984 write_buf(f, b, 1);
1985 return;
1986 } else {
1987 b[cnt++] = (char)0xFF;
1988 ndx = -ndx;
1989 diff = ndx - prev_negative;
1990 prev_negative = ndx;
1991 }
1992
1993 /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1994 * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1995 * & all 4 bytes of the (non-negative) num with the high-bit set. */
1996 if (diff < 0xFE && diff > 0)
1997 b[cnt++] = (char)diff;
1998 else if (diff < 0 || diff > 0x7FFF) {
1999 b[cnt++] = (char)0xFE;
2000 b[cnt++] = (char)((ndx >> 24) | 0x80);
2001 b[cnt++] = (char)ndx;
2002 b[cnt++] = (char)(ndx >> 8);
2003 b[cnt++] = (char)(ndx >> 16);
2004 } else {
2005 b[cnt++] = (char)0xFE;
2006 b[cnt++] = (char)(diff >> 8);
2007 b[cnt++] = (char)diff;
2008 }
2009 write_buf(f, b, cnt);
2010}
2011
2012/* Receive a file-list index using a byte-reduction method. */
2013int32 read_ndx(int f)
2014{
2015 static int32 prev_positive = -1, prev_negative = 1;
2016 int32 *prev_ptr, num;
2017 char b[4];
2018
2019 if (protocol_version < 30)
2020 return read_int(f);
2021
2022 read_buf(f, b, 1);
2023 if (CVAL(b, 0) == 0xFF) {
2024 read_buf(f, b, 1);
2025 prev_ptr = &prev_negative;
2026 } else if (CVAL(b, 0) == 0)
2027 return NDX_DONE;
2028 else
2029 prev_ptr = &prev_positive;
2030 if (CVAL(b, 0) == 0xFE) {
2031 read_buf(f, b, 2);
2032 if (CVAL(b, 0) & 0x80) {
2033 b[3] = CVAL(b, 0) & ~0x80;
2034 b[0] = b[1];
2035 read_buf(f, b+1, 2);
2036 num = IVAL(b, 0);
2037 } else
2038 num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2039 } else
2040 num = UVAL(b, 0) + *prev_ptr;
2041 *prev_ptr = num;
2042 if (prev_ptr == &prev_negative)
2043 num = -num;
2044 return num;
2045}
2046
2047/* Read a line of up to bufsiz-1 characters into buf. Strips
2048 * the (required) trailing newline and all carriage returns.
2049 * Returns 1 for success; 0 for I/O error or truncation. */
2050int read_line_old(int fd, char *buf, size_t bufsiz)
2051{
2052 bufsiz--; /* leave room for the null */
2053 while (bufsiz > 0) {
2054 assert(fd != iobuf.in_fd);
2055 if (safe_read(fd, buf, 1) == 0)
2056 return 0;
2057 if (*buf == '\0')
2058 return 0;
2059 if (*buf == '\n')
2060 break;
2061 if (*buf != '\r') {
2062 buf++;
2063 bufsiz--;
2064 }
2065 }
2066 *buf = '\0';
2067 return bufsiz > 0;
2068}
2069
2070void io_printf(int fd, const char *format, ...)
2071{
2072 va_list ap;
2073 char buf[BIGPATHBUFLEN];
2074 int len;
2075
2076 va_start(ap, format);
2077 len = vsnprintf(buf, sizeof buf, format, ap);
2078 va_end(ap);
2079
2080 if (len < 0)
2081 exit_cleanup(RERR_STREAMIO);
2082
2083 if (len > (int)sizeof buf) {
2084 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2085 exit_cleanup(RERR_STREAMIO);
2086 }
2087
2088 write_sbuf(fd, buf);
2089}
2090
2091/* Setup for multiplexing a MSG_* stream with the data stream. */
2092void io_start_multiplex_out(int fd)
2093{
2094 io_flush(FULL_FLUSH);
2095
2096 if (msgs2stderr && DEBUG_GTE(IO, 2))
2097 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2098
2099 iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2100 io_start_buffering_out(fd);
2101
2102 iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2103 iobuf.out.len += 4;
2104}
2105
2106/* Setup for multiplexing a MSG_* stream with the data stream. */
2107void io_start_multiplex_in(int fd)
2108{
2109 if (msgs2stderr && DEBUG_GTE(IO, 2))
2110 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2111
2112 iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2113 io_start_buffering_in(fd);
2114}
2115
2116int io_end_multiplex_in(int mode)
2117{
2118 int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2119
2120 if (msgs2stderr && DEBUG_GTE(IO, 2))
2121 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2122
2123 iobuf.in_multiplexed = False;
2124 if (mode == MPLX_SWITCHING)
2125 iobuf.raw_input_ends_before = 0;
2126 else
2127 assert(iobuf.raw_input_ends_before == 0);
2128 if (mode != MPLX_TO_BUFFERED)
2129 io_end_buffering_in(mode);
2130
2131 return ret;
2132}
2133
2134int io_end_multiplex_out(int mode)
2135{
2136 int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2137
2138 if (msgs2stderr && DEBUG_GTE(IO, 2))
2139 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2140
2141 if (mode != MPLX_TO_BUFFERED)
2142 io_end_buffering_out(mode);
2143 else
2144 io_flush(FULL_FLUSH);
2145
2146 iobuf.out.len = 0;
2147 iobuf.out_empty_len = 0;
2148
2149 return ret;
2150}
2151
2152void start_write_batch(int fd)
2153{
2154 /* Some communication has already taken place, but we don't
2155 * enable batch writing until here so that we can write a
2156 * canonical record of the communication even though the
2157 * actual communication so far depends on whether a daemon
2158 * is involved. */
2159 write_int(batch_fd, protocol_version);
2160 if (protocol_version >= 30)
2161 write_byte(batch_fd, inc_recurse);
2162 write_int(batch_fd, checksum_seed);
2163
2164 if (am_sender)
2165 write_batch_monitor_out = fd;
2166 else
2167 write_batch_monitor_in = fd;
2168}
2169
2170void stop_write_batch(void)
2171{
2172 write_batch_monitor_out = -1;
2173 write_batch_monitor_in = -1;
2174}