Fixed the buffer-has-space check in write_buf().
[rsync/rsync.git] / io.c
... / ...
CommitLineData
1/*
2 * Socket and pipe I/O utilities used in rsync.
3 *
4 * Copyright (C) 1996-2001 Andrew Tridgell
5 * Copyright (C) 1996 Paul Mackerras
6 * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7 * Copyright (C) 2003-2009 Wayne Davison
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 3 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License along
20 * with this program; if not, visit the http://fsf.org website.
21 */
22
23/* Rsync provides its own multiplexing system, which is used to send
24 * stderr and stdout over a single socket.
25 *
26 * For historical reasons this is off during the start of the
27 * connection, but it's switched on quite early using
28 * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30#include "rsync.h"
31#include "ifuncs.h"
32#include "inums.h"
33
34/** If no timeout is specified then use a 60 second select timeout */
35#define SELECT_TIMEOUT 60
36
37extern int bwlimit;
38extern size_t bwlimit_writemax;
39extern int io_timeout;
40extern int am_server;
41extern int am_daemon;
42extern int am_sender;
43extern int am_generator;
44extern int msgs2stderr;
45extern int inc_recurse;
46extern int io_error;
47extern int eol_nulls;
48extern int flist_eof;
49extern int file_total;
50extern int file_old_total;
51extern int list_only;
52extern int read_batch;
53extern int protect_args;
54extern int checksum_seed;
55extern int protocol_version;
56extern int remove_source_files;
57extern int preserve_hard_links;
58extern BOOL extra_flist_sending_enabled;
59extern struct stats stats;
60extern struct file_list *cur_flist;
61#ifdef ICONV_OPTION
62extern int filesfrom_convert;
63extern iconv_t ic_send, ic_recv;
64#endif
65
66int csum_length = SHORT_SUM_LENGTH; /* initial value */
67int allowed_lull = 0;
68int ignore_timeout = 0;
69int batch_fd = -1;
70int msgdone_cnt = 0;
71int forward_flist_data = 0;
72
73/* Ignore an EOF error if non-zero. See whine_about_eof(). */
74int kluge_around_eof = 0;
75
76int sock_f_in = -1;
77int sock_f_out = -1;
78
79int64 total_data_read = 0;
80int64 total_data_written = 0;
81
82static struct {
83 xbuf in, out, msg;
84 int in_fd;
85 int out_fd; /* Both "out" and "msg" go to this fd. */
86 BOOL in_multiplexed;
87 unsigned out_empty_len;
88 size_t raw_data_header_pos; /* in the out xbuf */
89 size_t raw_flushing_ends_before; /* in the out xbuf */
90 size_t raw_input_ends_before; /* in the in xbuf */
91} iobuf = { .in_fd = -1, .out_fd = -1 };
92
93static time_t last_io_in;
94static time_t last_io_out;
95
96static int write_batch_monitor_in = -1;
97static int write_batch_monitor_out = -1;
98
99static int ff_forward_fd = -1;
100static int ff_reenable_multiplex = -1;
101static char ff_lastchar = '\0';
102static xbuf ff_xb = EMPTY_XBUF;
103#ifdef ICONV_OPTION
104static xbuf iconv_buf = EMPTY_XBUF;
105#endif
106static int select_timeout = SELECT_TIMEOUT;
107static int active_filecnt = 0;
108static OFF_T active_bytecnt = 0;
109static int first_message = 1;
110
111static char int_byte_extra[64] = {
112 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
113 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
114 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
115 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
116};
117
118#define IN_MULTIPLEXED (iobuf.in_multiplexed)
119#define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
120
121#define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
122#define PIO_NEED_OUTROOM (1<<1)
123#define PIO_NEED_MSGROOM (1<<2)
124
125#define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
126
127#define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
128#define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
129
130#define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
131#define REMOTE_OPTION_ERROR2 ": unknown option"
132
133#define FILESFROM_BUFLEN 2048
134
135enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
136
137static flist_ndx_list redo_list, hlink_list;
138
139static void sleep_for_bwlimit(int bytes_written);
140
141static void check_timeout(void)
142{
143 time_t t;
144
145 if (!io_timeout || ignore_timeout)
146 return;
147
148 if (!last_io_in) {
149 last_io_in = time(NULL);
150 return;
151 }
152
153 t = time(NULL);
154
155 if (t - last_io_in >= io_timeout) {
156 if (!am_server && !am_daemon) {
157 rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
158 (int)(t-last_io_in));
159 }
160 exit_cleanup(RERR_TIMEOUT);
161 }
162}
163
164/* It's almost always an error to get an EOF when we're trying to read from the
165 * network, because the protocol is (for the most part) self-terminating.
166 *
167 * There is one case for the receiver when it is at the end of the transfer
168 * (hanging around reading any keep-alive packets that might come its way): if
169 * the sender dies before the generator's kill-signal comes through, we can end
170 * up here needing to loop until the kill-signal arrives. In this situation,
171 * kluge_around_eof will be < 0.
172 *
173 * There is another case for older protocol versions (< 24) where the module
174 * listing was not terminated, so we must ignore an EOF error in that case and
175 * exit. In this situation, kluge_around_eof will be > 0. */
176static NORETURN void whine_about_eof(int fd)
177{
178 if (kluge_around_eof && fd == sock_f_in) {
179 int i;
180 if (kluge_around_eof > 0)
181 exit_cleanup(0);
182 /* If we're still here after 10 seconds, exit with an error. */
183 for (i = 10*1000/20; i--; )
184 msleep(20);
185 }
186
187 rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
188 "(%s bytes received so far) [%s]\n",
189 big_num(stats.total_read), who_am_i());
190
191 exit_cleanup(RERR_STREAMIO);
192}
193
194/* Do a safe read, handling any needed looping and error handling.
195 * Returns the count of the bytes read, which will only be different
196 * from "len" if we encountered an EOF. This routine is not used on
197 * the socket except very early in the transfer. */
198static size_t safe_read(int fd, char *buf, size_t len)
199{
200 size_t got;
201 int n;
202
203 assert(fd != iobuf.in_fd);
204
205 n = read(fd, buf, len);
206 if ((size_t)n == len || n == 0) {
207 if (DEBUG_GTE(IO, 2))
208 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
209 return n;
210 }
211 if (n < 0) {
212 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
213 read_failed:
214 rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
215 (long)len, who_am_i());
216 exit_cleanup(RERR_STREAMIO);
217 }
218 got = 0;
219 } else
220 got = n;
221
222 while (1) {
223 struct timeval tv;
224 fd_set r_fds, e_fds;
225 int cnt;
226
227 FD_ZERO(&r_fds);
228 FD_SET(fd, &r_fds);
229 FD_ZERO(&e_fds);
230 FD_SET(fd, &e_fds);
231 tv.tv_sec = select_timeout;
232 tv.tv_usec = 0;
233
234 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
235 if (cnt <= 0) {
236 if (cnt < 0 && errno == EBADF) {
237 rsyserr(FERROR, errno, "safe_read select failed [%s]",
238 who_am_i());
239 exit_cleanup(RERR_FILEIO);
240 }
241 check_timeout();
242 continue;
243 }
244
245 /*if (FD_ISSET(fd, &e_fds))
246 rprintf(FINFO, "select exception on fd %d\n", fd); */
247
248 if (FD_ISSET(fd, &r_fds)) {
249 n = read(fd, buf + got, len - got);
250 if (DEBUG_GTE(IO, 2))
251 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
252 if (n == 0)
253 break;
254 if (n < 0) {
255 if (errno == EINTR)
256 continue;
257 goto read_failed;
258 }
259 if ((got += (size_t)n) == len)
260 break;
261 }
262 }
263
264 return got;
265}
266
267static const char *what_fd_is(int fd)
268{
269 static char buf[20];
270
271 if (fd == sock_f_out)
272 return "socket";
273 else if (fd == iobuf.out_fd)
274 return "message fd";
275 else if (fd == batch_fd)
276 return "batch file";
277 else {
278 snprintf(buf, sizeof buf, "fd %d", fd);
279 return buf;
280 }
281}
282
283/* Do a safe write, handling any needed looping and error handling.
284 * Returns only if everything was successfully written. This routine
285 * is not used on the socket except very early in the transfer. */
286static void safe_write(int fd, const char *buf, size_t len)
287{
288 int n;
289
290 assert(fd != iobuf.out_fd);
291
292 n = write(fd, buf, len);
293 if ((size_t)n == len)
294 return;
295 if (n < 0) {
296 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
297 write_failed:
298 rsyserr(FERROR, errno,
299 "safe_write failed to write %ld bytes to %s [%s]",
300 (long)len, what_fd_is(fd), who_am_i());
301 exit_cleanup(RERR_STREAMIO);
302 }
303 } else {
304 buf += n;
305 len -= n;
306 }
307
308 while (len) {
309 struct timeval tv;
310 fd_set w_fds;
311 int cnt;
312
313 FD_ZERO(&w_fds);
314 FD_SET(fd, &w_fds);
315 tv.tv_sec = select_timeout;
316 tv.tv_usec = 0;
317
318 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
319 if (cnt <= 0) {
320 if (cnt < 0 && errno == EBADF) {
321 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
322 what_fd_is(fd), who_am_i());
323 exit_cleanup(RERR_FILEIO);
324 }
325 check_timeout();
326 continue;
327 }
328
329 if (FD_ISSET(fd, &w_fds)) {
330 n = write(fd, buf, len);
331 if (n < 0) {
332 if (errno == EINTR)
333 continue;
334 goto write_failed;
335 }
336 buf += n;
337 len -= n;
338 }
339 }
340}
341
342/* This is only called when files-from data is known to be available. We read
343 * a chunk of data and put it into the output buffer. */
344static void forward_filesfrom_data(void)
345{
346 int len;
347
348 len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
349 if (len <= 0) {
350 if (len == 0 || errno != EINTR) {
351 /* Send end-of-file marker */
352 ff_forward_fd = -1;
353 write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
354 free_xbuf(&ff_xb);
355 if (ff_reenable_multiplex >= 0)
356 io_start_multiplex_out(ff_reenable_multiplex);
357 }
358 return;
359 }
360
361 if (DEBUG_GTE(IO, 2))
362 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
363
364#ifdef ICONV_OPTION
365 len += ff_xb.len;
366#endif
367
368 if (!eol_nulls) {
369 char *s = ff_xb.buf + len;
370 /* Transform CR and/or LF into '\0' */
371 while (s-- > ff_xb.buf) {
372 if (*s == '\n' || *s == '\r')
373 *s = '\0';
374 }
375 }
376
377 if (ff_lastchar)
378 ff_xb.pos = 0;
379 else {
380 char *s = ff_xb.buf;
381 /* Last buf ended with a '\0', so don't let this buf start with one. */
382 while (len && *s == '\0')
383 s++, len--;
384 ff_xb.pos = s - ff_xb.buf;
385 }
386
387#ifdef ICONV_OPTION
388 if (filesfrom_convert && len) {
389 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
390 char *eob = sob + len;
391 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
392 if (ff_lastchar == '\0')
393 flags |= ICB_INIT;
394 /* Convert/send each null-terminated string separately, skipping empties. */
395 while (s != eob) {
396 if (*s++ == '\0') {
397 ff_xb.len = s - sob - 1;
398 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
399 exit_cleanup(RERR_PROTOCOL); /* impossible? */
400 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
401 while (s != eob && *s == '\0')
402 s++;
403 sob = s;
404 ff_xb.pos = sob - ff_xb.buf;
405 flags |= ICB_INIT;
406 }
407 }
408
409 if ((ff_xb.len = s - sob) == 0)
410 ff_lastchar = '\0';
411 else {
412 /* Handle a partial string specially, saving any incomplete chars. */
413 flags &= ~ICB_INCLUDE_INCOMPLETE;
414 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
415 if (errno == E2BIG)
416 exit_cleanup(RERR_PROTOCOL); /* impossible? */
417 if (ff_xb.pos)
418 memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
419 }
420 ff_lastchar = 'x'; /* Anything non-zero. */
421 }
422 } else
423#endif
424
425 if (len) {
426 char *f = ff_xb.buf + ff_xb.pos;
427 char *t = ff_xb.buf;
428 char *eob = f + len;
429 /* Eliminate any multi-'\0' runs. */
430 while (f != eob) {
431 if (!(*t++ = *f++)) {
432 while (f != eob && *f == '\0')
433 f++;
434 }
435 }
436 ff_lastchar = f[-1];
437 if ((len = t - ff_xb.buf) != 0) {
438 /* This will not circle back to perform_io() because we only get
439 * called when there is plenty of room in the output buffer. */
440 write_buf(iobuf.out_fd, ff_xb.buf, len);
441 }
442 }
443}
444
445/* Perform buffered input and output until specified conditions are met. When
446 * given a "needed" read requirement, we'll return without doing any I/O if the
447 * iobuf.in bytes are already available. When reading, we'll read as many
448 * bytes as we can into the buffer, and return as soon as we meet the minimum
449 * read requirement. When given a "needed" write requirement, we'll return
450 * without doing any I/O if that many bytes will fit in the output buffer (we
451 * check either iobuf.out or iobuf.msg, depending on the flags). When writing,
452 * we write out as much as we can, and return as soon as the given free-space
453 * requirement is available.
454 *
455 * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
456 * will need to be split when the data needs to wrap around to the start. In
457 * order to help make this easier for some operations (such as the use of
458 * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
459 * the end that is not not counted in the "size". The iobuf.in buffer is not
460 * (currently) circular. To facilitate the handling of MSG_DATA bytes as they
461 * are read-from/written-into the buffers, see the three raw_* iobuf vars.
462 *
463 * When writing, we flush data in the following priority order:
464 *
465 * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
466 *
467 * 2. Write out all the messages from the message buf (if iobuf.msg is active).
468 * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
469 * messages before getting to the iobuf.out flushing (except for rule 1).
470 *
471 * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
472 * MSG_DATA header that was pre-allocated (when output is multiplexed).
473 *
474 * TODO: items for possible future work:
475 *
476 * - Make this routine able to read the generator-to-receiver batch flow?
477 *
478 * - Make the input buffer circular?
479 *
480 * Unlike the old routines that this replaces, it is OK to read ahead as far as
481 * we can because the read_a_msg() routine now reads its bytes out of the input
482 * buffer. In the old days, only raw data was in the input buffer, and any
483 * unused raw data in the buf would prevent the reading of socket data. */
484static char *perform_io(size_t needed, int flags)
485{
486 fd_set r_fds, e_fds, w_fds;
487 struct timeval tv;
488 int cnt, max_fd;
489 size_t empty_buf_len = 0;
490 xbuf *out;
491 char *data;
492
493 if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
494 if (iobuf.raw_input_ends_before)
495 iobuf.raw_input_ends_before -= iobuf.in.pos;
496 iobuf.in.pos = 0;
497 }
498
499 switch (flags & PIO_NEED_FLAGS) {
500 case PIO_NEED_INPUT:
501 if (DEBUG_GTE(IO, 3)) {
502 rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
503 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
504 }
505
506 /* Make sure the input buffer is big enough to hold "needed" bytes.
507 * Also make sure it will fit in the free space at the end, or
508 * else we need to shift some bytes. */
509 if (needed && iobuf.in.size < needed) {
510 if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
511 out_of_memory("perform_io");
512 if (DEBUG_GTE(IO, 4)) {
513 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
514 who_am_i(), (long)iobuf.in.size, (long)needed);
515 }
516 iobuf.in.size = needed;
517 }
518 if (iobuf.in.size - iobuf.in.pos < needed
519 || (iobuf.in.len < needed && iobuf.in.len < 1024
520 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
521 memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
522 if (DEBUG_GTE(IO, 4)) {
523 rprintf(FINFO,
524 "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
525 who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
526 }
527 if (iobuf.raw_input_ends_before)
528 iobuf.raw_input_ends_before -= iobuf.in.pos;
529 iobuf.in.pos = 0;
530 }
531 break;
532
533 case PIO_NEED_OUTROOM:
534 /* We never resize the circular output buffer. */
535 if (iobuf.out.size - iobuf.out_empty_len < needed) {
536 fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
537 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
538 exit_cleanup(RERR_PROTOCOL);
539 }
540
541 if (DEBUG_GTE(IO, 3)) {
542 rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
543 who_am_i(), (long)needed,
544 iobuf.out.len > iobuf.out.size - needed
545 ? (long)iobuf.out.len - (iobuf.out.size - needed) : 0L);
546 }
547 break;
548
549 case PIO_NEED_MSGROOM:
550 /* We never resize the circular message buffer. */
551 if (iobuf.msg.size < needed) {
552 fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
553 (long)needed, (long)iobuf.msg.size);
554 exit_cleanup(RERR_PROTOCOL);
555 }
556
557 if (DEBUG_GTE(IO, 3)) {
558 rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
559 who_am_i(), (long)needed,
560 iobuf.out.len > iobuf.msg.size - needed
561 ? (long)iobuf.out.len - (iobuf.msg.size - needed) : 0L);
562 }
563 break;
564
565 case 0:
566 if (DEBUG_GTE(IO, 3))
567 rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
568 break;
569
570 default:
571 exit_cleanup(RERR_UNSUPPORTED);
572 }
573
574 while (1) {
575 switch (flags & PIO_NEED_FLAGS) {
576 case PIO_NEED_INPUT:
577 if (iobuf.in.len >= needed)
578 goto double_break;
579 break;
580 case PIO_NEED_OUTROOM:
581 if (iobuf.out.len <= iobuf.out.size - needed)
582 goto double_break;
583 break;
584 case PIO_NEED_MSGROOM:
585 if (iobuf.msg.len <= iobuf.msg.size - needed)
586 goto double_break;
587 break;
588 }
589
590 max_fd = -1;
591
592 FD_ZERO(&r_fds);
593 FD_ZERO(&e_fds);
594 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
595 if (!read_batch || batch_fd >= 0) {
596 FD_SET(iobuf.in_fd, &r_fds);
597 FD_SET(iobuf.in_fd, &e_fds);
598 }
599 if (iobuf.in_fd > max_fd)
600 max_fd = iobuf.in_fd;
601 }
602
603 /* Only do more filesfrom processing if there is enough room in the out buffer. */
604 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
605 FD_SET(ff_forward_fd, &r_fds);
606 if (ff_forward_fd > max_fd)
607 max_fd = ff_forward_fd;
608 }
609
610 FD_ZERO(&w_fds);
611 if (iobuf.out_fd >= 0) {
612 if (iobuf.raw_flushing_ends_before
613 || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
614 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
615 size_t val;
616
617 /* The iobuf.raw_flushing_ends_before value can point off the end
618 * of the iobuf.out buffer for a while, for easier subtracting. */
619 iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
620
621 SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
622 ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
623 if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
624 /* We used some of the overflow bytes, so move them. */
625 if (DEBUG_GTE(IO, 4)) {
626 rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
627 who_am_i(), (int)val);
628 }
629 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
630 }
631
632 if (DEBUG_GTE(IO, 1)) {
633 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
634 who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
635 }
636
637 /* reserve room for the next MSG_DATA header */
638 iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
639 if (iobuf.raw_data_header_pos >= iobuf.out.size)
640 iobuf.raw_data_header_pos -= iobuf.out.size;
641 /* Yes, it is possible for this to make len > size for a while. */
642 iobuf.out.len += 4;
643 }
644
645 empty_buf_len = iobuf.out_empty_len;
646 out = &iobuf.out;
647 } else if (iobuf.msg.len) {
648 empty_buf_len = 0;
649 out = &iobuf.msg;
650 } else
651 out = NULL;
652 if (out) {
653 FD_SET(iobuf.out_fd, &w_fds);
654 if (iobuf.out_fd > max_fd)
655 max_fd = iobuf.out_fd;
656 }
657 } else
658 out = NULL;
659
660 if (max_fd < 0) {
661 switch (flags & PIO_NEED_FLAGS) {
662 case PIO_NEED_INPUT:
663 rprintf(FERROR, "error in perform_io: no fd for input.\n");
664 exit_cleanup(RERR_PROTOCOL);
665 case PIO_NEED_OUTROOM:
666 case PIO_NEED_MSGROOM:
667 msgs2stderr = 1;
668 rprintf(FERROR, "error in perform_io: no fd for output.\n");
669 exit_cleanup(RERR_PROTOCOL);
670 default:
671 /* No stated needs, so I guess this is OK. */
672 break;
673 }
674 break;
675 }
676
677 if (extra_flist_sending_enabled) {
678 if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
679 && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
680 tv.tv_sec = 0;
681 else {
682 extra_flist_sending_enabled = False;
683 tv.tv_sec = select_timeout;
684 }
685 } else
686 tv.tv_sec = select_timeout;
687 tv.tv_usec = 0;
688
689 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
690
691 if (cnt <= 0) {
692 if (cnt < 0 && errno == EBADF) {
693 msgs2stderr = 1;
694 exit_cleanup(RERR_SOCKETIO);
695 }
696 if (extra_flist_sending_enabled) {
697 extra_flist_sending_enabled = False;
698 send_extra_file_list(sock_f_out, -1);
699 extra_flist_sending_enabled = !flist_eof;
700 } else
701 check_timeout();
702 FD_ZERO(&r_fds); /* Just in case... */
703 FD_ZERO(&w_fds);
704 }
705
706 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
707 size_t pos = iobuf.in.pos + iobuf.in.len;
708 size_t len = iobuf.in.size - pos;
709 int n;
710 if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
711 if (n == 0) {
712 if (!read_batch || batch_fd < 0 || am_generator)
713 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
714 batch_fd = -1;
715 continue;
716 }
717 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
718 n = 0;
719 else {
720 /* Don't write errors on a dead socket. */
721 if (iobuf.in_fd == sock_f_in) {
722 if (am_sender)
723 msgs2stderr = 1;
724 rsyserr(FERROR_SOCKET, errno, "read error");
725 } else
726 rsyserr(FERROR, errno, "read error");
727 exit_cleanup(RERR_STREAMIO);
728 }
729 }
730 if (msgs2stderr && DEBUG_GTE(IO, 2))
731 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
732
733 if (io_timeout)
734 last_io_in = time(NULL);
735 stats.total_read += n;
736
737 iobuf.in.len += n;
738 }
739
740 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
741 size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
742 int n;
743
744 if (bwlimit_writemax && len > bwlimit_writemax)
745 len = bwlimit_writemax;
746
747 if (out->pos + len > out->size)
748 len = out->size - out->pos;
749 if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
750 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
751 n = 0;
752 else {
753 /* Don't write errors on a dead socket. */
754 msgs2stderr = 1;
755 out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
756 rsyserr(FERROR_SOCKET, errno, "[%s] write error", who_am_i());
757 exit_cleanup(RERR_STREAMIO);
758 }
759 }
760 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
761 rprintf(FINFO, "[%s] %s sent=%ld\n",
762 who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
763 }
764
765 if (io_timeout)
766 last_io_out = time(NULL);
767 stats.total_written += n;
768
769 if (bwlimit_writemax)
770 sleep_for_bwlimit(n);
771
772 if ((out->pos += n) == out->size) {
773 if (iobuf.raw_flushing_ends_before)
774 iobuf.raw_flushing_ends_before -= out->size;
775 out->pos = 0;
776 }
777 if (out->pos == iobuf.raw_flushing_ends_before)
778 iobuf.raw_flushing_ends_before = 0;
779 if ((out->len -= n) == empty_buf_len) {
780 out->pos = 0;
781 if (empty_buf_len)
782 iobuf.raw_data_header_pos = 0;
783 }
784 }
785
786 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
787 /* This can potentially flush all output and enable
788 * multiplexed output, so keep this last in the loop
789 * and be sure to not cache anything that would break
790 * such a change. */
791 forward_filesfrom_data();
792 }
793 }
794 double_break:
795
796 data = iobuf.in.buf + iobuf.in.pos;
797
798 if (flags & PIO_CONSUME_INPUT) {
799 iobuf.in.len -= needed;
800 iobuf.in.pos += needed;
801 }
802
803 return data;
804}
805
806void noop_io_until_death(void)
807{
808 char buf[1024];
809
810 kluge_around_eof = 1;
811 set_io_timeout(protocol_version >= 31 ? 10 : 1);
812
813 while (1)
814 read_buf(iobuf.in_fd, buf, sizeof buf);
815}
816
817/* Buffer a message for the multiplexed output stream. Is never used for MSG_DATA. */
818int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
819{
820 char *hdr;
821 size_t pos;
822 BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
823
824 if (!OUT_MULTIPLEXED)
825 return 0;
826
827 if (want_debug)
828 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
829
830#ifdef ICONV_OPTION
831 if (convert > 0 && ic_send == (iconv_t)-1)
832 convert = 0;
833 if (convert > 0) {
834 /* Ensuring double-size room leaves space for a potential conversion. */
835 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
836 perform_io(len*2 + 4, PIO_NEED_MSGROOM);
837 } else
838#endif
839 if (iobuf.msg.len + len + 4 > iobuf.msg.size)
840 perform_io(len + 4, PIO_NEED_MSGROOM);
841
842 pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
843 if (pos >= iobuf.msg.size)
844 pos -= iobuf.msg.size;
845 hdr = iobuf.msg.buf + pos;
846
847 iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
848
849#ifdef ICONV_OPTION
850 if (convert > 0) {
851 xbuf inbuf;
852
853 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
854
855 len = iobuf.msg.len;
856 iconvbufs(ic_send, &inbuf, &iobuf.msg,
857 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
858 if (inbuf.len > 0) {
859 rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
860 exit_cleanup(RERR_UNSUPPORTED);
861 }
862 len = iobuf.msg.len - len;
863 } else
864#endif
865 {
866 size_t siz;
867
868 if ((pos += 4) >= iobuf.msg.size)
869 pos -= iobuf.msg.size;
870
871 /* Handle a split copy if we wrap around the end of the circular buffer. */
872 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
873 memcpy(iobuf.msg.buf + pos, buf, siz);
874 memcpy(iobuf.msg.buf, buf + siz, len - siz);
875 } else
876 memcpy(iobuf.msg.buf + pos, buf, len);
877
878 iobuf.msg.len += len;
879 }
880
881 SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
882 /* If the header used any overflow bytes, move them to the start. */
883 if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
884 size_t siz = pos - iobuf.msg.size;
885 if (DEBUG_GTE(IO, 4))
886 rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
887 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
888 }
889
890 if (want_debug && convert > 0)
891 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
892
893 return 1;
894}
895
896void send_msg_int(enum msgcode code, int num)
897{
898 char numbuf[4];
899
900 if (DEBUG_GTE(IO, 1))
901 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
902
903 SIVAL(numbuf, 0, num);
904 send_msg(code, numbuf, 4, -1);
905}
906
907static void got_flist_entry_status(enum festatus status, int ndx)
908{
909 struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
910
911 if (remove_source_files) {
912 active_filecnt--;
913 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
914 }
915
916 if (inc_recurse)
917 flist->in_progress--;
918
919 switch (status) {
920 case FES_SUCCESS:
921 if (remove_source_files)
922 send_msg_int(MSG_SUCCESS, ndx);
923 if (preserve_hard_links) {
924 struct file_struct *file = flist->files[ndx - flist->ndx_start];
925 if (F_IS_HLINKED(file)) {
926 flist_ndx_push(&hlink_list, ndx);
927 flist->in_progress++;
928 }
929 }
930 break;
931 case FES_REDO:
932 if (read_batch) {
933 if (inc_recurse)
934 flist->in_progress++;
935 break;
936 }
937 if (inc_recurse)
938 flist->to_redo++;
939 flist_ndx_push(&redo_list, ndx);
940 break;
941 case FES_NO_SEND:
942 break;
943 }
944}
945
946/* Note the fds used for the main socket (which might really be a pipe
947 * for a local transfer, but we can ignore that). */
948void io_set_sock_fds(int f_in, int f_out)
949{
950 sock_f_in = f_in;
951 sock_f_out = f_out;
952}
953
954void set_io_timeout(int secs)
955{
956 io_timeout = secs;
957
958 if (!io_timeout || io_timeout > SELECT_TIMEOUT)
959 select_timeout = SELECT_TIMEOUT;
960 else
961 select_timeout = io_timeout;
962
963 allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
964}
965
966static void check_for_d_option_error(const char *msg)
967{
968 static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
969 char *colon;
970 int saw_d = 0;
971
972 if (*msg != 'r'
973 || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
974 return;
975
976 msg += sizeof REMOTE_OPTION_ERROR - 1;
977 if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
978 || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
979 return;
980
981 for ( ; *msg != ':'; msg++) {
982 if (*msg == 'd')
983 saw_d = 1;
984 else if (*msg == 'e')
985 break;
986 else if (strchr(rsync263_opts, *msg) == NULL)
987 return;
988 }
989
990 if (saw_d) {
991 rprintf(FWARNING,
992 "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
993 }
994}
995
996/* This is used by the generator to limit how many file transfers can
997 * be active at once when --remove-source-files is specified. Without
998 * this, sender-side deletions were mostly happening at the end. */
999void increment_active_files(int ndx, int itemizing, enum logcode code)
1000{
1001 while (1) {
1002 /* TODO: tune these limits? */
1003 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
1004 if (active_filecnt < limit)
1005 break;
1006 check_for_finished_files(itemizing, code, 0);
1007 if (active_filecnt < limit)
1008 break;
1009 wait_for_receiver();
1010 }
1011
1012 active_filecnt++;
1013 active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1014}
1015
1016int get_redo_num(void)
1017{
1018 return flist_ndx_pop(&redo_list);
1019}
1020
1021int get_hlink_num(void)
1022{
1023 return flist_ndx_pop(&hlink_list);
1024}
1025
1026/* When we're the receiver and we have a local --files-from list of names
1027 * that needs to be sent over the socket to the sender, we have to do two
1028 * things at the same time: send the sender a list of what files we're
1029 * processing and read the incoming file+info list from the sender. We do
1030 * this by making recv_file_list() call forward_filesfrom_data(), which
1031 * will ensure that we forward data to the sender until we get some data
1032 * for recv_file_list() to use. */
1033void start_filesfrom_forwarding(int fd)
1034{
1035 if (protocol_version < 31 && OUT_MULTIPLEXED) {
1036 /* Older protocols send the files-from data w/o packaging
1037 * it in multiplexed I/O packets, so temporarily switch
1038 * to buffered I/O to match this behavior. */
1039 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1040 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1041 }
1042 ff_forward_fd = fd;
1043
1044 alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1045}
1046
1047/* Read a line into the "buf" buffer. */
1048int read_line(int fd, char *buf, size_t bufsiz, int flags)
1049{
1050 char ch, *s, *eob;
1051
1052#ifdef ICONV_OPTION
1053 if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1054 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1055#endif
1056
1057 start:
1058#ifdef ICONV_OPTION
1059 s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1060#else
1061 s = buf;
1062#endif
1063 eob = s + bufsiz - 1;
1064 while (1) {
1065 /* We avoid read_byte() for files because files can return an EOF. */
1066 if (fd == iobuf.in_fd)
1067 ch = read_byte(fd);
1068 else if (safe_read(fd, &ch, 1) == 0)
1069 break;
1070 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1071 /* Skip empty lines if dumping comments. */
1072 if (flags & RL_DUMP_COMMENTS && s == buf)
1073 continue;
1074 break;
1075 }
1076 if (s < eob)
1077 *s++ = ch;
1078 }
1079 *s = '\0';
1080
1081 if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1082 goto start;
1083
1084#ifdef ICONV_OPTION
1085 if (flags & RL_CONVERT) {
1086 xbuf outbuf;
1087 INIT_XBUF(outbuf, buf, 0, bufsiz);
1088 iconv_buf.pos = 0;
1089 iconv_buf.len = s - iconv_buf.buf;
1090 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1091 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1092 outbuf.buf[outbuf.len] = '\0';
1093 return outbuf.len;
1094 }
1095#endif
1096
1097 return s - buf;
1098}
1099
1100void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1101 char ***argv_p, int *argc_p, char **request_p)
1102{
1103 int maxargs = MAX_ARGS;
1104 int dot_pos = 0;
1105 int argc = 0;
1106 char **argv, *p;
1107 int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1108
1109#ifdef ICONV_OPTION
1110 rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1111#endif
1112
1113 if (!(argv = new_array(char *, maxargs)))
1114 out_of_memory("read_args");
1115 if (mod_name && !protect_args)
1116 argv[argc++] = "rsyncd";
1117
1118 while (1) {
1119 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1120 break;
1121
1122 if (argc == maxargs-1) {
1123 maxargs += MAX_ARGS;
1124 if (!(argv = realloc_array(argv, char *, maxargs)))
1125 out_of_memory("read_args");
1126 }
1127
1128 if (dot_pos) {
1129 if (request_p) {
1130 *request_p = strdup(buf);
1131 request_p = NULL;
1132 }
1133 if (mod_name)
1134 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1135 else
1136 glob_expand(buf, &argv, &argc, &maxargs);
1137 } else {
1138 if (!(p = strdup(buf)))
1139 out_of_memory("read_args");
1140 argv[argc++] = p;
1141 if (*p == '.' && p[1] == '\0')
1142 dot_pos = argc;
1143 }
1144 }
1145 argv[argc] = NULL;
1146
1147 glob_expand(NULL, NULL, NULL, NULL);
1148
1149 *argc_p = argc;
1150 *argv_p = argv;
1151}
1152
1153BOOL io_start_buffering_out(int f_out)
1154{
1155 if (msgs2stderr && DEBUG_GTE(IO, 2))
1156 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1157
1158 if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1159 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1160 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1161 out_of_memory("io_start_buffering_out");
1162 iobuf.msg.pos = iobuf.msg.len = 0;
1163 }
1164
1165 if (iobuf.out.buf) {
1166 if (iobuf.out_fd == -1)
1167 iobuf.out_fd = f_out;
1168 assert(f_out == iobuf.out_fd);
1169 return False;
1170 }
1171
1172 iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1173 /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1174 if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1175 out_of_memory("io_start_buffering_out");
1176 iobuf.out.pos = iobuf.out.len = 0;
1177 iobuf.out_fd = f_out;
1178
1179 return True;
1180}
1181
1182BOOL io_start_buffering_in(int f_in)
1183{
1184 if (msgs2stderr && DEBUG_GTE(IO, 2))
1185 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1186
1187 if (iobuf.in.buf) {
1188 if (iobuf.in_fd == -1)
1189 iobuf.in_fd = f_in;
1190 assert(f_in == iobuf.in_fd);
1191 return False;
1192 }
1193
1194 iobuf.in.size = IO_BUFFER_SIZE;
1195 if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1196 out_of_memory("io_start_buffering_in");
1197
1198 iobuf.in.pos = iobuf.in.len = 0;
1199
1200 iobuf.in_fd = f_in;
1201
1202 return True;
1203}
1204
1205void io_end_buffering_in(BOOL free_buffers)
1206{
1207 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1208 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1209 who_am_i(), free_buffers ? "FREE" : "KEEP");
1210 }
1211
1212 if (free_buffers)
1213 free_xbuf(&iobuf.in);
1214 else
1215 iobuf.in.pos = iobuf.in.len = 0;
1216
1217 iobuf.in_fd = -1;
1218}
1219
1220void io_end_buffering_out(BOOL free_buffers)
1221{
1222 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1223 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1224 who_am_i(), free_buffers ? "FREE" : "KEEP");
1225 }
1226
1227 io_flush(FULL_FLUSH);
1228
1229 if (free_buffers) {
1230 free_xbuf(&iobuf.out);
1231 free_xbuf(&iobuf.msg);
1232 }
1233
1234 iobuf.out_fd = -1;
1235}
1236
1237void maybe_flush_socket(int important)
1238{
1239 if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1240 && (important || time(NULL) - last_io_out >= 5))
1241 io_flush(NORMAL_FLUSH);
1242}
1243
1244void maybe_send_keepalive(void)
1245{
1246 if (time(NULL) - last_io_out >= allowed_lull) {
1247 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1248 if (protocol_version < 29)
1249 return; /* there's nothing we can do */
1250 if (protocol_version >= 30)
1251 send_msg(MSG_NOOP, "", 0, 0);
1252 else {
1253 write_int(iobuf.out_fd, cur_flist->used);
1254 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1255 }
1256 }
1257 if (iobuf.msg.len)
1258 perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1259 else if (iobuf.out.len > iobuf.out_empty_len)
1260 io_flush(NORMAL_FLUSH);
1261 }
1262}
1263
1264void start_flist_forward(int ndx)
1265{
1266 write_int(iobuf.out_fd, ndx);
1267 forward_flist_data = 1;
1268}
1269
1270void stop_flist_forward(void)
1271{
1272 forward_flist_data = 0;
1273}
1274
1275/* Read a message from a multiplexed source. */
1276static void read_a_msg(void)
1277{
1278 char *data, line[BIGPATHBUFLEN];
1279 int tag, val;
1280 size_t msg_bytes;
1281
1282 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1283 tag = IVAL(data, 0);
1284
1285 msg_bytes = tag & 0xFFFFFF;
1286 tag = (tag >> 24) - MPLEX_BASE;
1287
1288 if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1289 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1290
1291 switch (tag) {
1292 case MSG_DATA:
1293 assert(iobuf.raw_input_ends_before == 0);
1294 /* Though this does not yet read the data, we do mark where in
1295 * the buffer the msg data will end once it is read. It is
1296 * possible that this points off the end of the buffer, in
1297 * which case the gradual reading of the input stream will
1298 * cause this value to decrease and eventually become real. */
1299 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1300 break;
1301 case MSG_STATS:
1302 if (msg_bytes != sizeof stats.total_read || !am_generator)
1303 goto invalid_msg;
1304 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1305 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1306 break;
1307 case MSG_REDO:
1308 if (msg_bytes != 4 || !am_generator)
1309 goto invalid_msg;
1310 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1311 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1312 break;
1313 case MSG_IO_ERROR:
1314 if (msg_bytes != 4 || am_sender)
1315 goto invalid_msg;
1316 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1317 io_error |= IVAL(data, 0);
1318 if (!am_generator)
1319 send_msg(MSG_IO_ERROR, data, 4, 0);
1320 break;
1321 case MSG_IO_TIMEOUT:
1322 if (msg_bytes != 4 || am_server || am_generator)
1323 goto invalid_msg;
1324 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1325 val = IVAL(data, 0);
1326 if (!io_timeout || io_timeout > val) {
1327 if (INFO_GTE(MISC, 2))
1328 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1329 set_io_timeout(val);
1330 }
1331 break;
1332 case MSG_NOOP:
1333 if (am_sender)
1334 maybe_send_keepalive();
1335 break;
1336 case MSG_DELETED:
1337 if (msg_bytes >= sizeof line)
1338 goto overflow;
1339 if (am_generator) {
1340 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1341 send_msg(MSG_DELETED, line, msg_bytes, 1);
1342 break;
1343 }
1344#ifdef ICONV_OPTION
1345 if (ic_recv != (iconv_t)-1) {
1346 xbuf outbuf, inbuf;
1347 char ibuf[512];
1348 int add_null = 0;
1349 int flags = ICB_INCLUDE_BAD | ICB_INIT;
1350
1351 INIT_CONST_XBUF(outbuf, line);
1352 INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1353
1354 while (msg_bytes) {
1355 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1356 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1357 inbuf.pos = 0;
1358 inbuf.len += len;
1359 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1360 inbuf.len--, add_null = 1;
1361 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1362 if (errno == E2BIG)
1363 goto overflow;
1364 /* Buffer ended with an incomplete char, so move the
1365 * bytes to the start of the buffer and continue. */
1366 memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1367 }
1368 flags &= ~ICB_INIT;
1369 }
1370 if (add_null) {
1371 if (outbuf.len == outbuf.size)
1372 goto overflow;
1373 outbuf.buf[outbuf.len++] = '\0';
1374 }
1375 msg_bytes = outbuf.len;
1376 } else
1377#endif
1378 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1379 /* A directory name was sent with the trailing null */
1380 if (msg_bytes > 0 && !line[msg_bytes-1])
1381 log_delete(line, S_IFDIR);
1382 else {
1383 line[msg_bytes] = '\0';
1384 log_delete(line, S_IFREG);
1385 }
1386 break;
1387 case MSG_SUCCESS:
1388 if (msg_bytes != 4) {
1389 invalid_msg:
1390 rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1391 tag, (unsigned long)msg_bytes, who_am_i(),
1392 inc_recurse ? "/inc" : "");
1393 exit_cleanup(RERR_STREAMIO);
1394 }
1395 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1396 if (am_generator)
1397 got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1398 else
1399 successful_send(IVAL(data, 0));
1400 break;
1401 case MSG_NO_SEND:
1402 if (msg_bytes != 4)
1403 goto invalid_msg;
1404 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1405 if (am_generator)
1406 got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1407 else
1408 send_msg(MSG_NO_SEND, data, 4, 0);
1409 break;
1410 case MSG_ERROR_SOCKET:
1411 case MSG_ERROR_UTF8:
1412 case MSG_CLIENT:
1413 case MSG_LOG:
1414 if (!am_generator)
1415 goto invalid_msg;
1416 if (tag == MSG_ERROR_SOCKET)
1417 msgs2stderr = 1;
1418 /* FALL THROUGH */
1419 case MSG_INFO:
1420 case MSG_ERROR:
1421 case MSG_ERROR_XFER:
1422 case MSG_WARNING:
1423 if (msg_bytes >= sizeof line) {
1424 overflow:
1425 rprintf(FERROR,
1426 "multiplexing overflow %d:%lu [%s%s]\n",
1427 tag, (unsigned long)msg_bytes, who_am_i(),
1428 inc_recurse ? "/inc" : "");
1429 exit_cleanup(RERR_STREAMIO);
1430 }
1431 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1432 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1433 if (first_message) {
1434 if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1435 line[msg_bytes] = '\0';
1436 check_for_d_option_error(line);
1437 }
1438 first_message = 0;
1439 }
1440 break;
1441 case MSG_ERROR_EXIT:
1442 if (msg_bytes == 0) {
1443 if (!am_sender && !am_generator) {
1444 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1445 io_flush(FULL_FLUSH);
1446 }
1447 val = 0;
1448 } else if (msg_bytes == 4) {
1449 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1450 val = IVAL(data, 0);
1451 if (protocol_version >= 31) {
1452 if (am_generator)
1453 send_msg_int(MSG_ERROR_EXIT, val);
1454 else
1455 send_msg(MSG_ERROR_EXIT, "", 0, 0);
1456 }
1457 } else
1458 goto invalid_msg;
1459 /* Send a negative linenum so that we don't end up
1460 * with a duplicate exit message. */
1461 _exit_cleanup(val, __FILE__, 0 - __LINE__);
1462 default:
1463 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1464 tag, who_am_i(), inc_recurse ? "/inc" : "");
1465 exit_cleanup(RERR_STREAMIO);
1466 }
1467}
1468
1469void wait_for_receiver(void)
1470{
1471 if (!iobuf.raw_input_ends_before)
1472 read_a_msg();
1473
1474 if (iobuf.raw_input_ends_before) {
1475 int ndx = read_int(iobuf.in_fd);
1476 if (ndx < 0) {
1477 switch (ndx) {
1478 case NDX_FLIST_EOF:
1479 flist_eof = 1;
1480 if (DEBUG_GTE(FLIST, 3))
1481 rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1482 break;
1483 case NDX_DONE:
1484 msgdone_cnt++;
1485 break;
1486 default:
1487 exit_cleanup(RERR_STREAMIO);
1488 }
1489 } else {
1490 struct file_list *flist;
1491 if (DEBUG_GTE(FLIST, 2)) {
1492 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1493 who_am_i(), ndx);
1494 }
1495 flist = recv_file_list(iobuf.in_fd);
1496 flist->parent_ndx = ndx;
1497#ifdef SUPPORT_HARD_LINKS
1498 if (preserve_hard_links)
1499 match_hard_links(flist);
1500#endif
1501 }
1502 }
1503}
1504
1505unsigned short read_shortint(int f)
1506{
1507 char b[2];
1508 read_buf(f, b, 2);
1509 return (UVAL(b, 1) << 8) + UVAL(b, 0);
1510}
1511
1512int32 read_int(int f)
1513{
1514 char b[4];
1515 int32 num;
1516
1517 read_buf(f, b, 4);
1518 num = IVAL(b, 0);
1519#if SIZEOF_INT32 > 4
1520 if (num & (int32)0x80000000)
1521 num |= ~(int32)0xffffffff;
1522#endif
1523 return num;
1524}
1525
1526int32 read_varint(int f)
1527{
1528 union {
1529 char b[5];
1530 int32 x;
1531 } u;
1532 uchar ch;
1533 int extra;
1534
1535 u.x = 0;
1536 ch = read_byte(f);
1537 extra = int_byte_extra[ch / 4];
1538 if (extra) {
1539 uchar bit = ((uchar)1<<(8-extra));
1540 if (extra >= (int)sizeof u.b) {
1541 rprintf(FERROR, "Overflow in read_varint()\n");
1542 exit_cleanup(RERR_STREAMIO);
1543 }
1544 read_buf(f, u.b, extra);
1545 u.b[extra] = ch & (bit-1);
1546 } else
1547 u.b[0] = ch;
1548#if CAREFUL_ALIGNMENT
1549 u.x = IVAL(u.b,0);
1550#endif
1551#if SIZEOF_INT32 > 4
1552 if (u.x & (int32)0x80000000)
1553 u.x |= ~(int32)0xffffffff;
1554#endif
1555 return u.x;
1556}
1557
1558int64 read_varlong(int f, uchar min_bytes)
1559{
1560 union {
1561 char b[9];
1562 int64 x;
1563 } u;
1564 char b2[8];
1565 int extra;
1566
1567#if SIZEOF_INT64 < 8
1568 memset(u.b, 0, 8);
1569#else
1570 u.x = 0;
1571#endif
1572 read_buf(f, b2, min_bytes);
1573 memcpy(u.b, b2+1, min_bytes-1);
1574 extra = int_byte_extra[CVAL(b2, 0) / 4];
1575 if (extra) {
1576 uchar bit = ((uchar)1<<(8-extra));
1577 if (min_bytes + extra > (int)sizeof u.b) {
1578 rprintf(FERROR, "Overflow in read_varlong()\n");
1579 exit_cleanup(RERR_STREAMIO);
1580 }
1581 read_buf(f, u.b + min_bytes - 1, extra);
1582 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1583#if SIZEOF_INT64 < 8
1584 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1585 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1586 exit_cleanup(RERR_UNSUPPORTED);
1587 }
1588#endif
1589 } else
1590 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1591#if SIZEOF_INT64 < 8
1592 u.x = IVAL(u.b,0);
1593#elif CAREFUL_ALIGNMENT
1594 u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1595#endif
1596 return u.x;
1597}
1598
1599int64 read_longint(int f)
1600{
1601#if SIZEOF_INT64 >= 8
1602 char b[9];
1603#endif
1604 int32 num = read_int(f);
1605
1606 if (num != (int32)0xffffffff)
1607 return num;
1608
1609#if SIZEOF_INT64 < 8
1610 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1611 exit_cleanup(RERR_UNSUPPORTED);
1612#else
1613 read_buf(f, b, 8);
1614 return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1615#endif
1616}
1617
1618void read_buf(int f, char *buf, size_t len)
1619{
1620 if (f != iobuf.in_fd) {
1621 if (safe_read(f, buf, len) != len)
1622 whine_about_eof(f); /* Doesn't return. */
1623 goto batch_copy;
1624 }
1625
1626 if (!IN_MULTIPLEXED) {
1627 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1628 total_data_read += len;
1629 if (forward_flist_data)
1630 write_buf(iobuf.out_fd, buf, len);
1631 batch_copy:
1632 if (f == write_batch_monitor_in)
1633 safe_write(batch_fd, buf, len);
1634 return;
1635 }
1636
1637 while (1) {
1638 char *data;
1639 size_t siz;
1640
1641 while (!iobuf.raw_input_ends_before)
1642 read_a_msg();
1643
1644 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1645 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1646 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1647 iobuf.raw_input_ends_before = 0;
1648
1649 /* The bytes at the "data" pointer will survive long
1650 * enough to make a copy, but not past future I/O. */
1651 memcpy(buf, data, siz);
1652 total_data_read += siz;
1653
1654 if (forward_flist_data)
1655 write_buf(iobuf.out_fd, buf, siz);
1656
1657 if (f == write_batch_monitor_in)
1658 safe_write(batch_fd, buf, siz);
1659
1660 if ((len -= siz) == 0)
1661 break;
1662 buf += siz;
1663 }
1664}
1665
1666void read_sbuf(int f, char *buf, size_t len)
1667{
1668 read_buf(f, buf, len);
1669 buf[len] = '\0';
1670}
1671
1672uchar read_byte(int f)
1673{
1674 uchar c;
1675 read_buf(f, (char*)&c, 1);
1676 return c;
1677}
1678
1679int read_vstring(int f, char *buf, int bufsize)
1680{
1681 int len = read_byte(f);
1682
1683 if (len & 0x80)
1684 len = (len & ~0x80) * 0x100 + read_byte(f);
1685
1686 if (len >= bufsize) {
1687 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1688 len, bufsize - 1);
1689 return -1;
1690 }
1691
1692 if (len)
1693 read_buf(f, buf, len);
1694 buf[len] = '\0';
1695 return len;
1696}
1697
1698/* Populate a sum_struct with values from the socket. This is
1699 * called by both the sender and the receiver. */
1700void read_sum_head(int f, struct sum_struct *sum)
1701{
1702 int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1703 sum->count = read_int(f);
1704 if (sum->count < 0) {
1705 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1706 (long)sum->count, who_am_i());
1707 exit_cleanup(RERR_PROTOCOL);
1708 }
1709 sum->blength = read_int(f);
1710 if (sum->blength < 0 || sum->blength > max_blength) {
1711 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1712 (long)sum->blength, who_am_i());
1713 exit_cleanup(RERR_PROTOCOL);
1714 }
1715 sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1716 if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1717 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1718 sum->s2length, who_am_i());
1719 exit_cleanup(RERR_PROTOCOL);
1720 }
1721 sum->remainder = read_int(f);
1722 if (sum->remainder < 0 || sum->remainder > sum->blength) {
1723 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1724 (long)sum->remainder, who_am_i());
1725 exit_cleanup(RERR_PROTOCOL);
1726 }
1727}
1728
1729/* Send the values from a sum_struct over the socket. Set sum to
1730 * NULL if there are no checksums to send. This is called by both
1731 * the generator and the sender. */
1732void write_sum_head(int f, struct sum_struct *sum)
1733{
1734 static struct sum_struct null_sum;
1735
1736 if (sum == NULL)
1737 sum = &null_sum;
1738
1739 write_int(f, sum->count);
1740 write_int(f, sum->blength);
1741 if (protocol_version >= 27)
1742 write_int(f, sum->s2length);
1743 write_int(f, sum->remainder);
1744}
1745
1746/* Sleep after writing to limit I/O bandwidth usage.
1747 *
1748 * @todo Rather than sleeping after each write, it might be better to
1749 * use some kind of averaging. The current algorithm seems to always
1750 * use a bit less bandwidth than specified, because it doesn't make up
1751 * for slow periods. But arguably this is a feature. In addition, we
1752 * ought to take the time used to write the data into account.
1753 *
1754 * During some phases of big transfers (file FOO is uptodate) this is
1755 * called with a small bytes_written every time. As the kernel has to
1756 * round small waits up to guarantee that we actually wait at least the
1757 * requested number of microseconds, this can become grossly inaccurate.
1758 * We therefore keep track of the bytes we've written over time and only
1759 * sleep when the accumulated delay is at least 1 tenth of a second. */
1760static void sleep_for_bwlimit(int bytes_written)
1761{
1762 static struct timeval prior_tv;
1763 static long total_written = 0;
1764 struct timeval tv, start_tv;
1765 long elapsed_usec, sleep_usec;
1766
1767#define ONE_SEC 1000000L /* # of microseconds in a second */
1768
1769 total_written += bytes_written;
1770
1771 gettimeofday(&start_tv, NULL);
1772 if (prior_tv.tv_sec) {
1773 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1774 + (start_tv.tv_usec - prior_tv.tv_usec);
1775 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1776 if (total_written < 0)
1777 total_written = 0;
1778 }
1779
1780 sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1781 if (sleep_usec < ONE_SEC / 10) {
1782 prior_tv = start_tv;
1783 return;
1784 }
1785
1786 tv.tv_sec = sleep_usec / ONE_SEC;
1787 tv.tv_usec = sleep_usec % ONE_SEC;
1788 select(0, NULL, NULL, NULL, &tv);
1789
1790 gettimeofday(&prior_tv, NULL);
1791 elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1792 + (prior_tv.tv_usec - start_tv.tv_usec);
1793 total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1794}
1795
1796void io_flush(int flush_it_all)
1797{
1798 if (iobuf.out.len > iobuf.out_empty_len) {
1799 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1800 perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1801 else /* NORMAL_FLUSH: flush at least 1 byte */
1802 perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1803 }
1804 if (iobuf.msg.len)
1805 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1806}
1807
1808void write_shortint(int f, unsigned short x)
1809{
1810 char b[2];
1811 b[0] = (char)x;
1812 b[1] = (char)(x >> 8);
1813 write_buf(f, b, 2);
1814}
1815
1816void write_int(int f, int32 x)
1817{
1818 char b[4];
1819 SIVAL(b, 0, x);
1820 write_buf(f, b, 4);
1821}
1822
1823void write_varint(int f, int32 x)
1824{
1825 char b[5];
1826 uchar bit;
1827 int cnt = 4;
1828
1829 SIVAL(b, 1, x);
1830
1831 while (cnt > 1 && b[cnt] == 0)
1832 cnt--;
1833 bit = ((uchar)1<<(7-cnt+1));
1834 if (CVAL(b, cnt) >= bit) {
1835 cnt++;
1836 *b = ~(bit-1);
1837 } else if (cnt > 1)
1838 *b = b[cnt] | ~(bit*2-1);
1839 else
1840 *b = b[cnt];
1841
1842 write_buf(f, b, cnt);
1843}
1844
1845void write_varlong(int f, int64 x, uchar min_bytes)
1846{
1847 char b[9];
1848 uchar bit;
1849 int cnt = 8;
1850
1851 SIVAL(b, 1, x);
1852#if SIZEOF_INT64 >= 8
1853 SIVAL(b, 5, x >> 32);
1854#else
1855 if (x <= 0x7FFFFFFF && x >= 0)
1856 memset(b + 5, 0, 4);
1857 else {
1858 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1859 exit_cleanup(RERR_UNSUPPORTED);
1860 }
1861#endif
1862
1863 while (cnt > min_bytes && b[cnt] == 0)
1864 cnt--;
1865 bit = ((uchar)1<<(7-cnt+min_bytes));
1866 if (CVAL(b, cnt) >= bit) {
1867 cnt++;
1868 *b = ~(bit-1);
1869 } else if (cnt > min_bytes)
1870 *b = b[cnt] | ~(bit*2-1);
1871 else
1872 *b = b[cnt];
1873
1874 write_buf(f, b, cnt);
1875}
1876
1877/*
1878 * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1879 * 64-bit types on this platform.
1880 */
1881void write_longint(int f, int64 x)
1882{
1883 char b[12], * const s = b+4;
1884
1885 SIVAL(s, 0, x);
1886 if (x <= 0x7FFFFFFF && x >= 0) {
1887 write_buf(f, s, 4);
1888 return;
1889 }
1890
1891#if SIZEOF_INT64 < 8
1892 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1893 exit_cleanup(RERR_UNSUPPORTED);
1894#else
1895 memset(b, 0xFF, 4);
1896 SIVAL(s, 4, x >> 32);
1897 write_buf(f, b, 12);
1898#endif
1899}
1900
1901void write_buf(int f, const char *buf, size_t len)
1902{
1903 size_t pos, siz;
1904
1905 if (f != iobuf.out_fd) {
1906 safe_write(f, buf, len);
1907 goto batch_copy;
1908 }
1909
1910 if (iobuf.out.len + len > iobuf.out.size)
1911 perform_io(len, PIO_NEED_OUTROOM);
1912
1913 pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1914 if (pos >= iobuf.out.size)
1915 pos -= iobuf.out.size;
1916
1917 /* Handle a split copy if we wrap around the end of the circular buffer. */
1918 if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1919 memcpy(iobuf.out.buf + pos, buf, siz);
1920 memcpy(iobuf.out.buf, buf + siz, len - siz);
1921 } else
1922 memcpy(iobuf.out.buf + pos, buf, len);
1923
1924 iobuf.out.len += len;
1925 total_data_written += len;
1926
1927 batch_copy:
1928 if (f == write_batch_monitor_out)
1929 safe_write(batch_fd, buf, len);
1930}
1931
1932/* Write a string to the connection */
1933void write_sbuf(int f, const char *buf)
1934{
1935 write_buf(f, buf, strlen(buf));
1936}
1937
1938void write_byte(int f, uchar c)
1939{
1940 write_buf(f, (char *)&c, 1);
1941}
1942
1943void write_vstring(int f, const char *str, int len)
1944{
1945 uchar lenbuf[3], *lb = lenbuf;
1946
1947 if (len > 0x7F) {
1948 if (len > 0x7FFF) {
1949 rprintf(FERROR,
1950 "attempting to send over-long vstring (%d > %d)\n",
1951 len, 0x7FFF);
1952 exit_cleanup(RERR_PROTOCOL);
1953 }
1954 *lb++ = len / 0x100 + 0x80;
1955 }
1956 *lb = len;
1957
1958 write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1959 if (len)
1960 write_buf(f, str, len);
1961}
1962
1963/* Send a file-list index using a byte-reduction method. */
1964void write_ndx(int f, int32 ndx)
1965{
1966 static int32 prev_positive = -1, prev_negative = 1;
1967 int32 diff, cnt = 0;
1968 char b[6];
1969
1970 if (protocol_version < 30 || read_batch) {
1971 write_int(f, ndx);
1972 return;
1973 }
1974
1975 /* Send NDX_DONE as a single-byte 0 with no side effects. Send
1976 * negative nums as a positive after sending a leading 0xFF. */
1977 if (ndx >= 0) {
1978 diff = ndx - prev_positive;
1979 prev_positive = ndx;
1980 } else if (ndx == NDX_DONE) {
1981 *b = 0;
1982 write_buf(f, b, 1);
1983 return;
1984 } else {
1985 b[cnt++] = (char)0xFF;
1986 ndx = -ndx;
1987 diff = ndx - prev_negative;
1988 prev_negative = ndx;
1989 }
1990
1991 /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1992 * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1993 * & all 4 bytes of the (non-negative) num with the high-bit set. */
1994 if (diff < 0xFE && diff > 0)
1995 b[cnt++] = (char)diff;
1996 else if (diff < 0 || diff > 0x7FFF) {
1997 b[cnt++] = (char)0xFE;
1998 b[cnt++] = (char)((ndx >> 24) | 0x80);
1999 b[cnt++] = (char)ndx;
2000 b[cnt++] = (char)(ndx >> 8);
2001 b[cnt++] = (char)(ndx >> 16);
2002 } else {
2003 b[cnt++] = (char)0xFE;
2004 b[cnt++] = (char)(diff >> 8);
2005 b[cnt++] = (char)diff;
2006 }
2007 write_buf(f, b, cnt);
2008}
2009
2010/* Receive a file-list index using a byte-reduction method. */
2011int32 read_ndx(int f)
2012{
2013 static int32 prev_positive = -1, prev_negative = 1;
2014 int32 *prev_ptr, num;
2015 char b[4];
2016
2017 if (protocol_version < 30)
2018 return read_int(f);
2019
2020 read_buf(f, b, 1);
2021 if (CVAL(b, 0) == 0xFF) {
2022 read_buf(f, b, 1);
2023 prev_ptr = &prev_negative;
2024 } else if (CVAL(b, 0) == 0)
2025 return NDX_DONE;
2026 else
2027 prev_ptr = &prev_positive;
2028 if (CVAL(b, 0) == 0xFE) {
2029 read_buf(f, b, 2);
2030 if (CVAL(b, 0) & 0x80) {
2031 b[3] = CVAL(b, 0) & ~0x80;
2032 b[0] = b[1];
2033 read_buf(f, b+1, 2);
2034 num = IVAL(b, 0);
2035 } else
2036 num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2037 } else
2038 num = UVAL(b, 0) + *prev_ptr;
2039 *prev_ptr = num;
2040 if (prev_ptr == &prev_negative)
2041 num = -num;
2042 return num;
2043}
2044
2045/* Read a line of up to bufsiz-1 characters into buf. Strips
2046 * the (required) trailing newline and all carriage returns.
2047 * Returns 1 for success; 0 for I/O error or truncation. */
2048int read_line_old(int fd, char *buf, size_t bufsiz)
2049{
2050 bufsiz--; /* leave room for the null */
2051 while (bufsiz > 0) {
2052 assert(fd != iobuf.in_fd);
2053 if (safe_read(fd, buf, 1) == 0)
2054 return 0;
2055 if (*buf == '\0')
2056 return 0;
2057 if (*buf == '\n')
2058 break;
2059 if (*buf != '\r') {
2060 buf++;
2061 bufsiz--;
2062 }
2063 }
2064 *buf = '\0';
2065 return bufsiz > 0;
2066}
2067
2068void io_printf(int fd, const char *format, ...)
2069{
2070 va_list ap;
2071 char buf[BIGPATHBUFLEN];
2072 int len;
2073
2074 va_start(ap, format);
2075 len = vsnprintf(buf, sizeof buf, format, ap);
2076 va_end(ap);
2077
2078 if (len < 0)
2079 exit_cleanup(RERR_STREAMIO);
2080
2081 if (len > (int)sizeof buf) {
2082 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2083 exit_cleanup(RERR_STREAMIO);
2084 }
2085
2086 write_sbuf(fd, buf);
2087}
2088
2089/* Setup for multiplexing a MSG_* stream with the data stream. */
2090void io_start_multiplex_out(int fd)
2091{
2092 io_flush(FULL_FLUSH);
2093
2094 if (msgs2stderr && DEBUG_GTE(IO, 2))
2095 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2096
2097 iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2098 io_start_buffering_out(fd);
2099
2100 iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2101 iobuf.out.len += 4;
2102}
2103
2104/* Setup for multiplexing a MSG_* stream with the data stream. */
2105void io_start_multiplex_in(int fd)
2106{
2107 if (msgs2stderr && DEBUG_GTE(IO, 2))
2108 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2109
2110 iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2111 io_start_buffering_in(fd);
2112}
2113
2114int io_end_multiplex_in(int mode)
2115{
2116 int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2117
2118 if (msgs2stderr && DEBUG_GTE(IO, 2))
2119 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2120
2121 iobuf.in_multiplexed = False;
2122 if (mode == MPLX_SWITCHING)
2123 iobuf.raw_input_ends_before = 0;
2124 else
2125 assert(iobuf.raw_input_ends_before == 0);
2126 if (mode != MPLX_TO_BUFFERED)
2127 io_end_buffering_in(mode);
2128
2129 return ret;
2130}
2131
2132int io_end_multiplex_out(int mode)
2133{
2134 int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2135
2136 if (msgs2stderr && DEBUG_GTE(IO, 2))
2137 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2138
2139 if (mode != MPLX_TO_BUFFERED)
2140 io_end_buffering_out(mode);
2141 else
2142 io_flush(FULL_FLUSH);
2143
2144 iobuf.out.len = 0;
2145 iobuf.out_empty_len = 0;
2146
2147 return ret;
2148}
2149
2150void start_write_batch(int fd)
2151{
2152 /* Some communication has already taken place, but we don't
2153 * enable batch writing until here so that we can write a
2154 * canonical record of the communication even though the
2155 * actual communication so far depends on whether a daemon
2156 * is involved. */
2157 write_int(batch_fd, protocol_version);
2158 if (protocol_version >= 30)
2159 write_byte(batch_fd, inc_recurse);
2160 write_int(batch_fd, checksum_seed);
2161
2162 if (am_sender)
2163 write_batch_monitor_out = fd;
2164 else
2165 write_batch_monitor_in = fd;
2166}
2167
2168void stop_write_batch(void)
2169{
2170 write_batch_monitor_out = -1;
2171 write_batch_monitor_in = -1;
2172}