A daemon treats --msgs2stderr as "output only to the log, not the user".
[rsync/rsync.git] / io.c
... / ...
CommitLineData
1/*
2 * Socket and pipe I/O utilities used in rsync.
3 *
4 * Copyright (C) 1996-2001 Andrew Tridgell
5 * Copyright (C) 1996 Paul Mackerras
6 * Copyright (C) 2001, 2002 Martin Pool <mbp@samba.org>
7 * Copyright (C) 2003-2009 Wayne Davison
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 3 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License along
20 * with this program; if not, visit the http://fsf.org website.
21 */
22
23/* Rsync provides its own multiplexing system, which is used to send
24 * stderr and stdout over a single socket.
25 *
26 * For historical reasons this is off during the start of the
27 * connection, but it's switched on quite early using
28 * io_start_multiplex_out() and io_start_multiplex_in(). */
29
30#include "rsync.h"
31#include "ifuncs.h"
32#include "inums.h"
33
34/** If no timeout is specified then use a 60 second select timeout */
35#define SELECT_TIMEOUT 60
36
37extern int bwlimit;
38extern size_t bwlimit_writemax;
39extern int io_timeout;
40extern int am_server;
41extern int am_daemon;
42extern int am_sender;
43extern int am_generator;
44extern int msgs2stderr;
45extern int inc_recurse;
46extern int io_error;
47extern int eol_nulls;
48extern int flist_eof;
49extern int file_total;
50extern int file_old_total;
51extern int list_only;
52extern int read_batch;
53extern int protect_args;
54extern int checksum_seed;
55extern int protocol_version;
56extern int remove_source_files;
57extern int preserve_hard_links;
58extern BOOL extra_flist_sending_enabled;
59extern struct stats stats;
60extern struct file_list *cur_flist;
61#ifdef ICONV_OPTION
62extern int filesfrom_convert;
63extern iconv_t ic_send, ic_recv;
64#endif
65
66int csum_length = SHORT_SUM_LENGTH; /* initial value */
67int allowed_lull = 0;
68int ignore_timeout = 0;
69int batch_fd = -1;
70int msgdone_cnt = 0;
71int forward_flist_data = 0;
72
73/* Ignore an EOF error if non-zero. See whine_about_eof(). */
74int kluge_around_eof = 0;
75
76int sock_f_in = -1;
77int sock_f_out = -1;
78
79int64 total_data_read = 0;
80int64 total_data_written = 0;
81
82static struct {
83 xbuf in, out, msg;
84 int in_fd;
85 int out_fd; /* Both "out" and "msg" go to this fd. */
86 BOOL in_multiplexed;
87 unsigned out_empty_len;
88 size_t raw_data_header_pos; /* in the out xbuf */
89 size_t raw_flushing_ends_before; /* in the out xbuf */
90 size_t raw_input_ends_before; /* in the in xbuf */
91} iobuf = { .in_fd = -1, .out_fd = -1 };
92
93static time_t last_io_in;
94static time_t last_io_out;
95
96static int write_batch_monitor_in = -1;
97static int write_batch_monitor_out = -1;
98
99static int ff_forward_fd = -1;
100static int ff_reenable_multiplex = -1;
101static char ff_lastchar = '\0';
102static xbuf ff_xb = EMPTY_XBUF;
103#ifdef ICONV_OPTION
104static xbuf iconv_buf = EMPTY_XBUF;
105#endif
106static int select_timeout = SELECT_TIMEOUT;
107static int active_filecnt = 0;
108static OFF_T active_bytecnt = 0;
109static int first_message = 1;
110
111static char int_byte_extra[64] = {
112 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (00 - 3F)/4 */
113 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* (40 - 7F)/4 */
114 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* (80 - BF)/4 */
115 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, /* (C0 - FF)/4 */
116};
117
118#define IN_MULTIPLEXED (iobuf.in_multiplexed)
119#define OUT_MULTIPLEXED (iobuf.out_empty_len != 0)
120
121#define PIO_NEED_INPUT (1<<0) /* The *_NEED_* flags are mutually exclusive. */
122#define PIO_NEED_OUTROOM (1<<1)
123#define PIO_NEED_MSGROOM (1<<2)
124
125#define PIO_CONSUME_INPUT (1<<4) /* Must becombined with PIO_NEED_INPUT. */
126
127#define PIO_INPUT_AND_CONSUME (PIO_NEED_INPUT | PIO_CONSUME_INPUT)
128#define PIO_NEED_FLAGS (PIO_NEED_INPUT | PIO_NEED_OUTROOM | PIO_NEED_MSGROOM)
129
130#define REMOTE_OPTION_ERROR "rsync: on remote machine: -"
131#define REMOTE_OPTION_ERROR2 ": unknown option"
132
133#define FILESFROM_BUFLEN 2048
134
135enum festatus { FES_SUCCESS, FES_REDO, FES_NO_SEND };
136
137static flist_ndx_list redo_list, hlink_list;
138
139static void sleep_for_bwlimit(int bytes_written);
140
141static void check_timeout(void)
142{
143 time_t t;
144
145 if (!io_timeout || ignore_timeout)
146 return;
147
148 if (!last_io_in) {
149 last_io_in = time(NULL);
150 return;
151 }
152
153 t = time(NULL);
154
155 if (t - last_io_in >= io_timeout) {
156 if (!am_server && !am_daemon) {
157 rprintf(FERROR, "io timeout after %d seconds -- exiting\n",
158 (int)(t-last_io_in));
159 }
160 exit_cleanup(RERR_TIMEOUT);
161 }
162}
163
164/* It's almost always an error to get an EOF when we're trying to read from the
165 * network, because the protocol is (for the most part) self-terminating.
166 *
167 * There is one case for the receiver when it is at the end of the transfer
168 * (hanging around reading any keep-alive packets that might come its way): if
169 * the sender dies before the generator's kill-signal comes through, we can end
170 * up here needing to loop until the kill-signal arrives. In this situation,
171 * kluge_around_eof will be < 0.
172 *
173 * There is another case for older protocol versions (< 24) where the module
174 * listing was not terminated, so we must ignore an EOF error in that case and
175 * exit. In this situation, kluge_around_eof will be > 0. */
176static NORETURN void whine_about_eof(int fd)
177{
178 if (kluge_around_eof && fd == sock_f_in) {
179 int i;
180 if (kluge_around_eof > 0)
181 exit_cleanup(0);
182 /* If we're still here after 10 seconds, exit with an error. */
183 for (i = 10*1000/20; i--; )
184 msleep(20);
185 }
186
187 rprintf(FERROR, RSYNC_NAME ": connection unexpectedly closed "
188 "(%s bytes received so far) [%s]\n",
189 big_num(stats.total_read), who_am_i());
190
191 exit_cleanup(RERR_STREAMIO);
192}
193
194/* Do a safe read, handling any needed looping and error handling.
195 * Returns the count of the bytes read, which will only be different
196 * from "len" if we encountered an EOF. This routine is not used on
197 * the socket except very early in the transfer. */
198static size_t safe_read(int fd, char *buf, size_t len)
199{
200 size_t got;
201 int n;
202
203 assert(fd != iobuf.in_fd);
204
205 n = read(fd, buf, len);
206 if ((size_t)n == len || n == 0) {
207 if (DEBUG_GTE(IO, 2))
208 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
209 return n;
210 }
211 if (n < 0) {
212 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
213 read_failed:
214 rsyserr(FERROR, errno, "safe_read failed to read %ld bytes [%s]",
215 (long)len, who_am_i());
216 exit_cleanup(RERR_STREAMIO);
217 }
218 got = 0;
219 } else
220 got = n;
221
222 while (1) {
223 struct timeval tv;
224 fd_set r_fds, e_fds;
225 int cnt;
226
227 FD_ZERO(&r_fds);
228 FD_SET(fd, &r_fds);
229 FD_ZERO(&e_fds);
230 FD_SET(fd, &e_fds);
231 tv.tv_sec = select_timeout;
232 tv.tv_usec = 0;
233
234 cnt = select(fd+1, &r_fds, NULL, &e_fds, &tv);
235 if (cnt <= 0) {
236 if (cnt < 0 && errno == EBADF) {
237 rsyserr(FERROR, errno, "safe_read select failed [%s]",
238 who_am_i());
239 exit_cleanup(RERR_FILEIO);
240 }
241 check_timeout();
242 continue;
243 }
244
245 /*if (FD_ISSET(fd, &e_fds))
246 rprintf(FINFO, "select exception on fd %d\n", fd); */
247
248 if (FD_ISSET(fd, &r_fds)) {
249 n = read(fd, buf + got, len - got);
250 if (DEBUG_GTE(IO, 2))
251 rprintf(FINFO, "[%s] safe_read(%d)=%ld\n", who_am_i(), fd, (long)n);
252 if (n == 0)
253 break;
254 if (n < 0) {
255 if (errno == EINTR)
256 continue;
257 goto read_failed;
258 }
259 if ((got += (size_t)n) == len)
260 break;
261 }
262 }
263
264 return got;
265}
266
267static const char *what_fd_is(int fd)
268{
269 static char buf[20];
270
271 if (fd == sock_f_out)
272 return "socket";
273 else if (fd == iobuf.out_fd)
274 return "message fd";
275 else if (fd == batch_fd)
276 return "batch file";
277 else {
278 snprintf(buf, sizeof buf, "fd %d", fd);
279 return buf;
280 }
281}
282
283/* Do a safe write, handling any needed looping and error handling.
284 * Returns only if everything was successfully written. This routine
285 * is not used on the socket except very early in the transfer. */
286static void safe_write(int fd, const char *buf, size_t len)
287{
288 int n;
289
290 assert(fd != iobuf.out_fd);
291
292 n = write(fd, buf, len);
293 if ((size_t)n == len)
294 return;
295 if (n < 0) {
296 if (errno != EINTR && errno != EWOULDBLOCK && errno != EAGAIN) {
297 write_failed:
298 rsyserr(FERROR, errno,
299 "safe_write failed to write %ld bytes to %s [%s]",
300 (long)len, what_fd_is(fd), who_am_i());
301 exit_cleanup(RERR_STREAMIO);
302 }
303 } else {
304 buf += n;
305 len -= n;
306 }
307
308 while (len) {
309 struct timeval tv;
310 fd_set w_fds;
311 int cnt;
312
313 FD_ZERO(&w_fds);
314 FD_SET(fd, &w_fds);
315 tv.tv_sec = select_timeout;
316 tv.tv_usec = 0;
317
318 cnt = select(fd + 1, NULL, &w_fds, NULL, &tv);
319 if (cnt <= 0) {
320 if (cnt < 0 && errno == EBADF) {
321 rsyserr(FERROR, errno, "safe_write select failed on %s [%s]",
322 what_fd_is(fd), who_am_i());
323 exit_cleanup(RERR_FILEIO);
324 }
325 check_timeout();
326 continue;
327 }
328
329 if (FD_ISSET(fd, &w_fds)) {
330 n = write(fd, buf, len);
331 if (n < 0) {
332 if (errno == EINTR)
333 continue;
334 goto write_failed;
335 }
336 buf += n;
337 len -= n;
338 }
339 }
340}
341
342/* This is only called when files-from data is known to be available. We read
343 * a chunk of data and put it into the output buffer. */
344static void forward_filesfrom_data(void)
345{
346 int len;
347
348 len = read(ff_forward_fd, ff_xb.buf + ff_xb.len, ff_xb.size - ff_xb.len);
349 if (len <= 0) {
350 if (len == 0 || errno != EINTR) {
351 /* Send end-of-file marker */
352 ff_forward_fd = -1;
353 write_buf(iobuf.out_fd, "\0\0", ff_lastchar ? 2 : 1);
354 free_xbuf(&ff_xb);
355 if (ff_reenable_multiplex >= 0)
356 io_start_multiplex_out(ff_reenable_multiplex);
357 }
358 return;
359 }
360
361 if (DEBUG_GTE(IO, 2))
362 rprintf(FINFO, "[%s] files-from read=%ld\n", who_am_i(), (long)len);
363
364#ifdef ICONV_OPTION
365 len += ff_xb.len;
366#endif
367
368 if (!eol_nulls) {
369 char *s = ff_xb.buf + len;
370 /* Transform CR and/or LF into '\0' */
371 while (s-- > ff_xb.buf) {
372 if (*s == '\n' || *s == '\r')
373 *s = '\0';
374 }
375 }
376
377 if (ff_lastchar)
378 ff_xb.pos = 0;
379 else {
380 char *s = ff_xb.buf;
381 /* Last buf ended with a '\0', so don't let this buf start with one. */
382 while (len && *s == '\0')
383 s++, len--;
384 ff_xb.pos = s - ff_xb.buf;
385 }
386
387#ifdef ICONV_OPTION
388 if (filesfrom_convert && len) {
389 char *sob = ff_xb.buf + ff_xb.pos, *s = sob;
390 char *eob = sob + len;
391 int flags = ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT;
392 if (ff_lastchar == '\0')
393 flags |= ICB_INIT;
394 /* Convert/send each null-terminated string separately, skipping empties. */
395 while (s != eob) {
396 if (*s++ == '\0') {
397 ff_xb.len = s - sob - 1;
398 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0)
399 exit_cleanup(RERR_PROTOCOL); /* impossible? */
400 write_buf(iobuf.out_fd, s-1, 1); /* Send the '\0'. */
401 while (s != eob && *s == '\0')
402 s++;
403 sob = s;
404 ff_xb.pos = sob - ff_xb.buf;
405 flags |= ICB_INIT;
406 }
407 }
408
409 if ((ff_xb.len = s - sob) == 0)
410 ff_lastchar = '\0';
411 else {
412 /* Handle a partial string specially, saving any incomplete chars. */
413 flags &= ~ICB_INCLUDE_INCOMPLETE;
414 if (iconvbufs(ic_send, &ff_xb, &iobuf.out, flags) < 0) {
415 if (errno == E2BIG)
416 exit_cleanup(RERR_PROTOCOL); /* impossible? */
417 if (ff_xb.pos)
418 memmove(ff_xb.buf, ff_xb.buf + ff_xb.pos, ff_xb.len);
419 }
420 ff_lastchar = 'x'; /* Anything non-zero. */
421 }
422 } else
423#endif
424
425 if (len) {
426 char *f = ff_xb.buf + ff_xb.pos;
427 char *t = ff_xb.buf;
428 char *eob = f + len;
429 /* Eliminate any multi-'\0' runs. */
430 while (f != eob) {
431 if (!(*t++ = *f++)) {
432 while (f != eob && *f == '\0')
433 f++;
434 }
435 }
436 ff_lastchar = f[-1];
437 if ((len = t - ff_xb.buf) != 0) {
438 /* This will not circle back to perform_io() because we only get
439 * called when there is plenty of room in the output buffer. */
440 write_buf(iobuf.out_fd, ff_xb.buf, len);
441 }
442 }
443}
444
445/* Perform buffered input and output until specified conditions are met. When
446 * given a "needed" read requirement, we'll return without doing any I/O if the
447 * iobuf.in bytes are already available. When reading, we'll read as many
448 * bytes as we can into the buffer, and return as soon as we meet the minimum
449 * read requirement. When given a "needed" write requirement, we'll return
450 * without doing any I/O if that many bytes will fit in the output buffer (we
451 * check either iobuf.out or iobuf.msg, depending on the flags). When writing,
452 * we write out as much as we can, and return as soon as the given free-space
453 * requirement is available.
454 *
455 * The iobuf.out and iobuf.msg buffers are circular, so some writes into them
456 * will need to be split when the data needs to wrap around to the start. In
457 * order to help make this easier for some operations (such as the use of
458 * SIVAL() into the buffer) the buffers MUST have 4 bytes of overflow space at
459 * the end that is not not counted in the "size". The iobuf.in buffer is not
460 * (currently) circular. To facilitate the handling of MSG_DATA bytes as they
461 * are read-from/written-into the buffers, see the three raw_* iobuf vars.
462 *
463 * When writing, we flush data in the following priority order:
464 *
465 * 1. Finish writing any in-progress MSG_DATA sequence from iobuf.out.
466 *
467 * 2. Write out all the messages from the message buf (if iobuf.msg is active).
468 * Yes, this means that a PIO_NEED_OUTROOM call will completely flush any
469 * messages before getting to the iobuf.out flushing (except for rule 1).
470 *
471 * 3. Write out the raw data from iobuf.out, possibly filling in the multiplexed
472 * MSG_DATA header that was pre-allocated (when output is multiplexed).
473 *
474 * TODO: items for possible future work:
475 *
476 * - Make this routine able to read the generator-to-receiver batch flow?
477 *
478 * - Make the input buffer circular?
479 *
480 * Unlike the old routines that this replaces, it is OK to read ahead as far as
481 * we can because the read_a_msg() routine now reads its bytes out of the input
482 * buffer. In the old days, only raw data was in the input buffer, and any
483 * unused raw data in the buf would prevent the reading of socket data. */
484static char *perform_io(size_t needed, int flags)
485{
486 fd_set r_fds, e_fds, w_fds;
487 struct timeval tv;
488 int cnt, max_fd;
489 size_t empty_buf_len = 0;
490 xbuf *out;
491 char *data;
492
493 if (iobuf.in.len == 0 && iobuf.in.pos != 0) {
494 if (iobuf.raw_input_ends_before)
495 iobuf.raw_input_ends_before -= iobuf.in.pos;
496 iobuf.in.pos = 0;
497 }
498
499 switch (flags & PIO_NEED_FLAGS) {
500 case PIO_NEED_INPUT:
501 if (DEBUG_GTE(IO, 3)) {
502 rprintf(FINFO, "[%s] perform_io(%ld, %sinput)\n",
503 who_am_i(), (long)needed, flags & PIO_CONSUME_INPUT ? "consume&" : "");
504 }
505
506 /* Make sure the input buffer is big enough to hold "needed" bytes.
507 * Also make sure it will fit in the free space at the end, or
508 * else we need to shift some bytes. */
509 if (needed && iobuf.in.size < needed) {
510 if (!(iobuf.in.buf = realloc_array(iobuf.in.buf, char, needed)))
511 out_of_memory("perform_io");
512 if (DEBUG_GTE(IO, 4)) {
513 rprintf(FINFO, "[%s] resized input buffer from %ld to %ld bytes.\n",
514 who_am_i(), (long)iobuf.in.size, (long)needed);
515 }
516 iobuf.in.size = needed;
517 }
518 if (iobuf.in.size - iobuf.in.pos < needed
519 || (iobuf.in.len < needed && iobuf.in.len < 1024
520 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len) < 1024)) {
521 memmove(iobuf.in.buf, iobuf.in.buf + iobuf.in.pos, iobuf.in.len);
522 if (DEBUG_GTE(IO, 4)) {
523 rprintf(FINFO,
524 "[%s] moved %ld bytes from %ld to 0 in the input buffer (size=%ld, needed=%ld).\n",
525 who_am_i(), (long)iobuf.in.len, (long)iobuf.in.pos, (long)iobuf.in.size, (long)needed);
526 }
527 if (iobuf.raw_input_ends_before)
528 iobuf.raw_input_ends_before -= iobuf.in.pos;
529 iobuf.in.pos = 0;
530 }
531 break;
532
533 case PIO_NEED_OUTROOM:
534 /* We never resize the circular output buffer. */
535 if (iobuf.out.size - iobuf.out_empty_len < needed) {
536 fprintf(stderr, "need to write %ld bytes, iobuf.out.buf is only %ld bytes.\n",
537 (long)needed, (long)(iobuf.out.size - iobuf.out_empty_len));
538 exit_cleanup(RERR_PROTOCOL);
539 }
540
541 if (DEBUG_GTE(IO, 3)) {
542 rprintf(FINFO, "[%s] perform_io(%ld, outroom) needs to flush %ld\n",
543 who_am_i(), (long)needed,
544 iobuf.out.len > iobuf.out.size - needed
545 ? (long)iobuf.out.len - (iobuf.out.size - needed) : 0L);
546 }
547 break;
548
549 case PIO_NEED_MSGROOM:
550 /* We never resize the circular message buffer. */
551 if (iobuf.msg.size < needed) {
552 fprintf(stderr, "need to write %ld bytes, iobuf.msg.buf is only %ld bytes.\n",
553 (long)needed, (long)iobuf.msg.size);
554 exit_cleanup(RERR_PROTOCOL);
555 }
556
557 if (DEBUG_GTE(IO, 3)) {
558 rprintf(FINFO, "[%s] perform_io(%ld, msgroom) needs to flush %ld\n",
559 who_am_i(), (long)needed,
560 iobuf.out.len > iobuf.msg.size - needed
561 ? (long)iobuf.out.len - (iobuf.msg.size - needed) : 0L);
562 }
563 break;
564
565 case 0:
566 if (DEBUG_GTE(IO, 3))
567 rprintf(FINFO, "[%s] perform_io(%ld, %d)\n", who_am_i(), (long)needed, flags);
568 break;
569
570 default:
571 exit_cleanup(RERR_UNSUPPORTED);
572 }
573
574 while (1) {
575 switch (flags & PIO_NEED_FLAGS) {
576 case PIO_NEED_INPUT:
577 if (iobuf.in.len >= needed)
578 goto double_break;
579 break;
580 case PIO_NEED_OUTROOM:
581 if (iobuf.out.len <= iobuf.out.size - needed)
582 goto double_break;
583 break;
584 case PIO_NEED_MSGROOM:
585 if (iobuf.msg.len <= iobuf.msg.size - needed)
586 goto double_break;
587 break;
588 }
589
590 max_fd = -1;
591
592 FD_ZERO(&r_fds);
593 FD_ZERO(&e_fds);
594 if (iobuf.in_fd >= 0 && iobuf.in.size - (iobuf.in.pos + iobuf.in.len)) {
595 if (!read_batch || batch_fd >= 0) {
596 FD_SET(iobuf.in_fd, &r_fds);
597 FD_SET(iobuf.in_fd, &e_fds);
598 }
599 if (iobuf.in_fd > max_fd)
600 max_fd = iobuf.in_fd;
601 }
602
603 /* Only do more filesfrom processing if there is enough room in the out buffer. */
604 if (ff_forward_fd >= 0 && iobuf.out.size - iobuf.out.len > FILESFROM_BUFLEN*2) {
605 FD_SET(ff_forward_fd, &r_fds);
606 if (ff_forward_fd > max_fd)
607 max_fd = ff_forward_fd;
608 }
609
610 FD_ZERO(&w_fds);
611 if (iobuf.out_fd >= 0) {
612 if (iobuf.raw_flushing_ends_before
613 || (!iobuf.msg.len && iobuf.out.len > iobuf.out_empty_len && !(flags & PIO_NEED_MSGROOM))) {
614 if (OUT_MULTIPLEXED && !iobuf.raw_flushing_ends_before) {
615 size_t val;
616
617 /* The iobuf.raw_flushing_ends_before value can point off the end
618 * of the iobuf.out buffer for a while, for easier subtracting. */
619 iobuf.raw_flushing_ends_before = iobuf.out.pos + iobuf.out.len;
620
621 SIVAL(iobuf.out.buf + iobuf.raw_data_header_pos, 0,
622 ((MPLEX_BASE + (int)MSG_DATA)<<24) + iobuf.out.len - 4);
623 if ((val = iobuf.out.size - iobuf.raw_data_header_pos) < 4) {
624 /* We used some of the overflow bytes, so move them. */
625 if (DEBUG_GTE(IO, 4)) {
626 rprintf(FINFO, "[%s] wrap-bytes moved: %d (perform_io)\n",
627 who_am_i(), (int)val);
628 }
629 memcpy(iobuf.out.buf, iobuf.out.buf + iobuf.out.size, 4 - val);
630 }
631
632 if (DEBUG_GTE(IO, 1)) {
633 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n",
634 who_am_i(), (int)MSG_DATA, (long)iobuf.out.len - 4);
635 }
636
637 /* reserve room for the next MSG_DATA header */
638 iobuf.raw_data_header_pos = iobuf.raw_flushing_ends_before;
639 if (iobuf.raw_data_header_pos >= iobuf.out.size)
640 iobuf.raw_data_header_pos -= iobuf.out.size;
641 iobuf.out.len += 4;
642 }
643
644 empty_buf_len = iobuf.out_empty_len;
645 out = &iobuf.out;
646 } else if (iobuf.msg.len) {
647 empty_buf_len = 0;
648 out = &iobuf.msg;
649 } else
650 out = NULL;
651 if (out) {
652 FD_SET(iobuf.out_fd, &w_fds);
653 if (iobuf.out_fd > max_fd)
654 max_fd = iobuf.out_fd;
655 }
656 } else
657 out = NULL;
658
659 if (max_fd < 0) {
660 switch (flags & PIO_NEED_FLAGS) {
661 case PIO_NEED_INPUT:
662 rprintf(FERROR, "error in perform_io: no fd for input.\n");
663 exit_cleanup(RERR_PROTOCOL);
664 case PIO_NEED_OUTROOM:
665 case PIO_NEED_MSGROOM:
666 msgs2stderr = 1;
667 rprintf(FERROR, "error in perform_io: no fd for output.\n");
668 exit_cleanup(RERR_PROTOCOL);
669 default:
670 /* No stated needs, so I guess this is OK. */
671 break;
672 }
673 break;
674 }
675
676 if (extra_flist_sending_enabled) {
677 if (file_total - file_old_total < MAX_FILECNT_LOOKAHEAD
678 && file_total - file_old_total >= MIN_FILECNT_LOOKAHEAD)
679 tv.tv_sec = 0;
680 else {
681 extra_flist_sending_enabled = False;
682 tv.tv_sec = select_timeout;
683 }
684 } else
685 tv.tv_sec = select_timeout;
686 tv.tv_usec = 0;
687
688 cnt = select(max_fd + 1, &r_fds, &w_fds, &e_fds, &tv);
689
690 if (cnt <= 0) {
691 if (cnt < 0 && errno == EBADF) {
692 msgs2stderr = 1;
693 exit_cleanup(RERR_SOCKETIO);
694 }
695 if (extra_flist_sending_enabled) {
696 extra_flist_sending_enabled = False;
697 send_extra_file_list(sock_f_out, -1);
698 extra_flist_sending_enabled = !flist_eof;
699 } else
700 check_timeout();
701 FD_ZERO(&r_fds); /* Just in case... */
702 FD_ZERO(&w_fds);
703 }
704
705 if (iobuf.in_fd >= 0 && FD_ISSET(iobuf.in_fd, &r_fds)) {
706 size_t pos = iobuf.in.pos + iobuf.in.len;
707 size_t len = iobuf.in.size - pos;
708 int n;
709 if ((n = read(iobuf.in_fd, iobuf.in.buf + pos, len)) <= 0) {
710 if (n == 0) {
711 if (!read_batch || batch_fd < 0 || am_generator)
712 whine_about_eof(iobuf.in_fd); /* Doesn't return. */
713 batch_fd = -1;
714 continue;
715 }
716 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
717 n = 0;
718 else {
719 /* Don't write errors on a dead socket. */
720 if (iobuf.in_fd == sock_f_in) {
721 if (am_sender)
722 msgs2stderr = 1;
723 rsyserr(FERROR_SOCKET, errno, "read error");
724 } else
725 rsyserr(FERROR, errno, "read error");
726 exit_cleanup(RERR_STREAMIO);
727 }
728 }
729 if (msgs2stderr && DEBUG_GTE(IO, 2))
730 rprintf(FINFO, "[%s] recv=%ld\n", who_am_i(), (long)n);
731
732 if (io_timeout)
733 last_io_in = time(NULL);
734 stats.total_read += n;
735
736 iobuf.in.len += n;
737 }
738
739 if (iobuf.out_fd >= 0 && FD_ISSET(iobuf.out_fd, &w_fds)) {
740 size_t len = iobuf.raw_flushing_ends_before ? iobuf.raw_flushing_ends_before - out->pos : out->len;
741 int n;
742
743 if (bwlimit_writemax && len > bwlimit_writemax)
744 len = bwlimit_writemax;
745
746 if (out->pos + len > out->size)
747 len = out->size - out->pos;
748 if ((n = write(iobuf.out_fd, out->buf + out->pos, len)) <= 0) {
749 if (errno == EINTR || errno == EWOULDBLOCK || errno == EAGAIN)
750 n = 0;
751 else {
752 /* Don't write errors on a dead socket. */
753 msgs2stderr = 1;
754 out->len = iobuf.raw_flushing_ends_before = out->pos = 0;
755 rsyserr(FERROR_SOCKET, errno, "write error");
756 exit_cleanup(RERR_STREAMIO);
757 }
758 }
759 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
760 rprintf(FINFO, "[%s] %s sent=%ld\n",
761 who_am_i(), out == &iobuf.out ? "out" : "msg", (long)n);
762 }
763
764 if (io_timeout)
765 last_io_out = time(NULL);
766 stats.total_written += n;
767
768 if (bwlimit_writemax)
769 sleep_for_bwlimit(n);
770
771 if ((out->pos += n) == out->size) {
772 if (iobuf.raw_flushing_ends_before)
773 iobuf.raw_flushing_ends_before -= out->size;
774 out->pos = 0;
775 }
776 if (out->pos == iobuf.raw_flushing_ends_before)
777 iobuf.raw_flushing_ends_before = 0;
778 if ((out->len -= n) == empty_buf_len) {
779 out->pos = 0;
780 if (empty_buf_len)
781 iobuf.raw_data_header_pos = 0;
782 }
783 }
784
785 if (ff_forward_fd >= 0 && FD_ISSET(ff_forward_fd, &r_fds)) {
786 /* This can potentially flush all output and enable
787 * multiplexed output, so keep this last in the loop
788 * and be sure to not cache anything that would break
789 * such a change. */
790 forward_filesfrom_data();
791 }
792 }
793 double_break:
794
795 data = iobuf.in.buf + iobuf.in.pos;
796
797 if (flags & PIO_CONSUME_INPUT) {
798 iobuf.in.len -= needed;
799 iobuf.in.pos += needed;
800 }
801
802 return data;
803}
804
805/* Buffer a message for the multiplexed output stream. Is never used for MSG_DATA. */
806int send_msg(enum msgcode code, const char *buf, size_t len, int convert)
807{
808 char *hdr;
809 size_t pos;
810 BOOL want_debug = DEBUG_GTE(IO, 1) && convert >= 0 && (msgs2stderr || code != MSG_INFO);
811
812 if (!OUT_MULTIPLEXED)
813 return 0;
814
815 if (want_debug)
816 rprintf(FINFO, "[%s] send_msg(%d, %ld)\n", who_am_i(), (int)code, (long)len);
817
818#ifdef ICONV_OPTION
819 if (convert > 0 && ic_send == (iconv_t)-1)
820 convert = 0;
821 if (convert > 0) {
822 /* Ensuring double-size room leaves space for a potential conversion. */
823 if (iobuf.msg.len + len*2 + 4 > iobuf.msg.size)
824 perform_io(len*2 + 4, PIO_NEED_MSGROOM);
825 } else
826#endif
827 if (iobuf.msg.len + len + 4 > iobuf.msg.size)
828 perform_io(len + 4, PIO_NEED_MSGROOM);
829
830 pos = iobuf.msg.pos + iobuf.msg.len; /* Must be set after any flushing. */
831 if (pos >= iobuf.msg.size)
832 pos -= iobuf.msg.size;
833 hdr = iobuf.msg.buf + pos;
834
835 iobuf.msg.len += 4; /* Leave room for the coming header bytes. */
836
837#ifdef ICONV_OPTION
838 if (convert > 0) {
839 xbuf inbuf;
840
841 INIT_XBUF(inbuf, (char*)buf, len, (size_t)-1);
842
843 len = iobuf.msg.len;
844 iconvbufs(ic_send, &inbuf, &iobuf.msg,
845 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_CIRCULAR_OUT | ICB_INIT);
846 if (inbuf.len > 0) {
847 rprintf(FERROR, "overflowed iobuf.msg buffer in send_msg");
848 exit_cleanup(RERR_UNSUPPORTED);
849 }
850 len = iobuf.msg.len - len;
851 } else
852#endif
853 {
854 size_t siz;
855
856 if ((pos += 4) >= iobuf.msg.size)
857 pos -= iobuf.msg.size;
858
859 /* Handle a split copy if we wrap around the end of the circular buffer. */
860 if (pos >= iobuf.msg.pos && (siz = iobuf.msg.size - pos) < len) {
861 memcpy(iobuf.msg.buf + pos, buf, siz);
862 memcpy(iobuf.msg.buf, buf + siz, len - siz);
863 } else
864 memcpy(iobuf.msg.buf + pos, buf, len);
865
866 iobuf.msg.len += len;
867 }
868
869 SIVAL(hdr, 0, ((MPLEX_BASE + (int)code)<<24) + len);
870 /* If the header used any overflow bytes, move them to the start. */
871 if ((pos = hdr+4 - iobuf.msg.buf) > iobuf.msg.size) {
872 size_t siz = pos - iobuf.msg.size;
873 if (DEBUG_GTE(IO, 4))
874 rprintf(FINFO, "[%s] wrap-bytes moved: %d (send_msg)\n", who_am_i(), (int)siz);
875 memcpy(iobuf.msg.buf, hdr+4 - siz, siz);
876 }
877
878 if (want_debug && convert > 0)
879 rprintf(FINFO, "[%s] converted msg len=%ld\n", who_am_i(), (long)len);
880
881 return 1;
882}
883
884void send_msg_int(enum msgcode code, int num)
885{
886 char numbuf[4];
887
888 if (DEBUG_GTE(IO, 1))
889 rprintf(FINFO, "[%s] send_msg_int(%d, %d)\n", who_am_i(), (int)code, num);
890
891 SIVAL(numbuf, 0, num);
892 send_msg(code, numbuf, 4, -1);
893}
894
895static void got_flist_entry_status(enum festatus status, int ndx)
896{
897 struct file_list *flist = flist_for_ndx(ndx, "got_flist_entry_status");
898
899 if (remove_source_files) {
900 active_filecnt--;
901 active_bytecnt -= F_LENGTH(flist->files[ndx - flist->ndx_start]);
902 }
903
904 if (inc_recurse)
905 flist->in_progress--;
906
907 switch (status) {
908 case FES_SUCCESS:
909 if (remove_source_files)
910 send_msg_int(MSG_SUCCESS, ndx);
911 if (preserve_hard_links) {
912 struct file_struct *file = flist->files[ndx - flist->ndx_start];
913 if (F_IS_HLINKED(file)) {
914 flist_ndx_push(&hlink_list, ndx);
915 flist->in_progress++;
916 }
917 }
918 break;
919 case FES_REDO:
920 if (read_batch) {
921 if (inc_recurse)
922 flist->in_progress++;
923 break;
924 }
925 if (inc_recurse)
926 flist->to_redo++;
927 flist_ndx_push(&redo_list, ndx);
928 break;
929 case FES_NO_SEND:
930 break;
931 }
932}
933
934/* Note the fds used for the main socket (which might really be a pipe
935 * for a local transfer, but we can ignore that). */
936void io_set_sock_fds(int f_in, int f_out)
937{
938 sock_f_in = f_in;
939 sock_f_out = f_out;
940}
941
942void set_io_timeout(int secs)
943{
944 io_timeout = secs;
945
946 if (!io_timeout || io_timeout > SELECT_TIMEOUT)
947 select_timeout = SELECT_TIMEOUT;
948 else
949 select_timeout = io_timeout;
950
951 allowed_lull = read_batch ? 0 : (io_timeout + 1) / 2;
952}
953
954static void check_for_d_option_error(const char *msg)
955{
956 static char rsync263_opts[] = "BCDHIKLPRSTWabceghlnopqrtuvxz";
957 char *colon;
958 int saw_d = 0;
959
960 if (*msg != 'r'
961 || strncmp(msg, REMOTE_OPTION_ERROR, sizeof REMOTE_OPTION_ERROR - 1) != 0)
962 return;
963
964 msg += sizeof REMOTE_OPTION_ERROR - 1;
965 if (*msg == '-' || (colon = strchr(msg, ':')) == NULL
966 || strncmp(colon, REMOTE_OPTION_ERROR2, sizeof REMOTE_OPTION_ERROR2 - 1) != 0)
967 return;
968
969 for ( ; *msg != ':'; msg++) {
970 if (*msg == 'd')
971 saw_d = 1;
972 else if (*msg == 'e')
973 break;
974 else if (strchr(rsync263_opts, *msg) == NULL)
975 return;
976 }
977
978 if (saw_d) {
979 rprintf(FWARNING,
980 "*** Try using \"--old-d\" if remote rsync is <= 2.6.3 ***\n");
981 }
982}
983
984/* This is used by the generator to limit how many file transfers can
985 * be active at once when --remove-source-files is specified. Without
986 * this, sender-side deletions were mostly happening at the end. */
987void increment_active_files(int ndx, int itemizing, enum logcode code)
988{
989 while (1) {
990 /* TODO: tune these limits? */
991 int limit = active_bytecnt >= 128*1024 ? 10 : 50;
992 if (active_filecnt < limit)
993 break;
994 check_for_finished_files(itemizing, code, 0);
995 if (active_filecnt < limit)
996 break;
997 wait_for_receiver();
998 }
999
1000 active_filecnt++;
1001 active_bytecnt += F_LENGTH(cur_flist->files[ndx - cur_flist->ndx_start]);
1002}
1003
1004int get_redo_num(void)
1005{
1006 return flist_ndx_pop(&redo_list);
1007}
1008
1009int get_hlink_num(void)
1010{
1011 return flist_ndx_pop(&hlink_list);
1012}
1013
1014/* When we're the receiver and we have a local --files-from list of names
1015 * that needs to be sent over the socket to the sender, we have to do two
1016 * things at the same time: send the sender a list of what files we're
1017 * processing and read the incoming file+info list from the sender. We do
1018 * this by making recv_file_list() call forward_filesfrom_data(), which
1019 * will ensure that we forward data to the sender until we get some data
1020 * for recv_file_list() to use. */
1021void start_filesfrom_forwarding(int fd)
1022{
1023 if (protocol_version < 31 && OUT_MULTIPLEXED) {
1024 /* Older protocols send the files-from data w/o packaging
1025 * it in multiplexed I/O packets, so temporarily switch
1026 * to buffered I/O to match this behavior. */
1027 iobuf.msg.pos = iobuf.msg.len = 0; /* Be extra sure no messages go out. */
1028 ff_reenable_multiplex = io_end_multiplex_out(MPLX_TO_BUFFERED);
1029 }
1030 ff_forward_fd = fd;
1031
1032 alloc_xbuf(&ff_xb, FILESFROM_BUFLEN);
1033}
1034
1035/* Read a line into the "buf" buffer. */
1036int read_line(int fd, char *buf, size_t bufsiz, int flags)
1037{
1038 char ch, *s, *eob;
1039
1040#ifdef ICONV_OPTION
1041 if (flags & RL_CONVERT && iconv_buf.size < bufsiz)
1042 realloc_xbuf(&iconv_buf, bufsiz + 1024);
1043#endif
1044
1045 start:
1046#ifdef ICONV_OPTION
1047 s = flags & RL_CONVERT ? iconv_buf.buf : buf;
1048#else
1049 s = buf;
1050#endif
1051 eob = s + bufsiz - 1;
1052 while (1) {
1053 /* We avoid read_byte() for files because files can return an EOF. */
1054 if (fd == iobuf.in_fd)
1055 ch = read_byte(fd);
1056 else if (safe_read(fd, &ch, 1) == 0)
1057 break;
1058 if (flags & RL_EOL_NULLS ? ch == '\0' : (ch == '\r' || ch == '\n')) {
1059 /* Skip empty lines if dumping comments. */
1060 if (flags & RL_DUMP_COMMENTS && s == buf)
1061 continue;
1062 break;
1063 }
1064 if (s < eob)
1065 *s++ = ch;
1066 }
1067 *s = '\0';
1068
1069 if (flags & RL_DUMP_COMMENTS && (*buf == '#' || *buf == ';'))
1070 goto start;
1071
1072#ifdef ICONV_OPTION
1073 if (flags & RL_CONVERT) {
1074 xbuf outbuf;
1075 INIT_XBUF(outbuf, buf, 0, bufsiz);
1076 iconv_buf.pos = 0;
1077 iconv_buf.len = s - iconv_buf.buf;
1078 iconvbufs(ic_recv, &iconv_buf, &outbuf,
1079 ICB_INCLUDE_BAD | ICB_INCLUDE_INCOMPLETE | ICB_INIT);
1080 outbuf.buf[outbuf.len] = '\0';
1081 return outbuf.len;
1082 }
1083#endif
1084
1085 return s - buf;
1086}
1087
1088void read_args(int f_in, char *mod_name, char *buf, size_t bufsiz, int rl_nulls,
1089 char ***argv_p, int *argc_p, char **request_p)
1090{
1091 int maxargs = MAX_ARGS;
1092 int dot_pos = 0;
1093 int argc = 0;
1094 char **argv, *p;
1095 int rl_flags = (rl_nulls ? RL_EOL_NULLS : 0);
1096
1097#ifdef ICONV_OPTION
1098 rl_flags |= (protect_args && ic_recv != (iconv_t)-1 ? RL_CONVERT : 0);
1099#endif
1100
1101 if (!(argv = new_array(char *, maxargs)))
1102 out_of_memory("read_args");
1103 if (mod_name && !protect_args)
1104 argv[argc++] = "rsyncd";
1105
1106 while (1) {
1107 if (read_line(f_in, buf, bufsiz, rl_flags) == 0)
1108 break;
1109
1110 if (argc == maxargs-1) {
1111 maxargs += MAX_ARGS;
1112 if (!(argv = realloc_array(argv, char *, maxargs)))
1113 out_of_memory("read_args");
1114 }
1115
1116 if (dot_pos) {
1117 if (request_p) {
1118 *request_p = strdup(buf);
1119 request_p = NULL;
1120 }
1121 if (mod_name)
1122 glob_expand_module(mod_name, buf, &argv, &argc, &maxargs);
1123 else
1124 glob_expand(buf, &argv, &argc, &maxargs);
1125 } else {
1126 if (!(p = strdup(buf)))
1127 out_of_memory("read_args");
1128 argv[argc++] = p;
1129 if (*p == '.' && p[1] == '\0')
1130 dot_pos = argc;
1131 }
1132 }
1133 argv[argc] = NULL;
1134
1135 glob_expand(NULL, NULL, NULL, NULL);
1136
1137 *argc_p = argc;
1138 *argv_p = argv;
1139}
1140
1141BOOL io_start_buffering_out(int f_out)
1142{
1143 if (msgs2stderr && DEBUG_GTE(IO, 2))
1144 rprintf(FINFO, "[%s] io_start_buffering_out(%d)\n", who_am_i(), f_out);
1145
1146 if (OUT_MULTIPLEXED && !iobuf.msg.buf) {
1147 iobuf.msg.size = IO_BUFFER_SIZE - 4;
1148 if (!(iobuf.msg.buf = new_array(char, iobuf.msg.size + 4)))
1149 out_of_memory("io_start_buffering_out");
1150 iobuf.msg.pos = iobuf.msg.len = 0;
1151 }
1152
1153 if (iobuf.out.buf) {
1154 if (iobuf.out_fd == -1)
1155 iobuf.out_fd = f_out;
1156 assert(f_out == iobuf.out_fd);
1157 return False;
1158 }
1159
1160 iobuf.out.size = IO_BUFFER_SIZE * 2 - 4;
1161 /* The 4 overflow bytes makes some circular-buffer wrapping operations easier. */
1162 if (!(iobuf.out.buf = new_array(char, iobuf.out.size + 4)))
1163 out_of_memory("io_start_buffering_out");
1164 iobuf.out.pos = iobuf.out.len = 0;
1165 iobuf.out_fd = f_out;
1166
1167 return True;
1168}
1169
1170BOOL io_start_buffering_in(int f_in)
1171{
1172 if (msgs2stderr && DEBUG_GTE(IO, 2))
1173 rprintf(FINFO, "[%s] io_start_buffering_in(%d)\n", who_am_i(), f_in);
1174
1175 if (iobuf.in.buf) {
1176 if (iobuf.in_fd == -1)
1177 iobuf.in_fd = f_in;
1178 assert(f_in == iobuf.in_fd);
1179 return False;
1180 }
1181
1182 iobuf.in.size = IO_BUFFER_SIZE;
1183 if (!(iobuf.in.buf = new_array(char, iobuf.in.size)))
1184 out_of_memory("io_start_buffering_in");
1185
1186 iobuf.in.pos = iobuf.in.len = 0;
1187
1188 iobuf.in_fd = f_in;
1189
1190 return True;
1191}
1192
1193void io_end_buffering_in(BOOL free_buffers)
1194{
1195 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1196 rprintf(FINFO, "[%s] io_end_buffering_in(IOBUF_%s_BUFS)\n",
1197 who_am_i(), free_buffers ? "FREE" : "KEEP");
1198 }
1199
1200 if (free_buffers)
1201 free_xbuf(&iobuf.in);
1202 else
1203 iobuf.in.pos = iobuf.in.len = 0;
1204
1205 iobuf.in_fd = -1;
1206}
1207
1208void io_end_buffering_out(BOOL free_buffers)
1209{
1210 if (msgs2stderr && DEBUG_GTE(IO, 2)) {
1211 rprintf(FINFO, "[%s] io_end_buffering_out(IOBUF_%s_BUFS)\n",
1212 who_am_i(), free_buffers ? "FREE" : "KEEP");
1213 }
1214
1215 io_flush(FULL_FLUSH);
1216
1217 if (free_buffers) {
1218 free_xbuf(&iobuf.out);
1219 free_xbuf(&iobuf.msg);
1220 }
1221
1222 iobuf.out_fd = -1;
1223}
1224
1225void maybe_flush_socket(int important)
1226{
1227 if (flist_eof && iobuf.out.buf && iobuf.out.len > iobuf.out_empty_len
1228 && (important || time(NULL) - last_io_out >= 5))
1229 io_flush(NORMAL_FLUSH);
1230}
1231
1232void maybe_send_keepalive(void)
1233{
1234 if (time(NULL) - last_io_out >= allowed_lull) {
1235 if (!iobuf.msg.len && iobuf.out.len == iobuf.out_empty_len) {
1236 if (protocol_version < 29)
1237 return; /* there's nothing we can do */
1238 if (protocol_version >= 30)
1239 send_msg(MSG_NOOP, "", 0, 0);
1240 else {
1241 write_int(iobuf.out_fd, cur_flist->used);
1242 write_shortint(iobuf.out_fd, ITEM_IS_NEW);
1243 }
1244 }
1245 if (iobuf.msg.len)
1246 perform_io(iobuf.msg.size - iobuf.msg.len + 1, PIO_NEED_MSGROOM);
1247 else if (iobuf.out.len > iobuf.out_empty_len)
1248 io_flush(NORMAL_FLUSH);
1249 }
1250}
1251
1252void start_flist_forward(int ndx)
1253{
1254 write_int(iobuf.out_fd, ndx);
1255 forward_flist_data = 1;
1256}
1257
1258void stop_flist_forward(void)
1259{
1260 forward_flist_data = 0;
1261}
1262
1263/* Read a message from a multiplexed source. */
1264static void read_a_msg(void)
1265{
1266 char *data, line[BIGPATHBUFLEN];
1267 int tag, val;
1268 size_t msg_bytes;
1269
1270 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1271 tag = IVAL(data, 0);
1272
1273 msg_bytes = tag & 0xFFFFFF;
1274 tag = (tag >> 24) - MPLEX_BASE;
1275
1276 if (DEBUG_GTE(IO, 1) && (msgs2stderr || tag != MSG_INFO))
1277 rprintf(FINFO, "[%s] got msg=%d, len=%ld\n", who_am_i(), (int)tag, (long)msg_bytes);
1278
1279 switch (tag) {
1280 case MSG_DATA:
1281 assert(iobuf.raw_input_ends_before == 0);
1282 /* Though this does not yet read the data, we do mark where in
1283 * the buffer the msg data will end once it is read. It is
1284 * possible that this points off the end of the buffer, in
1285 * which case the gradual reading of the input stream will
1286 * cause this value to decrease and eventually become real. */
1287 iobuf.raw_input_ends_before = iobuf.in.pos + msg_bytes;
1288 break;
1289 case MSG_STATS:
1290 if (msg_bytes != sizeof stats.total_read || !am_generator)
1291 goto invalid_msg;
1292 data = perform_io(sizeof stats.total_read, PIO_INPUT_AND_CONSUME);
1293 memcpy((char*)&stats.total_read, data, sizeof stats.total_read);
1294 break;
1295 case MSG_REDO:
1296 if (msg_bytes != 4 || !am_generator)
1297 goto invalid_msg;
1298 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1299 got_flist_entry_status(FES_REDO, IVAL(data, 0));
1300 break;
1301 case MSG_IO_ERROR:
1302 if (msg_bytes != 4 || am_sender)
1303 goto invalid_msg;
1304 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1305 io_error |= IVAL(data, 0);
1306 if (!am_generator)
1307 send_msg(MSG_IO_ERROR, data, 4, 0);
1308 break;
1309 case MSG_IO_TIMEOUT:
1310 if (msg_bytes != 4 || am_sender || am_generator)
1311 goto invalid_msg;
1312 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1313 val = IVAL(data, 0);
1314 if (!io_timeout || io_timeout > val) {
1315 if (INFO_GTE(MISC, 2))
1316 rprintf(FINFO, "Setting --timeout=%d to match server\n", val);
1317 io_timeout = val;
1318 }
1319 break;
1320 case MSG_NOOP:
1321 if (am_sender)
1322 maybe_send_keepalive();
1323 break;
1324 case MSG_DELETED:
1325 if (msg_bytes >= sizeof line)
1326 goto overflow;
1327 if (am_generator) {
1328 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1329 send_msg(MSG_DELETED, line, msg_bytes, 1);
1330 break;
1331 }
1332#ifdef ICONV_OPTION
1333 if (ic_recv != (iconv_t)-1) {
1334 xbuf outbuf, inbuf;
1335 char ibuf[512];
1336 int add_null = 0;
1337 int flags = ICB_INCLUDE_BAD | ICB_INIT;
1338
1339 INIT_CONST_XBUF(outbuf, line);
1340 INIT_XBUF(inbuf, ibuf, 0, (size_t)-1);
1341
1342 while (msg_bytes) {
1343 size_t len = msg_bytes > sizeof ibuf - inbuf.len ? sizeof ibuf - inbuf.len : msg_bytes;
1344 memcpy(ibuf + inbuf.len, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1345 inbuf.pos = 0;
1346 inbuf.len += len;
1347 if (!(msg_bytes -= len) && !ibuf[inbuf.len-1])
1348 inbuf.len--, add_null = 1;
1349 if (iconvbufs(ic_send, &inbuf, &outbuf, flags) < 0) {
1350 if (errno == E2BIG)
1351 goto overflow;
1352 /* Buffer ended with an incomplete char, so move the
1353 * bytes to the start of the buffer and continue. */
1354 memmove(ibuf, ibuf + inbuf.pos, inbuf.len);
1355 }
1356 flags &= ~ICB_INIT;
1357 }
1358 if (add_null) {
1359 if (outbuf.len == outbuf.size)
1360 goto overflow;
1361 outbuf.buf[outbuf.len++] = '\0';
1362 }
1363 msg_bytes = outbuf.len;
1364 } else
1365#endif
1366 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1367 /* A directory name was sent with the trailing null */
1368 if (msg_bytes > 0 && !line[msg_bytes-1])
1369 log_delete(line, S_IFDIR);
1370 else {
1371 line[msg_bytes] = '\0';
1372 log_delete(line, S_IFREG);
1373 }
1374 break;
1375 case MSG_SUCCESS:
1376 if (msg_bytes != 4) {
1377 invalid_msg:
1378 rprintf(FERROR, "invalid multi-message %d:%lu [%s%s]\n",
1379 tag, (unsigned long)msg_bytes, who_am_i(),
1380 inc_recurse ? "/inc" : "");
1381 exit_cleanup(RERR_STREAMIO);
1382 }
1383 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1384 if (am_generator)
1385 got_flist_entry_status(FES_SUCCESS, IVAL(data, 0));
1386 else
1387 successful_send(IVAL(data, 0));
1388 break;
1389 case MSG_NO_SEND:
1390 if (msg_bytes != 4)
1391 goto invalid_msg;
1392 data = perform_io(4, PIO_INPUT_AND_CONSUME);
1393 if (am_generator)
1394 got_flist_entry_status(FES_NO_SEND, IVAL(data, 0));
1395 else
1396 send_msg(MSG_NO_SEND, data, 4, 0);
1397 break;
1398 case MSG_ERROR_SOCKET:
1399 case MSG_ERROR_UTF8:
1400 case MSG_CLIENT:
1401 case MSG_LOG:
1402 if (!am_generator)
1403 goto invalid_msg;
1404 if (tag == MSG_ERROR_SOCKET)
1405 msgs2stderr = 1;
1406 /* FALL THROUGH */
1407 case MSG_INFO:
1408 case MSG_ERROR:
1409 case MSG_ERROR_XFER:
1410 case MSG_WARNING:
1411 if (msg_bytes >= sizeof line) {
1412 overflow:
1413 rprintf(FERROR,
1414 "multiplexing overflow %d:%lu [%s%s]\n",
1415 tag, (unsigned long)msg_bytes, who_am_i(),
1416 inc_recurse ? "/inc" : "");
1417 exit_cleanup(RERR_STREAMIO);
1418 }
1419 memcpy(line, perform_io(msg_bytes, PIO_INPUT_AND_CONSUME), msg_bytes);
1420 rwrite((enum logcode)tag, line, msg_bytes, !am_generator);
1421 if (first_message) {
1422 if (list_only && !am_sender && tag == 1 && msg_bytes < sizeof line) {
1423 line[msg_bytes] = '\0';
1424 check_for_d_option_error(line);
1425 }
1426 first_message = 0;
1427 }
1428 break;
1429 default:
1430 rprintf(FERROR, "unexpected tag %d [%s%s]\n",
1431 tag, who_am_i(), inc_recurse ? "/inc" : "");
1432 exit_cleanup(RERR_STREAMIO);
1433 }
1434}
1435
1436void wait_for_receiver(void)
1437{
1438 if (!iobuf.raw_input_ends_before)
1439 read_a_msg();
1440
1441 if (iobuf.raw_input_ends_before) {
1442 int ndx = read_int(iobuf.in_fd);
1443 if (ndx < 0) {
1444 switch (ndx) {
1445 case NDX_FLIST_EOF:
1446 flist_eof = 1;
1447 if (DEBUG_GTE(FLIST, 3))
1448 rprintf(FINFO, "[%s] flist_eof=1\n", who_am_i());
1449 break;
1450 case NDX_DONE:
1451 msgdone_cnt++;
1452 break;
1453 default:
1454 exit_cleanup(RERR_STREAMIO);
1455 }
1456 } else {
1457 struct file_list *flist;
1458 if (DEBUG_GTE(FLIST, 2)) {
1459 rprintf(FINFO, "[%s] receiving flist for dir %d\n",
1460 who_am_i(), ndx);
1461 }
1462 flist = recv_file_list(iobuf.in_fd);
1463 flist->parent_ndx = ndx;
1464#ifdef SUPPORT_HARD_LINKS
1465 if (preserve_hard_links)
1466 match_hard_links(flist);
1467#endif
1468 }
1469 }
1470}
1471
1472unsigned short read_shortint(int f)
1473{
1474 char b[2];
1475 read_buf(f, b, 2);
1476 return (UVAL(b, 1) << 8) + UVAL(b, 0);
1477}
1478
1479int32 read_int(int f)
1480{
1481 char b[4];
1482 int32 num;
1483
1484 read_buf(f, b, 4);
1485 num = IVAL(b, 0);
1486#if SIZEOF_INT32 > 4
1487 if (num & (int32)0x80000000)
1488 num |= ~(int32)0xffffffff;
1489#endif
1490 return num;
1491}
1492
1493int32 read_varint(int f)
1494{
1495 union {
1496 char b[5];
1497 int32 x;
1498 } u;
1499 uchar ch;
1500 int extra;
1501
1502 u.x = 0;
1503 ch = read_byte(f);
1504 extra = int_byte_extra[ch / 4];
1505 if (extra) {
1506 uchar bit = ((uchar)1<<(8-extra));
1507 if (extra >= (int)sizeof u.b) {
1508 rprintf(FERROR, "Overflow in read_varint()\n");
1509 exit_cleanup(RERR_STREAMIO);
1510 }
1511 read_buf(f, u.b, extra);
1512 u.b[extra] = ch & (bit-1);
1513 } else
1514 u.b[0] = ch;
1515#if CAREFUL_ALIGNMENT
1516 u.x = IVAL(u.b,0);
1517#endif
1518#if SIZEOF_INT32 > 4
1519 if (u.x & (int32)0x80000000)
1520 u.x |= ~(int32)0xffffffff;
1521#endif
1522 return u.x;
1523}
1524
1525int64 read_varlong(int f, uchar min_bytes)
1526{
1527 union {
1528 char b[9];
1529 int64 x;
1530 } u;
1531 char b2[8];
1532 int extra;
1533
1534#if SIZEOF_INT64 < 8
1535 memset(u.b, 0, 8);
1536#else
1537 u.x = 0;
1538#endif
1539 read_buf(f, b2, min_bytes);
1540 memcpy(u.b, b2+1, min_bytes-1);
1541 extra = int_byte_extra[CVAL(b2, 0) / 4];
1542 if (extra) {
1543 uchar bit = ((uchar)1<<(8-extra));
1544 if (min_bytes + extra > (int)sizeof u.b) {
1545 rprintf(FERROR, "Overflow in read_varlong()\n");
1546 exit_cleanup(RERR_STREAMIO);
1547 }
1548 read_buf(f, u.b + min_bytes - 1, extra);
1549 u.b[min_bytes + extra - 1] = CVAL(b2, 0) & (bit-1);
1550#if SIZEOF_INT64 < 8
1551 if (min_bytes + extra > 5 || u.b[4] || CVAL(u.b,3) & 0x80) {
1552 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1553 exit_cleanup(RERR_UNSUPPORTED);
1554 }
1555#endif
1556 } else
1557 u.b[min_bytes + extra - 1] = CVAL(b2, 0);
1558#if SIZEOF_INT64 < 8
1559 u.x = IVAL(u.b,0);
1560#elif CAREFUL_ALIGNMENT
1561 u.x = IVAL(u.b,0) | (((int64)IVAL(u.b,4))<<32);
1562#endif
1563 return u.x;
1564}
1565
1566int64 read_longint(int f)
1567{
1568#if SIZEOF_INT64 >= 8
1569 char b[9];
1570#endif
1571 int32 num = read_int(f);
1572
1573 if (num != (int32)0xffffffff)
1574 return num;
1575
1576#if SIZEOF_INT64 < 8
1577 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1578 exit_cleanup(RERR_UNSUPPORTED);
1579#else
1580 read_buf(f, b, 8);
1581 return IVAL(b,0) | (((int64)IVAL(b,4))<<32);
1582#endif
1583}
1584
1585void read_buf(int f, char *buf, size_t len)
1586{
1587 if (f != iobuf.in_fd) {
1588 if (safe_read(f, buf, len) != len)
1589 whine_about_eof(f); /* Doesn't return. */
1590 goto batch_copy;
1591 }
1592
1593 if (!IN_MULTIPLEXED) {
1594 memcpy(buf, perform_io(len, PIO_INPUT_AND_CONSUME), len);
1595 total_data_read += len;
1596 if (forward_flist_data)
1597 write_buf(iobuf.out_fd, buf, len);
1598 batch_copy:
1599 if (f == write_batch_monitor_in)
1600 safe_write(batch_fd, buf, len);
1601 return;
1602 }
1603
1604 while (1) {
1605 char *data;
1606 size_t siz;
1607
1608 while (!iobuf.raw_input_ends_before)
1609 read_a_msg();
1610
1611 siz = MIN(len, iobuf.raw_input_ends_before - iobuf.in.pos);
1612 data = perform_io(siz, PIO_INPUT_AND_CONSUME);
1613 if (iobuf.in.pos == iobuf.raw_input_ends_before)
1614 iobuf.raw_input_ends_before = 0;
1615
1616 /* The bytes at the "data" pointer will survive long
1617 * enough to make a copy, but not past future I/O. */
1618 memcpy(buf, data, siz);
1619 total_data_read += siz;
1620
1621 if (forward_flist_data)
1622 write_buf(iobuf.out_fd, buf, siz);
1623
1624 if (f == write_batch_monitor_in)
1625 safe_write(batch_fd, buf, siz);
1626
1627 if ((len -= siz) == 0)
1628 break;
1629 buf += siz;
1630 }
1631}
1632
1633void read_sbuf(int f, char *buf, size_t len)
1634{
1635 read_buf(f, buf, len);
1636 buf[len] = '\0';
1637}
1638
1639uchar read_byte(int f)
1640{
1641 uchar c;
1642 read_buf(f, (char*)&c, 1);
1643 return c;
1644}
1645
1646int read_vstring(int f, char *buf, int bufsize)
1647{
1648 int len = read_byte(f);
1649
1650 if (len & 0x80)
1651 len = (len & ~0x80) * 0x100 + read_byte(f);
1652
1653 if (len >= bufsize) {
1654 rprintf(FERROR, "over-long vstring received (%d > %d)\n",
1655 len, bufsize - 1);
1656 return -1;
1657 }
1658
1659 if (len)
1660 read_buf(f, buf, len);
1661 buf[len] = '\0';
1662 return len;
1663}
1664
1665/* Populate a sum_struct with values from the socket. This is
1666 * called by both the sender and the receiver. */
1667void read_sum_head(int f, struct sum_struct *sum)
1668{
1669 int32 max_blength = protocol_version < 30 ? OLD_MAX_BLOCK_SIZE : MAX_BLOCK_SIZE;
1670 sum->count = read_int(f);
1671 if (sum->count < 0) {
1672 rprintf(FERROR, "Invalid checksum count %ld [%s]\n",
1673 (long)sum->count, who_am_i());
1674 exit_cleanup(RERR_PROTOCOL);
1675 }
1676 sum->blength = read_int(f);
1677 if (sum->blength < 0 || sum->blength > max_blength) {
1678 rprintf(FERROR, "Invalid block length %ld [%s]\n",
1679 (long)sum->blength, who_am_i());
1680 exit_cleanup(RERR_PROTOCOL);
1681 }
1682 sum->s2length = protocol_version < 27 ? csum_length : (int)read_int(f);
1683 if (sum->s2length < 0 || sum->s2length > MAX_DIGEST_LEN) {
1684 rprintf(FERROR, "Invalid checksum length %d [%s]\n",
1685 sum->s2length, who_am_i());
1686 exit_cleanup(RERR_PROTOCOL);
1687 }
1688 sum->remainder = read_int(f);
1689 if (sum->remainder < 0 || sum->remainder > sum->blength) {
1690 rprintf(FERROR, "Invalid remainder length %ld [%s]\n",
1691 (long)sum->remainder, who_am_i());
1692 exit_cleanup(RERR_PROTOCOL);
1693 }
1694}
1695
1696/* Send the values from a sum_struct over the socket. Set sum to
1697 * NULL if there are no checksums to send. This is called by both
1698 * the generator and the sender. */
1699void write_sum_head(int f, struct sum_struct *sum)
1700{
1701 static struct sum_struct null_sum;
1702
1703 if (sum == NULL)
1704 sum = &null_sum;
1705
1706 write_int(f, sum->count);
1707 write_int(f, sum->blength);
1708 if (protocol_version >= 27)
1709 write_int(f, sum->s2length);
1710 write_int(f, sum->remainder);
1711}
1712
1713/* Sleep after writing to limit I/O bandwidth usage.
1714 *
1715 * @todo Rather than sleeping after each write, it might be better to
1716 * use some kind of averaging. The current algorithm seems to always
1717 * use a bit less bandwidth than specified, because it doesn't make up
1718 * for slow periods. But arguably this is a feature. In addition, we
1719 * ought to take the time used to write the data into account.
1720 *
1721 * During some phases of big transfers (file FOO is uptodate) this is
1722 * called with a small bytes_written every time. As the kernel has to
1723 * round small waits up to guarantee that we actually wait at least the
1724 * requested number of microseconds, this can become grossly inaccurate.
1725 * We therefore keep track of the bytes we've written over time and only
1726 * sleep when the accumulated delay is at least 1 tenth of a second. */
1727static void sleep_for_bwlimit(int bytes_written)
1728{
1729 static struct timeval prior_tv;
1730 static long total_written = 0;
1731 struct timeval tv, start_tv;
1732 long elapsed_usec, sleep_usec;
1733
1734#define ONE_SEC 1000000L /* # of microseconds in a second */
1735
1736 total_written += bytes_written;
1737
1738 gettimeofday(&start_tv, NULL);
1739 if (prior_tv.tv_sec) {
1740 elapsed_usec = (start_tv.tv_sec - prior_tv.tv_sec) * ONE_SEC
1741 + (start_tv.tv_usec - prior_tv.tv_usec);
1742 total_written -= elapsed_usec * bwlimit / (ONE_SEC/1024);
1743 if (total_written < 0)
1744 total_written = 0;
1745 }
1746
1747 sleep_usec = total_written * (ONE_SEC/1024) / bwlimit;
1748 if (sleep_usec < ONE_SEC / 10) {
1749 prior_tv = start_tv;
1750 return;
1751 }
1752
1753 tv.tv_sec = sleep_usec / ONE_SEC;
1754 tv.tv_usec = sleep_usec % ONE_SEC;
1755 select(0, NULL, NULL, NULL, &tv);
1756
1757 gettimeofday(&prior_tv, NULL);
1758 elapsed_usec = (prior_tv.tv_sec - start_tv.tv_sec) * ONE_SEC
1759 + (prior_tv.tv_usec - start_tv.tv_usec);
1760 total_written = (sleep_usec - elapsed_usec) * bwlimit / (ONE_SEC/1024);
1761}
1762
1763void io_flush(int flush_it_all)
1764{
1765 if (iobuf.out.len > iobuf.out_empty_len) {
1766 if (flush_it_all) /* FULL_FLUSH: flush everything in the output buffers */
1767 perform_io(iobuf.out.size - iobuf.out_empty_len, PIO_NEED_OUTROOM);
1768 else /* NORMAL_FLUSH: flush at least 1 byte */
1769 perform_io(iobuf.out.size - iobuf.out.len + 1, PIO_NEED_OUTROOM);
1770 }
1771 if (iobuf.msg.len)
1772 perform_io(iobuf.msg.size, PIO_NEED_MSGROOM);
1773}
1774
1775void write_shortint(int f, unsigned short x)
1776{
1777 char b[2];
1778 b[0] = (char)x;
1779 b[1] = (char)(x >> 8);
1780 write_buf(f, b, 2);
1781}
1782
1783void write_int(int f, int32 x)
1784{
1785 char b[4];
1786 SIVAL(b, 0, x);
1787 write_buf(f, b, 4);
1788}
1789
1790void write_varint(int f, int32 x)
1791{
1792 char b[5];
1793 uchar bit;
1794 int cnt = 4;
1795
1796 SIVAL(b, 1, x);
1797
1798 while (cnt > 1 && b[cnt] == 0)
1799 cnt--;
1800 bit = ((uchar)1<<(7-cnt+1));
1801 if (CVAL(b, cnt) >= bit) {
1802 cnt++;
1803 *b = ~(bit-1);
1804 } else if (cnt > 1)
1805 *b = b[cnt] | ~(bit*2-1);
1806 else
1807 *b = b[cnt];
1808
1809 write_buf(f, b, cnt);
1810}
1811
1812void write_varlong(int f, int64 x, uchar min_bytes)
1813{
1814 char b[9];
1815 uchar bit;
1816 int cnt = 8;
1817
1818 SIVAL(b, 1, x);
1819#if SIZEOF_INT64 >= 8
1820 SIVAL(b, 5, x >> 32);
1821#else
1822 if (x <= 0x7FFFFFFF && x >= 0)
1823 memset(b + 5, 0, 4);
1824 else {
1825 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1826 exit_cleanup(RERR_UNSUPPORTED);
1827 }
1828#endif
1829
1830 while (cnt > min_bytes && b[cnt] == 0)
1831 cnt--;
1832 bit = ((uchar)1<<(7-cnt+min_bytes));
1833 if (CVAL(b, cnt) >= bit) {
1834 cnt++;
1835 *b = ~(bit-1);
1836 } else if (cnt > min_bytes)
1837 *b = b[cnt] | ~(bit*2-1);
1838 else
1839 *b = b[cnt];
1840
1841 write_buf(f, b, cnt);
1842}
1843
1844/*
1845 * Note: int64 may actually be a 32-bit type if ./configure couldn't find any
1846 * 64-bit types on this platform.
1847 */
1848void write_longint(int f, int64 x)
1849{
1850 char b[12], * const s = b+4;
1851
1852 SIVAL(s, 0, x);
1853 if (x <= 0x7FFFFFFF && x >= 0) {
1854 write_buf(f, s, 4);
1855 return;
1856 }
1857
1858#if SIZEOF_INT64 < 8
1859 rprintf(FERROR, "Integer overflow: attempted 64-bit offset\n");
1860 exit_cleanup(RERR_UNSUPPORTED);
1861#else
1862 memset(b, 0xFF, 4);
1863 SIVAL(s, 4, x >> 32);
1864 write_buf(f, b, 12);
1865#endif
1866}
1867
1868void write_buf(int f, const char *buf, size_t len)
1869{
1870 size_t pos, siz;
1871
1872 if (f != iobuf.out_fd) {
1873 safe_write(f, buf, len);
1874 goto batch_copy;
1875 }
1876
1877 if (iobuf.out.size - iobuf.out.len < len)
1878 perform_io(len, PIO_NEED_OUTROOM);
1879
1880 pos = iobuf.out.pos + iobuf.out.len; /* Must be set after any flushing. */
1881 if (pos >= iobuf.out.size)
1882 pos -= iobuf.out.size;
1883
1884 /* Handle a split copy if we wrap around the end of the circular buffer. */
1885 if (pos >= iobuf.out.pos && (siz = iobuf.out.size - pos) < len) {
1886 memcpy(iobuf.out.buf + pos, buf, siz);
1887 memcpy(iobuf.out.buf, buf + siz, len - siz);
1888 } else
1889 memcpy(iobuf.out.buf + pos, buf, len);
1890
1891 iobuf.out.len += len;
1892 total_data_written += len;
1893
1894 batch_copy:
1895 if (f == write_batch_monitor_out)
1896 safe_write(batch_fd, buf, len);
1897}
1898
1899/* Write a string to the connection */
1900void write_sbuf(int f, const char *buf)
1901{
1902 write_buf(f, buf, strlen(buf));
1903}
1904
1905void write_byte(int f, uchar c)
1906{
1907 write_buf(f, (char *)&c, 1);
1908}
1909
1910void write_vstring(int f, const char *str, int len)
1911{
1912 uchar lenbuf[3], *lb = lenbuf;
1913
1914 if (len > 0x7F) {
1915 if (len > 0x7FFF) {
1916 rprintf(FERROR,
1917 "attempting to send over-long vstring (%d > %d)\n",
1918 len, 0x7FFF);
1919 exit_cleanup(RERR_PROTOCOL);
1920 }
1921 *lb++ = len / 0x100 + 0x80;
1922 }
1923 *lb = len;
1924
1925 write_buf(f, (char*)lenbuf, lb - lenbuf + 1);
1926 if (len)
1927 write_buf(f, str, len);
1928}
1929
1930/* Send a file-list index using a byte-reduction method. */
1931void write_ndx(int f, int32 ndx)
1932{
1933 static int32 prev_positive = -1, prev_negative = 1;
1934 int32 diff, cnt = 0;
1935 char b[6];
1936
1937 if (protocol_version < 30 || read_batch) {
1938 write_int(f, ndx);
1939 return;
1940 }
1941
1942 /* Send NDX_DONE as a single-byte 0 with no side effects. Send
1943 * negative nums as a positive after sending a leading 0xFF. */
1944 if (ndx >= 0) {
1945 diff = ndx - prev_positive;
1946 prev_positive = ndx;
1947 } else if (ndx == NDX_DONE) {
1948 *b = 0;
1949 write_buf(f, b, 1);
1950 return;
1951 } else {
1952 b[cnt++] = (char)0xFF;
1953 ndx = -ndx;
1954 diff = ndx - prev_negative;
1955 prev_negative = ndx;
1956 }
1957
1958 /* A diff of 1 - 253 is sent as a one-byte diff; a diff of 254 - 32767
1959 * or 0 is sent as a 0xFE + a two-byte diff; otherwise we send 0xFE
1960 * & all 4 bytes of the (non-negative) num with the high-bit set. */
1961 if (diff < 0xFE && diff > 0)
1962 b[cnt++] = (char)diff;
1963 else if (diff < 0 || diff > 0x7FFF) {
1964 b[cnt++] = (char)0xFE;
1965 b[cnt++] = (char)((ndx >> 24) | 0x80);
1966 b[cnt++] = (char)ndx;
1967 b[cnt++] = (char)(ndx >> 8);
1968 b[cnt++] = (char)(ndx >> 16);
1969 } else {
1970 b[cnt++] = (char)0xFE;
1971 b[cnt++] = (char)(diff >> 8);
1972 b[cnt++] = (char)diff;
1973 }
1974 write_buf(f, b, cnt);
1975}
1976
1977/* Receive a file-list index using a byte-reduction method. */
1978int32 read_ndx(int f)
1979{
1980 static int32 prev_positive = -1, prev_negative = 1;
1981 int32 *prev_ptr, num;
1982 char b[4];
1983
1984 if (protocol_version < 30)
1985 return read_int(f);
1986
1987 read_buf(f, b, 1);
1988 if (CVAL(b, 0) == 0xFF) {
1989 read_buf(f, b, 1);
1990 prev_ptr = &prev_negative;
1991 } else if (CVAL(b, 0) == 0)
1992 return NDX_DONE;
1993 else
1994 prev_ptr = &prev_positive;
1995 if (CVAL(b, 0) == 0xFE) {
1996 read_buf(f, b, 2);
1997 if (CVAL(b, 0) & 0x80) {
1998 b[3] = CVAL(b, 0) & ~0x80;
1999 b[0] = b[1];
2000 read_buf(f, b+1, 2);
2001 num = IVAL(b, 0);
2002 } else
2003 num = (UVAL(b,0)<<8) + UVAL(b,1) + *prev_ptr;
2004 } else
2005 num = UVAL(b, 0) + *prev_ptr;
2006 *prev_ptr = num;
2007 if (prev_ptr == &prev_negative)
2008 num = -num;
2009 return num;
2010}
2011
2012/* Read a line of up to bufsiz-1 characters into buf. Strips
2013 * the (required) trailing newline and all carriage returns.
2014 * Returns 1 for success; 0 for I/O error or truncation. */
2015int read_line_old(int fd, char *buf, size_t bufsiz)
2016{
2017 bufsiz--; /* leave room for the null */
2018 while (bufsiz > 0) {
2019 assert(fd != iobuf.in_fd);
2020 if (safe_read(fd, buf, 1) == 0)
2021 return 0;
2022 if (*buf == '\0')
2023 return 0;
2024 if (*buf == '\n')
2025 break;
2026 if (*buf != '\r') {
2027 buf++;
2028 bufsiz--;
2029 }
2030 }
2031 *buf = '\0';
2032 return bufsiz > 0;
2033}
2034
2035void io_printf(int fd, const char *format, ...)
2036{
2037 va_list ap;
2038 char buf[BIGPATHBUFLEN];
2039 int len;
2040
2041 va_start(ap, format);
2042 len = vsnprintf(buf, sizeof buf, format, ap);
2043 va_end(ap);
2044
2045 if (len < 0)
2046 exit_cleanup(RERR_STREAMIO);
2047
2048 if (len > (int)sizeof buf) {
2049 rprintf(FERROR, "io_printf() was too long for the buffer.\n");
2050 exit_cleanup(RERR_STREAMIO);
2051 }
2052
2053 write_sbuf(fd, buf);
2054}
2055
2056/* Setup for multiplexing a MSG_* stream with the data stream. */
2057void io_start_multiplex_out(int fd)
2058{
2059 io_flush(FULL_FLUSH);
2060
2061 if (msgs2stderr && DEBUG_GTE(IO, 2))
2062 rprintf(FINFO, "[%s] io_start_multiplex_out(%d)\n", who_am_i(), fd);
2063
2064 iobuf.out_empty_len = 4; /* See also OUT_MULTIPLEXED */
2065 io_start_buffering_out(fd);
2066
2067 iobuf.raw_data_header_pos = iobuf.out.pos + iobuf.out.len;
2068 iobuf.out.len += 4;
2069}
2070
2071/* Setup for multiplexing a MSG_* stream with the data stream. */
2072void io_start_multiplex_in(int fd)
2073{
2074 if (msgs2stderr && DEBUG_GTE(IO, 2))
2075 rprintf(FINFO, "[%s] io_start_multiplex_in(%d)\n", who_am_i(), fd);
2076
2077 iobuf.in_multiplexed = True; /* See also IN_MULTIPLEXED */
2078 io_start_buffering_in(fd);
2079}
2080
2081int io_end_multiplex_in(int mode)
2082{
2083 int ret = iobuf.in_multiplexed ? iobuf.in_fd : -1;
2084
2085 if (msgs2stderr && DEBUG_GTE(IO, 2))
2086 rprintf(FINFO, "[%s] io_end_multiplex_in(mode=%d)\n", who_am_i(), mode);
2087
2088 iobuf.in_multiplexed = False;
2089 if (mode == MPLX_SWITCHING)
2090 iobuf.raw_input_ends_before = 0;
2091 else
2092 assert(iobuf.raw_input_ends_before == 0);
2093 if (mode != MPLX_TO_BUFFERED)
2094 io_end_buffering_in(mode);
2095
2096 return ret;
2097}
2098
2099int io_end_multiplex_out(int mode)
2100{
2101 int ret = iobuf.out_empty_len ? iobuf.out_fd : -1;
2102
2103 if (msgs2stderr && DEBUG_GTE(IO, 2))
2104 rprintf(FINFO, "[%s] io_end_multiplex_out(mode=%d)\n", who_am_i(), mode);
2105
2106 if (mode != MPLX_TO_BUFFERED)
2107 io_end_buffering_out(mode);
2108 else
2109 io_flush(FULL_FLUSH);
2110
2111 iobuf.out.len = 0;
2112 iobuf.out_empty_len = 0;
2113
2114 return ret;
2115}
2116
2117void start_write_batch(int fd)
2118{
2119 /* Some communication has already taken place, but we don't
2120 * enable batch writing until here so that we can write a
2121 * canonical record of the communication even though the
2122 * actual communication so far depends on whether a daemon
2123 * is involved. */
2124 write_int(batch_fd, protocol_version);
2125 if (protocol_version >= 30)
2126 write_byte(batch_fd, inc_recurse);
2127 write_int(batch_fd, checksum_seed);
2128
2129 if (am_sender)
2130 write_batch_monitor_out = fd;
2131 else
2132 write_batch_monitor_in = fd;
2133}
2134
2135void stop_write_batch(void)
2136{
2137 write_batch_monitor_out = -1;
2138 write_batch_monitor_in = -1;
2139}