| 1 | #!/usr/bin/perl |
| 2 | # |
| 3 | # This script parses the default logfile format produced by rsync when running |
| 4 | # as a daemon with transfer logging enabled. It also parses a slightly tweaked |
| 5 | # version of the default format where %o has been replaced with %i. |
| 6 | # |
| 7 | # This script is derived from the xferstats script that comes with wuftpd. See |
| 8 | # the usage message at the bottom for the options it takes. |
| 9 | # |
| 10 | # Andrew Tridgell, October 1998 |
| 11 | |
| 12 | use Getopt::Long; |
| 13 | |
| 14 | # You may wish to edit the next line to customize for your default log file. |
| 15 | $usage_file = "/var/adm/rsyncd.log"; |
| 16 | |
| 17 | # Edit the following lines for default report settings. |
| 18 | # Entries defined here will be over-ridden by the command line. |
| 19 | |
| 20 | $hourly_report = 0; |
| 21 | $domain_report = 0; |
| 22 | $total_report = 0; |
| 23 | $depth_limit = 9999; |
| 24 | $only_section = ''; |
| 25 | |
| 26 | &Getopt::Long::Configure('bundling'); |
| 27 | &usage if !&GetOptions( |
| 28 | 'hourly-report|h' => \$hourly_report, |
| 29 | 'domain-report|d' => \$domain_report, |
| 30 | 'domain|D:s' => \$only_domain, |
| 31 | 'total-report|t' => \$total_report, |
| 32 | 'depth-limit|l:i' => \$depth_limit, |
| 33 | 'real|r' => \$real, |
| 34 | 'anon|a' => \$anon, |
| 35 | 'section|s:s' => \$only_section, |
| 36 | 'file|f:s' => \$usage_file, |
| 37 | ); |
| 38 | |
| 39 | $anon = 1 if !$real && !$anon; |
| 40 | |
| 41 | open(LOG, $usage_file) || die "Error opening usage log file: $usage_file\n"; |
| 42 | |
| 43 | if ($only_domain) { |
| 44 | print "Transfer Totals include the '$only_domain' domain only.\n"; |
| 45 | print "All other domains are filtered out for this report.\n\n"; |
| 46 | } |
| 47 | |
| 48 | if ($only_section) { |
| 49 | print "Transfer Totals include the '$only_section' section only.\n"; |
| 50 | print "All other sections are filtered out for this report.\n\n"; |
| 51 | } |
| 52 | |
| 53 | line: while (<LOG>) { |
| 54 | |
| 55 | next unless ($day,$time,$op,$host,$module,$file,$bytes) |
| 56 | = m#^ (\d+/\d\d/\d\d)\s+(\d\d:\d\d:\d\d)\s+\[\d+\]\s+(send|recv|[<>]f\S+)\s+ |
| 57 | (\S+)\s+\[\d+\.\d+\.\d+\.\d+\]\s+(\S+)\s+\(\S*\)\s+(.*)\s+(\d+) $ #x; |
| 58 | |
| 59 | # TODO actually divide the data by into send/recv categories |
| 60 | if ($op =~ /^>/) { |
| 61 | $op = 'send'; |
| 62 | } elsif ($op =~ /^</) { |
| 63 | $op = 'recv'; |
| 64 | } |
| 65 | |
| 66 | $daytime = $day; |
| 67 | $hour = substr($time,0,2); |
| 68 | |
| 69 | $file = $module . "/" . $file; |
| 70 | |
| 71 | $file =~ s|//|/|mg; |
| 72 | |
| 73 | @path = split(/\//, $file); |
| 74 | |
| 75 | $pathkey = ""; |
| 76 | for ($i=0; $i <= $#path && $i <= $depth_limit; $i++) { |
| 77 | $pathkey = $pathkey . "/" . $path[$i]; |
| 78 | } |
| 79 | |
| 80 | if ($only_section ne '') { |
| 81 | next unless (substr($pathkey,0,length($only_section)) eq $only_section); |
| 82 | } |
| 83 | |
| 84 | $host =~ tr/A-Z/a-z/; |
| 85 | |
| 86 | @address = split(/\./, $host); |
| 87 | |
| 88 | $domain = $address[$#address]; |
| 89 | if ( int($address[0]) > 0 || $#address < 2 ) |
| 90 | { $domain = "unresolved"; } |
| 91 | |
| 92 | if ($only_domain ne '') { |
| 93 | next unless (substr($domain,0,length($only_domain)) eq $only_domain); |
| 94 | } |
| 95 | |
| 96 | |
| 97 | # printf("c=%d day=%s bytes=%d file=%s path=%s\n", |
| 98 | # $#line, $daytime, $bytes, $file, $pathkey); |
| 99 | |
| 100 | $xferfiles++; # total files sent |
| 101 | $xfertfiles++; # total files sent |
| 102 | $xferfiles{$daytime}++; # files per day |
| 103 | $groupfiles{$pathkey}++; # per-group accesses |
| 104 | $domainfiles{$domain}++; |
| 105 | |
| 106 | $xferbytes{$daytime} += $bytes; # bytes per day |
| 107 | $domainbytes{$domain} += $bytes; # xmit bytes to domain |
| 108 | $xferbytes += $bytes; # total bytes sent |
| 109 | $groupbytes{$pathkey} += $bytes; # per-group bytes sent |
| 110 | |
| 111 | $xfertfiles{$hour}++; # files per hour |
| 112 | $xfertbytes{$hour} += $bytes; # bytes per hour |
| 113 | $xfertbytes += $bytes; # total bytes sent |
| 114 | } |
| 115 | close LOG; |
| 116 | |
| 117 | #@syslist = keys %systemfiles; |
| 118 | @dates = sort datecompare keys %xferbytes; |
| 119 | |
| 120 | if ($xferfiles == 0) {die "There was no data to process.\n";} |
| 121 | |
| 122 | |
| 123 | print "TOTALS FOR SUMMARY PERIOD ", $dates[0], " TO ", $dates[$#dates], "\n\n"; |
| 124 | printf("Files Transmitted During Summary Period %12.0f\n", $xferfiles); |
| 125 | printf("Bytes Transmitted During Summary Period %12.0f\n", $xferbytes); |
| 126 | #printf("Systems Using Archives %12.0f\n\n", $#syslist+1); |
| 127 | |
| 128 | printf("Average Files Transmitted Daily %12.0f\n", |
| 129 | $xferfiles / ($#dates + 1)); |
| 130 | printf("Average Bytes Transmitted Daily %12.0f\n", |
| 131 | $xferbytes / ($#dates + 1)); |
| 132 | |
| 133 | format top1 = |
| 134 | |
| 135 | Daily Transmission Statistics |
| 136 | |
| 137 | Number Of Number of Percent Of Percent Of |
| 138 | Date Files Sent MB Sent Files Sent Bytes Sent |
| 139 | --------------- ---------- ----------- ---------- ---------- |
| 140 | . |
| 141 | |
| 142 | format line1 = |
| 143 | @<<<<<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>> @>>>>>>> @>>>>>>> |
| 144 | $date, $nfiles, $nbytes/(1024*1024), $pctfiles, $pctbytes |
| 145 | . |
| 146 | |
| 147 | $^ = top1; |
| 148 | $~ = line1; |
| 149 | |
| 150 | foreach $date (sort datecompare keys %xferbytes) { |
| 151 | |
| 152 | $nfiles = $xferfiles{$date}; |
| 153 | $nbytes = $xferbytes{$date}; |
| 154 | $pctfiles = sprintf("%8.2f", 100*$xferfiles{$date} / $xferfiles); |
| 155 | $pctbytes = sprintf("%8.2f", 100*$xferbytes{$date} / $xferbytes); |
| 156 | write; |
| 157 | } |
| 158 | |
| 159 | if ($total_report) { |
| 160 | format top2 = |
| 161 | |
| 162 | Total Transfers from each Archive Section (By bytes) |
| 163 | |
| 164 | - Percent - |
| 165 | Archive Section NFiles MB Files Bytes |
| 166 | ------------------------------------- ------- ----------- ----- ------- |
| 167 | . |
| 168 | |
| 169 | format line2 = |
| 170 | @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @>>>>>> @>>>>>>>>>> @>>>> @>>>> |
| 171 | $section, $files, $bytes/(1024*1024), $pctfiles, $pctbytes |
| 172 | . |
| 173 | |
| 174 | $| = 1; |
| 175 | $- = 0; |
| 176 | $^ = top2; |
| 177 | $~ = line2; |
| 178 | |
| 179 | foreach $section (sort bytecompare keys %groupfiles) { |
| 180 | |
| 181 | $files = $groupfiles{$section}; |
| 182 | $bytes = $groupbytes{$section}; |
| 183 | $pctbytes = sprintf("%8.2f", 100 * $groupbytes{$section} / $xferbytes); |
| 184 | $pctfiles = sprintf("%8.2f", 100 * $groupfiles{$section} / $xferfiles); |
| 185 | write; |
| 186 | |
| 187 | } |
| 188 | |
| 189 | if ( $xferfiles < 1 ) { $xferfiles = 1; } |
| 190 | if ( $xferbytes < 1 ) { $xferbytes = 1; } |
| 191 | } |
| 192 | |
| 193 | if ($domain_report) { |
| 194 | format top3 = |
| 195 | |
| 196 | Total Transfer Amount By Domain |
| 197 | |
| 198 | Number Of Number of Percent Of Percent Of |
| 199 | Domain Name Files Sent MB Sent Files Sent Bytes Sent |
| 200 | ----------- ---------- ------------ ---------- ---------- |
| 201 | . |
| 202 | |
| 203 | format line3 = |
| 204 | @<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>>> @>>>>>>> @>>>>>>> |
| 205 | $domain, $files, $bytes/(1024*1024), $pctfiles, $pctbytes |
| 206 | . |
| 207 | |
| 208 | $- = 0; |
| 209 | $^ = top3; |
| 210 | $~ = line3; |
| 211 | |
| 212 | foreach $domain (sort domnamcompare keys %domainfiles) { |
| 213 | |
| 214 | if ( $domainsecs{$domain} < 1 ) { $domainsecs{$domain} = 1; } |
| 215 | |
| 216 | $files = $domainfiles{$domain}; |
| 217 | $bytes = $domainbytes{$domain}; |
| 218 | $pctfiles = sprintf("%8.2f", 100 * $domainfiles{$domain} / $xferfiles); |
| 219 | $pctbytes = sprintf("%8.2f", 100 * $domainbytes{$domain} / $xferbytes); |
| 220 | write; |
| 221 | |
| 222 | } |
| 223 | |
| 224 | } |
| 225 | |
| 226 | if ($hourly_report) { |
| 227 | |
| 228 | format top8 = |
| 229 | |
| 230 | Hourly Transmission Statistics |
| 231 | |
| 232 | Number Of Number of Percent Of Percent Of |
| 233 | Time Files Sent MB Sent Files Sent Bytes Sent |
| 234 | --------------- ---------- ----------- ---------- ---------- |
| 235 | . |
| 236 | |
| 237 | format line8 = |
| 238 | @<<<<<<<<<<<<<< @>>>>>>>>> @>>>>>>>>>> @>>>>>>> @>>>>>>> |
| 239 | $hour, $nfiles, $nbytes/(1024*1024), $pctfiles, $pctbytes |
| 240 | . |
| 241 | |
| 242 | |
| 243 | $| = 1; |
| 244 | $- = 0; |
| 245 | $^ = top8; |
| 246 | $~ = line8; |
| 247 | |
| 248 | foreach $hour (sort keys %xfertbytes) { |
| 249 | |
| 250 | $nfiles = $xfertfiles{$hour}; |
| 251 | $nbytes = $xfertbytes{$hour}; |
| 252 | $pctfiles = sprintf("%8.2f", 100*$xfertfiles{$hour} / $xferfiles); |
| 253 | $pctbytes = sprintf("%8.2f", 100*$xfertbytes{$hour} / $xferbytes); |
| 254 | write; |
| 255 | } |
| 256 | } |
| 257 | exit(0); |
| 258 | |
| 259 | sub datecompare { |
| 260 | $a gt $b; |
| 261 | } |
| 262 | |
| 263 | sub domnamcompare { |
| 264 | |
| 265 | $sdiff = length($a) - length($b); |
| 266 | ($sdiff < 0) ? -1 : ($sdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0; |
| 267 | |
| 268 | } |
| 269 | |
| 270 | sub bytecompare { |
| 271 | |
| 272 | $bdiff = $groupbytes{$b} - $groupbytes{$a}; |
| 273 | ($bdiff < 0) ? -1 : ($bdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0; |
| 274 | |
| 275 | } |
| 276 | |
| 277 | sub faccompare { |
| 278 | |
| 279 | $fdiff = $fac{$b} - $fac{$a}; |
| 280 | ($fdiff < 0) ? -1 : ($fdiff > 0) ? 1 : ($a lt $b) ? -1 : ($a gt $b) ? 1 : 0; |
| 281 | |
| 282 | } |
| 283 | |
| 284 | sub usage |
| 285 | { |
| 286 | die <<EOT; |
| 287 | USAGE: rsyncstats [options] |
| 288 | |
| 289 | OPTIONS: |
| 290 | -f FILENAME Use FILENAME for the log file. |
| 291 | -h Include report on hourly traffic. |
| 292 | -d Include report on domain traffic. |
| 293 | -t Report on total traffic by section. |
| 294 | -D DOMAIN Report only on traffic from DOMAIN. |
| 295 | -l DEPTH Set DEPTH of path detail for sections. |
| 296 | -s SECTION Set SECTION to report on. For example, "-s /pub" |
| 297 | will report only on paths under "/pub". |
| 298 | EOT |
| 299 | } |