| 1 | NEWS for rsync 2.6.4 (UNRELEASED) |
| 2 | Protocol: 29 (changed) |
| 3 | Changes since 2.6.3: |
| 4 | |
| 5 | OUTPUT CHANGES: |
| 6 | |
| 7 | - When rsync deletes a directory and outputs a verbose message about |
| 8 | it, it now appends a trailing slash to the name instead of (only |
| 9 | sometimes) outputting a preceding "directory " string. |
| 10 | |
| 11 | - The --stats output will contain file-list time-statistics if both |
| 12 | sides are 2.6.4, or if the local side is 2.6.4 and the files are |
| 13 | being pushed (since the stats come from the sending side). |
| 14 | (Requires protocol 29 for a pull.) |
| 15 | |
| 16 | - The "%o" (operation) log-format escape now has a third value (besides |
| 17 | "send" and "recv"): "del." (with trailing dot to make it 4 chars). |
| 18 | This changes the way deletions are logged in the daemon's log file. |
| 19 | |
| 20 | - When the --log-format option is combined with --verbose, rsync now |
| 21 | avoids outputting the name of the file twice in most circumstances. |
| 22 | As long as the --log-format item does not refer to any post-transfer |
| 23 | items (such as %b or %c), the --log-format message is output prior to |
| 24 | the transfer with --verbose being the equivalent of a --log-format of |
| 25 | '%n%L' (which outputs the name and any symlink info). If the log |
| 26 | output must occur after the transfer to be complete, the only time |
| 27 | the name is also output prior to the transfer is when --progress was |
| 28 | specified (so that the name will precede the progress stats, and the |
| 29 | full --log-format output will come after). |
| 30 | |
| 31 | BUG FIXES: |
| 32 | |
| 33 | - Restore the list-clearing behavior of "!" in a .cvsignore file (2.6.3 |
| 34 | was only treating it as a special token in an rsync include/exclude |
| 35 | file). |
| 36 | |
| 37 | - The combination of --verbose and --dry-run now mentions the full list |
| 38 | of changes that would be output without --dry-run. |
| 39 | |
| 40 | - Avoid a mkdir warning when removing a directory in the destination |
| 41 | that already exists in the --backup-dir. |
| 42 | |
| 43 | - An OS that has a binary mode for its files (such as cygwin) needed |
| 44 | setmode(fd, O_BINARY) called on the temp-file we opened with |
| 45 | mkstemp(). (Fix derived from the cygwin's 2.6.3 rsync package.) |
| 46 | |
| 47 | - Fixed a potential hang when verbosity is high, the client side is |
| 48 | the sender, and the file-list is large. |
| 49 | |
| 50 | - We now check if the OS doesn't support using mknod() for creating |
| 51 | FIFOs and sockets, and compile-in using mkfifo() and socket() when |
| 52 | necessary. |
| 53 | |
| 54 | - Fixed an off-by-one error in the handling of --max-delete=N. |
| 55 | |
| 56 | - One place in the code wasn't checking if fork() failed. |
| 57 | |
| 58 | - The "ignore nonreadable" daemon parameter used to erroneously affect |
| 59 | symlinks that pointed to a non-existent file. This has been fixed. |
| 60 | |
| 61 | - If the OS does not have lchown() and a chown() of a symlink will |
| 62 | affect the referent of a symlink (as it should), we no longer try |
| 63 | to set the user and group of a symlink. |
| 64 | |
| 65 | - The generator now properly runs the hard-link loop and the dir-time |
| 66 | rewriting loop after we're sure that the redo phase is complete. |
| 67 | |
| 68 | - When --backup was specified with --partial-dir=DIR (where DIR is a |
| 69 | relative path), the backup code was erroneously trying to backup a |
| 70 | file that was put into the partial-dir. |
| 71 | |
| 72 | - If a file gets resent in a single transfer and the --backup option is |
| 73 | enabled along with --inplace, rsync no longer performs a duplicate |
| 74 | backup (it used to overwrite the first backup with the failed file). |
| 75 | |
| 76 | - One call to flush_write_file() was not being checked for an error. |
| 77 | |
| 78 | - The --no-relative option was not being sent from the client to a |
| 79 | server sender. |
| 80 | |
| 81 | - If an rsync daemon specified "dont compress = ..." for a file and the |
| 82 | client tried to specify --compress, the libz code was not handling a |
| 83 | compression level of 0 properly. This could cause a transfer failure |
| 84 | if the block-size for a file was large enough (e.g. rsync might have |
| 85 | exited with an error for large files). |
| 86 | |
| 87 | - Fixed a bug that would sometimes surface when using --compress and |
| 88 | sending a file with a block-size larger than 64K (either manually |
| 89 | specified, or computed due to the file being really large). Prior |
| 90 | versions of rsync would sometimes fail to decompress the data |
| 91 | properly, and thus the transferred file would fail its verification. |
| 92 | |
| 93 | - If a daemon can't open the specified log file (i.e. syslog is not |
| 94 | being used), die without crashing. We also output an error about |
| 95 | the failure on stderr (which will only be seen if --no-detach was |
| 96 | specified). |
| 97 | |
| 98 | - A local transfer no longer duplicates all its include/exclude options |
| 99 | (since the forked process already has a copy of the exclude list, |
| 100 | there's no need to send them a set of duplicates). |
| 101 | |
| 102 | - When --progress is specified, the output of items that the generator |
| 103 | is creating (e.g. dirs, symlinks) is now integrated into the progress |
| 104 | output without overlapping it. (Requires protocol 29.) |
| 105 | |
| 106 | - When --timeout is specified, lulls that occur in the transfer while |
| 107 | the generator is doing work that does not generate socket traffic |
| 108 | (looking for changed files, deleting files, doing directory-time |
| 109 | touch-ups, etc.) will cause a new keep-alive packet to be sent that |
| 110 | should keep the transfer going as long as the generator continues to |
| 111 | make progress. (Requires protocol 29.) |
| 112 | |
| 113 | - The stat size of a device is not added to the total file size of the |
| 114 | items in the transfer since the size might be undefined on some OSes. |
| 115 | |
| 116 | - Fixed a problem with refused-option messages sometimes not making it |
| 117 | back to the client side when a remote --files-from was in effect and |
| 118 | the daemon was the receiver. |
| 119 | |
| 120 | ENHANCEMENTS: |
| 121 | |
| 122 | - Rsync now supports popt's option aliases, which means that you can |
| 123 | use /etc/popt and/or ~/.popt to create your own option aliases. |
| 124 | |
| 125 | - Added the --delete-during (--del) option which will delete files |
| 126 | from the receiving side incrementally as each directory in the |
| 127 | transfer is being processed. This makes it more efficient than the |
| 128 | default, before-the-transfer behavior, which is now available as |
| 129 | --delete-before (and is still the default --delete-WHEN option that |
| 130 | will be chosen if --delete or --delete-excluded is specified without |
| 131 | a --delete-WHEN choice). All the --del* options infer --delete, so |
| 132 | an rsync daemon that refuses "delete" will still refuse to allow any |
| 133 | file-deleting options. |
| 134 | |
| 135 | - All the --delete-WHEN options are now more memory efficient: |
| 136 | Previously an entire duplicate set of file-list objects was created |
| 137 | on the receiving side for the entire destination hierarchy. The new |
| 138 | algorithm only creates one directory of objects at a time (for files |
| 139 | inside the transfer). |
| 140 | |
| 141 | - Added support for specifying multiple --compare-dest or --link-dest |
| 142 | options, but only of a single type. (Promoted from the patches dir |
| 143 | and enhanced.) |
| 144 | |
| 145 | - Added the --max-size option. (Promoted from the patches dir.) |
| 146 | |
| 147 | - The daemon-mode options were separated from the normal rsync options |
| 148 | so that they can't be mixed together. This makes it impossible to |
| 149 | start a daemon that had improper default option values that could |
| 150 | cause problems when a client connects (e.g. a hang or an abort). |
| 151 | |
| 152 | - The --bwlimit option may now be used in combination with --daemon |
| 153 | to specify both a default value for the daemon side and a value |
| 154 | that cannot be exceeded by a user-specified --bwlimit option. |
| 155 | |
| 156 | - Added the "port" parameter to the rsyncd.conf file. (Promoted from |
| 157 | the patches dir.) Also added "address". A command-line option |
| 158 | will take precedence over a config-file option, as expected. |
| 159 | |
| 160 | - In _exit_cleanup(): when we are exiting with a partially-received |
| 161 | file, we now flush any data in the write-cache before closing the |
| 162 | partial file. |
| 163 | |
| 164 | - The --inplace support was enhanced to work with --compare-dest and |
| 165 | --link-dest. (Requires protocol 29.) |
| 166 | |
| 167 | - Added the --dirs (-d) option for an easier way to copy directories |
| 168 | without recursion. |
| 169 | |
| 170 | - Added the --list-only option, which is mainly a way for the client to |
| 171 | put the server into listing mode without needing to resort to any |
| 172 | internal option kluges (e.g. the age-old use of "-r --exclude="/*/*" |
| 173 | for a non-recursive listing). This option is used automatically |
| 174 | (behind the scenes) when a modern rsync speaks to a modern daemon, |
| 175 | but may also be specified manually if you want to force the use of |
| 176 | the --list-only option over a remote-shell connection. |
| 177 | |
| 178 | - Added the --omit-dir-times (-O) option, which will avoid updating |
| 179 | the modified time for directories when --times was specified. This |
| 180 | option will avoid an extra pass through the file-list at the end of |
| 181 | the transfer (to tweak all the directory times), which can result in |
| 182 | an appreciable speedup for a really large transfer. (Promoted from |
| 183 | the patches dir.) |
| 184 | |
| 185 | - Added the --filter (-f) option and its helper option, -F. Filter |
| 186 | rules are an extension to the existing include/exclude handling |
| 187 | that also supports nested filter files as well as per-directory |
| 188 | filter files (like .cvsignore, but with full filter-rule parsing). |
| 189 | This new option was chosen in order to ensure that all existing |
| 190 | include/exclude processing remained 100% compatible with older |
| 191 | versions. Protocol 29 is needed for full filter-rule support, but |
| 192 | backward-compatible rules work with earlier protocol versions. |
| 193 | (Promoted from the patches dir and enhanced.) |
| 194 | |
| 195 | - Added the --delay-updates option that puts all updated files into |
| 196 | a temporary directory (by default ".~tmp~", but settable via the |
| 197 | --partial-dir=DIR option) until the end of the transfer. This |
| 198 | makes the updates a little more atomic for a large transfer. |
| 199 | |
| 200 | - If rsync is put into the background, any output from --progress is |
| 201 | reduced. |
| 202 | |
| 203 | - Documented the "max verbosity" setting for rsyncd.conf. (This |
| 204 | setting was added a couple releases ago, but left undocumented.) |
| 205 | |
| 206 | - The sender and the generator now double-check the file-list index |
| 207 | they are given, and refuse to try to do a file transfer on a |
| 208 | non-file index (since that would indicate that something had gone |
| 209 | very wrong). |
| 210 | |
| 211 | - Added the --itemize-changes (-i) option, which is a way to output a |
| 212 | more detailed list of what files changed in any way and how they |
| 213 | changed. The effect is the same as specifying a --log-format of |
| 214 | "%i %n%L" (see the rsyncd.conf manpage). Works with --dry-run too. |
| 215 | |
| 216 | - Added the --fuzzy option, which attempts to find a basis file for a |
| 217 | file that is being created from scratch. The current algorithm |
| 218 | only looks in the destination directory for the created file, but |
| 219 | it does attempt to find a match based on size/mod-time (in case the |
| 220 | file was renamed with no other changes) as well as based on a fuzzy |
| 221 | name-matching algorithm. This option requires protocol 29 because |
| 222 | it needs the new file-sorting order. (Promoted from patches dir |
| 223 | and enhanced.) |
| 224 | |
| 225 | - Added the --remove-sent-files option, which lets you move files |
| 226 | between systems. |
| 227 | |
| 228 | - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal |
| 229 | enclosed in '[' and ']' (e.g. "[::1]"). (We already allowed IPv6 |
| 230 | literals in the rsync://HOST:PORT/PATH format.) |
| 231 | |
| 232 | - When building under windows, the default for --daemon is now to |
| 233 | avoid detaching, requiring the new --detach option to force rsync |
| 234 | to detach. |
| 235 | |
| 236 | - Improved the option descriptions in the --help text. |
| 237 | |
| 238 | SUPPORT FILES: |
| 239 | |
| 240 | - Added atomic-rsync to the support dir: a perl script that will |
| 241 | transfer some files using rsync, and then move the updated files into |
| 242 | place all at once at the end of the transfer. Only works when |
| 243 | pulling, and uses --link-dest and a parallel hierarchy of files to |
| 244 | effect its update. |
| 245 | |
| 246 | - Added mnt-excl to the support dir: a perl script that takes the |
| 247 | /proc/mounts file and translates it into a set of excludes that will |
| 248 | exclude all mount points (even mapped mounts to the same disk). The |
| 249 | excludes are made relative to the specified source dir and properly |
| 250 | anchored. |
| 251 | |
| 252 | - Added savetransfer.c to the support dir: a C program that can make |
| 253 | a copy of all the data that flows over the wire. This lets you test |
| 254 | for data corruption (by saving the data on both the sending side and |
| 255 | the receiving side) or provides a way to help debug a protocol error. |
| 256 | |
| 257 | - Added rrsync to the support dir: this is my version of Joe Smith's |
| 258 | restricted rsync perl script. This helps to ensure that only certain |
| 259 | rsync commands can be run by an ssh invocation. |
| 260 | |
| 261 | INTERNAL: |
| 262 | |
| 263 | - Added better checking of the checksum-header values that come over |
| 264 | the socket. |
| 265 | |
| 266 | - Merged a variety of file-deleting functions into a single function so |
| 267 | that it is easier to maintain. |
| 268 | |
| 269 | - Improved the type of some variables (particularly blocksize vars) for |
| 270 | consistency and proper size. |
| 271 | |
| 272 | - Got rid of the uint64 type (which we didn't need). |
| 273 | |
| 274 | - Use a slightly more compatible set of core #include directives. |
| 275 | |
| 276 | - Defined int32 in a way that ensures that the build dies if we can't |
| 277 | find a variable with at least 32 bits. |
| 278 | |
| 279 | - The daemon's "read only" config item now sets an internal read_only |
| 280 | variable that makes extra sure that no write/delete calls on the |
| 281 | read-only side can succeed. |
| 282 | |
| 283 | PROTOCOL DIFFERENCES FOR VERSION 29: |
| 284 | |
| 285 | - A 16-bit flag-word is transmitted after every file-list index. This |
| 286 | indicates what is changing between the sender and the receiver. The |
| 287 | generator now transmits an index and a flag-word to indicate when |
| 288 | dirs and symlinks have changed (instead of producing a message), |
| 289 | which makes the outputting of the information more consistent and |
| 290 | less prone to screen corruption (because either the receiver or the |
| 291 | sender is now outputting all the file-change info). |
| 292 | |
| 293 | - If --inplace is specified, the generator flags any transfer that is |
| 294 | using an alternate basis file so that the sender can use the entire |
| 295 | basis file in the rsync algorithm (unlike a normal --inplace update). |
| 296 | |
| 297 | - The sending of exclude names is done using filter-rule syntax. This |
| 298 | means that all names have a prefixed rule indicator, even excludes |
| 299 | (which used to be sent as a bare pattern, when possible). The -C |
| 300 | option will include the per-dir .cvsignore merge file in the list of |
| 301 | filter rules so it is positioned correctly (unlike in some older |
| 302 | transfer scenarios). |
| 303 | |
| 304 | - Rsync sorts the filename list in a different way: it sorts the subdir |
| 305 | names after the non-subdir names for each dir's contents, and it |
| 306 | always puts a dir's contents immediately after the dir's name in the |
| 307 | list. (Previously an item named "foo.txt" would sort in between |
| 308 | directory "foo/" and "foo/bar".) |
| 309 | |
| 310 | - When talking to a protocol 29 rsync daemon, a list-only request |
| 311 | is able to note this before the options are sent over the wire and |
| 312 | the new --list-only option is included in the options. |
| 313 | |
| 314 | - When the --stats bytes are sent over the wire (or stored in a batch), |
| 315 | they now include two elapsed-time values: one for how long it took to |
| 316 | build the file-list, and one for how long it took to send it over the |
| 317 | wire (each expressed in thousandths of a second). |
| 318 | |
| 319 | - When --delete-excluded is specified with some filter excludes, a |
| 320 | client sender will now initiate a send of the filter rules to the |
| 321 | receiver (older protocols used to omit the sending of excludes in |
| 322 | this situation since there were no receiver-specific rules that |
| 323 | survived --delete-excluded back then). Note that, as with all the |
| 324 | filter-list sending, only items that are significant to the other |
| 325 | side will actually be sent over the wire, so the filter-rule list |
| 326 | is often empty in this scenario. |
| 327 | |
| 328 | - A protocol-29 batch file includes a bit for the setting of the --dirs |
| 329 | option. Also, the shell script created by --write-batch will use the |
| 330 | --filter option instead of --exclude-from to capture any filter rules. |
| 331 | |
| 332 | - An index equal to the file-list count is sent as a keep-alive packet |
| 333 | from the generator to the sender, which then forwards it on to the |
| 334 | receiver. This normally invalid index is only a valid keep-alive |
| 335 | packet if the 16-bit flag-word that follows it contains a single bit |
| 336 | (ITEM_IS_NEW, which is normally an illegal flag to appear alone). |
| 337 | |
| 338 | BUILD CHANGES: |
| 339 | |
| 340 | - Handle an operating system that use mkdev() in place of makedev(). |
| 341 | |
| 342 | - Improved configure to better handle cross-compiling. |