Changed the literal 9000 into "OPT_REFUSED_BASE".

[rsync/rsync.git] / NEWS

NEWS for rsync 2.6.1 (UNRELEASED)
Protocol: 27 (unchanged)
Changes since 2.6.0:

  ENHANCEMENTS:

    * Lower memory use and more optimal transfer of data over
      the socket (see the INTERNAL section for details).

    * The RSYNC_PROXY environment variable can now contain a
      "USER:PASS@" prefix before the "HOST:PORT" information.
      (Bardur Arantsson)

    * The --progress output now mentions how far along in the
      transfer we are, including both a count of files transferred
      and a percentage of the total file-count that we're processed.

  BUG FIXES:

    * When -x (--one-file-system) is combined with -L (--copy-links)
      or --copy-unsafe-links, no symlinked files are skipped, even
      if the referant file is on a different filesystem.

    * The --link-dest code now works properly for a non-root user
      when the UIDs of the source and destination differ and -o was
      specified, and when the group of the source can't be used on
      the destination and -g was specified.  (Wayne Davison)

    * Fixed a bug in the handling of -H (hard-links) that might
      cause the expanded PATH/NAME value of the current item to
      get overwritten (due to an expanded-name caching bug).
      (Wayne Davison)
      
    * We now reset the "new data has been sent" flag at the start
      of each file we send.  This makes sure that an interrupted
      transfer with the --partial option set doesn't keep a shorter
      temp file than the current basis file when no new data has been
      transfered over the wire for that file.  (Wayne Davison)

    * Fixed a byte-order problem in --batch-mode on big-endian
      machines.  (Jay Fenlason)

    * Fixed configure bug when running "./configure --disable-ipv6".
      (Wayne Davison)

    * Fixed "make test" bug when build dir is not the source dir.

    * When using --cvs-exclude, the exclude items we get from a
      directory's .cvsignore file once again only affect that one
      directory (and not all following directories too).

    * When transferring a file that has group 0 with -g specified
      (typically via -a) and not enough privs to retain the group,
      rsync no longer complains about "chown" failing.

    * When specifying the USER@HOST: prefix for a file, the USER
      part can now contain an '@', if needed (i.e. the last '@'
      is used to find the HOST, not the first).

    * Fixed some bugs in the handling of group IDs for non-root
      users:  (1) It properly handles a group that the sender didn't
      have a name for (it would previously skip changing the group
      on any files in that group).  (2) If --numeric-ids is used,
      rsync no longer attempts to set groups that the user doesn't
      have the permission to set.

    * Fixed the "refuse options" setting in the rsyncd.conf file.

  INTERNAL:

    * Most of the I/O is now buffered, which results in a pretty
      large speedup when running under MS Windows.  (Craig Barratt)

    * Optimizations to the name-handling/comparing code have made
      some significant reductions in user-CPU time for large file
      sets.  (Wayne Davison)

    * Some variable-type cleanup that makes the code more consistent.
      (Wayne Davison)

    * Reduced memory requirements of hard link preservation.
      (J.W. Schultz)

    * Implemented a new algorithm for hard-link handling that speeds
      up the code significantly.  (J.W. Schultz and Wayne Davison)

    * The --hard-link option now uses the first existing file in the
      group of linked files as the basis for the transfer.  This
      prevents the sub-optimal transfer of a file's data when a new
      hardlink is added on the sending side and it sorts alphabetically
      earlier in the list than the files that are already present on the
      receiving side.

    * Dropped support for protocol versions less than 20
      (2.3.0 released 15 Mar 1999) and activated warnings for
      protocols less than 25 (2.5.0 released 23 Aug 2001)
          (Wayne Davison and J.W. Schultz, severally)

    * More optimal data transmission for --hard-links (protocol 28).

    * More optimal data transmission for --checksum (protocol 28).

    * Less memory is used when --checksum is specified.

    * Less memory is used in the file list (a per-file savings).

    * Changed hardlink info and file_struct + strings to use
      allocation pools.  This reduces memory use for large
      filesets and permits freeing memory to the OS.  (J.W. Schultz) 

    * The 2 pipes used between the receiver and generator processes
      (which are forked on the same machine) were reduced to 1 pipe
      and the protocol improved so that (1) it is now impossible to
      have the "redo" pipe fill up and hang rsync, and (2) trailing
      messages from the receiver don't get lost on their way through
      the generator over to the sender (the latter mainly affected
      hard-link messages).  (Wayne Davison)

    * The reading & writing of the file list in batch-mode is now
      handled by the same code that sends & receives the list over
      the wire.  This makes it much easier to maintain.

    * Optimized the -x (--one-file-system) flag's handling of any
      mount-point directories we encounter (it no longer scans the
      contents of the mount-point dirs, just to throw away the data).

    * Improved the internal uid/gid code to be more portable and
      a little more optimized.

\f
NEWS for rsync 2.6.0 (1 Jan 2004)
Protocol: 27 (changed)
Changes since 2.5.7:

  ENHANCEMENTS:

    * "ssh" is now the default remote shell for rsync.  If you want to
      change this, configure like this:  "./configure --with-rsh=rsh".

    * Added --files-from, --no-relative, --no-implied-dirs, and --from0.
      Note that --from0 affects the line-ending character for all the
      files read by the --*-from options. (Wayne Davison)

    * Length of csum2 is now per-file starting with protocol version
      27. (J.W. Schultz)

    * Per-file dynamic block size is now sqrt(file length).  The
      per-file checksum size is determined according to an algorithm
      provided by Donovan Baarda which reduces the probability of rsync
      algorithm corrupting data and falling back using the whole md4
      checksums. (J.W. Schultz, Donovan Baarda)

    * The --stats option no longer includes the (debug) malloc summary
      unless the verbose option was specified at least twice.

    * Added a new error/warning code for when files vanish from the
      sending side.  Made vanished source files not interfere with the
      file-deletion pass when --delete-after was specified.

    * Various trailing-info sections are now preceded by a newline.

  BUG FIXES:

    * Fixed several exclude/include matching bugs when using wild-cards.
      This has a several user-visible effects, all of which make the
      matching more consistent and intuitive.  This should hopefully not
      cause anyone problems since it makes the matching work more like
      what people are expecting. (Wayne Davison)

      - A pattern with a "**" no longer causes a "*" to match slashes.
        For example, with "/*/foo/**", "foo" must be 2 levels deep.
	[If your string has BOTH "*" and "**" wildcards, changing the
	"*" wildcards to "**" will provide the old behavior in all
	versions.]

      - "**/foo" now matches at the base of the transfer (like /foo
        does).  [Use "/**/foo" to get the old behavior in all versions.]

      - A non-anchored wildcard term floats to match beyond the base of
        the transfer.  E.g. "CVS/R*" matches at the end of the path,
        just like the non-wildcard term "CVS/Root" does. [Use "/CVS/R*"
        to get the old behavior in all versions.]

      - Including a "**" in the match term causes it to be matched
        against the entire path, not just the name portion, even if
        there aren't any interior slashes in the term.  E.g. "foo**bar"
        would exclude "/path/foo-bar" (just like before) as well as
        "/foo-path/baz-bar" (unlike before).  [Use "foo*bar" to get the
        old behavior in all versions.]

    * The exclude list specified in the daemon's config file is now
      properly applied to the pulled items no matter how deep the
      user's file-args are in the source tree.  (Wayne Davison)

    * For protocol version >= 27, mdfour_tail() is called when the
      block size (including checksum_seed) is a multiple of 64.
      Previously it was not called, giving the wrong MD4 checksum.
      (Craig Barratt)

    * For protocol version >= 27, a 64 bit bit counter is used in
      mdfour.c as required by the RFC.  Previously only a 32 bit bit
      counter was used, causing incorrect MD4 file checksums for
      file sizes >= 512MB - 4.  (Craig Barratt)

    * Fixed a crash bug when interacting with older rsync versions and
      multiple files of the same name are destined for the same dir.
      (Wayne Davison)

    * Keep tmp names from overflowing MAXPATHLEN.

    * Make --link-dest honor the absence of -p, -o, and -g.

    * Made rsync treat a trailing slash in the destination in a more
      consistent manner.

    * Fixed file I/O error detection.  (John Van Essen)

    * Fixed bogus "malformed address {hostname}" message in rsyncd log
      when checking IP address against hostnames from "hosts allow"
      and "hosts deny" parameters in config file.

    * Print heap statistics when verbose >= 2 instead of when >= 1.

    * Fixed a compression (-z) bug when syncing a mostly-matching file
      that contains already-compressed data.  (Yasuoka Masahiko and
      Wayne Davison)

    * Fixed a bug in the --backup code that could cause deleted files
      to not get backed up.

    * When the backup code makes new directories, create them with mode
      0700 instead of 0755 (since the directory permissions in the
      backup tree are not yet copied from the main tree).

    * Call setgroups() in a more portable manner.

    * Improved file-related error messages to better indicate exactly
      what pathname failed. (Wayne Davison)

    * Fixed some bugs in the handling of --delete and --exclude when
      using the --relative (-R) option. (Wayne Davison)

    * Fixed bug that prevented regular files from replacing
      special files and caused a directory in --link-dest or
      --compare-dest to block the creation of a file with the
      same path.  A directory still cannot be replaced by a
      regular file unless --delete specified.  (J.W. Schultz)

    * Detect and report when open or opendir succeed but read and
      readdir fail caused by network filesystem issues and truncated
      files.  (David Norwood, Michael Brown, J.W. Schultz)

    * Added a fix that should give ssh time to restore the tty settings
      if the user presses Ctrl-C at an ssh password prompt.

  INTERNAL:

    * Eliminated vestigial support for old versions that we stopped
      supporting. (J.W. Schultz)

    * Simplified some of the option-parsing code. (Wayne Davison)

    * Some cleanup made to the exclude code, as well as some new
      defines added to enhance readability. (Wayne Davison)

    * Changed the protocol-version code so that it can interact at a
      lower protocol level than the maximum supported by both sides.
      Added an undocumented option, --protocol=N, to force the value
      we advertise to the other side (primarily for testing purposes).
      (Wayne Davison)