David Dykstra [Thu, 18 Feb 1999 16:27:36 +0000 (16:27 +0000)]
Changed exclude/include matching so that normally wildcards will stop at
slashes. The old behavior of crossing slashes can be achieved by using a
double-asterisk ('**') anywhere in a pattern. Note that this can change
some existing exclude patterns in a subtle way. Also note that if the
remote side is an older release the processing on the two sides might not
be exactly the same when there's no double-asterisk, which can affect which
files are excluded from deletion, but they're close enough that people will
probably not notice. I considered changing the protocol version and
checking the remote_version number to ensure the same processing on both
sides, but the exclude patterns are pre-processed before the remote version
number is known and it's just not worth going through extraordinary efforts.
Suggested by Cameron Simpson <cs@zip.com.au>
Andrew Tridgell [Thu, 18 Feb 1999 03:48:24 +0000 (03:48 +0000)]
added --size-only option. Useful when starting to use rsync after a
ftp based mirror system so that timestamps may not be right.
David Dykstra [Wed, 17 Feb 1999 21:39:45 +0000 (21:39 +0000)]
Changed man page documentation of --force to say it is hardly ever needed
any more except in very obscure cases.
David Dykstra [Wed, 17 Feb 1999 19:34:40 +0000 (19:34 +0000)]
Added --copy-unsafe-links option which is like --copy-links except it is
only for symlinks that point outside the source tree. Suggested by Charles
Hines <chuck_hines@VNET.IBM.COM> in PR#1376. Also apply the option to any
symbolic links in the source portion of a path when --relative is used,
as suggested by Francis Montagnac <Francis.Montagnac@sophia.inria.fr> on
the rsync mailing list in a message titled "New option: --copy-parent-links".
David Dykstra [Mon, 15 Feb 1999 17:48:06 +0000 (17:48 +0000)]
Be consistent on use of '=' on options that take a parameter.
David Dykstra [Fri, 12 Feb 1999 17:27:22 +0000 (17:27 +0000)]
Change the implementation of memmove in lib/compat.c to call bcopy instead
of memcpy because bcopy is guaranteed to work with overlapping memory and
memcpy is not. Bug fix for PR#1584 in which log entries in the rsync
daemon log on Sunos 4.1.4 were garbled.
David Dykstra [Wed, 10 Feb 1999 22:16:32 +0000 (22:16 +0000)]
A slight compensation I had just added for total bytes read when using -v
was incorrect. It's hard to tell how many bytes are actually read because
transferring the value changes it and depending on its value it may
transfer 4 or 12 bytes so instead change the sender side to not include the
length of the counters it sends at all (it had been including one but three
are sent).
David Dykstra [Wed, 10 Feb 1999 21:54:12 +0000 (21:54 +0000)]
Allow --stats to work without -v.
David Dykstra [Wed, 10 Feb 1999 19:33:05 +0000 (19:33 +0000)]
Changed Usage in the rsync --help message to indicate how there can be
multiple SRCs. Also moved the --suffix option to show up right after
--backup and included the default backup suffix and block size along with
their corresponding options rather than at the end. Copied the new help
message to rsync.yo and README and used the Usage also in the SYNOPSIS
section at the top of rsync.yo rather than the different one that used
"path" instead of SRC and DEST. That last change was inspired by a
suggestion from Michael Bleyer in PR #1523.
David Dykstra [Wed, 10 Feb 1999 18:44:25 +0000 (18:44 +0000)]
Changed error message that just said "open %s: %s" to "cannot create %s: %s"
in receiver.c because it confuses people when they do something like
rsync /etc/passwd /tmp/nonexistentdir/passwd
and it printed out something like
open /tmp/noniexistentdir/.passwd.a004d5 : No such file or directory
Reported by kurt_granroth@pobox.com in PR #1253.
David Dykstra [Wed, 10 Feb 1999 18:03:59 +0000 (18:03 +0000)]
Changed the optimized include mode (which kicks in when there are a series
of non-wildcard includes followed by an exclude of *) so that it will silently
ignore included files that don't exist rather than saying "No such file or
directory". This is more like the behavior of the non-optimized include mode.
David Dykstra [Tue, 9 Feb 1999 22:31:52 +0000 (22:31 +0000)]
Support '#' and ';' comments in exclude files. It would actually not
probably cause any harm if they were treated as normal exclude or include
patterns because they just wouldn't match anything, but it's better to
explicitly ignore them. Suggested by David Holland <uholld1@lexis-nexis.com>
David Dykstra [Tue, 9 Feb 1999 19:27:15 +0000 (19:27 +0000)]
Added "strict modes" option. When set false (default is true), it allows
the secrets file to be readable by other users. Added to support the Windows
port under cygwin. Problem reported by Martin Krumpolec krumpo@pobox.sk
David Dykstra [Tue, 9 Feb 1999 18:35:29 +0000 (18:35 +0000)]
Use MAXHOSTNAMELEN (256) for the array holding the host_name in socket.c
instead of 200. Move the defines of True and False to rsync.h. Eliminate
the defines of BOOL in loadparm.c and params.c because it is already
defined in rsync.h. Changes suggested by Roman Gollent roman.gollent@wdr.com
David Dykstra [Tue, 9 Feb 1999 17:25:35 +0000 (17:25 +0000)]
Add --quiet/-q option. Contributed by Rich Salz salzr@certco.com.
David Dykstra [Wed, 3 Feb 1999 15:38:06 +0000 (15:38 +0000)]
Move the initialization of push_dir, which calls getcwd, to early in main.
The reason for that is that on SVR2-based UTS 2.1.2 (which along with many
other old systems implements getcwd by forking "pwd") getcwd hangs when
called when other child processes are running.
I also added a quick return from push_dir if name == NULL so it doesn't
actually have to chdir anywhere when just initializing.
An initializing call to push_dir("/",0) had previously been put in at the
beginning of daemon_main() to avoid calling getcwd after a chroot, but
since that is no longer I needed I removed it and changed the call to
chdir("/") after chroot into a push_dir("/",0) so it will remember the
correct current directory.
David Dykstra [Wed, 3 Feb 1999 15:15:56 +0000 (15:15 +0000)]
When calling lchown, pass the current known uid and gid rather than -1
to not change it, since the old SVR2-based UTS 2.1.2 does not support
leaving uid and gid alone when the value is -1.
David Dykstra [Wed, 3 Feb 1999 15:11:40 +0000 (15:11 +0000)]
Add alternate implementation of waitpid() for systems that have wait4 but
not wait3, in particular Amdahl's SVR2-based UTS 2.1.2. The code comes
from apache, but I contributed it to apache in the first place.
David Dykstra [Thu, 21 Jan 1999 17:10:32 +0000 (17:10 +0000)]
Fix serious bug with "use chroot = no" option which caused "uid =" and "gid ="
to be ignored. At the same time, change the "uid =" and "gid =" options to
be ignored when not running the daemon as super-user, to make it more
convenient for those people and to make it portable to systems such as
cygwin which don't support the uid/gid notions.
David Dykstra [Wed, 20 Jan 1999 21:32:46 +0000 (21:32 +0000)]
Document the fact that the %t log format option includes the date, and
that the "log file" option always prepends "%t [%p] ".
David Dykstra [Mon, 11 Jan 1999 17:07:27 +0000 (17:07 +0000)]
Fix segmentation fault when using -vvv. Suggested by assar@sics.se.
Andrew Tridgell [Fri, 8 Jan 1999 10:42:29 +0000 (10:42 +0000)]
fixed bug where strtok() could return NULL in getpassf().
Andrew Tridgell [Fri, 8 Jan 1999 10:32:56 +0000 (10:32 +0000)]
added --password-file patch from Alex Schlessinger <alex@inconnect.com>
(yes, I know I'm not supposed to be doing rsync work at the moment!
only four weeks to go ...)
Andrew Tridgell [Fri, 8 Jan 1999 07:51:25 +0000 (07:51 +0000)]
made the "max connections" and "lock file" local rather than global
options so you can set them on a per-module basis (requested by
kernel.org mirror maintiner)
David Dykstra [Thu, 7 Jan 1999 16:27:38 +0000 (16:27 +0000)]
Ran yodl2man on yo, and updated modification date.
Andrew Tridgell [Thu, 7 Jan 1999 07:19:03 +0000 (07:19 +0000)]
add warning about using RSYNC_PASSWORD on systems where env varibables
are visible to all users.
David Dykstra [Tue, 5 Jan 1999 20:08:45 +0000 (20:08 +0000)]
Change the receive log message from "send" to "recv". Fix from
Rick Smith <rick@rbsmith.com>.
Andrew Tridgell [Tue, 5 Jan 1999 06:43:59 +0000 (06:43 +0000)]
moved the block length mismatch code to another part of the loop.
Andrew Tridgell [Tue, 5 Jan 1999 06:31:58 +0000 (06:31 +0000)]
don't try to match checksums of two blocks which are of unequal
size. This explains the high false_alarms rate that I saw for one of
the sample data files used in my thesis.
The bug was harmless as the strong checksum easily caught all the
false matches but it's been bugging me as I couldn't explain it :)
Andrew Tridgell [Tue, 5 Jan 1999 01:57:13 +0000 (01:57 +0000)]
fixed a bug in the adjacent target optimisation
Andrew Tridgell [Tue, 5 Jan 1999 01:15:32 +0000 (01:15 +0000)]
an optimization that tries to make rsync choose adjacent matches if
multiple matching blocks are available. This make the run-length
coding of the output more efficient.
Andrew Tridgell [Wed, 30 Dec 1998 14:48:45 +0000 (14:48 +0000)]
no longer use mmap() in rsync because of the risk of a SIGBUS when
another program (such as a mailer) truncates a file.
To offset the speed loss I have rewritten the map_ptr() code to make
much better use of read().
David Dykstra [Mon, 7 Dec 1998 18:48:46 +0000 (18:48 +0000)]
steve.ingram@icl-gis.com noticed several mistakes in 1. Some of
them had already been fixed but yodl2man hadn't been run, and a couple
others were new.
David Dykstra [Mon, 7 Dec 1998 14:51:32 +0000 (14:51 +0000)]
Fix minor man page typo, suggested by jbm@jbm.org.
Andrew Tridgell [Sat, 5 Dec 1998 01:56:45 +0000 (01:56 +0000)]
paranoia change - treat list_only like read_only and refuse all
syscalls that might change the filesystem. This shouldn't be needed,
but I like paranoid coding :)
Andrew Tridgell [Sat, 5 Dec 1998 01:55:37 +0000 (01:55 +0000)]
- slprintf() takes sizeof(buf) not sizeof(buf)-1
- fixed incorrect format string in rename error
David Dykstra [Tue, 1 Dec 1998 16:13:25 +0000 (16:13 +0000)]
Support newer rpm's which define $RPM_OPT_FLAGS as a set of options
separated by spaces. Suggested by pavel_roskin@geocities.com.
David Dykstra [Tue, 1 Dec 1998 16:11:40 +0000 (16:11 +0000)]
Minor documentation change suggested by pavel_roskin@geocities.com.
rsync-bugs [Wed, 25 Nov 1998 16:24:56 +0000 (16:24 +0000)]
preparing for release of 2.2.1
David Dykstra [Wed, 25 Nov 1998 15:37:50 +0000 (15:37 +0000)]
Back out change that treated "refuse options = compress" the same as
"dont compress = *", by request of Tridge. Instead, mention the difference
in the man page. Also, put in a shortcut in set_compression() to recognize
"*" earlier instead of going through malloc/strtok/fnmatch/free cycle.
David Dykstra [Tue, 24 Nov 1998 22:03:16 +0000 (22:03 +0000)]
When "refuse options = compress" is set in rsyncd.conf, silently send files
at compression level 0 instead of printing an error and exitting. This is
the same effect as "dont compress = *".
David Dykstra [Tue, 24 Nov 1998 21:26:38 +0000 (21:26 +0000)]
Always include "." when processing exclude lists. This avoids confusion
when people do --exclude "*". Also, add an example to the man page that
shows explicitly including parent directories when itemizing specific
paths to include followed by --exclude "*".
David Dykstra [Tue, 24 Nov 1998 20:54:56 +0000 (20:54 +0000)]
Update the README file to reflect current usage options.
David Dykstra [Tue, 24 Nov 1998 20:51:45 +0000 (20:51 +0000)]
Don't list cleaned-out duplicate file names as "<NULL>" when doing
list_only mode; skip them instead.
David Dykstra [Tue, 24 Nov 1998 20:18:11 +0000 (20:18 +0000)]
Change sanitize_path() function to not malloc a copy since it only shrinks
paths and it is only used in places that have already just done a copy.
David Dykstra [Tue, 24 Nov 1998 19:52:35 +0000 (19:52 +0000)]
Make sure secrets file is not other-accessible, and owned by root if the
daemon is running as root. Suggested by
Mike Richardson <mike@quaking.demon.co.uk>
David Dykstra [Tue, 24 Nov 1998 19:10:21 +0000 (19:10 +0000)]
Always add the O_BINARY flag in do_open if it is defined, for Windows.
Suggestion from Mart.Laak@hansa.ee
David Dykstra [Tue, 24 Nov 1998 19:01:24 +0000 (19:01 +0000)]
Backup deleted files when using --delete and --backup. Based on a
suggested patch from Kanai Makoto (kanai@hallab.co.jp).
David Dykstra [Mon, 23 Nov 1998 21:54:01 +0000 (21:54 +0000)]
Add "include" and "include from" rsyncd.conf options. Contributed
by Dennis Gilbert <dennis@oit.pdx.edu>.
Andrew Tridgell [Mon, 23 Nov 1998 00:30:27 +0000 (00:30 +0000)]
updates to reflect new samba.org domain
the main web site is now http://rsync.samba.org/
Andrew Tridgell [Fri, 20 Nov 1998 22:46:42 +0000 (22:46 +0000)]
changed an example slightly
Andrew Tridgell [Fri, 20 Nov 1998 22:26:29 +0000 (22:26 +0000)]
added "dont compress" option with the default setting of
*.gz *.tgz *.zip *.z *.rpm *.deb
Andrew Tridgell [Thu, 19 Nov 1998 06:45:21 +0000 (06:45 +0000)]
improved the "refuse options" code a bit
Andrew Tridgell [Thu, 19 Nov 1998 06:35:49 +0000 (06:35 +0000)]
added "refuse options" option
David Dykstra [Wed, 18 Nov 1998 17:53:22 +0000 (17:53 +0000)]
Look for strcasecmp in -lresolv for Unixware.
David Dykstra [Wed, 18 Nov 1998 17:36:36 +0000 (17:36 +0000)]
Minor documentation patches, due mostly to
Jason Henry Parker <henry@freezer.humbug.org.au>
David Dykstra [Wed, 18 Nov 1998 16:20:22 +0000 (16:20 +0000)]
Change --log-format documentation to make it clear that it is for the client
logging to stdout.
David Dykstra [Wed, 18 Nov 1998 16:02:23 +0000 (16:02 +0000)]
Remove a debugging statement I accidentally included in the last commit.
David Dykstra [Wed, 18 Nov 1998 15:54:50 +0000 (15:54 +0000)]
Change documentation to explain that a lack of -t in effect causes -I to be
assumed on the next transfer.
David Dykstra [Tue, 17 Nov 1998 21:56:18 +0000 (21:56 +0000)]
Apply sanitize_paths() to glob expansions when use chroot = no.
Andrew Tridgell [Mon, 16 Nov 1998 23:50:28 +0000 (23:50 +0000)]
don't interpret %h and %a when using --log-format locally
Andrew Tridgell [Mon, 16 Nov 1998 03:53:43 +0000 (03:53 +0000)]
fixed a bug handling files larger than 2GB
Andrew Tridgell [Sun, 15 Nov 1998 01:21:42 +0000 (01:21 +0000)]
log filename(line) in exit_cleanup() to make tracking down problems
easier in rsync daemons.
Andrew Tridgell [Sun, 15 Nov 1998 01:04:16 +0000 (01:04 +0000)]
use native strlcat() and strlcpy() if available
Andrew Tridgell [Sat, 14 Nov 1998 23:49:08 +0000 (23:49 +0000)]
compile with optimisation by default on all compilers
(the mdfour code really needs it)
Andrew Tridgell [Sat, 14 Nov 1998 23:31:58 +0000 (23:31 +0000)]
changed strlcat() and strlcpy() to have the same semantics as the
OpenBSD functions of the same name.
changed slprintf() to take buffer length rather than buffer length -1
David Dykstra [Fri, 6 Nov 1998 17:07:07 +0000 (17:07 +0000)]
Change sanitize_path() to not use clean_fname() because it removes the
trailing slash. This caused a problem when using "use chroot" and sources
that contained a trailing slash (which prevents the last filename component
of the source from being included in the destination). Instead, have
sanitize_path() remove "." components and duplicated slashes ("//") itself.
Andrew Tridgell [Fri, 6 Nov 1998 10:37:10 +0000 (10:37 +0000)]
fixed typo
David Dykstra [Thu, 5 Nov 1998 14:33:38 +0000 (14:33 +0000)]
Add comment before call to mktemp saying it is deliberately chosen over
mkstemp.
David Dykstra [Wed, 4 Nov 1998 16:47:33 +0000 (16:47 +0000)]
Fix confusion between RERR_NOSUPPORT and RERR_UNSUPPORTED for exit codes
that indicate a feature is not supported. Two places that are normally
ifdefed out used RERR_UNSUPPORTED whereas one other place and errcode.h
used RERR_NOSUPPORT. Changed them all to consistently use RERR_UNSUPPORTED.
The two things that had the bad values were #ifndef SUPPORT_LINKS and
#ifdef NO_INT64. The former is probably for non-Unix operating systems
and the latter was at least on the default Unixware compiler.
Andrew Tridgell [Wed, 4 Nov 1998 03:14:22 +0000 (03:14 +0000)]
added timeout option in rsyncd.conf
Andrew Tridgell [Wed, 4 Nov 1998 02:35:18 +0000 (02:35 +0000)]
use macros to make mdfour faster on systems that don't do inlining
well. Also helps when optimisation level is low.
David Dykstra [Tue, 3 Nov 1998 22:30:52 +0000 (22:30 +0000)]
Remove statement in 1 that a URL can only be used if
a username is not needed.
rsync-bugs [Tue, 3 Nov 1998 22:00:59 +0000 (22:00 +0000)]
preparing for release of 2.2.0
David Dykstra [Tue, 3 Nov 1998 21:58:08 +0000 (21:58 +0000)]
Document the fact that you can use [USER@] in an rsync URL.
Note: the same thing works for ftp and http URLs in netscape.
David Dykstra [Tue, 3 Nov 1998 21:49:38 +0000 (21:49 +0000)]
Call clean_fname() in sanitize_path() to catch some more strange but
legal file name syntaxes.
David Dykstra [Tue, 3 Nov 1998 21:17:40 +0000 (21:17 +0000)]
Add support for optional ":PORT" in rsync URL.
Andrew Tridgell [Tue, 3 Nov 1998 07:08:27 +0000 (07:08 +0000)]
patch from Alberto Accomazzi <aaccomazzi@cfa.harvard.edu> to add
different exit codes for different conditions.
Andrew Tridgell [Tue, 3 Nov 1998 05:14:41 +0000 (05:14 +0000)]
documented --delete disabling on IO errors
Andrew Tridgell [Tue, 3 Nov 1998 03:48:47 +0000 (03:48 +0000)]
added the --log-format option to allow users to request arbitrary
per-file logging of interactive rsync sessions.
Andrew Tridgell [Mon, 2 Nov 1998 07:26:36 +0000 (07:26 +0000)]
remove double / from filenames in display
Andrew Tridgell [Mon, 2 Nov 1998 06:40:11 +0000 (06:40 +0000)]
the logging wasn't showing the full prefix for filenames
Andrew Tridgell [Mon, 2 Nov 1998 04:17:56 +0000 (04:17 +0000)]
Jason told me that's its very important for his site to log exactly
how many bytes were needed to be transferred for each file. I added %b
and %c log format options to cover this. See the man page for details.
Andrew Tridgell [Mon, 2 Nov 1998 00:55:21 +0000 (00:55 +0000)]
- document the rsync:// URL format
Andrew Tridgell [Mon, 2 Nov 1998 00:52:01 +0000 (00:52 +0000)]
if no local destination is provided for the transfer then provide
a "ls -l" style listing of the files that would be transferred
Andrew Tridgell [Sat, 31 Oct 1998 04:35:44 +0000 (04:35 +0000)]
added copyright notice from Patrick Powell
Andrew Tridgell [Sat, 31 Oct 1998 00:12:59 +0000 (00:12 +0000)]
get the date comparison the right way around
Andrew Tridgell [Fri, 30 Oct 1998 23:50:12 +0000 (23:50 +0000)]
use the orig_umask when choosing perms for the log file.
Andrew Tridgell [Fri, 30 Oct 1998 23:03:08 +0000 (23:03 +0000)]
fixed perms on rsyncd log file
Andrew Tridgell [Fri, 30 Oct 1998 11:18:38 +0000 (11:18 +0000)]
move the time init before the logfile opening.
Andrew Tridgell [Fri, 30 Oct 1998 06:12:14 +0000 (06:12 +0000)]
added a perl script to summarise the rsyncd log format
Andrew Tridgell [Fri, 30 Oct 1998 05:53:05 +0000 (05:53 +0000)]
added %m, %P and %u options to logging
Andrew Tridgell [Fri, 30 Oct 1998 02:52:42 +0000 (02:52 +0000)]
need BIG_ENDIAN test for inet_ntoa replacement
Andrew Tridgell [Fri, 30 Oct 1998 02:50:02 +0000 (02:50 +0000)]
check for a broken inet_ntoa() on IRIX
Andrew Tridgell [Fri, 30 Oct 1998 02:43:10 +0000 (02:43 +0000)]
get null termination right in logging
Andrew Tridgell [Fri, 30 Oct 1998 02:36:05 +0000 (02:36 +0000)]
get null termination right in logging
Andrew Tridgell [Fri, 30 Oct 1998 02:32:29 +0000 (02:32 +0000)]
hopefuly fix logging of "transfer interrupted" messages
Andrew Tridgell [Fri, 30 Oct 1998 02:24:47 +0000 (02:24 +0000)]
added "log format" option to allow admins to choose the format for
rsyncd log file entries
Andrew Tridgell [Fri, 30 Oct 1998 02:23:01 +0000 (02:23 +0000)]
hanle null strings in -vvv output
Andrew Tridgell [Thu, 29 Oct 1998 23:44:30 +0000 (23:44 +0000)]
fixed cacheing of some values (using code from Samba)